Include 2019 in copyright years and start using SPDX tag.
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812092935.21048-1-michal.wajdeczko@intel.com

No need to use intel_uc_supports_guc_submission(uc) as we
can directly use intel_guc_is_submission_supported(guc)
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190804195052.31140-2-michal.wajdeczko@intel.com

The shrinker cannot touch objects used by the contexts (logical state
and ring). Currently we mark those as "pin_global" to let the shrinker
skip over them, however, if we remove them from the shrinker lists
entirely, we don't event have to include them in our shrink accounting.

By keeping the unshrinkable objects in our shrinker tracking, we report
a large number of objects available to be shrunk, and leave the shrinker
deeply unsatisfied when we fail to reclaim those. The shrinker will
persist in trying to reclaim the unavailable objects, forcing the system
into a livelock (not even hitting the dread oomkiller).

v2: Extend unshrinkable protection for perma-pinned scratch and guc
allocations (Tvrtko)
v3: Notice that we should be pinned when marking unshrinkable and so the
link cannot be empty; merge duplicate paths.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190802212137.22207-1-chris@chris-wilson.co.uk

Instead of relying on enable_guc modparam to represent actual
GuC submission mode, use dedicated flag and look at modparam
only to check if submission was explicitly disabled by the user.

v2: rebased, simplified condition (Chris)
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190731223321.36436-4-michal.wajdeczko@intel.com

Rename intel_uc_is_using* into intel_uc_supports* to make clear
distinction from actual state (compare intel_uc_fw_is_running)
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190731223321.36436-2-michal.wajdeczko@intel.com

guc->stage_desc_pool is required as part of the init parameters and
there is no reason we have to init them after HuC. This fixes a NULL
ptr dereference due to guc->stage_desc_pool not being set (no fixes
tag since GuC submission can't be enabled yet).
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725174655.24382-1-daniele.ceraolospurio@intel.com

All the GuC objects are perma-pinned, so their offset can't change at
runtime. We can therefore set (and log!) the parameters only once during
boot.
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190724085849.18047-1-chris@chris-wilson.co.uk

Get rid of them to avoid more users being added while the guc code
transitions to use gt more than i915.
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Acked-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713100016.8026-11-chris@chris-wilson.co.ukSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

With our HW interface logic moving from i915 to gt and with GuC and HuC
being part of the gt HW, it makes sense to use the intel_gt structure
instead of i915 as our reference object in GuC/HuC paths.
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713100016.8026-9-chris@chris-wilson.co.ukSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Both microcontrollers are part of the GT HW and are closely related to
GT operations. To keep all the files cleanly together, they've been
placed in their own subdir inside the gt/ folder
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713100016.8026-6-chris@chris-wilson.co.ukSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

The "misc" terminology doesn't clearly explain what we intend to cover
in this phase. The only thing we used ot do in there apart from FW fetch
was initializing the log workqueue, with the latter being required only in
the very rare case where we enable the log relay. As we no longer create
our own workqueue, piggybacking on the system_highpri_wq instead, we can
rename the function to clarify that they only fetch/release the blobs.

v2: only create log wq when needed (Michal), reword commit msg
accordingly
v3: after rebase the wq is gone, reword commit msg accordingly
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713100016.8026-2-chris@chris-wilson.co.ukSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

We only employ a single task for log capture, and created a workqueue
for the purpose of ensuring we had a high priority queue for low
latency. We can simply use the system_highpri_wq and avoid the
complication with creating our own admist the maze of mutexes.
(Currently we create the wq early before we even know we need it in
order to avoid trying to create it on demand while we hold the logging
mutex.)
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713100016.8026-1-chris@chris-wilson.co.uk

Preemption via GuC submission is not being supported with its current
legacy incarnation. The current FW does support a similar pre-emption
flow via H2G, but it is class-based instead of being instance-based,
which doesn't fit well with the i915 tracking. To fix this, the
firmware is being updated to better support our needs with a new flow,
so we can safely remove the old code.

v2 (Daniele): resurrect & rebase, reword commit message, remove
preempt_context as well
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Acked-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NMichał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190710005437.3496-2-daniele.ceraolospurio@intel.com

These functions operate on ggtt so make them take that directly as
parameter.

At the same time move the USES_GUC conditional down to
intel_guc_reserve_ggtt_top for symmetry with
intel_guc_reserved_gtt_size.

v2:
 * Rename and move functions to be static in i915_gem_gtt.c (Michal)

v3:
 * Add comment explaining reason for reservation, add assert and fix
   error message. (Michal)

v4:
 * Fix checkpatch error.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611122350.15060-1-tvrtko.ursulin@linux.intel.com

Reduces pointer chasing and gets more to the point.

v2:
 * Tidy whitespace.
 * Tidy comment. (Michal)
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611110044.7742-1-tvrtko.ursulin@linux.intel.com

Now that we've moved the Gen9 GuC blobs to version 32 we have CTB
support on all gens, so no need to restrict the usage to Gen11+.
Note that MMIO communication is still required for CTB initialization.

v2: fix commit message nits (Michal)
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606224225.14287-1-daniele.ceraolospurio@intel.com

Split the plain old shmem object into its own file to start decluttering
i915_gem.c

v2: Lose the confusing, hysterical raisins, suffix of _gtt.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528092956.14910-4-chris@chris-wilson.co.uk

Starting Gen11 GuC shares interrupt registers with SG unit
instead of PM. But for now we don't care about SG interrupts.

v2: (Chris)
v3: rebased (Michal)
v4: more bspec pages, use macros, update commit msg (Michal Wi)

Bspec: 19820, 19840, 19841, 20176
Signed-off-by: NOscar Mateo <oscar.mateo@intel.com>
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NMichał Winiarski <michal.winiarski@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-13-michal.wajdeczko@intel.com

Controlling and handling of the GuC interrupts is Gen specific.
Create virtual functions to avoid redundant runtime Gen checks.
Gen-specific versions of these functions will follow.

v2: move vfuncs to struct guc (Daniele)
v3: rebased
Signed-off-by: NOscar Mateo <oscar.mateo@intel.com>
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-12-michal.wajdeczko@intel.com

Gen11 adds new set of scratch registers that can be used for MMIO
based Host-to-Guc communication. Due to limited number of these
registers it is expected that host will use them only for command
transport buffers (CTB) communication setup if one is available.

Bspec: 21044
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-10-michal.wajdeczko@intel.com

Gen11 defines new more flexible Host-to-GuC interrupt register.
Now the host can write any 32-bit payload to trigger an interrupt
and GuC can additionally read this payload from the register.
Current GuC firmware ignores the payload so we just write 0.

Bspec: 21043
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-9-michal.wajdeczko@intel.com

New GuC 32.0.3 firmware made many changes around its ABI that
require driver updates:

* FW release version numbering schema now includes patch number
* FW release version encoding in CSS header
* Boot parameters
* Suspend/resume protocol
* Sample-forcewake command
* Additional Data Structures (ADS)

This commit is a squash of patches 3-8 from series [1].
[1] https://patchwork.freedesktop.org/series/58760/Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Jeff Mcgee <jeff.mcgee@intel.com>
Cc: John Spotswood <john.a.spotswood@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # numbering schema
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # ccs heaser
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # boot params
Acked-by: John Spotswood <john.a.spotswood@intel.com> # suspend/resume
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # sample-forcewake
Acked-by: John Spotswood <john.a.spotswood@intel.com> # sample-forcewake
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # ADS
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-4-michal.wajdeczko@intel.com

Currently we pin the GuC or HuC firmware image just before uploading.
Perma-pin during uC initialization instead and use the range reserved at
the top of the address space.

Moving the firmware resulted in needing to:
- use an additional pinning for the rsa signature which will be used
  during HuC auth as addresses above GUC_GGTT_TOP do not map through GTT.

v2: Remove call to set to gtt domain
    Do not restore fw gtt mapping unconditionally
    Separate out pin/unpin functions and drop usage of pin/unpin
    Use uc_fw init/fini functions to bind/unbind fw object

v3: Bind is only needed during xfer (Chris)
    Remove attempts to bind outside of xfer (Chris)
    Mark fw bind/unbind static
Signed-off-by: NFernando Pacheco <fernando.pacheco@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190419230015.18121-4-fernando.pacheco@intel.com

GuC and HuC depend on struct_mutex for device reinitialization. Moving
away from this dependency requires perma-pinning the firmware images in
GGTT.  The upper portion of the GuC address space has a sizeable hole
(several MB) that is inaccessible by GuC. Reserve this range within GGTT
as it can comfortably hold GuC/HuC firmware images.

v2: Reserve node rather than insert (Chris)
    Simpler determination of node start/size (Daniele)
    Move reserve/release out to intel_guc.* files

v3: Reserve starting at GUC_GGTT_TOP only and bail if this
    fails (Chris)
Signed-off-by: NFernando Pacheco <fernando.pacheco@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190419230015.18121-3-fernando.pacheco@intel.com

he uC firmware init function is called during GuC/HuC init early phases.
 Rename to include "_early" and properly reflect which phase we are at.

The uC firmware fini function is cleaning up the state set/created on
firmware fetch. Replace "_fini" with "_cleanup_fetch".

v2: also rename uC fw fini function
Signed-off-by: NFernando Pacheco <fernando.pacheco@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190419230015.18121-2-fernando.pacheco@intel.com

The intel_uncore structure is the owner of register access, so
subclass the function to it.

While at it, use a local uncore var and switch to the new read/write
functions where it makes sense.
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325214940.23632-9-daniele.ceraolospurio@intel.com

The intel_uncore structure is the owner of register access, so
subclass the function to it.

While at it, use a local uncore var and switch to the new read/write
functions where it makes sense.
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325214940.23632-8-daniele.ceraolospurio@intel.com

The intel_uncore structure is the owner of FW, so subclass the
function to it.

While at it, use a local uncore var and switch to the new read/write
functions where it makes sense.
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325214940.23632-7-daniele.ceraolospurio@intel.com

GuC may send notification messages with payload larger than
single u32. Prepare driver to accept longer messages.
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321120004.53012-1-michal.wajdeczko@intel.com

Now that the internal code all works on intel_uncore, flip the
external-facing interface.

v2: fix GVT.
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190319183543.13679-4-daniele.ceraolospurio@intel.com

The aim of this patch is to allow enabling and disabling
of CTB without requiring the mutex lock.

v2: Phasing out ctch_is_enabled function and replacing it with
    ctch->enabled (Daniele)

Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NSujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190220013927.9488-2-sujaritha.sundaresan@intel.com

We wrongly assumed that GuC is only using last scratch register
for G2H messages, but in fact it is also using register [14] to
report sleep state status. Remove that register from our H2G
send registers pool.

v2: No message from host to GuC uses more than 8 registers and
the GuC FW itself uses an 8-element array to store the H2G message,
so we may reduce our send array to just 8 registers (Daniele)
v3: use explicit define (Daniele)
v4: and explicit comment (Daniele)
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181019101725.14024-1-michal.wajdeczko@intel.com

The ENTER/EXIT_S_STATE actions queue the save/restore operation in GuC
FW and then return, so waiting on the H2G is not enough to guarantee
GuC is done.
When all the processing is done, GuC writes 0 to scratch register 14,
so we can poll on that. Note that GuC does not ensure that the value
in the register is different from 0 while the action is in progress
so we need to take care of that ourselves as well.

v2: improve comment, return early on GuC error and improve error
    message (Michal)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016224648.2326-1-daniele.ceraolospurio@intel.com

Removing the pin bias from GuC allows us to not check for GuC every time
we pin a context, which fixes the assertion error on unresolved GuC
platform default in mock contexts selftest.

It also seems that we were using uninitialized WOPCM variables when
setting the GuC pin bias. The pin bias has to be set after the WOPCM,
but before the call to i915_gem_contexts_init where the first contexts
are pinned.

v2:
This also makes it so that there's no need to set GuC variables from
within the WOPCM init function or to move the WOPCM init, while keeping
the correct initialization order. Also for mock tests the pin bias is
left at 0 and we make sure that the pin bias with GuC will not be
smaller than without GuC.

v3:
Avoid unused i915 in intel_guc_ggtt_offset if debug is disabled.

v4:
Squash with WOPCM init reordering.
Moved the i915_ggtt_pin_bias helper to this patch, and made some
functions use it instead of directly dereferencing i915->ggtt.

v5:
Since we now don't use wopcm.guc.base for the pin bias there's no need to
validate it. It also has already been verified in WOPCM init.

v6:
Deleted the now unnecessarily introduced includes from previous versions.
Dropped naming changes from dev_priv to i915 for better patch readability.

v7:
Changed some comments to make more sense in the context they're in.

v8:
Moved and renamed the function which now returns the wopcm.guc.size to
intel_guc.c:intel_guc_reserved_gtt_size to avoid any possible confusion
with the pin_bias in ggtt, which should be used for pinning.
Fixed patch not applying or the most recent upstream.

Fixes: f7dc0157 ("drm/i915/uc: Fetch GuC/HuC firmwares from guc/huc specific init")
Testcase: igt/drv_selftest/mock_contexts #GuC
Signed-off-by: NJakub Bartmiński <jakub.bartminski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180727141148.30874-3-jakub.bartminski@intel.com

It would appear that the calculated GuC pin bias was larger than it should
be, as the GuC address space does NOT contain the "HW contexts RSVD" part
of the WOPCM. Thus, the GuC pin bias is simply the GuC WOPCM size.

v5:
Clarify the diagram to better represent the GuC address space.
Since we now don't use guc.base for the pin bias there's no need to
validate it. It also has already been verified in WOPCM init.

Bspec: 1180
Signed-off-by: NJakub Bartmiński <jakub.bartminski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: NMichał Winiarski <michal.winiarski@intel.com>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180727141148.30874-1-jakub.bartminski@intel.com

Using PAGE_SIZE for virtual offset alignment is superfluous as it is
equal to the minimum gtt alignment and so equivalent to 0. It is also
the wrong value to use as we stopped using physical page constructs for
the virtual GTT, i.e. it would be preferrable to use I915_GTT_PAGE_SIZE
and in these cases merely imply I915_GTT_MIN_ALIGNMENT.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180727091855.1879-1-chris@chris-wilson.co.uk

Prevent
[  397.873143] general protection fault: 0000 [#1] PREEMPT SMP PTI
[  397.873154] CPU: 4 PID: 4799 Comm: drv_module_relo Tainted: G     U            4.18.0-rc6-CI-CI_DRM_4534+ #1
[  397.873162] Hardware name: Micro-Star International Co., Ltd. MS-7B54/Z370M MORTAR (MS-7B54), BIOS 1.10 12/28/2017
[  397.873175] RIP: 0010:__lock_acquire+0xf6/0x1b50
[  397.873179] Code: 85 c0 4c 8b 9d 40 ff ff ff 8b 8d 38 ff ff ff 44 8b 8d 30 ff ff ff 4c 8b 85 28 ff ff ff 44 8b 95 24 ff ff ff 0f 84 54 03 00 00 <f0> ff 80 38 01 00 00 8b 15 45 8c 59 02 45 8b bc 24 70 08 00 00 85
[  397.873240] RSP: 0018:ffffc90000497b40 EFLAGS: 00010002
[  397.873246] RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000001 RCX: 0000000000000000
[  397.873252] RDX: 0000000000000046 RSI: 0000000000000000 RDI: 0000000000000000
[  397.873258] RBP: ffffc90000497c20 R08: ffffffff810a25e9 R09: 0000000000000000
[  397.873264] R10: 0000000000000000 R11: ffff880255c63c28 R12: ffff8801093b2840
[  397.873270] R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000246
[  397.873277] FS:  00007faf88d71980(0000) GS:ffff880266300000(0000) knlGS:0000000000000000
[  397.873284] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  397.873289] CR2: 000055d866c9ca10 CR3: 000000025472e006 CR4: 00000000003606e0
[  397.873295] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  397.873301] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  397.873308] Call Trace:
[  397.873318]  ? lock_acquire+0xa6/0x210
[  397.873323]  lock_acquire+0xa6/0x210
[  397.873331]  ? drain_workqueue+0x19/0x180
[  397.873339]  __mutex_lock+0x89/0x980
[  397.873346]  ? drain_workqueue+0x19/0x180
[  397.873352]  ? _raw_spin_unlock_irqrestore+0x4c/0x60
[  397.873359]  ? trace_hardirqs_on_caller+0xe0/0x1b0
[  397.873365]  ? drain_workqueue+0x19/0x180
[  397.873373]  ? debug_object_active_state+0x127/0x150
[  397.873381]  ? drain_workqueue+0x19/0x180
[  397.873387]  drain_workqueue+0x19/0x180
[  397.873395]  destroy_workqueue+0x12/0x1f0
[  397.873476]  intel_guc_fini_misc+0x36/0x90 [i915]
[  397.873540]  i915_gem_fini+0x91/0x100 [i915]
[  397.873588]  i915_driver_unload+0xd2/0x110 [i915]
[  397.873638]  i915_pci_remove+0x19/0x30 [i915]
[  397.873646]  pci_device_remove+0x36/0xb0
[  397.873653]  device_release_driver_internal+0x185/0x250
[  397.873660]  driver_detach+0x35/0x70
[  397.873668]  bus_remove_driver+0x53/0xd0
[  397.873675]  pci_unregister_driver+0x25/0xa0
[  397.873683]  __se_sys_delete_module+0x162/0x210
[  397.873691]  ? do_syscall_64+0xd/0x190
[  397.873697]  do_syscall_64+0x55/0x190
[  397.873704]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  397.873710] RIP: 0033:0x7faf884231b7
[  397.873714] Code: 73 01 c3 48 8b 0d d1 8c 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 8c 2c 00 f7 d8 64 89 01 48
[  397.873775] RSP: 002b:00007ffda4e98cf8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[  397.873784] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007faf884231b7
[  397.873790] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000055fbb18f1bd8
[  397.873796] RBP: 000055fbb18f1b70 R08: 000055fbb18f1bdc R09: 00007ffda4e98d38
[  397.873802] R10: 00007ffda4e97cf4 R11: 0000000000000206 R12: 000055fbb0d32470
[  397.873808] R13: 00007ffda4e992e0 R14: 0000000000000000 R15: 0000000000000000

v2: It's use-after-free; not a NULL pointer.

Testcase: igt/drv_module_reload/basic-reload-inject
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: NMichał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180726085033.4044-1-chris@chris-wilson.co.uk

A reasonably common operation is to pin the map of the vma alongside the
vma itself for the lifetime of the vma, and so release both pins at the
same time as destroying the vma. It is common enough to pull into the
release function, making that central function more attractive to a
couple of other callsites.

The continual ulterior motive is to sweep over errors on module load
aborting...

Testcase: igt/drv_module_reload/basic-reload-inject
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: NMichał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180721125037.20127-1-chris@chris-wilson.co.uk

We're seeing "RPM wakelock ref not held during HW access" warning
otherwise. Since IRQs are synced for runtime suspend we can just disable
the wakeref asserts.
Reported-by: NMarta Löfstedt <marta.lofstedt@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105710Signed-off-by: NMichał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180714173703.7894-1-chris@chris-wilson.co.ukReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

While debugging we may want to examine params passed to GuC.

v2: drop #ifdef DEBUG_GUC - Michal
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com> #1
Cc: Michal Winiarski <michal.winiarski@intel.com>
Reviewed-by: NMichał Winiarski <michal.winiarski@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618111821.47088-1-michal.wajdeczko@intel.com