Struct pci_controller doesn't prepare for the dependent data of each
specific bus. This patch adds private member to struct pci_controller.
Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Op_model_cell supports native Cell. By returning -EINVAL, oprofile
uses timer interrupt on Cell LPAR.
Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This patch changes handling return value of ppc_md.hpte_insert() into
the same way as __hash_page_*().
Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

spu->register_lock should be held before accessing registers.
Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The system call entry code will clear the high bits of argument
registers before invoking the system call; don't report whatever noise
happens to be in the high bits of the register before that happens.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

I suspect this was meant to be added like it was to a whole slew of
other u-boot based boards, but probably just fell through the cracks.

Add "select DEFAULT_UIMAGE" for the 8641/HPC-NET.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Note all POWER3/POWER4 systems where fixup_winbond_82c105 will run.
Signed-off-by: NOlaf Hering <olaf@aepfle.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Identify CPC9x5 PCI Express, AGP, and HT host bridges using
device_type and compatible properties, which is a more flexible method
than using the name property (which can differ between firmwares and
models).
Signed-off-by: NNathan Lynch <ntl@pobox.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

apply_relocate_add() does not support R_PPC_ADDR16_HI relocations, which
prevents some non gcc-built modules to be loaded.
Signed-off-by: NSimon Vallet <svallet@gmail.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Remove redundant argument check for of_node_get().
It's ok to remove 'node' check because in real life cpm2_pic_init()
never gets called with node == NULL.
Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

No need for ?: as of_node_get() can handle NULL argument.
Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl>

 arch/powerpc/sysdev/qe_lib/qe_ic.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Signed-off-by: NPaul Mackerras <paulus@samba.org>

No need for ?: because of_node_get() can handle NULL argument.
Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

No need for ?: because of_node_get() can handle NULL argument.
Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Remove redundant argument check for of_node_put().
Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Remove redundant argument checks for of_node_get() and of_node_put().
Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

- Drivers will not rely on the PCI config space value, as they've
  already been conditioned to rely on the irq field in "struct pci_dev".

- The virq value may not be < 256 as it has been remapped.

- The PCI config space should reflect the hardware configuration, which
  is not being changed.  We are only creating a virtual irq mapping that
  exists in the kernel only. One would never expect the PCI hardware to
  generate the "virq" interrupt.
Signed-off-by: NMichal Ostrowski <mostrows@watson.ibm.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

I often test new versions of glibc by doing:

LD_LIBRARY_PATH=/XXX/lib /XXX/lib/ld.so.1 <binary>

One test case ended up SEGV'ing. Upon closer inspection ld.so was loaded
at 0x8000000 (128MB) with the heap right after it. Since we normally
link binaries at 0x10000000 (256MB) we only had about 128MB of space for
the heap:

00100000-00103000 r-xp 00100000 00:00 0           [vdso]
08000000-0801e000 r-xp 00000000 00:01 33079       /lib/ld-2.5.so
0802d000-0802f000 rwxp 0001d000 00:01 33079       /lib/ld-2.5.so
0802f000-08050000 rwxp 0802f000 00:00 0           [heap]
0fe91000-0ffd9000 r-xp 00000000 00:01 33082       /lib/libc-2.5.so
0ffd9000-0ffe8000 ---p 00148000 00:01 33082       /lib/libc-2.5.so
0ffe8000-0ffea000 r--p 00147000 00:01 33082       /lib/libc-2.5.so
0ffea000-0ffed000 rwxp 00149000 00:01 33082       /lib/libc-2.5.so
10000000-10004000 r-xp 00000000 00:01 76          /bin/sleep
10013000-10014000 rwxp 00003000 00:01 76          /bin/sleep
ffb41000-ffb56000 rw-p ffb41000 00:00 0           [stack]

One way to fix this is move ELF_ET_DYN_BASE from 0x08000000 to 0x20000000.
This allows 128MB for the binary (hopefully enough for even the most
crazy c++ apps), and with our current layout we will grow the heap up
and the stack down, allowing potentially gigabytes of heap:

00100000-00103000 r-xp 00100000 00:00 0           [vdso]
0fe8a000-0ffd3000 r-xp 00000000 00:01 3350        /lib/tls/libc-2.3.6.so
0ffd3000-0ffe3000 ---p 00149000 00:01 3350        /lib/tls/libc-2.3.6.so
0ffe3000-0ffea000 r--p 00149000 00:01 3350        /lib/tls/libc-2.3.6.so
0ffea000-0ffee000 rwxp 00150000 00:01 3350        /lib/tls/libc-2.3.6.so
10000000-10004000 r-xp 00000000 00:01 76          /bin/sleep
10013000-10014000 rwxp 00003000 00:01 76          /bin/sleep
20000000-20018000 r-xp 00000000 00:01 3478        /lib/ld-2.3.6.so
20028000-20029000 r--p 00018000 00:01 3478        /lib/ld-2.3.6.so
20029000-2002a000 rwxp 00019000 00:01 3478        /lib/ld-2.3.6.so
2002a000-2004b000 rwxp 2002a000 00:00 0           [heap]
ffd67000-ffd7c000 rw-p ffd67000 00:00 0           [stack]
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Clarify error message re EEH permanent failure.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Use is_init() rather than hard coded pid comparison.

Cc: Anton Blanchard <anton@samba.org>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

ps3_free_io_irq: Fix inverted error check after calling
lv1_destruct_io_irq_outlet().
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Allow to build a uniprocessor kernel for PS3.
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The current PDA code, which went in in post 2.6.19 has a flaw in that it
doesn't correctly cycle the GDT and %GS segment through the boot PDA,
the CPU PDA and finally the per-cpu PDA.

The bug generally doesn't show up if the boot CPU id is zero, but
everything falls apart for a non zero boot CPU id.  The basically kills
voyager which is perfectly capable of doing non zero CPU id boots, so
voyager currently won't boot without this.

The fix is to be careful and actually do the GDT setups correctly.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.infradead.org/mtd-2.6: (84 commits)
  [JFFS2] debug.h: include <linux/sched.h> for current->pid
  [MTD] OneNAND: Handle DDP chip boundary during read-while-load
  [MTD] OneNAND: return ecc error code only when 2-bit ecc occurs
  [MTD] OneNAND: Implement read-while-load
  [MTD] OneNAND: fix onenand_wait bug in read ecc error
  [MTD] OneNAND: release CPU in cycles
  [MTD] OneNAND: add subpage write support
  [MTD] OneNAND: fix onenand_wait bug
  [JFFS2] use the ref_offset macro
  [JFFS2] Reschedule in loops
  [JFFS2] Fix error-path leak in summary scan
  [JFFS2] add cond_resched() when garbage collecting deletion dirent
  [MTD] Nuke IVR leftovers
  [MTD] OneNAND: fix oob handling in recent oob patch
  [MTD] Fix ssfdc blksize typo
  [JFFS2] replace kmalloc+memset with kzalloc
  [MTD] Fix SSFDC build for variable blocksize.
  [MTD] ESB2ROM uses PCI
  [MTD] of_device-based physmap driver
  [MTD] Support combined RedBoot FIS directory and configuration area
  ...

Both "=r" and "=g" breaks my build on i386:

  $ make
    CC [M]  drivers/kvm/vmx.o
  {standard input}: Assembler messages:
  {standard input}:3318: Error: bad register name `%sil'
  make[1]: *** [drivers/kvm/vmx.o] Error 1
  make: *** [_module_drivers/kvm] Error 2

The reason is that setbe requires an 8-bit register but "=r" does not
constrain the target register to be one that has an 8-bit version on
i386.

According to

	http://gcc.gnu.org/bugzilla/show_bug.cgi?id=10153

the correct constraint is "=q".
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6:
  PCI: fix pci-driver kernel-doc
  PCI: rework Documentation/pci.txt
  PCI: Unhide the SMBus on the Asus P4P800-X

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: unusual_devs.h entry for nokia 6233
  USB: Fix for typo in ohci-ep93xx.c
  USB: disable USB_MULTITHREAD_PROBE
  USB: add vendor/device id for Option GT Max 3.6 cards
  USB: unusual_devs.h for 0x046b:ff40
  USB: make usbhid ignore Imation Disc Stakka
  USB: rndis_host: fix crash while probing a Nokia S60 mobile
  USB: asix: Detect internal PHY and enable/use accordingly
  usbtouchscreen: make ITM screens report BTN_TOUCH as zero when not touched

Function short description should be on only one line.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Rewrite Documentation/pci.txt:
o restructure document to match how API is used when writing init code.
o update to reflect changes in struct pci_driver function pointers.
o removed language on "new style vs old style" device discovery.
  "Old style" is now deprecated. Don't use it. Left description in
  to document existing driver behaviors.
o add section "Legacy I/O Port free driver" by Kenji Kaneshige
  http://lkml.org/lkml/2006/11/22/25
  (renamed to "pci_enable_device_bars() and Legacy I/O Port space")
o add "MMIO space and write posting" section to help avoid common pitfall
  when converting drivers from IO Port space to MMIO space.
  Orignally posted http://lkml.org/lkml/2006/2/27/24
o many typo/grammer/spelling corrections from Randy Dunlap
o two more spelling corrections from Stephan Richter
o fix CodingStyle as per Randy Dunlap
Signed-off-by: NGrant Grundler <grundler@parisc-linux.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Unhide the SMBus on the Asus P4P800-X (and probably some other
models of the family.) This gives access to the memory module SPD
EEPROMs.

Thanks to Winbond for supporting the lm-sensors project with the
donation of this motherboard.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

In appendix a patch for the nokia 6233 mobile phone is included.
The patch is against 2.6.20-rc5. It is my first patch. Hopefully it has
the right format. The code makes my nokia 6233 on my computer work.


From: Manuel Osdoba <manuel.osdoba@tu-ilmenau.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Attached patch fixes typo in USB driver reported by Chase Douglas on linux-cirrus mailing
list. http://www.freelists.org/archives/linux-cirrus/12-2006/msg00003.htmlSigned-off-by: NPetr Stetiar <ynezz@true.cz>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Disable the USB_MULTITHREAD_PROBE option because it causes crashes on
people's machines and they never remember to actually read the config
help files.

No one likes this, everyone hates it, I'm going to go eat worms...

The full logic will be ripped out later.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This fixes http://bugzilla.kernel.org/show_bug.cgi?id=7814Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

American Megatrends did something wrong in their floppy emulator. It breaks
with both kinds of MODE SENSE which our stack sends. Alan and I tried a few
tweaks, and got LUNs sensed right, but US_FL_NO_WP_DETECT is still needed.

I set the firmware bracket to 1.00 exactly, in case AMI or Sun fix it with a
firmware update. Hey, you never know.
Signed-off-by: NPete Zaitcev <zaitcev@redhat.com>
Signed-off-by: NPhil Dibowitz <phil@ipom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

on request of the sourceforge project for this device, a kind of
robotized CD storage, it should be ignored by the generic driver.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Bug fix for driver rndis_host which fixes rndis_host probing certain
Nokia S60 (Series 60) mobiles. While the rndis_host get probed by usbnet
and tries to bind the Nokia mobile the bind is going to fail. The
rndis_host module tries to release the device, in a wrong way, which
cause the oops.

Fixes Bugzilla #7201
Signed-off-by: NDaniel Gollub <dgollub@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Different AX88772 dongles use different PHYs; the chip is capable of using
both a primary and secondary PHY, and supports an internal and external PHY.

It appears that some DUB-E100 devices use the internal PHY, so trying to use
an external one will not work (note that this is different across revisions,
as well; the "A" and "B" revs of the DUB-E100 use different PHYs!).  The data
sheet for the AX88772 chip specifies that the internal PHY id will be 0x10,
so if that's read from the EEPROM, we should use that rather than attempting
to use an external PHY.

Thanks to Mitch Bradley for pointing this out!
Signed-off-by: NAndres Salomon <dilinger@debian.org>
Cc: David Hollis <dhollis@davehollis.com>
Cc: Chris Ball <cjb@laptop.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

ITM screens send invalid x/y data when not touched. this was fixes a while ago
but the problem is if the screen is not touched anymore the driver never does
not report BTN_TOUCH as zero. fix it by sending the report with the last valid
coordinates when pressure is released.
Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch>
Cc: J.P. Delport <jpdelport@csir.co.za>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  ocfs2: Add backup superblock info to ocfs2_fs.h
  ocfs2: cleanup ocfs2_iget() errors
  ocfs2: Directory c/mtime update fixes
  ocfs2: Don't print errors when following symlinks