Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

same story, different registers...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

broken use of bitfields; FUBAR on big-endian (and not valid C,
strictly speaking).
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

wn3_config is shared by these cards; the way we deal with it is both bad C
(union abuse) and broken on big-endian.  For 3c515 it's less serious (ISA
cards are quite rare outside of little-endian boxen), but 3c574 is a pcmcia
one and that'd better be endian-independent...  Fix is the same in both
cases.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

- Fixed synchronization between scheduling of napi with card reset and close
  by moving the enabling and disabling of napi to card up and card down
  functions respectively instead of open and close.
Signed-off-by: NSurjit Reang <surjit.reang@neterion.com>
Signed-off-by: NRamkrishna Vepa <ram.vepa@neterion.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The driver sets up the hardware to accept a frame with max length
equal to MTU + Ethernet header + FCS + VLAN tag, but we neglect to
add the VLAN tag size to the ingress buffer.  When a VLAN-tagged
frame arrives, the hardware passes it, but bad things happen
because the buffer is too small.  This patch fixes that.

Thanks to David Harris for reporting the bug and testing the fix.
Tested-by: NDavid Harris <david.harris@cpni-inc.com>
Signed-off-by: NJay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Add a guideline not to modify SKBs.
Signed-off-by: NMatti Linnanvuori <mattilinnanvuori@yahoo.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This reverts commit 84cd2dfb.

Some BIOS's break if Wake On Lan is enabled, and the machine
can't boot. Better to have some user's have to call ethtool to
enable WOL than to break a single user's boot.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Merge branch 'fixes-jgarzik' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes

There is no Documentation/networking/e1000e.txt.
Signed-off-by: NJason Uhlenkott <jasonuhl@jasonuhl.org>
Cc: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Merge branch 'ipg-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/romieu/netdev-2.6 into upstream-fixes

Change bond_mii_monitor to not hold any locks when calling rtnl_unlock,
as rtnl_unlock can sleep (when acquring another mutex in netdev_run_todo).

Bug reported by Makito SHIOKAWA <mshiokawa@miraclelinux.com>, who
included a different patch.
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Fix the handling of rtnl and the bonding_rwsem to always be acquired
in a consistent order (rtnl, then bonding_rwsem).

The existing code sometimes acquired them in this order, and sometimes
in the opposite order, which opens a window for deadlock between ifenslave
and sysfs.
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

	A recent change to add an additional hash policy modified
bond_parse_parm, but it now does not correctly match parameters passed in
via sysfs.

	Rewrote bond_parse_parm to handle (a) parameter matches that
are substrings of one another and (b) user input with whitespace (e.g.,
sysfs input often has a trailing newline).
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

	Add a call to bond_release_all in the bonding netdev event
handler for the master.  This releases the slaves for the case of, e.g.,
"echo -bond0 > /sys/class/net/bonding_masters", which otherwise will spin
forever waiting for references to be released.
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

	alb_fasten_mac_swap (actually rlb_teach_disabled_mac_on_primary)
requries RTNL and no other locks.  This could cause dev_set_promiscuity
and/or dev_set_mac_address to be called with improper locking.

	Changed callers to hold only RTNL during calls to alb_fasten_mac_swap
or functions calling it.  Updated header comments in affected functions to
reflect proper reality of locking requirements.
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

	Move an ASSERT_RTNL down to where we should hold only RTNL;
the existing check produces spurious warnings because we hold additional
locks at _bh, tripping a debug warning in spin_lock_mutex().
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

	Fix the functions that store the primary and active slave
options via sysfs to hold the correct locks in the correct order.

	The bond_change_active_slave and bond_select_active_slave
functions both require rtnl, bond->lock for read and curr_slave_lock for
write_bh, and no other locks.  This is so that the lower level
mode-specific functions (notably for balance-alb mode) can release locks
down to just rtnl in order to call, e.g., dev_set_mac_address with the
locks it expects (rtnl only).
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NAndy Gospodarek <andy@greyhouse.net>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ALPS - fix sync loss on Acer Aspire 5720ZG
  Input: psmouse - fix input_dev leak in lifebook driver
  Input: psmouse - fix potential memory leak in psmouse_connect()
  Input: usbtouchscreen - fix buffer overflow, make more egalax work
  Input: mousedev - handle mice that use absolute coordinates

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  [NIU]: Fix 1G PHY link state handling.
  [NET]: Fix TX timeout regression in Intel drivers.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Fix hypervisor TLB operation error reporting.

Correct wrong sized spinlock flags, form int to unsigned long.
Signed-off-by: NDaniel Walker <dwalker@mvista.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

call_usermodehelper_exec() has an exit path that can leave the
helper_lock() call at the top of the routine unbalanced.  The attached
patch fixes this issue.
Signed-off-by: NNigel Cunningham <nigel@tuxonice.net>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit e1265205.

It's a duplicate commit of commit 74beb9db,
resulting in a duplicate section.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix http://bugzilla.kernel.org/show_bug.cgi?id=9762

Framebuffer is ok only with default parameters only (it is 1280x800-8@60).  If
parameters are video=radeonfb:1280x800-32@60 then xres, yres and xres_virtual
are ok but yres_virtual is 1024.  It can be corrected by fbset utility so I
think it can be corrected in the driver code also.

Steps to reproduce: video=radeonfb:1280x800-32@60 or
video=radeonfb:1280x800-16@60

Add 1280x800 mode into modedb

Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch puts #ifdef CONFIG_DEBUG_VM around a check in vm_normal_page
that verifies that a pfn is valid.  This patch increases performance of the
page fault microbenchmark in lmbench by 13% and overall dbench performance
by 7% on s390x.  pfn_valid() is an expensive operation on s390 that needs a
high double digit amount of CPU cycles.  Nick Piggin suggested that
pfn_valid() involves an array lookup on systems with sparsemem, and
therefore is an expensive operation there too.

The check looks like a clear debug thing to me, it should never trigger on
regular kernels.  And if a pte is created for an invalid pfn, we'll find
out once the memory gets accessed later on anyway.  Please consider
inclusion of this patch into mm.
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Acked-by: NNick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The trap handler does properly update the fraction,
but not the exponent...

Thanks to Paolo Bonzini for the bug report and the testcase.
Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Paolo Bonzini <bonzini@gnu.org>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This likely fixes the oops in __lock_acquire reported as:

http://www.kerneloops.org/raw.php?rawid=2753&msgid=
http://www.kerneloops.org/raw.php?rawid=2749&msgid=

In these reported oopses, start_this_handle is returning -EROFS.
Signed-off-by: NJonas Bonn <jonas.bonn@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With CONFIG_HOTPLUG=n and CONFIG_HOTPLUG_CPU=y we saw
following warning:
WARNING: mm/built-in.o(.text+0x6864): Section mismatch: reference to .init.text: (between 'process_zones' and 'pageset_cpuup_callback')

The culprit was zone_batchsize() which were annotated __devinit but used
from process_zones() which is annotated __cpuinit.  zone_batchsize() are
used from another function annotated __meminit so the only valid option is
to drop the annotation of zone_batchsize() so we know it is always valid to
use it.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- Move alignment to page size of init data outside ifdef for BLK_DEV_INITRD.
  The reservation up to page size of memory after init data was previously
  not done if BLK_DEV_INITRD was undefined.
  This caused a kernel oops when init memory pages were freed after startup,
  data placed in the same page as the last init memory would also be freed
  and reused, with disastrous results.

- Use macros for initcalls and .text sections.

- Replace hardcoded page size constant with PAGE_SIZE define.

- Change include/asm-cris/page.h to use the _AC macro to instead
  of testing __ASSEMBLY__.
Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Mikael Starvik <mikael.starvik@axis.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Wups, previous patch was ineffective in 2 cases.

http://bugzilla.kernel.org/show_bug.cgi?id=9535Signed-off-by: NLen Brown <len.brown@intel.com>
Reported-by: N"Hartkopp, Oliver (K-EFE/E)" <oliver.hartkopp@volkswagen.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix potential null deref introduced by commit
cf059462
http://bugzilla.kernel.org/show_bug.cgi?id=9748Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Reported-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When the cpufreq driver starts up at boot time, it calls into the default
governor which might not be initialised yet.  This hurts when the
governor's worker function relies on memory that is not yet set up by its
init function.

This migrates all governors from module_init() to fs_initcall() when being
the default, as was already done in cpufreq_performance when it was the
only possible choice.  The performance governor is always initialized early
because it might be used as fallback even when not being the default.

Fixes at least one actual oops where ondemand is the default governor and
cpufreq_governor_dbs() uses the uninitialised kondemand_wq work-queue
during boot-time.
Signed-off-by: NJohannes Weiner <hannes@saeurebad.de>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The current logic will only request an ack for the first pending
packet. No irq is triggered as soon as the CPU submits a few
packets a bit quickly.  Let's request an irq for every packet
instead.
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>

Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>

The Tx skb release could not free more than one skb per call.
Add it to the fact that the xmit handler does not check for
a queue full condition and you have a recipe to leak quickly.

Let's release every pending Tx descriptor which has been given
back to the host CPU by the network controller. The xmit handler
suggests that it is done through the IPG_TFC_TFDDONE bit.

Remove the former "curr" computing: it does not produce anything
usable in its current form.
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>