switchdev_port_bridge_getlink() queries SWITCHDEV_ATTR_PORT_BRIDGE_FLAGS
attributes, but a driver doesn't need to implement this in order to get
bridge link information.

So error out only on errors different than -EOPNOTSUPP.

(This is a follow-up patch for 7d4f8d87.)

Fixes: 8793d0a6 ("switchdev: add new switchdev_port_bridge_getlink")
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Acked-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This particular BUG_ON condition was checking for attr set err in the
COMMIT phase, which isn't expected (it's a driver bug if PREPARE phase is
OK but COMMIT fails).  But BUG_ON() is too strong for this case, so change
to WARN().  BUG_ON() would be warranted if the system was corrupted beyond
repair, but this is not the case here.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

One more missing piece of the puzzle.  Add vlan dump support to switchdev
port's bridge_getlink.  iproute2 "bridge vlan show" cmd already knows how
to show the vlans installed on the bridge and the device , but (until now)
no one implemented the port vlan part of the netlink PF_BRIDGE:RTM_GETLINK
msg.  Before this patch, "bridge vlan show":

	$ bridge -c vlan show
	port    vlan ids
	sw1p1    30-34			<< bridge side vlans
		 57

	sw1p1				<< device side vlans (missing)

	sw1p2    57

	sw1p2

	sw1p3

	sw1p4

	br0     None

(When the port is bridged, the output repeats the vlan list for the vlans
on the bridge side of the port and the vlans on the device side of the
port.  The listing above show no vlans for the device side even though they
are installed).

After this patch:

	$ bridge -c vlan show
	port    vlan ids
	sw1p1    30-34			<< bridge side vlan
		 57

	sw1p1    30-34			<< device side vlans
		 57
		 3840 PVID

	sw1p2    57

	sw1p2    57
		 3840 PVID

	sw1p3    3842 PVID

	sw1p4    3843 PVID

	br0     None

I re-used ndo_dflt_bridge_getlink to add vlan fill call-back func.
switchdev support adds an obj dump for VLAN objects, using the same
call-back scheme as FDB dump.  Support included for both compressed and
un-compressed vlan dumps.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use vid_begin/end to be consistent with BRIDGE_VLAN_INFO_RANGE_BEGIN/END.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove handling of tx_ring in prb_setup_retire_blk_timer
for TPACKET_V3 because init_prb_bdqc is called only for zero tx_ring
and thus prb_setup_retire_blk_timer for zero tx_ring only.

And also in functon init_prb_bdqc there is no usage of tx_ring.
Thus removing tx_ring from init_prb_bdqc.
Signed-off-by: NManinder Singh <maninder1.s@samsung.com>
Suggested-by: NFrans Klaver <fransklaver@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add code to nf_unregister_hook to flush the nf_queue when a hook is
unregistered.  This guarantees that the pointer that the nf_queue code
retains into the nf_hook list will remain valid while a packet is
queued.

I tested what would happen if we do not flush queued packets and was
trivially able to obtain the oops below.  All that was required was
to stop the nf_queue listening process, to delete all of the nf_tables,
and to awaken the nf_queue listening process.

> BUG: unable to handle kernel paging request at 0000000100000001
> IP: [<0000000100000001>] 0x100000001
> PGD b9c35067 PUD 0
> Oops: 0010 [#1] SMP
> Modules linked in:
> CPU: 0 PID: 519 Comm: lt-nfqnl_test Not tainted
> task: ffff8800b9c8c050 ti: ffff8800ba9d8000 task.ti: ffff8800ba9d8000
> RIP: 0010:[<0000000100000001>]  [<0000000100000001>] 0x100000001
> RSP: 0018:ffff8800ba9dba40  EFLAGS: 00010a16
> RAX: ffff8800bab48a00 RBX: ffff8800ba9dba90 RCX: ffff8800ba9dba90
> RDX: ffff8800b9c10128 RSI: ffff8800ba940900 RDI: ffff8800bab48a00
> RBP: ffff8800b9c10128 R08: ffffffff82976660 R09: ffff8800ba9dbb28
> R10: dead000000100100 R11: dead000000200200 R12: ffff8800ba940900
> R13: ffffffff8313fd50 R14: ffff8800b9c95200 R15: 0000000000000000
> FS:  00007fb91fc34700(0000) GS:ffff8800bfa00000(0000) knlGS:0000000000000000
> CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 0000000100000001 CR3: 00000000babfb000 CR4: 00000000000007f0
> Stack:
>  ffffffff8206ab0f ffffffff82982240 ffff8800bab48a00 ffff8800b9c100a8
>  ffff8800b9c10100 0000000000000001 ffff8800ba940900 ffff8800b9c10128
>  ffffffff8206bd65 ffff8800bfb0d5e0 ffff8800bab48a00 0000000000014dc0
> Call Trace:
>  [<ffffffff8206ab0f>] ? nf_iterate+0x4f/0xa0
>  [<ffffffff8206bd65>] ? nf_reinject+0x125/0x190
>  [<ffffffff8206dee5>] ? nfqnl_recv_verdict+0x255/0x360
>  [<ffffffff81386290>] ? nla_parse+0x80/0xf0
>  [<ffffffff8206c42c>] ? nfnetlink_rcv_msg+0x13c/0x240
>  [<ffffffff811b2fec>] ? __memcg_kmem_get_cache+0x4c/0x150
>  [<ffffffff8206c2f0>] ? nfnl_lock+0x20/0x20
>  [<ffffffff82068159>] ? netlink_rcv_skb+0xa9/0xc0
>  [<ffffffff820677bf>] ? netlink_unicast+0x12f/0x1c0
>  [<ffffffff82067ade>] ? netlink_sendmsg+0x28e/0x650
>  [<ffffffff81fdd814>] ? sock_sendmsg+0x44/0x50
>  [<ffffffff81fde07b>] ? ___sys_sendmsg+0x2ab/0x2c0
>  [<ffffffff810e8f73>] ? __wake_up+0x43/0x70
>  [<ffffffff8141a134>] ? tty_write+0x1c4/0x2a0
>  [<ffffffff81fde9f4>] ? __sys_sendmsg+0x44/0x80
>  [<ffffffff823ff8d7>] ? system_call_fastpath+0x12/0x6a
> Code:  Bad RIP value.
> RIP  [<0000000100000001>] 0x100000001
>  RSP <ffff8800ba9dba40>
> CR2: 0000000100000001
> ---[ end trace 08eb65d42362793f ]---

Cc: stable@vger.kernel.org
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currenlty nf_tables chains added in one network namespace are being
run in all network namespace.  The issues are myriad with the simplest
being an unprivileged user can cause any network packets to be dropped.

Address this by simply not running nf_tables chains in the wrong
network namespace.

Cc: stable@vger.kernel.org
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When STP is running in user-space and querier is configured, the
querier timer is not started when a port goes to a non-blocking state.
This patch unifies the user- and kernel-space stp multicast port enable
path and enables it in all states different from blocking. Note that when a
port goes in BR_STATE_DISABLED it's not enabled because that is handled
in the beginning of the port list loop.
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

inet_diag_dump_reqs() is called from inet_diag_dump_icsk() with BH
disabled. So no need to disable BH in inet_diag_dump_reqs().
Signed-off-by: NHiroaki Shimoda <shimoda.hiroaki@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove the filter_dev check when dumping fdb entries, otherwise dump
returns empty list.  filter_dev is always passed as NULL when dumping fdbs
on SELF.  We want the fdbs installed on the device to be listed in the
dump.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Fixes: 45d4122c ("switchdev: add support for fdb add/del/dump via switchdev_port_obj ops")
Acked-by: NSridhar Samudrala <sridhar.samudrala@intel.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds NLM_F_APPEND flag to struct nlmsg_hdr->nlmsg_flags
in newroute notifications if the route add was an append.
(This is similar to how NLM_F_REPLACE is already part of new
route replace notifications today)

This helps userspace determine if the route add operation was
an append.
Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds getsockopt(SOL_NETLINK, NETLINK_LIST_MEMBERSHIPS) to
retrieve all groups a socket is a member of. Currently, we have to use
getsockname() and look at the nl.nl_groups bitmask. However, this mask is
limited to 32 groups. Hence, similar to NETLINK_ADD_MEMBERSHIP and
NETLINK_DROP_MEMBERSHIP, this adds a separate sockopt to manager higher
groups IDs than 32.

This new NETLINK_LIST_MEMBERSHIPS option takes a pointer to __u32 and the
size of the array. The array is filled with the full membership-set of the
socket, and the required array size is returned in optlen. Hence,
user-space can retry with a properly sized array in case it was too small.
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When an inet_sock is destroyed, its source port (sk_num) is set to
zero as part of the unhash procedure.  In order to supply a source
port as part of the NETLINK_SOCK_DIAG socket destruction broadcasts,
the source port number must be read from inet_sport instead.

Tested: ss -E
Signed-off-by: NCraig Gallek <kraig@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The control !hlist_unhashed() in qfq_destroy_agg() is unnecessary
because already performed in hlist_del_init(), so remove it.
Signed-off-by: NAndrea Parri <parri.andrea@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch also renames sg to sglist and aligns function parameters.
See Documentation/DMA-API.txt - Part Id for scatterlist details
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Destruction of the po->rollover must be delayed until there are no
more packets in flight that can access it. The field is destroyed in
packet_release, before synchronize_net. Delay using rcu.

Fixes: 0648ab70 ("packet: rollover prepare: per-socket state")
Suggested-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While testing my netfilter changes I noticed several files where
recompiling unncessarily because they unncessarily included
netfilter.h.
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This pulls the full hook netfilter definitions from all those that include
net_namespace.h.

Instead let's just include the bare minimum required in the new
linux/netfilter_defs.h file, and use it from the netfilter netns header files.

I also needed to include in.h and in6.h from linux/netfilter.h otherwise we hit
this compilation error:

In file included from include/linux/netfilter_defs.h:4:0,
                 from include/net/netns/netfilter.h:4,
                 from include/net/net_namespace.h:22,
                 from include/linux/netdevice.h:43,
                 from net/netfilter/nfnetlink_queue_core.c:23:
include/uapi/linux/netfilter.h:76:17: error: field ‘in’ has incomplete type struct in_addr in;

And also explicit include linux/netfilter.h in several spots.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>

We don't need to pull the full definitions in that file, a simple forward
declaration is enough.

Moreover, include linux/procfs.h from nf_synproxy_core, otherwise this hits a
compilation error due to missing declarations, ie.

net/netfilter/nf_synproxy_core.c: In function ‘synproxy_proc_init’:
net/netfilter/nf_synproxy_core.c:326:2: error: implicit declaration of function ‘proc_create’ [-Werror=implicit-function-declaration]
  if (!proc_create("synproxy", S_IRUGO, net->proc_net_stat,
  ^
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>

em->net is always set and always available, use it in preference
to dev_net(skb->dev).
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This appears to have been a dead macro in both nfnetlink_log.c and
nfnetlink_queue_core.c since these pieces of code were added in 2005.
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Resolve compilation breakage when CONFIG_IPV6 is not set by moving the IPv6
code into a separated br_netfilter_ipv6.c file.

Fixes: efb6de9b ("netfilter: bridge: forward IPv6 fragmented packets")
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Rework the logic of checking for a valid adv_instance for non-zero
cp->instance values. Without this change we may get (false positive)
warnings as follows:

>> net/bluetooth/mgmt.c:7294:29: warning: 'adv_instance' may be used
uninitialized in this function [-Wuninitialized]
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Use zallog for adv_instance allocation instead of kmalloc + memset.
This also fixes the following coccinelle warning:

>> net/bluetooth/hci_core.c:2693:17-24: WARNING: kzalloc should be
used for adv_instance, instead of kmalloc/memset
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch increments the management interface revision due to
introduction of new multi-advertising feature and various bug fixes.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

Now that the obsolete adv_instance is no longer being referenced
anywhere in the code it can be removed without breaking the build.
Signed-off-by: NFlorian Grandel <fgrandel@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

During service discovery, advertising will be disabled. This patch
ensures that it is correctly being re-enabled, both for configuration
made via set advertising and add advertising, once the scanning
times out.
Signed-off-by: NFlorian Grandel <fgrandel@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch ensures that instance advertising is correctly canceled
before starting a le scan.
Signed-off-by: NFlorian Grandel <fgrandel@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Advertising instances programmed while powered off should be advertised
once the device is powered. This patch ensures that all combinations
of setting and/or adding advertising configuration while powered off
will be correctly activated on power on.
Signed-off-by: NFlorian Grandel <fgrandel@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The remove_advertising() and remove_advertising_complete() functions
had instance identifiers hard coded. Notably, when passing in 0x00 as
an instance identifier to signal that all instances should be removed
then the mgmt API would return a hard coded 0x01 rather than returning
the expected value 0x00. This bug is being fixed by always referencing
the instance identifier from the management API call instead.

remove_advertising() is refactored to use the new dynamic advertising
instance list. The logic is being changed to make multi-instance
advertising actually work, notably the schedule_adv_instance() method is
being referenced to make sure that other instances will continue to
advertise even if one instance is being removed.

The code is made more readable by factoring advertising instance
management and initialization into the low-level
hci_remove_adv_instance() and hci_adv_instances_clear() functions.

The method now references the clear_adv_instance() helper method to
remove duplicate logic and code.
Signed-off-by: NFlorian Grandel <fgrandel@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The add_advertising() and add_advertising_complete() functions reference
the now obsolete hdev->adv_instance struct. Both methods are being
refactored to access the dynamic advertising instance list instead.

This patch also introduces all logic necessary to actually deal with
multiple instance advertising. Notably the mgmt_adv_inst_expired() and
schedule_adv_inst() method are being referenced to schedule instances in
a round robin fashion.

This patch also introduces a "pending" flag into the adv_info struct.
This is necessary to identify and remove recently added advertising
instances when the HCI commands return with an error status code.
Otherwise new advertising instances could be leaked without properly
informing userspace about their existence.
Signed-off-by: NFlorian Grandel <fgrandel@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The clear_adv_instance() function could not clean up multiple
advertising instances previously. It is being changed to provide both, a
means to clean up a single instance and cleaning up all instances at
once.

An additional instance parameter is being introduced to achieve this.
Passing in 0x00 to this parameter signifies that all instances should be
cleaned up. This semantics has been chosen similarly to the semantics of
the instance parameter in the remove_advertising() function.

When removing a single instance the method also ensures that another
instance will be scheduled if available. When the currently advertising
method is being removed, it will be canceled immediately.
Signed-off-by: NFlorian Grandel <fgrandel@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The set_advertising() and set_advertising_complete() methods rely on
the now obsolete hci_dev->adv_instance structure. We replace this
reference by an equivalent access to the newly introduced dynamic
advertising instance list.

This patch introduces a helper function that schedules an advertising
instance correctly calculating advertising timing based on the timeout
and duration settings of the instance. Scheduling is factored into
its own function for readability and code sharing.
Signed-off-by: NFlorian Grandel <fgrandel@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The create_instance_adv_data() function could not deal with
multiple advertising instances previously. This is being fixed by
retrieving advertising instances from the newly introduced dynamic
advertising instance list.
Signed-off-by: NFlorian Grandel <fgrandel@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The create_instance_scan_rsp_data() function could not deal with
multiple advertising instances previously. This is being fixed by adding
an additional instance parameter.
Signed-off-by: NFlorian Grandel <fgrandel@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Previously enable_advertising() would rely on
get_adv_instance_scan_rsp_len() which checked for a hard coded instance
identifier. This is being changed to check for the current advertising
instance's scan response length instead. The function is renamed
accordingly.
Signed-off-by: NFlorian Grandel <fgrandel@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Switch if and else conditions to replace a negative statement by a
positive one which makes the condition more readable.
Signed-off-by: NFlorian Grandel <fgrandel@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The get_adv_instance_flags() would not work with instance identifiers
other than 0x01. This is being fixed so that arbitrary instance
identifiers can be dealt with while still correctly dealing with the
special case of the 0x00 identifier.
Signed-off-by: NFlorian Grandel <fgrandel@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Replaces the hard coded instance identifier in
get_current_adv_instance() with the actual current instance identifier
so that this method is prepared to work with more than one advertising
instance.
Signed-off-by: NFlorian Grandel <fgrandel@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The read_adv_features() method had a single instance identifier hard
coded. Refer to the advertising instance list instead to return a
dynamically generated list of instance identifiers.
Signed-off-by: NFlorian Grandel <fgrandel@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>