- 03 2月, 2016 1 次提交
-
-
由 Jiri Olsa 提交于
Introducing perf_hpp_list__for_each_format macro to iterate perf_hpp_list object's output entries. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1453109064-1026-20-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 02 2月, 2016 4 次提交
-
-
由 Namhyung Kim 提交于
When all callchains of a hist entry is percent-limited, do not add a blank line at the end. It makes the entry look like it doesn't have callchains. Reported-and-Tested-by: NJiri Olsa <jolsa@kernel.org> Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20160128122454.GA27446@danjae.kornetSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
When there's only a single callchain, perf doesn't print its percentage in front of the symbols. This is because it assumes that the percentage is same as parents. But if a percent limit is applied, it's possible that there are actually a couple of child nodes but only one of them is shown. In this case it should display the percent to prevent misunderstanding of its percentage is same as the parent's. For example, let's see the following callchain. $ perf report -s comm --percent-limit 0.01 --stdio ... 9.95% swapper | |--7.57%--intel_idle | cpuidle_enter_state | cpuidle_enter | call_cpuidle | cpu_startup_entry | | | |--4.89%--start_secondary | | | --2.68%--rest_init | start_kernel | x86_64_start_reservations | x86_64_start_kernel | |--0.15%--__schedule | | | |--0.13%--schedule | | schedule_preempt_disable | | cpu_startup_entry | | | | | |--0.09%--start_secondary | | | | | --0.04%--rest_init | | start_kernel | | x86_64_start_reservations | | x86_64_start_kernel | | | --0.01%--schedule_preempt_disabled | cpu_startup_entry ... Current code omits the percent if 'intel_idle' becomes the only node when percent limit is set to 0.5%, its percent is not 9.95% but users will assume it incorrectly. Before: $ perf report --percent-limit 0.5 --stdio ... 9.95% swapper | ---intel_idle cpuidle_enter_state cpuidle_enter call_cpuidle cpu_startup_entry | |--4.89%--start_secondary | --2.68%--rest_init start_kernel x86_64_start_reservations x86_64_start_kernel After: $ perf report --percent-limit 0.5 --stdio ... 9.95% swapper | --7.57%--intel_idle cpuidle_enter_state cpuidle_enter call_cpuidle cpu_startup_entry | |--4.89%--start_secondary | --2.68%--rest_init start_kernel x86_64_start_reservations x86_64_start_kernel Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1453909257-26015-7-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
Pass hist entry's period to graph callchain print function. This info is needed by later patch to determine whether it can omit percentage of top-level node or not. No functional change intended. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1453909257-26015-6-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
It's just a wrapper function to align the start position ofcallchains to 'comm' of each thread if it's a first sort key. But it doesn't not work with tracepoint events and also with upcoming hierarchy view. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1453909257-26015-5-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 07 1月, 2016 1 次提交
-
-
由 Namhyung Kim 提交于
When there are multiple events, each dynamic sort key is defined just for one event. In this case other events will always show "N/A" for those fields. But they are meaningless and consume precious screen width. Let's skip those undefined dynamic fields. $ perf record -e kmem:kmalloc,kmem:kfree -a sleep 1 $ perf report -s 'comm,kmalloc.*' --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 20K of event 'kmem:kmalloc' # Event count (approx.): 20533 # # Overhead Command call_site ptr bytes_req bytes_alloc gfp_flags # ........ ....... .................. .................. ......... ........... ................... # 99.89% perf ffffffffa01d4396 0xffff8803ffb79720 96 96 GFP_NOFS|GFP_ZERO 0.06% sleep ffffffff8114e1cd 0xffff8803d228a000 4096 4096 GFP_KERNEL 0.03% perf ffffffff811d6ae6 0xffff8803f7678f00 240 256 GFP_KERNEL|GFP_ZERO 0.00% perf ffffffff812263c1 0xffff880406172380 128 128 GFP_KERNEL 0.00% perf ffffffff812264b9 0xffff8803ffac1600 504 512 GFP_KERNEL 0.00% perf ffffffff81226634 0xffff880401dc5280 28 32 GFP_KERNEL 0.00% sleep ffffffff81226da9 0xffff8803ffac3a00 392 512 GFP_KERNEL # Samples: 20K of event 'kmem:kfree' # Event count (approx.): 20597 # # Overhead Command # ........ .............. # 99.63% perf 0.14% sleep 0.11% irq/36-iwlwifi 0.11% kworker/u16:0 0.01% Xorg 0.00% firefox Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Acked-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1450804030-29193-12-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 20 11月, 2015 3 次提交
-
-
由 Namhyung Kim 提交于
Now -g/--call-graph option supports how to display callchain values. Possible values are 'percent', 'period' and 'count'. The percent is same as before and it's the default behavior. The period displays the raw period value rather than the percentage. The count displays the number of occurrences. $ perf report --no-children --stdio -g percent ... 39.93% swapper [kernel.vmlinux] [k] intel_idel | ---intel_idle cpuidle_enter_state cpuidle_enter call_cpuidle cpu_startup_entry | |--28.63%-- start_secondary | --11.30%-- rest_init $ perf report --no-children --show-total-period --stdio -g period ... 39.93% 13018705 swapper [kernel.vmlinux] [k] intel_idel | ---intel_idle cpuidle_enter_state cpuidle_enter call_cpuidle cpu_startup_entry | |--9334403-- start_secondary | --3684302-- rest_init $ perf report --no-children --show-nr-samples --stdio -g count ... 39.93% 80 swapper [kernel.vmlinux] [k] intel_idel | ---intel_idle cpuidle_enter_state cpuidle_enter call_cpuidle cpu_startup_entry | |--57-- start_secondary | --23-- rest_init Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Acked-by: NBrendan Gregg <brendan.d.gregg@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1447047946-1691-6-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
This is a preparation to support for printing other type of callchain value like count or period. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Tested-by: NBrendan Gregg <brendan.d.gregg@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1447047946-1691-4-git-send-email-namhyung@kernel.org [ renamed new _sprintf_ operation to _scnprintf_ ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
Add new call chain option (-g) 'folded' to print callchains in a line. The callchains are separated by semicolons, and preceded by (absolute) percent values and a space. For example, the following 20 lines can be printed in 3 lines with the folded output mode: $ perf report -g flat --no-children | grep -v ^# | head -20 60.48% swapper [kernel.vmlinux] [k] intel_idle 54.60% intel_idle cpuidle_enter_state cpuidle_enter call_cpuidle cpu_startup_entry start_secondary 5.88% intel_idle cpuidle_enter_state cpuidle_enter call_cpuidle cpu_startup_entry rest_init start_kernel x86_64_start_reservations x86_64_start_kernel $ perf report -g folded --no-children | grep -v ^# | head -3 60.48% swapper [kernel.vmlinux] [k] intel_idle 54.60% intel_idle;cpuidle_enter_state;cpuidle_enter;call_cpuidle;cpu_startup_entry;start_secondary 5.88% intel_idle;cpuidle_enter_state;cpuidle_enter;call_cpuidle;cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel This mode is supported only for --stdio now and intended to be used by some scripts like in FlameGraphs[1]. Support for other UI might be added later. [1] http://www.brendangregg.com/FlameGraphs/cpuflamegraphs.htmlRequested-and-Tested-by: NBrendan Gregg <brendan.d.gregg@gmail.com> Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1447047946-1691-2-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 19 11月, 2014 1 次提交
-
-
由 Andi Kleen 提交于
Refactor the duplicated code to resolve the symbol name or the address of a symbol into a single function. Used in next patch to add common functionality. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1415844328-4884-6-git-send-email-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 12 8月, 2014 1 次提交
-
-
由 Namhyung Kim 提交于
Set column width and do not change it if user gives -w/--column-widths option. It'll truncate longer symbols than the width if exists. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1406785662-5534-5-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 17 7月, 2014 1 次提交
-
-
由 Jiri Olsa 提交于
And use verbose as an global object in following functions: __map_groups__fprintf_maps __map_groups__fprintf_removed_maps map_groups__fprintf_maps map_groups__fprintf Also making map_groups__fprintf_maps static. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1405374411-29012-2-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 01 6月, 2014 2 次提交
-
-
由 Namhyung Kim 提交于
On stdio, there's a problem that it shows invalid values for callchains in cumulated hist entries. It's because it only cares about the self period. But with --children behavior, we always add callchain info to the cumulated entries so it should use the value in that case. Before: # Children Self Command Shared Object Symbol # ........ ........ ....... ................. ................ # 61.22% 0.32% swapper [kernel.kallsyms] [k] cpu_idle | --- cpu_idle | |--16530.76%-- start_secondary | |--2758.70%-- rest_init | start_kernel | x86_64_start_reservations | x86_64_start_kernel --6837850969203030.00%-- [...] After: # Children Self Command Shared Object Symbol # ........ ........ ....... ................. ................ # 61.22% 0.32% swapper [kernel.kallsyms] [k] cpu_idle | --- cpu_idle | |--85.70%-- start_secondary | --14.30%-- rest_init start_kernel x86_64_start_reservations x86_64_start_kernel Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Cc: Arun Sharma <asharma@fb.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/1401335910-16832-24-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>
-
由 Namhyung Kim 提交于
If -g cumulative option is given, it needs to show entries which don't have self overhead. So apply percent-limit to accumulated overhead percentage in this case. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Tested-by: NArun Sharma <asharma@fb.com> Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/1401335910-16832-14-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>
-
- 21 5月, 2014 4 次提交
-
-
由 Namhyung Kim 提交于
Now we moved to the perf_hpp_[_sort]_list so no need to keep the old hist_entry__sort_list and sort__first_dimension. Also the hist_entry__sort_snprintf() can be gone as hist_entry__snprintf() provides the functionality. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1400480762-22852-18-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>
-
由 Namhyung Kim 提交于
Some fields missed to set default column length so it broke align in --stdio output. Add perf_hpp__reset_width() to set it to a sane default value. Note that this change will ignore -w/--column-widths option for now. Before: $ perf report -F cpu,comm,overhead --stdio ... # CPU Command Overhead # ............... ........ # 0 firefox 2.65% 0 kworker/0:0 1.45% 0 swapper 5.52% 0 synergys 0.92% 1 firefox 4.54% After: # CPU Command Overhead # ... ............... ........ # 0 firefox 2.65% 0 kworker/0:0 1.45% 0 swapper 5.52% 0 synergys 0.92% 1 firefox 4.54% Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1400480762-22852-17-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>
-
由 Namhyung Kim 提交于
When it converted sort entries to hpp formats, it missed se->elide handling, so add it for compatibility. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1400480762-22852-16-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>
-
由 Namhyung Kim 提交于
Until now the hpp and sort functions do similar jobs different ways. Since the sort functions converted/wrapped to hpp formats it can do the job in a uniform way. The perf_hpp__sort_list has a list of hpp formats to sort entries and the perf_hpp__list has a list of hpp formats to print output result. To have a backward compatibility, it automatically adds 'overhead' field in front of sort list. And then all of fields in sort list added to the output list (if it's not already there). Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Acked-by: NIngo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/n/tip-7g3h86woz2sckg3h1lj42ygj@git.kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>
-
- 28 4月, 2014 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
Moving towards sharing map groups within a process threads. Because of this we need the map groups to be dynamically allocated. No other functional change is intended in here. Based on a patch by Jiri Olsa, but this time _just_ making the conversion from statically allocating thread->mg to turning it into a pointer and instead of initializing it at thread's constructor, introduce a constructor/destructor for the map_groups class and call at thread creation time. Later we will introduce the get/put methods when we move to sharing those map_groups, when the get/put refcounting semantics will be needed. Signed-off-by: NArnaldo Carvalho de Melo <acme@kernel.org> Acked-by: NNamhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1397490723-1992-3-git-send-email-jolsa@redhat.comSigned-off-by: NJiri Olsa <jolsa@kernel.org>
-
- 15 3月, 2014 2 次提交
-
-
由 Namhyung Kim 提交于
Those functions need evsel to investigate event group and it's passed via hpp->ptr. However as it can be missed easily so it's better to pass it via an argument IMHO. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1394437440-11609-2-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
Instead of the pointer to buffer and its size so that it can also get private argument passed along with hpp. This is a preparation of further change. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1393809254-4480-4-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 28 12月, 2013 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
Several areas already used this technique, so do some audit to consistently use it elsewhere. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-9sbere0kkplwe45ak6rk4a1f@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 06 11月, 2013 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
They convey no information, perhaps I was bitten by some snake at some point, complete the detox by naming the last of those arguments more sensibly. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-u1r0dnjoro08dgztiy2g3t2q@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 29 10月, 2013 1 次提交
-
-
由 Jiri Olsa 提交于
Following commit tightened up the buffer size for output to strict width of used format columns: 99cf666c perf hists: Fix formatting of long symbol names This works fine until you hit color overhead output which places extra bytes into output buffer. We need to account for color overhead in the output buffer. Adding maximum color byte size to the output buffer size. Signed-off-by: NJiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1382700293-1803-1-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 06 9月, 2013 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
We had a hardcoded buffer for formatting histogram entries, truncating long symbol names (C++ anyone?). Fix it by using hists__sort_list_width() before formatting the first histogram entry to calculate the max lenght needed by traversing the overheads and columns lists (sort order). Reported-by: NStephane Eranian <eranian@google.com> Tested-by: NStephane Eranian <eranian@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-vdfkkyfdp8rboh7j9344o3ss@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 13 7月, 2013 2 次提交
-
-
由 Jiri Olsa 提交于
Moving hist_entry__period_snprintf function into stdio code and making it static, as it's no longer used anywhere else. Signed-off-by: NJiri Olsa <jolsa@redhat.com> Reviewed-by: NNamhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-ah8ms343h8xygt20iqz91kz4@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Adding 'struct perf_hpp_fmt' into hpp callbacks, so commands can access their private data. It'll be handy for diff command in future to be able to access file related data for each column. Signed-off-by: NJiri Olsa <jolsa@redhat.com> Reviewed-by: NNamhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-7vy2m18574b1bicoljn8e9lw@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 28 5月, 2013 1 次提交
-
-
由 Namhyung Kim 提交于
The --percent-limit option is for not showing small overhead entries in the output. Maybe we want to set a certain default value like 0.1. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Acked-by: NPekka Enberg <penberg@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1368497347-9628-7-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 01 2月, 2013 1 次提交
-
-
由 Namhyung Kim 提交于
Show group member's overhead also when showing the leader's if event group is enabled. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1358845787-1350-10-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 25 1月, 2013 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
As this function deals exclusively with hists->stats. Preparatory patch for removing the by now needless session->hists, that should be just session->stats. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-be0o8si9f1z40cwoa534f7me@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 09 12月, 2012 1 次提交
-
-
由 Jiri Olsa 提交于
Adding perf_hpp__list list to register and contain all period related columns the command is interested in. This way we get rid of static array holding all possible columns and enable commands to register their own columns. It'll be handy for diff command in future to process and display data for multiple files. Signed-off-by: NJiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/n/tip-kiykge4igrcl7etmpmveto1h@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 06 10月, 2012 1 次提交
-
-
由 Jiri Olsa 提交于
Adding -F option to display the formula for specified computation. This is mainly to facilitate debugging, but can be useful anyway. Signed-off-by: NJiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1349448287-18919-7-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 05 10月, 2012 5 次提交
-
-
由 Namhyung Kim 提交于
The struct he_stat is for separating out statistics data of a hist entry. It is required for later changes. It's just a mechanical change and should have no functional differences. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Cc: Arun Sharma <asharma@fb.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1349354994-17853-8-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
The total_period is available in struct hists data via the 'struct hist_entry::hists' pointer. There's no need to carry it through the output code path. Removing 'struct perf_hpp::total_period' pointer, because it's no longer needed. Signed-off-by: NJiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1349354994-17853-7-git-send-email-namhyung@kernel.orgSigned-off-by: NNamhyung Kim <namhyung@kernel.org> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
The hists pointer is now part of the 'struct hist_entry'. And since the overhead and baseline columns are split now, there's no reason to pass it through the output path. Signed-off-by: NJiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1349354994-17853-5-git-send-email-namhyung@kernel.orgSigned-off-by: NNamhyung Kim <namhyung@kernel.org> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Currently the overhead and baseline columns are handled within single function and the distinction is made by 'baseline hists' pointer passed by 'struct perf_hpp::ptr'. Since hists pointer is now part of each hist_entry, it's possible to locate paired hists pointer directly from the passed struct hist_entry pointer. Also separating those 2 columns makes the code more obvious. Signed-off-by: NJiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1349354994-17853-4-git-send-email-namhyung@kernel.orgSigned-off-by: NNamhyung Kim <namhyung@kernel.org> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Moving the position calculation into the diff command, so the position as prepared inside struct hist_entry data and there's no need to compute in the output display path. Removing 'displacement' from struct perf_hpp as it is no longer needed. Signed-off-by: NJiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1349354994-17853-3-git-send-email-namhyung@kernel.orgSigned-off-by: NNamhyung Kim <namhyung@kernel.org> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 09 9月, 2012 2 次提交
-
-
由 Namhyung Kim 提交于
When a field separator is given, the output format doesn't need to be fancy like aligning to column length, coloring the percent value and so on. And since there's a slight difference to normal format, fix it not to break backward compatibility. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1346640790-17197-3-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
Current hist print functions are messy because it has to consider many of command line options and the code doing that is scattered around to places. So when someone wants to add an option to manipulate the hist output it'd very easy to miss to update all of them in sync. And things getting worse as more options/features are added continuously. So I'd like to refactor them using hpp formats and move common code to ui/hist.c in order to make it easy to maintain and to add new features. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1346640790-17197-2-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 20 8月, 2012 1 次提交
-
-
由 Namhyung Kim 提交于
Rename functions for consistency and move callchain print function into hist_entry__fprintf(). Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1345438331-20234-3-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-