- 28 9月, 2018 1 次提交
-
-
由 Quinn Tran 提交于
This patch fixes issue where driver clears NPort ID map instead of marking handle in use. Once driver clears NPort ID from the database, it can reuse the same NPort ID resulting in a PLOGI failure. [mkp: fixed Himanshu's SoB] Fixes: a084fd68 ("scsi: qla2xxx: Fix re-login for Nport Handle in use") Cc: <stable@vger.kernel.org> Signed-of-by: NQuinn Tran <quinn.tran@cavium.com> Reviewed-by: NEwan D. Milne <emilne@redhat.com> Signed-off-by: NHimanshu Madhani <hmadhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 12 9月, 2018 11 次提交
-
-
由 Quinn Tran 提交于
When qla2xxx and Target Core gets out of sync during command cleanup, qla2xxx will not free command until it is out of firmware's hand and Target Core has called the release on the command. This patch adds synchronization using cmd_lock and release flag. If the release flag is set, then qla2xxx will free up the command using qlt_free_cmd() otherwise transport_generic_free_cmd() will be responsible for relase of the command. Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Quinn Tran 提交于
On PLOGI complete + RSCN received, driver tries to handle RSCN but failed to reset the session back to the beginning to restart the login process. Instead the session was left in the Plogi complete without moving forward. This patch will push the session state back to the delete state and restart the connection. Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Quinn Tran 提交于
Add ability to allow each physical port to control operating mode. Current code forces all ports to behave in one mode (i.e. initiator, target or dual). This patch allows user to select the operating mode for each port. - Driver must be loaded in dual mode to allow resource allocation modprobe qla2xxx qlini_mode=dual - In addition user can make adjustment to exchange resources using following command echo 1024 > /sys/class/scsi_host/host<x>/ql2xiniexchg echo 1024 > /sys/class/scsi_host/host<x>/ql2xexchoffld - trigger mode change and new setting of ql2xexchoffld|ql2xiniexchg echo [<value>] > /sys/class/scsi_host/host<x>/qlini_mode where, value can be one of following - enabled - disabled - dual - exclusive Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Quinn Tran 提交于
- Reduce sess_lock holding to prevent CPU Lock up. sess_lock was held across fc_port registration and deletion. These calls can be blocked by upper layer. Sess_lock is also being accessed by interrupt thread. - Reduce number of loops in processing work_list to prevent kernel complaint of CPU lockup or holding sess_lock. Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Quinn Tran 提交于
Add sysfs support to control zio6 interrupt threshold. Using this sysfs hook user can set when to generate interrupts. This value will be used to tell firmware to generate interrupt at a certain interval. If the number of exchanges/commands fall below defined setting, then the interrupt will be generated immediately by the firmware. By default ZIO6 will coalesce interrupts to a specified interval regardless of low traffic or high traffic. [mkp: fixed several typos] Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Quinn Tran 提交于
Following changes are added by this patch - Prevent ABTS Response from getting in front of Termination of exchange. Firmware requires driver to cleanup exchanges before ABTS response can be sent. This reduces ABTS response error which triggers extra command re-termination and re-sending of ABTS response. - Add bits in driver and tracks CTIO/ATIO attribute bits for proper command Termination. A copy of the ATTR bits will be kept in the ABTS task management command as a back up copy, if an ABTS response encounters an error. Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Quinn Tran 提交于
ABTS error completion can trigger an exchange cleanup from the driver and another ABTS response will be generated. This retry of ABTS response can cause loop between driver trying to send ABTS and firmware returning error. This patch fixes this issue by adding logic to check for unresolved exchanges and clean up before ABTS is retried. This patch also addes the fix to use the same qpair as the ABTS completion for the terminatation of exchange as well as retry of ABTS response. Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Quinn Tran 提交于
When driver detect CTIO_INVALID_RX_ID status for CTIO, print message with correct information to help with debugging. Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Quinn Tran 提交于
For driver MBX submission, use mbox_busy to serialize request. For Userspace MBX submission, use optrom mutex to serialize request. Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Quinn Tran 提交于
When driver receive PLOGI/PRLI from FW, the WWPN value will be provided. If it is not, then driver will terminate it. The WWPN allows driver to locate the session or create a new session. Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Quinn Tran 提交于
Currently, the rport registration is being called from a single work element that is used to process QLA internal "work_list". This work_list is meant for quick and simple task (ie no sleep). The Rport registration process sometime can be delayed by upper layer. This causes back pressure with the internal queue where other jobs are unable to move forward. This patch will schedule the registration process with a new work element (fc_port.reg_work). While the RPort is being registered, the current state of the fcport will not move forward until the registration is done. If the state of the fabric has changed, a new field/next_disc_state will record the next action on whether to 'DELETE' or 'Reverify the session/ADISC'. Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 03 8月, 2018 3 次提交
-
-
由 Quinn Tran 提交于
During normal IO, FW can return IO with 'port unavailble' status. Driver would send a LOGO to remote port for session resync. On an off chance, a PLOGI could arrive before sending the LOGO. This patch will skip sendiing LOGO if a PLOGI just came in. Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Quinn Tran 提交于
Login retry count was not properly decrementing which lead to endless retry. Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Quinn Tran 提交于
In case of N2N connect, sg_reset for bus/device/host was causing driver and firmware state to go out of sync. This patch fixes this link instablity when reconnect is attempted after link flap. Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 20 6月, 2018 2 次提交
-
-
由 Matthew Wilcox 提交于
The sbitmap and the percpu_ida perform essentially the same task, allocating tags for commands. The sbitmap outperforms the percpu_ida as documented here: https://lkml.org/lkml/2014/4/22/553 The sbitmap interface is a little harder to use, but being able to remove the percpu_ida code and getting better performance justifies the additional complexity. Signed-off-by: NMatthew Wilcox <willy@infradead.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> # f_tcm Reviewed-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Matthew Wilcox 提交于
Introduce target_free_tag() and convert all drivers to use it. Signed-off-by: NMatthew Wilcox <willy@infradead.org> Reviewed-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 19 6月, 2018 1 次提交
-
-
由 Mikhail Malygin 提交于
The patch reverts changes done in qlt_schedule_sess_for_deletion() to avoid spinlock recursion sess->vha->work_lock should be used instead of ha->tgt.sess_lock, that can be locked in callers: qlt_reset() or qlt_handle_login() [mkp: roll in build warning reported by sfr] Fixes: 1c6cacf4 ("scsi: qla2xxx: Fixup locking for session deletion") Cc: <stable@vger.kernel.org> #v4.17 Signed-off-by: NMikhail Malygin <m.malygin@yadro.com> Reported-by: NMikhail Malygin <m.malygin@yadro.com> Tested-by: NMikhail Malygin <m.malygin@yadro.com> Acked-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 13 6月, 2018 1 次提交
-
-
由 Kees Cook 提交于
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: NKees Cook <keescook@chromium.org>
-
- 08 5月, 2018 5 次提交
-
-
由 Quinn Tran 提交于
For target mode, task management command is queued to specific cpu base on where the SCSI command is residing. This prevent race condition of task management command getting ahead of regular scsi command. Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Quinn Tran 提交于
- Uses predefine inline function to access add_cdb_len field in ATIO. - Return SS_RESIDUAL_UNDER status when sending BUSY Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Quinn Tran 提交于
When a connection is established, the target core session may not be created immediately. Current code will drop/terminate the command based on the session state. This patch will return BUSY status for any commands arriving on wire before the session is created. Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Quinn Tran 提交于
Move GPSC & GFPNID commands out of session management to reduce time lag in reporting the session state to remote port. These commands are not essential when it comes to maintaining the rport state. Delay sending these commands after rport state is set to Online. Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Quinn Tran 提交于
This patch fixes rport state and session state getting out of sync. Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 10 4月, 2018 1 次提交
-
-
由 Ben Hutchings 提交于
qla2x00_init_timer() calls add_timer() on the iocb timeout timer, which means the timeout function pointer and any data that the function depends on must be initialised beforehand. Move this initialisation before each call to qla2x00_init_timer(). In some cases qla2x00_init_timer() initialises a completion structure needed by the timeout function, so move the call to add_timer() after that. Signed-off-by: NBen Hutchings <ben.hutchings@codethink.co.uk> Acked-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 22 3月, 2018 2 次提交
-
-
由 Darren Trapp 提交于
Add support for error recovery within devloss timeout, now that FC-NVMe transport support devloss timeout. Signed-off-by: NDarren Trapp <darren.trapp@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Colin Ian King 提交于
Trivial fix to spelling mistake in debug message text Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 02 3月, 2018 1 次提交
-
-
由 Hannes Reinecke 提交于
Commit d8630bb9 ('Serialize session deletion by using work_lock') tries to fixup a deadlock when deleting sessions, but fails to take into account the locking rules. This patch resolves the situation by introducing a separate lock for processing the GNLIST response, and ensures that sess_lock is released before calling qlt_schedule_sess_delete(). Cc: Himanshu Madhani <himanshu.madhani@cavium.com> Cc: Quinn Tran <quinn.tran@cavium.com> Fixes: d8630bb9 ("scsi: qla2xxx: Serialize session deletion by using work_lock") Signed-off-by: NHannes Reinecke <hare@suse.com> Acked-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 23 2月, 2018 1 次提交
-
-
由 Souptick Joarder 提交于
Use dma_pool_zalloc() instead of dma_pool_alloc + memset Signed-off-by: NSouptick Joarder <jrdr.linux@gmail.com> Acked-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 13 2月, 2018 1 次提交
-
-
由 Bart Van Assche 提交于
Bring the kernel-doc headers in sync with the function argument lists. Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@cavium.com> Acked-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 07 2月, 2018 1 次提交
-
-
由 Bart Van Assche 提交于
Ensure that upon return the tgt->ha->tgt.sess_lock spin lock is unlocked no matter which code path is taken through this function. This was detected by sparse. Fixes: 82abdcaf ("scsi: qla2xxx: Allow target mode to accept PRLI in dual mode") Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@cavium.com> Cc: Quinn Tran <quinn.tran@cavium.com> Acked-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 23 1月, 2018 1 次提交
-
-
由 Himanshu Madhani 提交于
Commit 3515832c ("scsi: qla2xxx: Reset the logo flag, after target re-login.")fixed the target re-login after session relogin is complete, but missed out the qlt_free_session_done() path. This patch clears send_els_logo flag in qlt_free_session_done() callback. [mkp: checkpatch] Fixes: 3515832c ("scsi: qla2xxx: Reset the logo flag, after target re-login.") Signed-off-by: NHimanshu Madhani <hmadhani@redhat.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 17 1月, 2018 1 次提交
-
-
During error test case where switch port status is toggled from enable to disable, following stack trace is seen which indicates recursion trying to send terminate exchange. This regression was introduced by commit 82de802a ("scsi: qla2xxx: Preparation for Target MQ.") BUG: stack guard page was hit at ffffb96488383ff8 (stack is ffffb96488384000..ffffb96488387fff) BUG: stack guard page was hit at ffffb964886c3ff8 (stack is ffffb964886c4000..ffffb964886c7fff) kernel stack overflow (double-fault): 0000 [#1] SMP qlt_term_ctio_exchange+0x9c/0xb0 [qla2xxx] qlt_term_ctio_exchange+0x9c/0xb0 [qla2xxx] qlt_term_ctio_exchange+0x9c/0xb0 [qla2xxx] qlt_term_ctio_exchange+0x9c/0xb0 [qla2xxx] qlt_term_ctio_exchange+0x9c/0xb0 [qla2xxx] Fixes: 82de802a ("scsi: qla2xxx: Preparation for Target MQ.") Cc: <stable@vger.kernel.org> #4.10 Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 04 1月, 2018 7 次提交
-
-
由 Quinn Tran 提交于
Add free_pending flag to serialize queueing of free_work element onto the work queue Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Quinn Tran 提交于
for session deletion, replace sess_lock with work_lock. Under certain case sess_lock is not feasiable to acquire. The lock is needed temporarily to make sure a single call to schedule of the work element. Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Quinn Tran 提交于
Immeadiate flag is not used for scheduling session deletion. Remove it to simplfy session deletion code path. Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Quinn Tran 提交于
Add verbose bit for debug messages to reduce excessive log messages Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Quinn Tran 提交于
Current code creates a session when a new port is discovered, and a PLOGI/PRLI is received. There is no need to create session when command has arrived. Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Quinn Tran 提交于
Migrate switch registration commands: RFTID, RFFID, RNNID and RSNN_NN out of mailbox interface to reduce fabric scan bottle neck. Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Quinn Tran 提交于
reduce usage of terminate exchange when command encounter resource bottle neck. Remote initiator view it as command drop. Signed-off-by: NQuinn Tran <quinn.tran@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-