The patch "thp: export maybe_mkwrite" (commit 14fd403f) breaks
systems without MMU.

Error log:

    CC      arch/microblaze/mm/init.o
  In file included from include/linux/mman.h:14,
                   from arch/microblaze/mm/consistent.c:24:
  include/linux/mm.h: In function 'maybe_mkwrite':
  include/linux/mm.h:482: error: implicit declaration of function 'pte_mkwrite'
  include/linux/mm.h:482: error: incompatible types in assignment
Signed-off-by: NMichal Simek <monstr@monstr.eu>
CC: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: NRik van Riel <riel@redhat.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

All architectures are finally converted. Remove the cruft.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Michal Simek <monstr@monstr.eu>
Acked-by: NDavid Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Jeff Dike <jdike@addtoit.com>

Commit ca9b600b ("ACPI / PM: Make suspend_nvs_save() use
acpi_os_map_memory()") attempted to prevent the code in osl.c and nvs.c
from using different ioremap() variants by making the latter use
acpi_os_map_memory() for mapping the NVS pages.  However, that also
requires acpi_os_unmap_memory() to be used for unmapping them, which
causes synchronize_rcu() to be executed many times in a row
unnecessarily and introduces substantial delays during resume on some
systems.

Instead of using acpi_os_map_memory() for mapping the NVS pages in nvs.c
introduce acpi_os_ioremap() calling ioremap_cache() and make the code in
both osl.c and nvs.c use it.
Reported-by: NJeff Chua <jeff.chua.linux@gmail.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now, under THP:

at charge:
  - PageCgroupUsed bit is set to all page_cgroup on a hugepage.
    ....set to 512 pages.
at uncharge
  - PageCgroupUsed bit is unset on the head page.

So, some pages will remain with "Used" bit.

This patch fixes that Used bit is set only to the head page.
Used bits for tail pages will be set at splitting if necessary.

This patch adds this lock order:
   compound_lock() -> page_cgroup_move_lock().

[akpm@linux-foundation.org: fix warning]
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

During early boot, local IRQ is disabled until IRQ subsystem is
properly initialized.  During this time, no one should enable
local IRQ and some operations which usually are not allowed with
IRQ disabled, e.g. operations which might sleep or require
communications with other processors, are allowed.

lockdep tracked this with early_boot_irqs_off/on() callbacks.
As other subsystems need this information too, move it to
init/main.c and make it generally available.  While at it,
toggle the boolean to early_boot_irqs_disabled instead of
enabled so that it can be initialized with %false and %true
indicates the exceptional condition.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NPekka Enberg <penberg@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <20110120110635.GB6036@htj.dyndns.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The option name of Delayed SACK Timer should be SCTP_DELAYED_SACK,
not SCTP_DELAYED_ACK.

Left SCTP_DELAYED_ACK be concomitant with SCTP_DELAYED_SACK,
for making compatibility with existing applications.

Reference:
8.1.19.  Get or Set Delayed SACK Timer (SCTP_DELAYED_SACK)
（http://tools.ietf.org/html/draft-ietf-tsvwg-sctpsocket-25)
Signed-off-by: NShan Wei <shanwei@cn.fujitsu.com>
Acked-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Acked-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Version 20110112.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLin Ming <ming.m.lin@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLin Ming <ming.m.lin@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

The definition of ECRYPTFS_SUPER_MAGIC has been moved to the include
file 'linux/magic.h' to become available to other kernel subsystems.
Signed-off-by: NRoberto Sassu <roberto.sassu@polito.it>
Signed-off-by: NTyler Hicks <tyhicks@linux.vnet.ibm.com>

The fi_extents_start field of struct fiemap_extent_info is a
user pointer but was not marked as __user. This makes sparse
emit following warnings:

  CHECK   fs/ioctl.c
fs/ioctl.c:114:26: warning: incorrect type in argument 1 (different address spaces)
fs/ioctl.c:114:26:    expected void [noderef] <asn:1>*dst
fs/ioctl.c:114:26:    got struct fiemap_extent *[assigned] dest
fs/ioctl.c:202:14: warning: incorrect type in argument 1 (different address spaces)
fs/ioctl.c:202:14:    expected void const volatile [noderef] <asn:1>*<noident>
fs/ioctl.c:202:14:    got struct fiemap_extent *[assigned] fi_extents_start
fs/ioctl.c:212:27: warning: incorrect type in argument 1 (different address spaces)
fs/ioctl.c:212:27:    expected void [noderef] <asn:1>*dst
fs/ioctl.c:212:27:    got char *<noident>

Also add 'ufiemap' variable to eliminate unnecessary casts.
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

In fput_light(), there's an unlikely(fput_needed), which running on
my normal desktop doing firefox, xchat, evolution and part of my distcc farm,
and running the annotate branch profiler shows that the unlikely is not
very unlikely.

 correct incorrect  %        Function             File              Line
 ------- ---------  -        --------             ----              ----
       0       48 100 fput_light                file.h               26
115828710 897415279  88 fput_light              file.h               26
865271179 5286128445  85 fput_light             file.h               26
19568539  8923664  31 fput_light                file.h               26
12353677  3562279  22 fput_light                file.h               26
  267691    67062  20 fput_light                file.h               26
15014853   348172   2 fput_light                file.h               26
  209258      205   0 fput_light                file.h               26
 1364164        0   0 fput_light                file.h               26

Which gives 1032903812 times it was correct and 6203351846 times it was
incorrect, or 85% incorrect.

Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Currently all filesystems except XFS implement fallocate asynchronously,
while XFS forced a commit.  Both of these are suboptimal - in case of O_SYNC
I/O we really want our allocation on disk, especially for the !KEEP_SIZE
case where we actually grow the file with user-visible zeroes.  On the
other hand always commiting the transaction is a bad idea for fast-path
uses of fallocate like for example in recent Samba versions.   Given
that block allocation is a data plane operation anyway change it from
an inode operation to a file operation so that we have the file structure
available that lets us check for O_SYNC.

This also includes moving the code around for a few of the filesystems,
and remove the already unnedded S_ISDIR checks given that we only wire
up fallocate for regular files.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

* ib_wq is added, which is used as the common workqueue for infiniband
  instead of the system workqueue.  All system workqueue usages
  including flush_scheduled_work() callers are converted to use and
  flush ib_wq.

* cancel_delayed_work() + flush_scheduled_work() converted to
  cancel_delayed_work_sync().

* qib_wq is removed and ib_wq is used instead.

This is to prepare for deprecation of flush_scheduled_work().
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Cleanup the formatting of comments, remove some which don't make sense
anymore.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
[fix conflict with 96a608a4]
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

pmdp_get_and_clear/pmdp_clear_flush/pmdp_splitting_flush were trapped as
BUG() and they were defined only to diminish the risk of build issues on
not-x86 archs and to be consistent with the generic pte methods previously
defined in include/asm-generic/pgtable.h.

But they are causing more trouble than they were supposed to solve, so
it's simpler not to define them when THP is off.

This is also correcting the export of pmdp_splitting_flush which is
currently unused (x86 isn't using the generic implementation in
mm/pgtable-generic.c and no other arch needs that [yet]).
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Sam Ravnborg <sam@ravnborg.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After commit 415e12b2 ("PCI/ACPI: Request _OSC control once for each
root bridge (v3)") include/linux/pci-acpi.h is included by
drivers/pci/pcie/aer/aerdrv.c and if CONFIG_ACPI is unset, the bogus and
unnecessary alternative definition of acpi_find_root_bridge_handle()
causes a build error to occur.

Remove the offending piece of garbage.
Reported-and-tested-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Instead of splitting refcount between (per-cpu) mnt_count
and (SMP-only) mnt_longrefs, make all references contribute
to mnt_count again and keep track of how many are longterm
ones.

Accounting rules for longterm count:
	* 1 for each fs_struct.root.mnt
	* 1 for each fs_struct.pwd.mnt
	* 1 for having non-NULL ->mnt_ns
	* decrement to 0 happens only under vfsmount lock exclusive

That allows nice common case for mntput() - since we can't drop the
final reference until after mnt_longterm has reached 0 due to the rules
above, mntput() can grab vfsmount lock shared and check mnt_longterm.
If it turns out to be non-zero (which is the common case), we know
that this is not the final mntput() and can just blindly decrement
percpu mnt_count.  Otherwise we grab vfsmount lock exclusive and
do usual decrement-and-check of percpu mnt_count.

For fs_struct.c we have mnt_make_longterm() and mnt_make_shortterm();
namespace.c uses the latter in places where we don't already hold
vfsmount lock exclusive and opencodes a few remaining spots where
we need to manipulate mnt_longterm.

Note that we mostly revert the code outside of fs/namespace.c back
to what we used to have; in particular, normal code doesn't need
to care about two kinds of references, etc.  And we get to keep
the optimization Nick's variant had bought us...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The physical address is never used by the device tree code when
allocating memory for unflattening.  Change the architecture's alloc
hook to return the virutal address instead.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Unexport do_add_mount() and make ->d_automount() return the vfsmount to be
added rather than calling do_add_mount() itself.  follow_automount() will then
do the addition.

This slightly complicates things as ->d_automount() normally wants to add the
new vfsmount to an expiration list and start an expiration timer.  The problem
with that is that the vfsmount will be deleted if it has a refcount of 1 and
the timer will not repeat if the expiration list is empty.

To this end, we require the vfsmount to be returned from d_automount() with a
refcount of (at least) 2.  One of these refs will be dropped unconditionally.
In addition, follow_automount() must get a 3rd ref around the call to
do_add_mount() lest it eat a ref and return an error, leaving the mount we
have open to being expired as we would otherwise have only 1 ref on it.

d_automount() should also add the the vfsmount to the expiration list (by
calling mnt_set_expiry()) and start the expiration timer before returning, if
this mechanism is to be used.  The vfsmount will be unlinked from the
expiration list by follow_automount() if do_add_mount() fails.

This patch also fixes the call to do_add_mount() for AFS to propagate the mount
flags from the parent vfsmount.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Allow d_manage() to be called from pathwalk when it is in RCU-walk mode as well
as when it is in Ref-walk mode.  This permits __follow_mount_rcu() to call
d_manage() directly.  d_manage() needs a parameter to indicate that it is in
RCU-walk mode as it isn't allowed to sleep if in that mode (but should return
-ECHILD instead).

autofs4_d_manage() can then be set to retain RCU-walk mode if the daemon
accesses it and otherwise request dropping back to ref-walk mode.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Increase the autofs module sub-version so we can tell what kernel
implementation is being used from user space debug logging.
Signed-off-by: NIan Kent <raven@themaw.net>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Make NFS use the new d_automount() dentry operation rather than abusing
follow_link() on directories.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: NIan Kent <raven@themaw.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Add an AT_NO_AUTOMOUNT flag to suppress terminal automounting of automount
point directories.  This can be used by fstatat() users to permit the
gathering of attributes on an automount point and also prevent
mass-automounting of a directory of automount points by ls.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NIan Kent <raven@themaw.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Add a dentry op (d_manage) to permit a filesystem to hold a process and make it
sleep when it tries to transit away from one of that filesystem's directories
during a pathwalk.  The operation is keyed off a new dentry flag
(DCACHE_MANAGE_TRANSIT).

The filesystem is allowed to be selective about which processes it holds and
which it permits to continue on or prohibits from transiting from each flagged
directory.  This will allow autofs to hold up client processes whilst letting
its userspace daemon through to maintain the directory or the stuff behind it
or mounted upon it.

The ->d_manage() dentry operation:

	int (*d_manage)(struct path *path, bool mounting_here);

takes a pointer to the directory about to be transited away from and a flag
indicating whether the transit is undertaken by do_add_mount() or
do_move_mount() skipping through a pile of filesystems mounted on a mountpoint.

It should return 0 if successful and to let the process continue on its way;
-EISDIR to prohibit the caller from skipping to overmounted filesystems or
automounting, and to use this directory; or some other error code to return to
the user.

->d_manage() is called with namespace_sem writelocked if mounting_here is true
and no other locks held, so it may sleep.  However, if mounting_here is true,
it may not initiate or wait for a mount or unmount upon the parameter
directory, even if the act is actually performed by userspace.

Within fs/namei.c, follow_managed() is extended to check with d_manage() first
on each managed directory, before transiting away from it or attempting to
automount upon it.

follow_down() is renamed follow_down_one() and should only be used where the
filesystem deliberately intends to avoid management steps (e.g. autofs).

A new follow_down() is added that incorporates the loop done by all other
callers of follow_down() (do_add/move_mount(), autofs and NFSD; whilst AFS, NFS
and CIFS do use it, their use is removed by converting them to use
d_automount()).  The new follow_down() calls d_manage() as appropriate.  It
also takes an extra parameter to indicate if it is being called from mount code
(with namespace_sem writelocked) which it passes to d_manage().  follow_down()
ignores automount points so that it can be used to mount on them.

__follow_mount_rcu() is made to abort rcu-walk mode if it hits a directory with
DCACHE_MANAGE_TRANSIT set on the basis that we're probably going to have to
sleep.  It would be possible to enter d_manage() in rcu-walk mode too, and have
that determine whether to abort or not itself.  That would allow the autofs
daemon to continue on in rcu-walk mode.

Note that DCACHE_MANAGE_TRANSIT on a directory should be cleared when it isn't
required as every tranist from that directory will cause d_manage() to be
invoked.  It can always be set again when necessary.

==========================
WHAT THIS MEANS FOR AUTOFS
==========================

Autofs currently uses the lookup() inode op and the d_revalidate() dentry op to
trigger the automounting of indirect mounts, and both of these can be called
with i_mutex held.

autofs knows that the i_mutex will be held by the caller in lookup(), and so
can drop it before invoking the daemon - but this isn't so for d_revalidate(),
since the lock is only held on _some_ of the code paths that call it.  This
means that autofs can't risk dropping i_mutex from its d_revalidate() function
before it calls the daemon.

The bug could manifest itself as, for example, a process that's trying to
validate an automount dentry that gets made to wait because that dentry is
expired and needs cleaning up:

	mkdir         S ffffffff8014e05a     0 32580  24956
	Call Trace:
	 [<ffffffff885371fd>] :autofs4:autofs4_wait+0x674/0x897
	 [<ffffffff80127f7d>] avc_has_perm+0x46/0x58
	 [<ffffffff8009fdcf>] autoremove_wake_function+0x0/0x2e
	 [<ffffffff88537be6>] :autofs4:autofs4_expire_wait+0x41/0x6b
	 [<ffffffff88535cfc>] :autofs4:autofs4_revalidate+0x91/0x149
	 [<ffffffff80036d96>] __lookup_hash+0xa0/0x12f
	 [<ffffffff80057a2f>] lookup_create+0x46/0x80
	 [<ffffffff800e6e31>] sys_mkdirat+0x56/0xe4

versus the automount daemon which wants to remove that dentry, but can't
because the normal process is holding the i_mutex lock:

	automount     D ffffffff8014e05a     0 32581      1              32561
	Call Trace:
	 [<ffffffff80063c3f>] __mutex_lock_slowpath+0x60/0x9b
	 [<ffffffff8000ccf1>] do_path_lookup+0x2ca/0x2f1
	 [<ffffffff80063c89>] .text.lock.mutex+0xf/0x14
	 [<ffffffff800e6d55>] do_rmdir+0x77/0xde
	 [<ffffffff8005d229>] tracesys+0x71/0xe0
	 [<ffffffff8005d28d>] tracesys+0xd5/0xe0

which means that the system is deadlocked.

This patch allows autofs to hold up normal processes whilst the daemon goes
ahead and does things to the dentry tree behind the automouter point without
risking a deadlock as almost no locks are held in d_manage() and none in
d_automount().
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Was-Acked-by: NIan Kent <raven@themaw.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Add a dentry op (d_automount) to handle automounting directories rather than
abusing the follow_link() inode operation.  The operation is keyed off a new
dentry flag (DCACHE_NEED_AUTOMOUNT).

This also makes it easier to add an AT_ flag to suppress terminal segment
automount during pathwalk and removes the need for the kludge code in the
pathwalk algorithm to handle directories with follow_link() semantics.

The ->d_automount() dentry operation:

	struct vfsmount *(*d_automount)(struct path *mountpoint);

takes a pointer to the directory to be mounted upon, which is expected to
provide sufficient data to determine what should be mounted.  If successful, it
should return the vfsmount struct it creates (which it should also have added
to the namespace using do_add_mount() or similar).  If there's a collision with
another automount attempt, NULL should be returned.  If the directory specified
by the parameter should be used directly rather than being mounted upon,
-EISDIR should be returned.  In any other case, an error code should be
returned.

The ->d_automount() operation is called with no locks held and may sleep.  At
this point the pathwalk algorithm will be in ref-walk mode.

Within fs/namei.c itself, a new pathwalk subroutine (follow_automount()) is
added to handle mountpoints.  It will return -EREMOTE if the automount flag was
set, but no d_automount() op was supplied, -ELOOP if we've encountered too many
symlinks or mountpoints, -EISDIR if the walk point should be used without
mounting and 0 if successful.  The path will be updated to point to the mounted
filesystem if a successful automount took place.

__follow_mount() is replaced by follow_managed() which is more generic
(especially with the patch that adds ->d_manage()).  This handles transits from
directories during pathwalk, including automounting and skipping over
mountpoints (and holding processes with the next patch).

__follow_mount_rcu() will jump out of RCU-walk mode if it encounters an
automount point with nothing mounted on it.

follow_dotdot*() does not handle automounts as you don't want to trigger them
whilst following "..".

I've also extracted the mount/don't-mount logic from autofs4 and included it
here.  It makes the mount go ahead anyway if someone calls open() or creat(),
tries to traverse the directory, tries to chdir/chroot/etc. into the directory,
or sticks a '/' on the end of the pathname.  If they do a stat(), however,
they'll only trigger the automount if they didn't also say O_NOFOLLOW.

I've also added an inode flag (S_AUTOMOUNT) so that filesystems can mark their
inodes as automount points.  This flag is automatically propagated to the
dentry as DCACHE_NEED_AUTOMOUNT by __d_instantiate().  This saves NFS and could
save AFS a private flag bit apiece, but is not strictly necessary.  It would be
preferable to do the propagation in d_set_d_op(), but that doesn't normally
have access to the inode.

[AV: fixed breakage in case if __follow_mount_rcu() fails and nameidata_drop_rcu()
succeeds in RCU case of do_lookup(); we need to fall through to non-RCU case after
that, rather than just returning with ungrabbed *path]
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Was-Acked-by: NIan Kent <raven@themaw.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

drivers/dma/amba-pl08x.c: In function 'pl08x_start_txd':
drivers/dma/amba-pl08x.c:205: warning: dereferencing 'void *' pointer

We never dereference llis_va aside from assigning it to a struct
pl08x_lli pointer or calculating the address of array element 0.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

desc->tx_submit's return type is dma_cookie_t, not int.  Therefore,
dmaengine_submit() should match this return type as it's just
wrapping this detail.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

This reverts commit dfe63bb0.

This commit was causing nouveau not to work properly, for -rc1 I'd
prefer it worked and we can look if this is useful for 2.6.39.

Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The compilation of drivers/acpi/pci_root.c fails if
CONFIG_PCIEPORTBUS is unset.  Fix the problem.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NHanno Boeck <hanno@hboeck.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Commit e09b457b (block: simplify holder symlink handling) incorrectly
assumed that there is only one link at maximum.  dm may use multiple
links and expects block layer to track reference count for each link,
which is different from and unrelated to the exclusive device holder
identified by @holder when the device is opened.

Remove the single holder assumption and automatic removal of the link
and revive the per-link reference count tracking.  The code
essentially behaves the same as before commit e09b457b sans the
unnecessary kobject reference count dancing.

While at it, note that this facility should not be used by anyone else
than the current ones.  Sysfs symlinks shouldn't be abused like this
and the whole thing doesn't belong in the block layer at all.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NMilan Broz <mbroz@redhat.com>
Cc: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Neil Brown <neilb@suse.de>
Cc: linux-raid@vger.kernel.org
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

After recent changes related to wakeup events pm_wakeup_event()
automatically checks if the given device is configured to signal wakeup,
so pci_wakeup_event() may be a static inline function calling
pm_wakeup_event() directly.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Move the evaluation of acpi_pci_osc_control_set() (to request control of
PCI Express native features) into acpi_pci_root_add() to avoid calling
it many times for the same root complex with the same arguments.
Additionally, check if all of the requisite _OSC support bits are set
before calling acpi_pci_osc_control_set() for a given root complex.

References: https://bugzilla.kernel.org/show_bug.cgi?id=20232Reported-by: NOzan Caglayan <ozan@pardus.org.tr>
Tested-by: NOzan Caglayan <ozan@pardus.org.tr>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

The commit:

 9f987b3141f086de27832514aad9f50a53f754
 tracing: Include module.h in define_trace.h

only solved half the problem. If the trace/events/module.h header is
included at the time of define_trace.h (or in ftrace.h within it),
the module.h TRACE_SYSTEM will override the current TRACE_SYSTEM
macro.

Since define_trace.h is included when CREATE_TRACE_POINTS is set,
and the first thing it does is to #undef CREATE_TRACE_POINTS,
by placing the module.h TRACE_SYSTEM inside a
 #ifdef CREATE_TRACE_POINTS
we can prevent it from overriding the TRACE_SYSTEM that is
being processed, and still process the module.h tracepoints
when the module code defines CREATE_TRACE_POINTS and includes
the trace/events/module.h header.

As with commit 9f987b3141, this is only an issue if module.h
is not included before the trace/events/<event>.h file is
included, which (luckily) has not happened yet.
Reported-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

LIO target is a full featured in-kernel target framework with the
following feature set:

High-performance, non-blocking, multithreaded architecture with SIMD
support.

Advanced SCSI feature set:

    * Persistent Reservations (PRs)
    * Asymmetric Logical Unit Assignment (ALUA)
    * Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
    * Full Error Recovery (ERL=0,1,2)
    * Active/active task migration and session continuation (ERL=2)
    * Thin LUN provisioning (UNMAP and WRITE_SAMExx)

Multiprotocol target plugins

Storage media independence:

    * Virtualization of all storage media; transparent mapping of IO to LUNs
    * No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
    * Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.

Standards compliance:

    * Full compliance with IETF (RFC 3720)
    * Full implementation of SPC-4 PRs and ALUA

Significant code cleanups done by Christoph Hellwig.

[jejb: fix up for new block bdev exclusive interface. Minor fixes from
 Randy Dunlap and Dan Carpenter.]
Signed-off-by: NNicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Commit 5f829e40 (gpiolib: add missing functions
to generic fallback) also introduced two.
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Cc: Greg KH <gregkh@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The flags added by commit db16d5ec
has no user now. We believe we'll use it soon but considering
patch reviewing, the change itself should be folded into incoming
set of "dirty ratio for memcg" patches.

So, it's better to drop this change from current mainline tree.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: NGreg Thelen <gthelen@google.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The MAX17042 is a fuel gauge with an I2C interface for lithium-ion
betteries. Unlike its predecessor MAX17040, MAX17042 uses 16bit
registers. Besides, MAX17042 has much more features than MAX17040; e.g.,
a thermistor, current and current accumulation measurement, battery
internal resistance estimate, average values of measurement, and others.

This patch implements a driver for MAX17042.
In this initial release, we have implemented the most basic features of
a fuel gauge: measure the battery capacity and voltage.
Signed-off-by: NMyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NAnton Vorontsov <cbouatmailru@gmail.com>

__d_rehash is dereferencing an almost-NULL pointer on my ARM926.
CONFIG_SMP=n and CONFIG_DEBUG_SPINLOCK=y.

The faulting instruction is:    strne   r3, [r2, #4]
and as can be seen from the register dump below, r2 is 0x00000001, hence
the faulting 0x00000005 address.

__d_rehash is essentially:

       spin_lock_bucket(b);
       entry->d_flags &= ~DCACHE_UNHASHED;
       hlist_bl_add_head_rcu(&entry->d_hash, &b->head);
       spin_unlock_bucket(b);

which is:

       bit_spin_lock(0, (unsigned long *)&b->head.first);
       entry->d_flags &= ~DCACHE_UNHASHED;
       hlist_bl_add_head_rcu(&entry->d_hash, &b->head);
       __bit_spin_unlock(0, (unsigned long *)&b->head.first);

bit_spin_lock(0, ptr) sets bit 0 of *ptr, in this case b->head.first if
CONFIG_SMP or CONFIG_DEBUG_SPINLOCK is set:

#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
       while (unlikely(test_and_set_bit_lock(bitnum, addr))) {
               while (test_bit(bitnum, addr)) {
                       preempt_enable();
                       cpu_relax();
                       preempt_disable();
               }
       }
#endif

So, b->head.first starts off NULL, and becomes a non-NULL (address 1).
hlist_bl_add_head_rcu() does this:

static inline void hlist_bl_add_head_rcu(struct hlist_bl_node *n,
                                       struct hlist_bl_head *h)
{
       first = hlist_bl_first(h);
       n->next = first;
       if (first)
               first->pprev = &n->next;

It is the store to first->pprev which is faulting.

hlist_bl_first():

static inline struct hlist_bl_node *hlist_bl_first(struct hlist_bl_head *h)
{
       return (struct hlist_bl_node *)
               ((unsigned long)h->first & ~LIST_BL_LOCKMASK);
}

but:
#if defined(CONFIG_SMP)
#define LIST_BL_LOCKMASK        1UL
#else
#define LIST_BL_LOCKMASK        0UL
#endif

So, we have one piece of code which sets bit 0 of addresses, and another
bit of code which doesn't clear it before dereferencing the pointer if
!CONFIG_SMP && CONFIG_DEBUG_SPINLOCK.  With the patch below, I can again
sucessfully boot the kernel on my Versatile PB/926 platform.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch adds support for chip version 2.0 or cut 2.0.
One new interrupt latch register - latch 12 - is introduced.
Signed-off-by: NMattias Wallin <mattias.wallin@stericsson.com>
Acked-by: NLinus Walleij <linus.walleij@stericsson.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>