__i915_gem_request_started() asserts that the seqno is valid, but
i915_spin_request() was not checking before querying whether the request
had started.
Reported-by: NMichał Winiarski <michal.winiarski@intel.com>
Fixes: 754c9fd5 ("drm/i915: Protect the request->global_seqno with the engine->timeline lock")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308142238.22994-1-chris@chris-wilson.co.ukReviewed-by: NMichał Winiarski <michal.winiarski@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

i915_gem_object_is_dead() was a temporary lockdep aide whilst
transitioning to a new locking structure for obj->mm. Since commit
1233e2db ("drm/i915: Move object backing storage manipulation to its
own locking") it is now unused and should be removed.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308132629.7987-2-chris@chris-wilson.co.uk

We have to avoid taking ww_mutex inside the shrinker as we use it as a
plain mutex type and so need to avoid recursive deadlocks:

[  602.771969] =================================
[  602.771970] [ INFO: inconsistent lock state ]
[  602.771973] 4.10.0gpudebug+ #122 Not tainted
[  602.771974] ---------------------------------
[  602.771975] inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage.
[  602.771978] kswapd0/40 [HC0[0]:SC0[0]:HE1:SE1] takes:
[  602.771979]  (reservation_ww_class_mutex){+.+.?.}, at: [<ffffffffa054680a>] i915_gem_object_wait+0x39a/0x410 [i915]
[  602.772020] {RECLAIM_FS-ON-W} state was registered at:
[  602.772024]   mark_held_locks+0x76/0x90
[  602.772026]   lockdep_trace_alloc+0xb8/0xc0
[  602.772028]   __kmalloc_track_caller+0x5d/0x130
[  602.772031]   krealloc+0x89/0xb0
[  602.772033]   reservation_object_reserve_shared+0xaf/0xd0
[  602.772055]   i915_gem_do_execbuffer.isra.35+0x1413/0x18b0 [i915]
[  602.772075]   i915_gem_execbuffer2+0x10e/0x1d0 [i915]
[  602.772078]   drm_ioctl+0x291/0x480
[  602.772079]   do_vfs_ioctl+0x695/0x6f0
[  602.772081]   SyS_ioctl+0x3c/0x70
[  602.772084]   entry_SYSCALL_64_fastpath+0x18/0xad
[  602.772085] irq event stamp: 5197423
[  602.772088] hardirqs last  enabled at (5197423): [<ffffffff8116751d>] kfree+0xdd/0x170
[  602.772091] hardirqs last disabled at (5197422): [<ffffffff811674f9>] kfree+0xb9/0x170
[  602.772095] softirqs last  enabled at (5190992): [<ffffffff8107bfe1>] __do_softirq+0x221/0x280
[  602.772097] softirqs last disabled at (5190575): [<ffffffff8107c294>] irq_exit+0x64/0xc0
[  602.772099]
               other info that might help us debug this:
[  602.772100]  Possible unsafe locking scenario:

[  602.772101]        CPU0
[  602.772101]        ----
[  602.772102]   lock(reservation_ww_class_mutex);
[  602.772104]   <Interrupt>
[  602.772105]     lock(reservation_ww_class_mutex);
[  602.772107]
                *** DEADLOCK ***

[  602.772109] 2 locks held by kswapd0/40:
[  602.772110]  #0:  (shrinker_rwsem){++++..}, at: [<ffffffff811337b5>] shrink_slab.constprop.62+0x35/0x280
[  602.772116]  #1:  (&dev->struct_mutex){+.+.+.}, at: [<ffffffffa0553957>] i915_gem_shrinker_lock+0x27/0x60 [i915]
[  602.772141]
               stack backtrace:
[  602.772144] CPU: 2 PID: 40 Comm: kswapd0 Not tainted 4.10.0gpudebug+ #122
[  602.772145] Hardware name: LENOVO 42433ZG/42433ZG, BIOS 8AET64WW (1.44 ) 07/26/2013
[  602.772147] Call Trace:
[  602.772151]  dump_stack+0x68/0xa1
[  602.772153]  print_usage_bug+0x1d4/0x1f0
[  602.772155]  mark_lock+0x390/0x530
[  602.772157]  ? print_irq_inversion_bug+0x200/0x200
[  602.772159]  __lock_acquire+0x405/0x1260
[  602.772181]  ? i915_gem_object_wait+0x39a/0x410 [i915]
[  602.772183]  lock_acquire+0x60/0x80
[  602.772205]  ? i915_gem_object_wait+0x39a/0x410 [i915]
[  602.772207]  mutex_lock_nested+0x69/0x760
[  602.772229]  ? i915_gem_object_wait+0x39a/0x410 [i915]
[  602.772231]  ? kfree+0xdd/0x170
[  602.772253]  ? i915_gem_object_wait+0x163/0x410 [i915]
[  602.772255]  ? trace_hardirqs_on_caller+0x18d/0x1c0
[  602.772256]  ? trace_hardirqs_on+0xd/0x10
[  602.772278]  i915_gem_object_wait+0x39a/0x410 [i915]
[  602.772300]  i915_gem_object_unbind+0x5e/0x130 [i915]
[  602.772323]  i915_gem_shrink+0x22d/0x3d0 [i915]
[  602.772347]  i915_gem_shrinker_scan+0x3f/0x80 [i915]
[  602.772349]  shrink_slab.constprop.62+0x1ad/0x280
[  602.772352]  shrink_node+0x52/0x80
[  602.772355]  kswapd+0x427/0x5c0
[  602.772358]  kthread+0x122/0x130
[  602.772360]  ? try_to_free_pages+0x270/0x270
[  602.772362]  ? kthread_stop+0x70/0x70
[  602.772365]  ret_from_fork+0x2e/0x40

v2: Add commentary about the pruning being opportunistic
Reported-by: NJan Nordholz <jckn@gmx.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99977#c10
Fixes: e54ca977 ("drm/i915: Remove completed fences after a wait")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308132629.7987-1-chris@chris-wilson.co.uk

DRM_UT_CORE generates way too much noise usually, so having the
framebuffer init failures use DRM_UT_CORE is a pain when trying to
find out the reason why you failed in creating a framebuffer.
Let's use DRM_UT_KMS for these debug messages instead.

v2: s/at less than/at most/ in the debug message (Imre)
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170307194210.13400-6-ville.syrjala@linux.intel.com

intel_fill_fb_info() should pass the correct plane index to
_intel_compute_tile_offset() once we start to care about the AUX
surface.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170307194210.13400-5-ville.syrjala@linux.intel.com

To make life easier let's allow skl_plane_stride() to be called for the
AUX surface even when there is no AUX surface. Avoids special cases in
the callers.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170307194210.13400-4-ville.syrjala@linux.intel.com

Let's try to keep the alignment requirements in one place, and so
towards that end let's move the AUX_DIST alignment handling into
intel_surf_alignment() alongside the main surface alignment stuff.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170307194210.13400-3-ville.syrjala@linux.intel.com

Now that framebuffers can be used even before calling
drm_framebuffer_init() we can start to plumb them into more places,
instead of passing individual pieces for fb metadata.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170307194210.13400-2-ville.syrjala@linux.intel.com

under virtualization enviroment, it is possible guest update pipe
registers across vblank intervals due to overhead of mmio traps or vm
schedule out. However, it is safe since those pipe update happen in
virual registers and will not be committed to hardware. suppress that
atomic commit error message under virtualization case to avoid
confusing user.

v2: per ville's comment: return early and against Maarten's patch
v3: coding style clean
Signed-off-by: NBing Niu <bing.niu@intel.com>
Acked-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489004043-15449-1-git-send-email-bing.niu@intel.comSigned-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

printks are slow so we should not be doing them from the vblank evade
critical section. These could explain why we sometimes seem to
blow past our 100 usec deadline.

The problem has been there ever since commit bfd16b2a ("drm/i915:
Make updating pipe without modeset atomic.") but it may not have
been readily visible until commit e1edbd44 ("drm/i915: Complain
if we take too long under vblank evasion.") increased our chances
of noticing it.

Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: bfd16b2a ("drm/i915: Make updating pipe without modeset atomic.")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170307205419.19447-1-ville.syrjala@linux.intel.comReviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>

Backmerge drm-next to get at all the good stuff in drm-misc. We need
that because:

- drm_connector_list_iter conversion for i915 needs the core patches.
- Maarten's patches to use the new atomic state iterators also need
  the core patches.
- We need the new link status property to complete the DP retraining
  work, merging through 2 branches wasn't a good idea and we had to
  partially backtrack.
- Chris needs reservation_object_trylock and we want to roll out
  kref_read everywhere.
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

- Re-architecture of the code to handle proprietary fw, more abstracted
to support the multitude of differences that NVIDIA introduce
- Support in the said code for GP10x ACR and GR fw, giving acceleration
support \o/
- Fix for GTX 970 GPUs that are in an odd MMU configuration

* 'linux-4.12' of git://github.com/skeggsb/linux: (60 commits)
  drm/nouveau/fb/gf100-: rework ram detection
  drm/nouveau/fb/gm200: split ram implementation from gm107
  drm/nouveau/fb/gf108: split implementation from gf100
  drm/nouveau/fb/gf100-: modify constructors to allow more customisation
  drm/nouveau/kms/nv50: use drm core i2c-over-aux algorithm
  drm/nouveau/i2c/g94-: return REPLY_M value on reads
  drm/nouveau/i2c: modify aux interface to return length actually transferred
  drm/nouveau/gp10x: enable secboot and GR
  drm/nouveau/gr/gp102: initial support
  drm/nouveau/falcon: support for gp10x msgqueue
  drm/nouveau/secboot: add gp102/gp104/gp106/gp107 support
  drm/nouveau/secboot: put HS code loading code into own file
  drm/nouveau/secboot: support for r375 ACR
  drm/nouveau/secboot: support for r367 ACR
  drm/nouveau/secboot: support for r364 ACR
  drm/nouveau/secboot: workaround bug when starting SEC2 firmware
  drm/nouveau/secboot: support standard NVIDIA HS binaries
  drm/nouveau/secboot: support for unload blob bootloader
  drm/nouveau/secboot: let callers interpret return value of blobs
  drm/nouveau/secboot: support for different load and unload falcons
  ...

4 weeks worth of stuff since I was traveling&lazy:

- lspcon improvements (Imre)
- proper atomic state for cdclk handling (Ville)
- gpu reset improvements (Chris)
- lots and lots of polish around fences, requests, waiting and
  everything related all over (both gem and modeset code), from Chris
- atomic by default on gen5+ minus byt/bsw (Maarten did the patch to
  flip the default, really this is a massive joint team effort)
- moar power domains, now 64bit (Ander)
- big pile of in-kernel unit tests for various gem subsystems (Chris),
  including simple mock objects for i915 device and and the ggtt
  manager.
- i915_gpu_info in debugfs, for taking a snapshot of the current gpu
  state. Same thing as i915_error_state, but useful if the kernel didn't
  notice something is stick. From Chris.
- bxt dsi fixes (Umar Shankar)
- bxt w/a updates (Jani)
- no more struct_mutex for gem object unreference (Chris)
- some execlist refactoring (Tvrtko)
- color manager support for glk (Ander)
- improve the power-well sync code to better take over from the
  firmware (Imre)
- gem tracepoint polish (Tvrtko)
- lots of glk fixes all around (Ander)
- ctx switch improvements (Chris)
- glk dsi support&fixes (Deepak M)
- dsi fixes for vlv and clanups, lots of them (Hans de Goede)
- switch to i915.ko types in lots of our internal modeset code (Ander)
- byt/bsw atomic wm update code, yay (Ville)

* tag 'drm-intel-next-2017-03-06' of git://anongit.freedesktop.org/git/drm-intel: (432 commits)
  drm/i915: Update DRIVER_DATE to 20170306
  drm/i915: Don't use enums for hardware engine id
  drm/i915: Split breadcrumbs spinlock into two
  drm/i915: Refactor wakeup of the next breadcrumb waiter
  drm/i915: Take reference for signaling the request from hardirq
  drm/i915: Add FIFO underrun tracepoints
  drm/i915: Add cxsr toggle tracepoint
  drm/i915: Add VLV/CHV watermark/FIFO programming tracepoints
  drm/i915: Add plane update/disable tracepoints
  drm/i915: Kill level 0 wm hack for VLV/CHV
  drm/i915: Workaround VLV/CHV sprite1->sprite0 enable underrun
  drm/i915: Sanitize VLV/CHV watermarks properly
  drm/i915: Only use update_wm_{pre,post} for pre-ilk platforms
  drm/i915: Nuke crtc->wm.cxsr_allowed
  drm/i915: Compute proper intermediate wms for vlv/cvh
  drm/i915: Skip useless watermark/FIFO related work on VLV/CHV when not needed
  drm/i915: Compute vlv/chv wms the atomic way
  drm/i915: Compute VLV/CHV FIFO sizes based on the PM2 watermarks
  drm/i915: Plop vlv/chv fifo sizes into crtc state
  drm/i915: Plop vlv wm state into crtc_state
  ...

Before we instantiate/pin the backing store for our use, we
can prepopulate the shmemfs filp efficiently using a write into the
pagecache. We avoid the penalty of instantiating all the pages, important
if the user is just writing to a few and never uses the object on the GPU,
and using a direct write into shmemfs allows it to avoid the cost of
retrieving a page (mostly the clear-before-use, but in theory we could
curtail swapin) before it is overwritten.

This can be extended later to provide additional specialisation for
other backends (other than shmemfs). For now it provides a defense
against very large write-only allocations from exhausting all of system
memory.

v2: Smelling fixes.

Fixes: fe115628 ("drm/i915: Implement pwrite without struct-mutex")
References: https://bugs.freedesktop.org/show_bug.cgi?id=99107Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.10+
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170307120338.7277-2-chris@chris-wilson.co.uk

Once the object has been truncated, it is unrecoverable. To facilitate
detection of this state store the error in obj->mm.pages.

This is required for the next patch which should be applied to v4.10
(via stable), so we also need to mark this patch for backporting. In
that regard, let's consider this to be a fix/improvement too.

v2: Avoid dereferencing the ERR_PTR when freeing the object.

Fixes: 1233e2db ("drm/i915: Move object backing storage manipulation to its own locking")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.10+
Link: http://patchwork.freedesktop.org/patch/msgid/20170307132031.32461-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Move the {skl,bxt}_{i,uni}nit_cdclk declarations to the place where
the intel_cdclk.c functions are declared since these functions have
moved there.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487712207-17181-1-git-send-email-paulo.r.zanoni@intel.com

The IS_G4X macro is defined as IS_G45 || IS_GM45. We have two points
in our code where we have an if statement checking for GM45 followed
by an else if statement checking for IS_G4X. This can be confusing
since the IS_G4X check won't be catching the previously-checked GM45.
Someone quickly trying to check which functions run on each platform
may end up getting confused while reading the code.

Fix the potential confusion by limiting the else if statements to only
check for the platform that was not already checked earlier in the if
ladder.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487620842-22893-3-git-send-email-paulo.r.zanoni@intel.com

In order for the missed-irq update to take effect, the device must be
idle. So when the user updates the fault injection via debugfs, idle the
device.

v2: Idle is explicitly required for setting test_irq, and good behaviour
for clearing the missed_irq.
v3: Use matching types; expanding to more than ulong rings is left as an
exercise to the reader.

Testcase: igt/drv_missed_irq
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170307155908.14576-1-chris@chris-wilson.co.uk

No functional changes.
Reviewed-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NBob Paauwe <bob.j.paauwe@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/fadc3b0de70d2c7db7a6ecbe7121328483330f04.1488810382.git.jani.nikula@intel.com

Emphasize that the VBT file is nowadays more about initializing and
running stuff based on the VBT contents, not so much about being a
"panel driver". No functional changes.
Reviewed-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NBob Paauwe <bob.j.paauwe@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/b13cb012a555ff5eb56b5e4bb2b0205c3e025a99.1488810382.git.jani.nikula@intel.com

The hook names reflect more the phase in the mode set sequence the hooks
are called in than what they actually do in terms of the specific
encoder. Stick to that scheme, and rename intel_dsi_pre_disable to
intel_dsi_disable. Unify the comments around this while at it. No
functional changes.

v2: Add more sense in the enable/disable hook comments (Ville)
Reviewed-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NBob Paauwe <bob.j.paauwe@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488878659-10386-1-git-send-email-jani.nikula@intel.com

Use the prefix intel_dsi_vbt for all the DSI VBT functions. No
functional changes.
Reviewed-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NBob Paauwe <bob.j.paauwe@intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/0a05abca364f3bc7f9caf90c9bd3a68eef5f222f.1488810382.git.jani.nikula@intel.com

Now that we've stopped using the drm_panel hooks, there aren't any
benefits left with using the drm_panel framework. Remove the rest of the
drm_panel use. No functional changes.
Reviewed-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NBob Paauwe <bob.j.paauwe@intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/6602e36641451952065092401bd6e6cfbe93e208.1488810382.git.jani.nikula@intel.com

Commit 18a00095 ("drm/i915/dsi: Make intel_dsi_enable/disable
directly exec VBT sequences") started calling the VBT sequence functions
directly instead of using the drm_panel hooks. Remove the last drm_panel
hook by calling vbt_panel_get_modes() directly. No functional changes.
Reviewed-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NBob Paauwe <bob.j.paauwe@intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/63d0d41f29583507f5968b42b5f52e6574a1f245.1488810382.git.jani.nikula@intel.com

Fact is, there are no other panel drivers except the VBT based
one. Simplify the code and maintenance. No functional changes.
Reviewed-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NBob Paauwe <bob.j.paauwe@intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/7dfd041dd25e8e930150ede09589bb232f6248d5.1488810382.git.jani.nikula@intel.com

To prevent having to preserve the drm_crtc_state as we clear the
intel_crtc_state, only memset our extended state.

Fixes:
drivers/gpu/drm/i915/intel_display.c: In function ‘clear_intel_crtc_state’:
drivers/gpu/drm/i915/intel_display.c:11301:1: error: the frame size of 1056 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]

v2: Add a comment and BUILD_BUG_ON to explain the memset()
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170303154644.6709-1-chris@chris-wilson.co.ukReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

There is a nre version of DMC available for GLK.

The release notes mentions:
This FW has the fix to remove the hang conditions due to
some debug related issues.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487793336-31857-1-git-send-email-anusha.srivatsa@intel.com

It is called from either the process or timer context so it is
correct to always disable interrupts.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170306150321.29024-1-tvrtko.ursulin@linux.intel.com

Timer callback is a known context so it is correct to always
disable interrupts.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

It is always called from thread context.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

This commit reworks the RAM detection algorithm, using RAM-per-LTC to
determine whether a board has a mixed-memory configuration instead of
using RAM-per-FBPA.  I'm not certain the algorithm is perfect, but it
should handle all currently known configurations in the very least.

This should fix GTX 970 boards with 4GiB of RAM where the last 512MiB
isn't fully accessible, as well as only detecting half the VRAM on
GF108 boards.

As a nice side-effect, GP10x memory detection now reuses the majority
of the code from earlier chipsets.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

GF108/GM107 implementations will want slightly different functions for
the upcoming RAM detection improvements.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

I'm not entirely sure NVKM needs to support this now, but I haven't
removed it as of yet just in case it's needed from DEVINIT scripts
where DRM isn't available.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This value represents the actual number of bytes recieved on the AUX
channel as the result of a read transaction.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Apparently sinks are allows to respond with ACK even if they didn't
fully complete a transaction...  It seems like a missed opportunity
for DEFER to me, but what do I know :)
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

All the bricks are in place for secure boot to be enabled. This in turn
makes GR usable so enable them all.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Differences from GP100:
- 3 PPCs/GPC.
- Another random reg to calculate/write.
- Attrib CB setup a little different.
- PascalB
- PascalComputeB
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Add support for the msgqueue firmware used to process SEC2 commands
for gp10x chips.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>