- 04 7月, 2006 1 次提交
-
-
由 Arjan van de Ven 提交于
The quota code plays interesting games with the lock ordering; to quote Jan: | i_mutex of inode containing quota file is acquired after all other | quota locks. i_mutex of all other inodes is acquired before quota | locks. Quota code makes sure (by resetting inode operations and | setting special flag on inode) that noone tries to enter quota code | while holding i_mutex on a quota file... The good news is that all of this special case i_mutex grabbing happens in the (per filesystem) low level quota write function. For this special case we need a new I_MUTEX_* nesting level, since this just entirely outside any of the regular VFS locking rules for i_mutex. I trust Jan on his blue eyes that this is not ever going to deadlock; and based on that the patch below is what it takes to inform lockdep of these very interesting new locking rules. The new locking rule for the I_MUTEX_QUOTA nesting level is that this is the deepest possible level of nesting for i_mutex, and that this only should be used in quota write (and possibly read) function of filesystems. This makes the lock ordering of the I_MUTEX_* levels: I_MUTEX_PARENT -> I_MUTEX_CHILD -> I_MUTEX_NORMAL -> I_MUTEX_QUOTA Has no effect on non-lockdep kernels. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Acked-by: NIngo Molnar <mingo@elte.hu> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 02 7月, 2006 1 次提交
-
-
由 Evgeniy Dushistov 提交于
This patch fixes buggy behaviour of UFS in such kind of scenario: open(, O_TRUNC...) ftruncate(, 1024) ftruncate(, 0) Such a scenario causes ufs_panic and remount read-only. This happen because of according to specification UFS should always allocate block for last byte, and many parts of our implementation rely on this, but `ufs_truncate' doesn't care about this. To make possible return error code and to know about old size, this patch removes `truncate' from ufs inode_operations and uses `setattr' method to call ufs_truncate. Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 7月, 2006 1 次提交
-
-
由 Jörn Engel 提交于
Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 30 6月, 2006 1 次提交
-
-
由 Andrew Morton 提交于
fs/ufs/inode.c: In function `ufs_frag_map': fs/ufs/inode.c:101: warning: long long unsigned int format, u64 arg (arg 4) fs/ufs/inode.c: In function `ufs_getfrag_block': fs/ufs/inode.c:432: warning: long long unsigned int format, u64 arg (arg 2) Cc: Evgeniy Dushistov <dushistov@mail.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 29 6月, 2006 1 次提交
-
-
由 Christoph Hellwig 提交于
Same as with already do with the file operations: keep them in .rodata and prevents people from doing runtime patching. Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: Steven French <sfrench@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 28 6月, 2006 1 次提交
-
-
由 Evgeniy Dushistov 提交于
Add missed ufsi->i_dir_start_lookup initialization in ufs_read_inode in UFS2 case. Also it cleans ufs_read_inode function to prevent such kind of situation in the future: it move depend on UFS type parts of code into separate functions and leaves in ufs_read_inode only generic code. It cleans code and avoids duplication. Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 26 6月, 2006 19 次提交
-
-
由 Adrian Bunk 提交于
Make two needlessly global functions static. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Evgeniy Dushistov 提交于
In ufs code there is function: ubh_ll_rw_block, it has parameter how many ufs_buffer_head it should handle, but it always called with "1" on the place of this parameter. This patch removes unused parameter of "ubh_ll_wr_block". Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Evgeniy Dushistov 提交于
ufs super block contains some statistic about file systems, like amount of directories, free blocks, inodes and so on. UFS1 hold this information in one location and uses 32bit integers for such information, UFS2 hold statistic in another location and uses 64bit integers. There is transition variant, if UFS1 has type 44BSD and flags field in super block has some special value this mean that we work with statistic like UFS2 does. and this also means that nobody care about old(UFS1) statistic. So if start fsck against such file system, after usage linux ufs driver, it found error: at now only UFS1 like statistic is updated. This patch should fix this. Also it contains some minor cleanup: CodingSytle and remove unused variables. Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Evgeniy Dushistov 提交于
Presently ufs doesn't support "fsync", this make some applications unhappy, for example vim. This patch fixes this situation. Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Evgeniy Dushistov 提交于
Super block of UFS usually has size >512, because of fragment size may be 512, this cause some problems. Currently, there are two methods to work with ufs super block: 1) split structure which describes ufs super blocks into structures with size <=512 2) use one structure which describes ufs super block, and hope that array of "buffer_head" which holds "super block", has such construction: bh[n]->b_data + bh[n]->b_size == bh[n + 1]->b_data The second variant may cause some problems in the future, and usage of two variants cause unnecessary code duplication. This patch remove the second variant. Also patch contains some CodingStyle fixes. Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Evgeniy Dushistov 提交于
This patch fixes two bugs, which introduced by previous patches: 1) Missed "brelse" 2) Sometimes "baseblk" may be wrongly calculated, if i_size is equal to zero, which lead infinite cycle in "mpage_writepages". Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
fs/ufs/super.c: In function `ufs_print_super_stuff': fs/ufs/super.c:103: warning: unsigned int format, different type arg (arg 2) fs/ufs/super.c: In function `ufs2_print_super_stuff': fs/ufs/super.c:147: warning: unsigned int format, different type arg (arg 2) fs/ufs/super.c: In function `ufs_print_cylinder_stuff': fs/ufs/super.c:175: warning: unsigned int format, different type arg (arg 2) Cc: Evgeniy Dushistov <dushistov@mail.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Evgeniy Dushistov 提交于
Presently if we allocate several "metadata" blocks (pointers to indirect blocks for example), we fill with zeroes only the first block. This cause some problems in "truncate" function. Also this patch remove some unused arguments from several functions and add comments. Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Evgeniy Dushistov 提交于
ufs_free_blocks function looks now in so way: if (err) goto failed; lock_super(); failed: unlock_super(); So if error happen we'll unlock not locked super. Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Evgeniy Dushistov 提交于
At now UFS code uses DQUOT_* mechanism, but it also update inode->i_blocks manually, this cause wrong i_blocks value. Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Evgeniy Dushistov 提交于
This patch make little optimization of ufs_find_entry like "ext2" does. Save number of page and reuse it again in the next call. Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Evgeniy Dushistov 提交于
Currently to turn on debug mode "user" has to edit ~10 files, to turn off he has to do it again. This patch introduce such changes: 1)turn on(off) debug messages via ".config" 2)remove unnecessary duplication of code 3)make "UFSD" macros more similar to function 4)fix some compiler warnings Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Evgeniy Dushistov 提交于
The writing to UFS file system with block/fragment!=8 may cause bogus behaviour. The problem in "ufs_bitmap_search" function, which doesn't work correctly in "block/fragment!=8" case. The idea is stolen from BSD code. Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Evgeniy Dushistov 提交于
There are two ugly macros in ufs code: #define UCPI_UBH ((struct ufs_buffer_head *)ucpi) #define USPI_UBH ((struct ufs_buffer_head *)uspi) when uspi looks like struct { struct ufs_buffer_head ; } and USPI_UBH has some sence, ucpi looks like struct { struct not_ufs_buffer_head; } To prevent bugs in future, this patch convert macros to inline function and fix "ucpi" structure. Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Evgeniy Dushistov 提交于
Change function in fs/ufs/dir.c and fs/ufs/namei.c to work with pages instead of straight work with blocks. It fixed such bugs: * for i in `seq 1 1000`; do touch $i; done - crash system * mkdir create directory without "." and ".." entries Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Evgeniy Dushistov 提交于
This series of patches finished "bugs fixing" mentioned here http://lkml.org/lkml/2006/1/31/275 . The main bugs: * for i in `seq 1 1000`; do touch $i; done - crash system * mkdir create directory without "." and ".." entries The suggested solution is work with page cache instead of straight work with blocks. Such solution has following advantages * reduce code size and its complexity * some global locks go away * fix bugs The most part of code is stolen from ext2, because of it has similar directory structure. Patches testes with UFS1 and UFS2 file systems. This patch installs i_mapping->a_ops for directory inodes and removes some duplicated code. Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Evgeniy Dushistov 提交于
First of all some necessary notes about UFS by it self: To avoid waste of disk space the tail of file consists not from blocks (which is ordinary big enough, 16K usually), it consists from fragments(which is ordinary 2K). When file is growing its tail occupy 1 fragment, 2 fragments... At some stage decision to allocate whole block is made and all fragments are moved to one block. How this situation was handled before: ufs_prepare_write ->block_prepare_write ->ufs_getfrag_block ->... ->ufs_new_fragments: bh = sb_bread bh->b_blocknr = result + i; mark_buffer_dirty (bh); This is wrong solution, because: - it didn't take into consideration that there is another cache: "inode page cache" - because of sb_getblk uses not b_blocknr, (it uses page->index) to find certain block, this breaks sb_getblk. How this situation is handled now: we go though all "page inode cache", if there are no such page in cache we load it into cache, and change b_blocknr. Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Evgeniy Dushistov 提交于
* After block allocation, we map it on the same "address" as 8 others blocks * We nullify block several times: once in ufs/block.c and once in block_*write_full_page, and use different "caches" for this. Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Evgeniy Dushistov 提交于
Currently, ufs write support have two sets of problems: work with files and work with directories. This series of patches should solve the first problem. This patch is similar to http://lkml.org/lkml/2006/1/17/61 this patch complements it. The situation the same: in ufs_trunc_(not direct), we read block, check if count of links to it is equal to one, if so we finish cycle, if not continue. Because of "count of links" always >=2 this operation cause infinite cycle and hang up the kernel. Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 23 6月, 2006 2 次提交
-
-
由 David Howells 提交于
Give the statfs superblock operation a dentry pointer rather than a superblock pointer. This complements the get_sb() patch. That reduced the significance of sb->s_root, allowing NFS to place a fake root there. However, NFS does require a dentry to use as a target for the statfs operation. This permits the root in the vfsmount to be used instead. linux/mount.h has been added where necessary to make allyesconfig build successfully. Interest has also been expressed for use with the FUSE and XFS filesystems. Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: Nathan Scott <nathans@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Howells 提交于
Extend the get_sb() filesystem operation to take an extra argument that permits the VFS to pass in the target vfsmount that defines the mountpoint. The filesystem is then required to manually set the superblock and root dentry pointers. For most filesystems, this should be done with simple_set_mnt() which will set the superblock pointer and then set the root dentry to the superblock's s_root (as per the old default behaviour). The get_sb() op now returns an integer as there's now no need to return the superblock pointer. This patch permits a superblock to be implicitly shared amongst several mount points, such as can be done with NFS to avoid potential inode aliasing. In such a case, simple_set_mnt() would not be called, and instead the mnt_root and mnt_sb would be set directly. The patch also makes the following changes: (*) the get_sb_*() convenience functions in the core kernel now take a vfsmount pointer argument and return an integer, so most filesystems have to change very little. (*) If one of the convenience function is not used, then get_sb() should normally call simple_set_mnt() to instantiate the vfsmount. This will always return 0, and so can be tail-called from get_sb(). (*) generic_shutdown_super() now calls shrink_dcache_sb() to clean up the dcache upon superblock destruction rather than shrink_dcache_anon(). This is required because the superblock may now have multiple trees that aren't actually bound to s_root, but that still need to be cleaned up. The currently called functions assume that the whole tree is rooted at s_root, and that anonymous dentries are not the roots of trees which results in dentries being left unculled. However, with the way NFS superblock sharing are currently set to be implemented, these assumptions are violated: the root of the filesystem is simply a dummy dentry and inode (the real inode for '/' may well be inaccessible), and all the vfsmounts are rooted on anonymous[*] dentries with child trees. [*] Anonymous until discovered from another tree. (*) The documentation has been adjusted, including the additional bit of changing ext2_* into foo_* in the documentation. [akpm@osdl.org: convert ipath_fs, do other stuff] Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: Nathan Scott <nathans@sgi.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 29 3月, 2006 1 次提交
-
-
由 Arjan van de Ven 提交于
This is a conversion to make the various file_operations structs in fs/ const. Basically a regexp job, with a few manual fixups The goal is both to increase correctness (harder to accidentally write to shared datastructures) and reducing the false sharing of cachelines with things that get dirty in .data (while .rodata is nicely read only and thus cache clean) Signed-off-by: NArjan van de Ven <arjan@infradead.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 25 3月, 2006 1 次提交
-
-
由 Michael Owen 提交于
Quick and simple typo fix. neTXstep -> neXTstep Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 24 3月, 2006 2 次提交
-
-
由 Paul Jackson 提交于
Rewrap the overly long source code lines resulting from the previous patch's addition of the slab cache flag SLAB_MEM_SPREAD. This patch contains only formatting changes, and no function change. Signed-off-by: NPaul Jackson <pj@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Paul Jackson 提交于
Mark file system inode and similar slab caches subject to SLAB_MEM_SPREAD memory spreading. If a slab cache is marked SLAB_MEM_SPREAD, then anytime that a task that's in a cpuset with the 'memory_spread_slab' option enabled goes to allocate from such a slab cache, the allocations are spread evenly over all the memory nodes (task->mems_allowed) allowed to that task, instead of favoring allocation on the node local to the current cpu. The following inode and similar caches are marked SLAB_MEM_SPREAD: file cache ==== ===== fs/adfs/super.c adfs_inode_cache fs/affs/super.c affs_inode_cache fs/befs/linuxvfs.c befs_inode_cache fs/bfs/inode.c bfs_inode_cache fs/block_dev.c bdev_cache fs/cifs/cifsfs.c cifs_inode_cache fs/coda/inode.c coda_inode_cache fs/dquot.c dquot fs/efs/super.c efs_inode_cache fs/ext2/super.c ext2_inode_cache fs/ext2/xattr.c (fs/mbcache.c) ext2_xattr fs/ext3/super.c ext3_inode_cache fs/ext3/xattr.c (fs/mbcache.c) ext3_xattr fs/fat/cache.c fat_cache fs/fat/inode.c fat_inode_cache fs/freevxfs/vxfs_super.c vxfs_inode fs/hpfs/super.c hpfs_inode_cache fs/isofs/inode.c isofs_inode_cache fs/jffs/inode-v23.c jffs_fm fs/jffs2/super.c jffs2_i fs/jfs/super.c jfs_ip fs/minix/inode.c minix_inode_cache fs/ncpfs/inode.c ncp_inode_cache fs/nfs/direct.c nfs_direct_cache fs/nfs/inode.c nfs_inode_cache fs/ntfs/super.c ntfs_big_inode_cache_name fs/ntfs/super.c ntfs_inode_cache fs/ocfs2/dlm/dlmfs.c dlmfs_inode_cache fs/ocfs2/super.c ocfs2_inode_cache fs/proc/inode.c proc_inode_cache fs/qnx4/inode.c qnx4_inode_cache fs/reiserfs/super.c reiser_inode_cache fs/romfs/inode.c romfs_inode_cache fs/smbfs/inode.c smb_inode_cache fs/sysv/inode.c sysv_inode_cache fs/udf/super.c udf_inode_cache fs/ufs/super.c ufs_inode_cache net/socket.c sock_inode_cache net/sunrpc/rpc_pipe.c rpc_inode_cache The choice of which slab caches to so mark was quite simple. I marked those already marked SLAB_RECLAIM_ACCOUNT, except for fs/xfs, dentry_cache, inode_cache, and buffer_head, which were marked in a previous patch. Even though SLAB_RECLAIM_ACCOUNT is for a different purpose, it marks the same potentially large file system i/o related slab caches as we need for memory spreading. Given that the rule now becomes "wherever you would have used a SLAB_RECLAIM_ACCOUNT slab cache flag before (usually the inode cache), use the SLAB_MEM_SPREAD flag too", this should be easy enough to maintain. Future file system writers will just copy one of the existing file system slab cache setups and tend to get it right without thinking. Signed-off-by: NPaul Jackson <pj@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 23 3月, 2006 2 次提交
-
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 04 2月, 2006 2 次提交
-
-
由 Evgeniy Dushistov 提交于
This fixes the code like this: bh = sb_find_get_block (sb, tmp + j); if ((bh && DATA_BUFFER_USED(bh)) || tmp != fs32_to_cpu(sb, *p)) { retry = 1; brelse (bh); goto next1; } bforget (bh); sb_find_get_block() ordinarily returns a buffer_head with b_count>=2, and this code assume that in case if "b_count>1" buffer is used, so this caused infinite loop. (akpm: that is-the-buffer-busy code is incomprehensible. Good riddance. Use of block_truncate_page() seems sane). Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Evgeniy Dushistov 提交于
"rm" command, on file system with "ufs1" type cause system hang up. This is, in fact, not so bad as it seems to be, because of after that in "kernel control path" there are 3-4 places which may cause "oops". So the first patch fix oopses, and the second patch fix "kernel hang up". "oops" appears because of reading of group's summary info partly wrong, and access to not first group's summary info cause "oops". Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 15 1月, 2006 1 次提交
-
-
由 Evgeniy 提交于
Here is update of ufs cleanup patch, brought on by the recently fixed ubh_get_usb_second() bug that made some ugly code rather painfully obvious. It also includes - fix compilation warnings which appears if debug mode turn on - remove unnecessary duplication of code to support UFS2 I tested it on ufs1 and ufs2 file-systems. Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 14 1月, 2006 1 次提交
-
-
由 Evgeniy 提交于
There's a lack of parenthesis in fs/ufs/utils.h, so instead of the 512th byte of buffer, the usb2 pointer will point to the nth structure of type ufs_super_block_second. This can cause a mount-time oops if you're unlucky (especially with DEBUG_PAGEALLOC, which is how Alexey Dobriyan saw this problem) Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru> Acked-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 12 1月, 2006 1 次提交
-
-
由 Randy Dunlap 提交于
fs: Use <linux/capability.h> where capable() is used. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Acked-by: NTim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 10 1月, 2006 1 次提交
-
-
由 Jes Sorensen 提交于
This patch converts the inode semaphore to a mutex. I have tested it on XFS and compiled as much as one can consider on an ia64. Anyway your luck with it might be different. Modified-by: NIngo Molnar <mingo@elte.hu> (finished the conversion) Signed-off-by: NJes Sorensen <jes@sgi.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 09 1月, 2006 1 次提交
-
-
由 Evgeniy Polyakov 提交于
Signed-off-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-