- 08 7月, 2011 5 次提交
-
-
由 Lydia Wang 提交于
For VT2002P, VT1802 and VT1812 codecs, there're only two DACs. So smart51 control shouldn't be created. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
For VT2002P, VT1802 and VT1812 codecs, the original activate_output_path() function can't initialize output and hp path correctly, since mixers connected to output pin widgets are not considered. So modify the activate_output_path() function to satisify this kind of codec. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Put the all static quirk codes out of patch_realtek.c, split into the file for each codec model. For controlling the build of quirk codes, a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced. By setting this off, all quirk codes won't be built, thus you can save lots of memory. The codes in patch_realtek.c are also shuffled and more comments are given, but the contents aren't changed. This is just a refactoring. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Avoid open-codes. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
This patch changes the auto-parser and the auto-mic handling codes to allow more flexible dynamic ADC-switching with Realtek codecs. In the new code, the following strategy is taken: - When a cap-src can't handle all input-sources, either skip it, or switch to the ADC-switching mode. In ADC-switching mode, like the former dual-ADC mode for ALC275, it changes ADC on the fly according to the current input source. - When auto-mic is possible, always assign imux. If the mic pins are set statically via a quirk, rebuild imux according to the pins. In the auto-mic mode, the driver always changes the imux (although the imux isn't exposed as a mixer element). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 07 7月, 2011 12 次提交
-
-
由 Takashi Iwai 提交于
The digital out pin on ALC882 may have multiple connections. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Instead of assigning each default hda_pcm_stream pointers, do NULL-checks and assign default values in alc_build_pcms(). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The only different implmentation was alc880_auto_init_input_src(), and now it covers this variant, and we can use the single function for all codecs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Now with the new code for looking for ADCs and MUXs, we can replace the whole ADC assignment with the parsed results. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
All alc*_auto_init_analog_input() calls are identical, so let's use the same function more clearly without aliases. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Parse ADCs and cap-srcs in alc_auto_create_input_ctls() by itself instead of passing explicitly from the caller. By this change, all alc*_auto_create_input_ctls() can be unified to the same calls. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Use the same common code for auto-parsing the output paths and their initializations, based on the existing ALC662 code, which is smarter than the old ALC880/2 code. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
When multiple inputs are present on the mixer widget (typically a DAC and a loopback), mute/unmute both inputs with the corresponding mixer element. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The initialization of DACs was missing in ALC662 parser code. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
In alc662_auto_fill_dac_nids(), the HP and speaker DACs aren't parsed when the corresponding pins aren't fixed with single DACs. Now check these DACs even for non-fixed pins. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
When the dual-adc switching mode is active in Realtek auto-parser, we need to couple all ADCs as a single capture-volume. Currently, the volume control changes only the first ADC, thus others may remain silent. This patch fixes the problem. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 06 7月, 2011 1 次提交
-
-
由 Kailang Yang 提交于
Add the support of ALC269VC codec. Also delete the unnecessary codec_variant type enum list: now only three variants (ALC269VA ALC269VB ALC269VC) are needed. In addition, added some aliases: - Add ALC269VB alias name ALC277 - Add ALC269VC alias name ALC259 ALC281X - Add ALC269VC for Lenovo device 0x21f3 name ALC3202 Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 7月, 2011 5 次提交
-
-
由 Takashi Iwai 提交于
Since we now route the front DAC via aa-mix widget, adding the aa-mix to surrounds will result in a mix-up of both front and surround PCM signals. For avoiding this, the aa-mix routes have to be disabled for surround paths. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
When the individual DAC is available for the headphone output, the driver should create the DAC for its volume control. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
For VT1718S, the multi-channel path should be like following: DAC 0-->Mixer 9(index 5)-->Mixer 0(index 1)-->Front Pin; DAC 1-->Mixer 1(index 0)-->Surround Pin; DAC 2-->C/LFE Pin; DAC 3-->Mixer 2(index 0)-->Side Pin; But current code built Surround and Side path through index 1 of Mixer 1 and 2. So Adjusting Surround and Side channel amplifier is invalid. This patch fixes the issue. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
For VT1718S, Mixer 9 doesn't expose the connection to DAC 0. So when building up a 'PCM Playback' amplifier control, it will fail since getting DAC 0 index of Mixer 9 returned -1. So I added a dac_mixer_idx to indicated the actual index of DAC 0 to Mixer 9. Following is the patch and next mail is another. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 7月, 2011 2 次提交
-
-
由 Lydia Wang 提交于
Unmute DAC on front speaker path when Independent HP is enabled. When to enable Independent HP, the front speaker won't output any sound for VT1708, VT1708B, VT1708S and VT1702. I find the via_independent_hp_put() routine will mute DAC 0 path in Mixer 0. For these codecs, when using Independent HP, there could have two independent streams, one is from DAC0-->Mixer0-->Front Pin, the other is from DAC3-->GainSW3-->Side Pin. So I added a check for DAC-->Mixer path in activate_output_path(). If current path is DAC-->Mixer, no need to mute DAC index in Mixer. In fact, to change connection of Headphone pin or Mux connected with HP is enough. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
A missing initialization resulted in wrong DAC assignments in ALC662 (and other) auto-parsers. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 30 6月, 2011 4 次提交
-
-
由 Takashi Iwai 提交于
This patch adds the re-implementation of Independent-HP mode in the case where the DAC is shared between HP and side-channel streams. Now the driver tries to parse the output-path using the pre-parsed side-channel DAC for the independent HP output, too. When a playback PCM stream is opened with this shared mode, the Independent-HP mixer switch can't be changed for avoiding the conflict, thus it returns -EBUSY error. One remaining unintuitive issue is that the DAC volume is still controlled as "Side" volume although it's shared by both independent-HP and side streams. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
One of ioctl definition in sound/sb16_csp.h contains the data size over 8kB, and this causes build errors on architectures like MIPS, which define _IOC_SIZEBITS=13. For avoiding this build errors but keeping the compatibility, manually expand with _IOC() instead of using _IOW() for the problematic ioctl. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The char can be unsigned on some architectures. Since the code checks the negative values, they should be declared as signed char explicitly. sound/pci/rme9652/hdspm.c:5449: warning: comparison is always false due to limited range of data type sound/pci/rme9652/hdspm.c:5462: warning: comparison is always false due to limited range of data type Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Fix the wrongly converted short values: sound/pci/cs5535audio/cs5535audio_pcm.c:152: warning: large integer implicitly truncated to unsigned type sound/pci/cs5535audio/cs5535audio_pcm.c:160: warning: large integer implicitly truncated to unsigned type Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 29 6月, 2011 7 次提交
-
-
由 Wu Fengguang 提交于
I noticed that the last character of the ELD monitor name is lost, this fixes the issue. This fix should be confirming to the HDA spec, and works together with the DRM part of the ELD patch. The HDA spec does not mention that Monitor_Name_String is an '\0' ending string, and it allows NML to be 1, which is only valid when MNL does not count the possible ending '\0'. Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
Move codec init verb which is only applicatable for VT1708. I've found the root cause that jack plugged in can't be detected. The verb in vt1708_init_verbs is used to power down jack detect circuit. This verb is only applicable to VT1708. vt1708 didn't implement jack detect function in hardware, so we should shut down this function to avoid noise. But for other codecs, hardware implement jack detect function. If sending this verb during initialization, jack detect will be invalid. So I move this verb from via_parse_auto_config() to patch_vt1708(). Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
sound/pci/hda/patch_cmedia.c: In function ‘cmi9880_fill_multi_init’: sound/pci/hda/patch_cmedia.c:401:15: warning: unused variable ‘len’ Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Let's use auto-parser as default now. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
Create snd_hda_get_conn_index() helper function for obtaining the connection index of the widget. Replaced the similar codes used in several codec-drivers with this common helper. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
Fix a issue to enable unsolicited response to line-out pins. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 28 6月, 2011 4 次提交
-
-
由 Hans-Christian Egtvedt 提交于
This patch updates the email address of the sound drivers supported by me to an email account I will use on a more regular basis in the future. Signed-off-by: NHans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 David Henningsson 提交于
Since we're not using the new auto parser as a fallback yet, add it manually as a quirk. Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 David Henningsson 提交于
Conexant ID 506c was found on Acer Aspire 3830TG. As users report no playback, sending to stable should be safe. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/783582 Reported-by: andROOM Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Use static inline for dummy function to fix the warnings like below sound/pci/hda/patch_sigmatel.c: In function ‘stac92xx_init’: sound/pci/hda/patch_sigmatel.c:4387:3: warning: statement with no effect sound/pci/hda/patch_sigmatel.c: In function ‘stac92xx_resume’: sound/pci/hda/patch_sigmatel.c:4927:3: warning: statement with no effect Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-