This patch enables omap_serial_early_init() function for OMAP4430
SDP. Without this the bootup would throw oops in omap_serial_init().

Note that the ifndef CONFIG_ARCH_OMAP4 is split into two sections
to enable omap_serial_early_init(). This ifndef cannot be removed
until omap4 clock framework is implemented.
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-By: NTony Lindgren <tony@atomide.com>
Reviewed-By: NKevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

UART3 is in the PER powerdomain.  If PER goes idle/inactive
independently of CORE, for UART3 to wakeup it must have its wakeup
enable bits setup in PM_WKEN_PER.  This patch enables these bits.

The reason it works when PER and CORE work together is because when
CORE goes inactive/retention, the IOPAD wakeups are enabled and
trigger UART3 wakeup.

Without this patch, when the UART inactivity timer fires for UART3,
its clocks are disabled and it's unable to wakeup so will be unusable
until PER is awoken by another source.

Another way of testing is by keeping CORE on during suspend but
allowing PER to hit retention

  # echo 3 > /debug/pm_debug/core_pwrdm/suspend

then enter suspend

  # echo mem > /sys/power/state

Without this patch, UART3 will be unable to wakeup the system.
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

With the recent changes omap serial ports match the physical
numbering like they should. Fix the kernel CMDLINE accordingly
so console works.
Signed-off-by: NTony Lindgren <tony@atomide.com>

Otherwise the machine_is_nokia_n8*() does not work.
Signed-off-by: NTony Lindgren <tony@atomide.com>

DSP public peripherals used to work on OMAP1510 based (or all OMAP1 class?)
machines as long as old dspgateway code were present in the l-o tree. For
several months it is no longer included, breaking support for McBSP1 based
audio on Amstrad Delta, for example.

This patch, derived from the old dspgateway code, corrects the problem for the
board by simply taking the DSP out of reset state, I guess. That way, things
should not break when a new dsp code is added to the tree, and the change can
be reverted then.

If there are any reports on McBSP1 or other DSP public peripherals not working
for other OMAP1 machines (I've not heard of any for now), I can prepare a more
general patch providing an extra include file with a helper function defined.

Created and tested against linux-2.6.32-rc5
Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Commit 15ac408e removed enabled_uart
and OMAP_TAG_UART. This works for mach-omap2, but causes issues on
mach-omap1 for some boards as the mach-omap1 serial.c was muxing
pins based on the enabled_uart flag for 15xx.

Fix this by muxing pins in board-*.c files for the 15xx boards for
the uart ports that had enabled_uart flag set before the commit
above.

Tested on Amsdtrad Delta only.

Note that in the future we should add support for powering down
the uarts with a timer like mach-omap2/serial.c does. Otherwise
the enabled uarts will be blocking retention-while-idle.
Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: NTony Lindgren <tony@atomide.com>

A bit (2 << 0) is set both on SECTION and SUPERSECTION. To identify
SUPERSECTION correctly, other bits should be compared too.
Reported-by: N"Srinivas Pulukuru" <srinivas.pulukuru@ti.com>
Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

OMAP sDMA driver API omap_stop_dma() doesn't really stop the dma when used
in linking scenario.

The DMA channel needs to be disabled before resetting the chain.
Also fix clearing of the OMAP_DMA_ACTIVE status in the linked case.

Cc: Hari n <hari.zoom@gmail.com>
Cc: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NVenkatraman S <svenkatr@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

omap: Fix omap-keypad by restoring old keypad.h without breaking omap2 boards that use matrix_keypad

Only mach-omap2 boards are currently using matrix_keypad. Allow
mach-omap1 boards to use the old style keypad.h without breaking.

Created against linux-2.6.32-rc5.
Compile tested with omap_3430sdp_defconfig and rx51_defconfig.
Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: NTony Lindgren <tony@atomide.com>

* 'docs-next' of git://git.lwn.net/linux-2.6:
  Update flex_arrays.txt

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: fix socket fd translation
  dlm: fix lowcomms_connect_node for sctp

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  Revert "x86: linker script syntax nits"
  x86, perf_event: Rename 'performance counter interrupt'

The destination keyring specified to request_key() and co. is made available to
the process that instantiates the key (the slave process started by
/sbin/request-key typically).  This is passed in the request_key_auth struct as
the dest_keyring member.

keyctl_instantiate_key and keyctl_negate_key() call get_instantiation_keyring()
to get the keyring to attach the newly constructed key to at the end of
instantiation.  This may be given a specific keyring into which a link will be
made later, or it may be asked to find the keyring passed to request_key().  In
the former case, it returns a keyring with the refcount incremented by
lookup_user_key(); in the latter case, it returns the keyring from the
request_key_auth struct - and does _not_ increment the refcount.

The latter case will eventually result in an oops when the keyring prematurely
runs out of references and gets destroyed.  The effect may take some time to
show up as the key is destroyed lazily.

To fix this, the keyring returned by get_instantiation_keyring() must always
have its refcount incremented, no matter where it comes from.

This can be tested by setting /etc/request-key.conf to:

#OP	TYPE	DESCRIPTION	CALLOUT INFO	PROGRAM ARG1 ARG2 ARG3 ...
#======	=======	===============	===============	===============================
create  *	test:*		*		|/bin/false %u %g %d %{user:_display}
negate	*	*		*		/bin/keyctl negate %k 10 @u

and then doing:

	keyctl add user _display aaaaaaaa @u
        while keyctl request2 user test:x test:x @u &&
        keyctl list @u;
        do
                keyctl request2 user test:x test:x @u;
                sleep 31;
                keyctl list @u;
        done

which will oops eventually.  Changing the negate line to have @u rather than
%S at the end is important as that forces the latter case by passing a special
keyring ID rather than an actual keyring ID.
Reported-by: NAlexander Zangerl <az@bond.edu.au>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Tested-by: NAlexander Zangerl <az@bond.edu.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/pci: Fix MODPOST warning
  powerpc/oprofile: Add ppc750 CL as supported by oprofile
  powerpc: warning: allocated section `.data_nosave' not in segment
  powerpc/kgdb: Fix build failure caused by "kgdb.c: unused variable 'acc'"
  powerpc: Fix hypervisor TLB batching
  powerpc/mm: Fix hang accessing top of vmalloc space
  powerpc: Fix memory leak in axon_msi.c
  powerpc/pmac: Fix issues with sleep on some powerbooks
  powerpc64/ftrace: use PACA to retrieve TOC in mod_return_to_handler
  powerpc/ftrace: show real return addresses in modules

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI button: don't try to use a non-existent lid device
  ACPI: video: Loosen strictness of video bus detection code
  eeepc-laptop: Prevent a panic when disabling RT2860 wireless when associated
  eeepc-laptop: Properly annote eeepc_enable_camera().
  ACPI / PCI: Fix NULL pointer dereference in acpi_get_pci_dev() (rev. 2)
  fujitsu-laptop: address missed led-class ifdef fixup
  ACPI: Kconfig, fix proc aggregator text
  ACPI: add AC/DC notifier

Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  OMAP2xxx clock: set up clockdomain pointer in struct clk
  OMAP: Fix race condition with autodeps
  omap: McBSP: Fix incorrect receiver stop in omap_mcbsp_stop
  omap: Initialization of SDRC params on Zoom2
  omap: RX-51: Drop I2C-1 speed to 2200
  omap: SDMA: Fixing bug in omap_dma_set_global_params()
  omap: CONFIG_ISP1301_OMAP redefined in Beagle defconfig

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: always pin metadata in discard mode
  Btrfs: enable discard support
  Btrfs: add -o discard option
  Btrfs: properly wait log writers during log sync
  Btrfs: fix possible ENOSPC problems with truncate
  Btrfs: fix btrfs acl #ifdef checks
  Btrfs: streamline tree-log btree block writeout
  Btrfs: avoid tree log commit when there are no changes
  Btrfs: only write one super copy during fsync

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  tty: fix vt_compat_ioctl

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  sysfs: Allow sysfs_notify_dirent to be called from interrupt context.
  sysfs: Allow sysfs_move_dir(..., NULL) again.

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: gadget: Fix EEM driver comments and VID/PID
  usb-storage: Workaround devices with bogus sense size
  USB: ehci: Fix IST boundary checking interval math.
  USB: option: Support for AIRPLUS MCD650 Datacard
  USB: whci-hcd: always do an update after processing a halted qTD
  USB: whci-hcd: handle early deletion of endpoints
  USB: wusb: don't use the stack to read security descriptor
  USB: rename Documentation/ABI/.../sysfs-class-usb_host

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: rt2860sta: prevent a panic when disabling when associated
  staging: more sched.h fixes
  Staging: et131x: Fix the add_10bit macro
  Staging: et131x: Correct WRAP bit handling
  staging: Complete sched.h removal from interrupt.h
  Staging: vme: fix sched.h build breakage
  Staging: poch: fix sched.h build breakage
  Staging: b3dfg: fix sched.h build breakage
  Staging: comedi: fix sched.h build breakage
  Staging: iio: Fix missing include <linux/sched.h>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (53 commits)
  vmxnet: fix 2 build problems
  net: add support for STMicroelectronics Ethernet controllers.
  net: ks8851_mll uses mii interfaces
  net/fec_mpc52xx: Fix kernel panic on FEC error
  net: Fix OF platform drivers coldplug/hotplug when compiled as modules
  TI DaVinci EMAC: Clear statistics register properly.
  r8169: partial support and phy init for the 8168d
  irda/sa1100_ir: check return value of startup hook
  udp: Fix udp_poll() and ioctl()
  WAN: fix Cisco HDLC handshaking.
  tcp: fix tcp_defer_accept to consider the timeout
  3c574_cs: spin_lock the set_multicast_list function
  net: Teach pegasus driver to ignore bluetoother adapters with clashing Vendor:Product IDs
  netxen: fix pci bar mapping
  ethoc: fix warning from 32bit build
  libertas: fix build
  net: VMware virtual Ethernet NIC driver: vmxnet3
  net: Fix IXP 2000 network driver building.
  libertas: fix build
  mac80211: document ieee80211_rx() context requirement
  ...

* branch 'tty-fixes'
  tty: use the new 'flush_delayed_work()' helper to do ldisc flush
  workqueue: add 'flush_delayed_work()' to run and wait for delayed work
  tty: Make flush_to_ldisc() locking more robust

The 2.6.32 merge window brought a number of changes to the flexible array
API; this patch updates the documentation to match the new state of
affairs.
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

This reverts commit e9a63a4e.

This breaks older binutils, where sink-less asserts are broken.

See this commit for further details:

  d2ba8b21: x86: Fix assert syntax in vmlinux.lds.S
Acked-by: N"H. Peter Anvin" <hpa@zytor.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <4AD6523D.5030909@zytor.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Merge reason: pull in latest, to be able to revert a patch there.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

vmxnet3 uses in_dev* interfaces so it should depend on INET.
Also fix so that the driver builds when CONFIG_PCI_MSI is disabled.

vmxnet3_drv.c:(.text+0x2a88cb): undefined reference to `in_dev_finish_destroy'

drivers/net/vmxnet3/vmxnet3_drv.c:1335: error: 'struct vmxnet3_intr' has no member named 'msix_entries'
drivers/net/vmxnet3/vmxnet3_drv.c:1384: error: 'struct vmxnet3_intr' has no member named 'msix_entries'
drivers/net/vmxnet3/vmxnet3_drv.c:2137: error: 'struct vmxnet3_intr' has no member named 'msix_entries'
drivers/net/vmxnet3/vmxnet3_drv.c:2138: error: 'struct vmxnet3_intr' has no member named 'msix_entries'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NBhavesh davda <bhavesh@vmware.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Call compat_unimap_ioctl, not do_unimap_ioctl.

This was broken by commit e9216651.

The compat_unimap_ioctl was originally called do_unimap_ioctl in
fs/compat_ioctl.h which got moved to drivers/char/vt_ioctl.c.
In that patch, the caller was not updated and consequently called
the native handler.
Signed-off-by: NAndreas Schwab <schwab@linux-m68k.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

clock24xx.c is missing a omap2_init_clk_clkdm() in its
omap2_clk_init() function.  Among other bad effects, this causes the
OMAP hwmod layer to oops on boot.

Thanks to Carlos Aguiar <carlos.aguiar@indt.org.br> and Stefano
Panella <Stefano.Panella@csr.com> for reporting this bug.  Thanks to Tony
Lindgren <tony@atomide.com> for N800 booting advice.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Cc: Carlos Aguiar <carlos.aguiar@indt.org.br>
Cc: Stefano Panella <Stefano.Panella@csr.com>
Cc: Tony Lindgren <tony@atomide.com>

There is a possible race condition in clockdomain
code handling hw supported idle transitions.

When multiple autodeps dependencies are being added
or removed, a transition of still remaining dependent
powerdomain can result in false readings of the
state counter. This is especially fatal for off mode
state counter, as it could result in a driver not
noticing a context loss.

Fixed by disabling hw supported state transitions
when autodeps are being changed.
Signed-off-by: NKalle Jokiniemi <kalle.jokiniemi@digia.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: sbp2: provide fallback if mgt_ORB_timeout is missing
  ieee1394: add documentation entry to MAINTAINERS
  ieee1394: update URLs in debugging-via-ohci1394.txt

* branch 'tty-fixes':
  tty: use the new 'flush_delayed_work()' helper to do ldisc flush
  workqueue: add 'flush_delayed_work()' to run and wait for delayed work
  Make flush_to_ldisc properly handle parallel calls

Merge branch 'topic/x86-lds-nits' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland

* 'topic/x86-lds-nits' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland:
  x86: linker script syntax nits