Enforce congruency of userspace shared mappings
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Fix the one zillion warnings
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

This is the meat of the series which prevents any dcache alias creation
by always keeping the U and K mapping of a page congruent.
If a mapping already exists, and other tries to access the page, prev
one is flushed to physical page (wback+inv)

Essentially flush_dcache_page()/copy_user_highpage() create K-mapping
of a page, but try to defer flushing, unless U-mapping exist.
When page is actually mapped to userspace, update_mmu_cache() flushes
the K-mapping (in certain cases this can be optimised out)

Additonally flush_cache_mm(), flush_cache_range(), flush_cache_page()
handle the puring of stale userspace mappings on exit/munmap...

flush_anon_page() handles the existing U-mapping for anon page before
kernel reads it via the GUP path.

Note that while not complete, this is enough to boot a simple
dynamically linked Busybox based rootfs
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

This preps the low level dcache flush helpers to take vaddr argument in
addition to the existing paddr to properly flush the VIPT dcache
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Nothing semantical
* simplify the alignement code by using & operation only
* rename variables clearly as paddr
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

vaddr used to index the cache was clipped from the wrong end, and thus
would potentially fail to flush the correct lines.

The problem was dorment for so long because up until the recent
optimizations it was only used for ptrace break-point only flushes.
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

flush_dcache_page( ) is MM hook to ensure that a page has consistent
views between kernel and userspace. Thus it is called when

* kernel writes to a page which at some later point could get mapped to
  userspace (so kernel mapping needs to be flushed-n-inv)
* kernel is about to read from a page with possible userspace mappings
  (so userspace mappings needs to be made coherent with kernel ones)

However for Non aliasing VIPT dcache, any userspace mapping will always
be congruent to kernel mapping. Thus d-cache need need not be flushed at
all (or delayed indefinitely).

The only reason it does need to be flushed is when mapping code pages.
Since icache doesn't snoop dcache, those dirty dcache lines need to be
written back to memory and icache line invalidated so that icache lines
fetch will get the right data.

Decent gains on LMBench fork/exec/sh and File I/O micro-benchmarks.

(1) FPGA @ 80 MHZ

Processor, Processes - times in microseconds - smaller is better
------------------------------------------------------------------------------
Host                 OS  Mhz null null      open slct sig  sig  fork exec sh
                             call  I/O stat clos TCP  inst hndl proc proc proc
--------- ------------- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
3.9-rc6-a Linux 3.9.0-r   80 4.79 8.72 66.7 116. 239. 8.39 30.4 4798 14.K 34.K
3.9-rc6-b Linux 3.9.0-r   80 4.79 8.62 65.4 111. 239. 8.35 29.0 3995 12.K 30.K
3.9-rc7-c Linux 3.9.0-r   80 4.79 9.00 66.1 106. 239. 8.61 30.4 2858 10.K 24.K
                                                                ^^^^ ^^^^ ^^^

File & VM system latencies in microseconds - smaller is better
-------------------------------------------------------------------------------
Host                 OS   0K File      10K File     Mmap    Prot   Page 100fd
                        Create Delete Create Delete Latency Fault  Fault selct
--------- ------------- ------ ------ ------ ------ ------- ----- ------- -----
3.9-rc6-a Linux 3.9.0-r  317.8  204.2 1122.3  375.1 3522.0 4.288     20.7 126.8
3.9-rc6-b Linux 3.9.0-r  298.7  223.0 1141.6  367.8 3531.0 4.866     20.9 126.4
3.9-rc7-c Linux 3.9.0-r  278.4  179.2  862.1  339.3 3705.0 3.223     20.3 126.6
                         ^^^^^  ^^^^^  ^^^^^  ^^^^

(2) Customer Silicon @ 500 MHz (166 MHz mem)

------------------------------------------------------------------------------
Host                 OS  Mhz null null      open slct sig  sig  fork exec sh
                             call  I/O stat clos TCP  inst hndl proc proc proc
--------- ------------- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
abilis-ba Linux 3.9.0-r  497 0.71 1.38 4.58 12.0 35.5 1.40 3.89 2070 5525 13.K
abilis-ca Linux 3.9.0-r  497 0.71 1.40 4.61 11.8 35.6 1.37 3.92 1411 4317 10.K
                                                                ^^^^ ^^^^ ^^^
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

start address is already page aligned and size is const PAGE_SIZE,
thus fixups for alignment not needed in generated code.

bloat-o-meter vmlinux-mm5 vmlinux
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-32 (-32)
function                                     old     new   delta
__inv_icache_page                             82      50     -32
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

No users of this code anymore - so RIP !
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Now that we have same helper used for all icache invalidates (i.e.
vaddr+paddr based exact line invalidate), consolidate the open coded
calls into one place.

Also rename flush_icache_range_vaddr => __sync_icache_dcache
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

This change continues the theme from prev commit - this time icache
handling for kernel's own code modification (vmalloc: loadable modules,
breakpoints for kprobes/kgdb...)

flush_icache_range() calls the CDU icache helper with vaddr to enable
exact line invalidate.

For a true kernel-virtual mapping, the vaddr is actually virtual hence
valid as index into cache. For kprobes breakpoint however, the vaddr arg
is actually paddr - since that's how normal kernel is mapped in ARC
memory map.  This implies that CDU will use the same addr for
indexing as for tag match - which is fine since kernel code would only
have that "implicit" mapping and none other.

This should speed up module loading significantly - specially on default
ARC700 icache configurations (32k) which alias.
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

ARC icache doesn't snoop dcache thus executable pages need to be made
coherent before mapping into userspace in flush_icache_page().

However ARC700 CDU (hardware cache flush module) requires both vaddr
(index in cache) as well as paddr (tag match) to correctly identify a
line in the VIPT cache. A typical ARC700 SoC has aliasing icache, thus
the paddr only based flush_icache_page() API couldn't be implemented
efficiently. It had to loop thru all possible alias indexes and perform
the invalidate operation (ofcourse the cache op would only succeed at
the index(es) where tag matches - typically only 1, but the cost of
visiting all the cache-bins needs to paid nevertheless).

Turns out however that the vaddr (along with paddr) is available in
update_mmu_cache() hence better suits ARC icache flush semantics.
With both vaddr+paddr, exactly one flush operation per line is done.
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

munmap ends up calling tlb_flush() which for ARC was flushing the entire
TLB unconditionally (by moving the MMU to a new ASID)

do_munmap
  unmap_region
    unmap_vmas
      unmap_single_vma
         unmap_page_range
            tlb_start_vma
            zap_pud_range
            tlb_end_vma()
  tlb_finish_mmu
    tlb_flush()  ---> unconditional flush_tlb_mm()

So even a single page munmap, a frequent operation when uClibc dynamic
linker (ldso) is loading the dependent shared libraries, would move the
the ASID multiple times - needlessly invalidating the pre-faulted TLB
entries (and increasing the rate of ASID wraparound + full TLB flush).

This is now optimised to only be called if tlb->full_mm (which means
for exit/execve) cases only. And for those cases, flush_tlb_mm() is
already optimised to be a no-op for mm->mm_users == 0.

So essentially there are no mmore full mm flushes - except for fork which
anyhow needs it for properly COW'ing parent address space.

munmap now needs to do TLB range flush, which is implemented with
tlb_end_vma()

Results
-------
1. ASID now consistenly moves by 4 during a simple ls (as opposed to 5 or
   7 before).

2. LMBench microbenchmark also shows improvements

Basic system parameters
------------------------------------------------------------------------------
Host                 OS Description              Mhz  tlb  cache  mem scal
                                                     pages line   par load
                                                           bytes
--------- ------------- ----------------------- ---- ----- ----- ------ ----
3.9-rc5-0 Linux 3.9.0-r 3.9-rc5-0404-gcc-4.4-ba   80     8    64 1.1000 1
3.9-rc5-0 Linux 3.9.0-r 3.9-rc5-0405-avoid-full   80     8    64 1.1200 1

Processor, Processes - times in microseconds - smaller is better
------------------------------------------------------------------------------
Host                 OS  Mhz null null      open slct sig  sig  fork exec sh
                             call  I/O stat clos TCP  inst hndl proc proc proc
--------- ------------- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
3.9-rc5-0 Linux 3.9.0-r   80 4.81 8.69 68.6 118. 239. 8.53 31.6 4839 13.K 34.K
3.9-rc5-0 Linux 3.9.0-r   80 4.46 8.36 53.8 91.3 223. 8.12 24.2 4725 13.K 33.K

File & VM system latencies in microseconds - smaller is better
-------------------------------------------------------------------------------
Host                 OS   0K File      10K File     Mmap    Prot   Page 100fd
                        Create Delete Create Delete Latency Fault  Fault selct
--------- ------------- ------ ------ ------ ------ ------- ----- ------- -----
3.9-rc5-0 Linux 3.9.0-r  314.7  223.2 1054.9  390.2  3615.0 1.590 20.1 126.6
3.9-rc5-0 Linux 3.9.0-r  265.8  183.8 1014.2  314.1  3193.0 6.910 18.8 110.4
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

This adds support for an ARC Virtual Platform. This platform is based on the
System C standard promoted by the OSCI (Open System C Initiative) and uses
nSIM to simulate the ARC CPU core itself.

Users can build a virtual SoC by combining System C models of peripherals
and CPU cores.
Signed-off-by: NMischa Jonker <mjonker@synopsys.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

The original device tree was written using a slightly different
implementation of the fixed-factor-clock device tree binding. The
compatible string must be modified in order to be compatible with the
new implementation.
Signed-off-by: NChristian Ruppert <christian.ruppert@abilis.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Infrastructure required to make the Linux kernel compile and boot on the
Abilis Systems TB10x series of SOCs based on ARC700 CPUs:
  - Kmake related files (Kconfig, Makefile, tb10x_defconfig)
  - TB10x platform initialisation
Signed-off-by: NChristian Ruppert <christian.ruppert@abilis.com>
Signed-off-by: NPierrick Hascoet <pierrick.hascoet@abilis.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

These are the device tree files for the Abilis Systems TB100 and TB101 ICs and
their respective development kit PCBs. These files are committed in preparation
of the following patch set which adds support for these chips to the ARC
platform.
Signed-off-by: NChristian Ruppert <christian.ruppert@abilis.com>
Signed-off-by: NPierrick Hascoet <pierrick.hascoet@abilis.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

This patch adds some room for CPU-external interrupt controllers in the
Linux interrupt space. Until now, only the 32 CPU internal interrupt lines
were supported which does not allow for external interrupt controllers such
as GPIO modules etc.
Signed-off-by: NChristian Ruppert <christian.ruppert@abilis.com>
Signed-off-by: NPierrick Hascoet <pierrick.hascoet@abilis.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

arc-intc is initialized in arc common code as it is applicable to all
platforms. However platforms with their own external intc still need to
refer to it for correct DT interrupt tree hierarchy setup,

e.g.
static struct of_device_id __initdata tb10x_irq_ids[] = {
	{ .compatible = "snps,arc700-intc", .data = dummy_init_irq },
	{ .compatible = "abilis,tb10x_ictl", .data = tb10x_init_irq },
	{},
};

The fix is to use the generic irqchip framework to tie all irqchips in
a special linker section and then call irqchip_init() which calls the
DT of_irq_init() for all the intc in one go.

That way the platform code need not be aware of arc-intc at all.
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

The existing code was wrong on several counts:

* uboot provided bootargs were copied into @boot_command_line, only to
  be over-written by setup_machine_fdt(), effectively lost

* @cmdline_p returned by setup_arch() to start_kernel() didn't include
  the DT /bootargs
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Given that DeviceTree /bootargs can provide similar functionality,
no point in providing duplicate infrastructure.
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

* Allow initramfs path to be symlink
* CONFIG_PREEMPT be default
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

The fixup code correctly updates the callee-regs on stack, but
fails to unwind it into actual register file. Thus userspace won't see
the update.
Reported-by: NNoam Camus <noamc@ezchip.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

If CONFIG_ARC_MISALIGN_ACCESS is not enabled, or if the fixup fails,
call the same error handler: same signal/si_code to user (SIGBUS)
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

* Remove the line-break between scratch/callee-regs (sneaked in when we
  converted from printk to pr_*

* Use %pS to print the symbol names of faulting PC (ret pseudo register)
  and BLINK (call return register)

* Don't print user-vma for a kernel crash (only do it for
  print-fatal-signals based regfile dump)

* Verbose print the Interrupt/Exception Enable/Active state

* for main executable link address is 0x10000 based (vs. 0) thus offset
  of faulting PC needs to be adjusted
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Signed-off-by: NNoam Camus <noamc@ezchip.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Signed-off-by: NNoam Camus <noamc@ezchip.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

This tracks mainline commit ae903caa "Bury the conditionals from
kernel_thread/kernel_execve series" which we missed out as ARC port was
not yet mainline.

[vgupta: commit log modified]
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Currently, for every ARC kernel build I see the following:

--------------->8-----------------
  DTB    arch/arc/boot/dts/angel4.dtb.S
  AS      arch/arc/boot/dts/angel4.dtb.o
  LD      arch/arc/boot/dts/built-in.o
rm arch/arc/boot/dts/angel4.dtb.S        <-- forces rebuild next iter
  CHK     kernel/config_data.h
--------------->8-----------------

This is because *.dts.S is intermediate file in dtb generation and is by
default deleted by make which needs a ".SECONDARY" hint to NOT do so.

This could have ideally been done in scripts/Makefile.lib - for benefit
of all, however .SECONDARY doesn't seem to work with wildcards.

Thanks to Stephen for suggesting .SECONDARY (vs .PRECIOUS) and making
that work using a non wildcard version in arch makefile.

Thanks to James Hogan for pointing out that *.dtb.S now needs to be
added to clean-files
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

commit "fs: make binfmt support for #! scripts modular and removable"
made support for #!scripts optional - thus need to include the Kconfig
file to get all relevant BINFMT_*
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Currently ARC_HAS_LLSC can be influenced by platform for SMP only using
ARC_HAS_COH_LLSC. For !SMP it defaults to "y".

It turns out that some customers can't support it all, even in UP.
So we change the semantics, and use a negative dependency ARC_CANT_LLSC.
Any platform (independent of SMP or !SMP) can select it to disable LLSC.
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

arch/arc/kernel/traps.c no longer compiles without explicitly including
asm/kprobes.h
Signed-off-by: NChristian Ruppert <christian.ruppert@abilis.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

The existing uImage target always generates gzip compressed image which
drags bootup for some very slow FPGA customer boards.

So introduce seperate make targets:uImage.{bin,gz} with uncompressed
being default. Also tie gz generation to CONFIG_KERNEL_GZIP, which a
platform can select in it's Kconfig if it wishes gz to be default.
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

We do cross compiles for ARC Linux.
With gcc 4.7, a make defconfig spews out the following:

------------------->8--------------------------
make ARCH=arc defconfig
gcc: error: unrecognized command line option '-marc600'
gcc: error: unrecognized command line option '-mA7'
gcc: error: unrecognized command line option '-mno-sdata'
gcc: error: unrecognized command line option '-mno-mpy'
*** Default configuration is based on 'fpga_defconfig'
------------------->8--------------------------

This apparently is coming from LIBGCC line - which is strange to be
invoked for defconfig generation.
Reported-by: NAlexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

There's no (Kconfig) macro CONFIG_BLOCK_DEV_RAM. (CONFIG_BLK_DEV_RAM
does exist though.) But linux/blk.h got killed in 2005 anyway (in a
patch titled "kill blk.h"), so these three lines can be removed.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Some header files were included twice in the same file.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Fixes the following coding style issues as detected by checkpatch:
ERROR: space required before the open parenthesis '('
ERROR: "foo * bar" should be "foo *bar"
WARNING: space prohibited between function name and open parenthesis '('
WARNING: please, no spaces at the start of a line
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Silences the following checkpatch warnings:
WARNING: Use #include <linux/ptrace.h> instead of <asm/ptrace.h>
WARNING: Use #include <linux/kprobes.h> instead of <asm/kprobes.h>
WARNING: Use #include <linux/kgdb.h> instead of <asm/kgdb.h>
WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>
WARNING: Use #include <linux/cache.h> instead of <asm/cache.h>
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>