rtsx_pcr:
add callback functions to support runtime PM
add delay_work to put device to D3 after idle
over 10 sec

rts5249:
add extra init flow for rtd3 and set rtd3_en from
config setting

rtsx_pci_sdmmc:
child device support autosuspend
Signed-off-by: NRicky Wu <ricky_wu@realtek.com>
Link: https://lore.kernel.org/r/20201202065857.19412-1-ricky_wu@realtek.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

changed rtsx_pci_disable_aspm() to rtsx_disable_aspm()
do not access ASPM configuration directly

changed pcie_capability_write_word() to _clear_and_set_word()
make sure only change PCI_EXP_LNKCTL bit8

make sure ASPM disable after extra_init_hw()
Signed-off-by: NRicky Wu <ricky_wu@realtek.com>
Link: https://lore.kernel.org/r/20201202063228.18319-1-ricky_wu@realtek.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

enable/disable device ASPM function:
changed write ASPM configuration directly to use write register
Signed-off-by: NRicky Wu <ricky_wu@realtek.com>
Link: https://lore.kernel.org/r/20201202063124.18262-1-ricky_wu@realtek.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

A kernel-infoleak was reported by syzbot, which was caused because
dbells was left uninitialized.
Using kzalloc() instead of kmalloc() fixes this issue.

Reported-by: syzbot+a79e17c39564bedf0930@syzkaller.appspotmail.com
Tested-by: syzbot+a79e17c39564bedf0930@syzkaller.appspotmail.com
Signed-off-by: NAnant Thazhemadam <anant.thazhemadam@gmail.com>
Link: https://lore.kernel.org/r/20201122224534.333471-1-anant.thazhemadam@gmail.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The usage of in_interrupt() in xpc_partition_disengaged() is clearly
intended to avoid canceling the timeout timer when the function is invoked
from the timer callback.

While in_interrupt() is deprecated and ill defined as it does not provide
what the name suggests it catches the intended case.

Add an argument to xpc_partition_disengaged() which is true if called
from timer and otherwise false.
Use del_timer_sync() instead of del_singleshot_timer_sync() which is the
same thing.

Note: This does not prevent reentrancy into the function as the function
has no concurrency control and timer callback and regular task context
callers can happen concurrently on different CPUs or the timer can
interrupt the task context before it is able to cancel it.

While the only driver which is providing the arch_xpc_ops callbacks
(xpc_uv) seems not to have a reentrancy problem and the only negative
effect would be a double dev_info() entry in dmesg, the whole mechanism is
conceptually broken.

But that's not subject of this cleanup endeavour and left as an exercise to
the folks who might have interest to make that code fully correct.

[bigeasy: Add the argument, use del_timer_sync().]

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Cliff Whickman <cpw@sgi.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <robinmholt@gmail.com>
Cc: Steve Wahl <steve.wahl@hpe.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Russ Anderson <russ.anderson@hpe.com>
Reviewed-by: NSteve Wahl <steve.wahl@hpe.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20201119103151.ppo45mj53ulbxjx4@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The operation of get/set mode was same with get/set resolution. It is
a typo absolutely. This patch updates these bits operated by get/set
mode.
Signed-off-by: NZhou Xingxing <zhou_x1@hoperun.com>
Link: https://lore.kernel.org/r/1607334545-2091-1-git-send-email-zhou_x1@hoperun.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

When building with KASAN and LKDTM, clang may implictly generate an
asan.module_ctor function in the LKDTM rodata object. The Makefile moves
the lkdtm_rodata_do_nothing() function into .rodata by renaming the
file's .text section to .rodata, and consequently also moves the ctor
function into .rodata, leading to a boot time crash (splat below) when
the ctor is invoked by do_ctors().

Let's prevent this by marking the function as noinstr rather than
notrace, and renaming the file's .noinstr.text to .rodata. Marking the
function as noinstr will prevent tracing and kprobes, and will inhibit
any undesireable compiler instrumentation.

The ctor function (if any) will be placed in .text and will work
correctly.

Example splat before this patch is applied:

[    0.916359] Unable to handle kernel execute from non-executable memory at virtual address ffffa0006b60f5ac
[    0.922088] Mem abort info:
[    0.922828]   ESR = 0x8600000e
[    0.923635]   EC = 0x21: IABT (current EL), IL = 32 bits
[    0.925036]   SET = 0, FnV = 0
[    0.925838]   EA = 0, S1PTW = 0
[    0.926714] swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000427b3000
[    0.928489] [ffffa0006b60f5ac] pgd=000000023ffff003, p4d=000000023ffff003, pud=000000023fffe003, pmd=0068000042000f01
[    0.931330] Internal error: Oops: 8600000e [#1] PREEMPT SMP
[    0.932806] Modules linked in:
[    0.933617] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.10.0-rc7 #2
[    0.935620] Hardware name: linux,dummy-virt (DT)
[    0.936924] pstate: 40400005 (nZcv daif +PAN -UAO -TCO BTYPE=--)
[    0.938609] pc : asan.module_ctor+0x0/0x14
[    0.939759] lr : do_basic_setup+0x4c/0x70
[    0.940889] sp : ffff27b600177e30
[    0.941815] x29: ffff27b600177e30 x28: 0000000000000000
[    0.943306] x27: 0000000000000000 x26: 0000000000000000
[    0.944803] x25: 0000000000000000 x24: 0000000000000000
[    0.946289] x23: 0000000000000001 x22: 0000000000000000
[    0.947777] x21: ffffa0006bf4a890 x20: ffffa0006befb6c0
[    0.949271] x19: ffffa0006bef9358 x18: 0000000000000068
[    0.950756] x17: fffffffffffffff8 x16: 0000000000000000
[    0.952246] x15: 0000000000000000 x14: 0000000000000000
[    0.953734] x13: 00000000838a16d5 x12: 0000000000000001
[    0.955223] x11: ffff94000da74041 x10: dfffa00000000000
[    0.956715] x9 : 0000000000000000 x8 : ffffa0006b60f5ac
[    0.958199] x7 : f9f9f9f9f9f9f9f9 x6 : 000000000000003f
[    0.959683] x5 : 0000000000000040 x4 : 0000000000000000
[    0.961178] x3 : ffffa0006bdc15a0 x2 : 0000000000000005
[    0.962662] x1 : 00000000000000f9 x0 : ffffa0006bef9350
[    0.964155] Call trace:
[    0.964844]  asan.module_ctor+0x0/0x14
[    0.965895]  kernel_init_freeable+0x158/0x198
[    0.967115]  kernel_init+0x14/0x19c
[    0.968104]  ret_from_fork+0x10/0x30
[    0.969110] Code: 00000003 00000000 00000000 00000000 (00000000)
[    0.970815] ---[ end trace b5339784e20d015c ]---

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kees Cook <keescook@chromium.org>
Acked-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20201207170533.10738-1-mark.rutland@arm.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a spelling mistake in the Kconfig help text. Fix it.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201204192250.1151316-1-colin.king@canonical.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a per-transaction flag to indicate that the buffer
must be cleared when the transaction is complete to
prevent copies of sensitive data from being preserved
in memory.
Signed-off-by: NTodd Kjos <tkjos@google.com>
Link: https://lore.kernel.org/r/20201120233743.3617529-1-tkjos@google.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The flush_lock is uninitialized, use DEFINE_SPINLOCK
to define and initialize flush_lock.

Fixes: c6e3fd22 ("Staging: add speakup to the staging directory")
Reported-by: NHulk Robot <hulkci@huawei.com>
Reviewed-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20201117012229.3395186-1-yangyingliang@huawei.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'phy-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next

Vinod writes:

phy-for-5.11

 - New phy drivers:
   - Mediatek MT7621 PCIe PHY (promoted from staging)
   - Ingenic USB phy driver supporting JZ4775 and X2000
   - Intel Keem Bay USB PHY driver
   - Marvell USB HSIC PHY driver supporting MMP3 SoC
   - AXG MIPI D-PHY driver

 - Updates:
   - Conversion to YAML binding for:
	- Broadcom SATA PHY
	- Cadence Sierra PHY bindings
	- STM32 USBC Phy
   - Support for Exynos5433 PCIe PHY
   - Support for Qualcomm SM8250 PCIe QMP PHY
   - Support for Exynos5420 USB2 phy
   - devm_platform_ioremap_resource conversion for bunch of drivers

* tag 'phy-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (72 commits)
  drm/mediatek: avoid dereferencing a null hdmi_phy on an error message
  phy: ingenic: depend on HAS_IOMEM
  phy: mediatek: statify mtk_hdmi_phy_driver
  dt-bindings: phy: Convert Broadcom SATA PHY to YAML
  devicetree: phy: rockchip-emmc add output-tapdelay-select
  phy: rockchip-emmc: output tap delay dt property
  PHY: Ingenic: Add USB PHY driver using generic PHY framework.
  dt-bindings: USB: Add bindings for Ingenic JZ4775 and X2000.
  USB: PHY: JZ4770: Remove unnecessary function calls.
  devicetree: phy: rockchip-emmc: pulldown property
  phy: rockchip: set pulldown for strobe line in dts
  phy: renesas: rcar-gen3-usb2: disable runtime pm in case of failure
  phy: mediatek: allow compile-testing the hdmi phy
  phy/rockchip: Make PHY_ROCKCHIP_INNO_HDMI depend on HAS_IOMEM to fix build error
  phy: samsung: Merge Kconfig for Exynos5420 and Exynos5250
  phy: ralink: phy-mt7621-pci: set correct name in MODULE_DEVICE_TABLE macro
  phy: ralink: phy-mt7621-pci: drop 'COMPILE_TEST' from Kconfig
  phy: mediatek: Make PHY_MTK_{XSPHY, TPHY} depend on HAS_IOMEM and OF_ADDRESS to fix build errors
  phy: tegra: xusb: Fix usb_phy device driver field
  phy: amlogic: replace devm_reset_control_array_get()
  ...

The ETM device can't keep up with the core pipeline when cpu core
is at full speed. This may cause overflow within core and its ETM.
This is a common phenomenon on ETM devices.

On HiSilicon Hip08 platform, a specific feature is added to set
core pipeline. So commit rate can be reduced manually to avoid ETM
overflow.
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NQi Liu <liuqi115@huawei.com>
[Modified changelog title and Kconfig description]
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20201208182651.1597945-4-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Functions that are annotated __exit are discarded for built-in drivers,
but the .remove callback in a device driver must still be kept around
to allow bind/unbind operations.

There is now a linker warning for the discarded symbol references:

`tmc_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-tmc-core.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-tmc-core.o
`tpiu_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-tpiu.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-tpiu.o
`etb_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-etb10.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-etb10.o
`static_funnel_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-funnel.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-funnel.o
`dynamic_funnel_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-funnel.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-funnel.o
`static_replicator_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-replicator.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-replicator.o
`dynamic_replicator_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-replicator.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-replicator.o
`catu_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-catu.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-catu.o

Remove all those annotations.

Fixes: 8b0cf826 ("coresight: stm: Allow to build coresight-stm as a module")
Reviewed-by: NStephen Boyd <swboyd@chromium.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20201208182651.1597945-3-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

When the ETR is used in perf mode with a larger buffer (configured
via sysfs or the default size of 1M) than the perf aux buffer size,
we end up inserting the barrier packet at the wrong offset, while
moving the offset forward. i.e, instead of the "new moved offset",
we insert it at the current hardware buffer offset. These packets
will not be visible as they are never copied and could lead to
corruption in the trace decoding side, as the decoder is not aware
that it needs to reset the decoding.

Fixes: ec13c78d ("coresight: tmc-etr: Add barrier packets when moving offset forward")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: stable@vger.kernel.org
Reported-by: NAl Grant <al.grant@arm.com>
Tested-by: NMike Leach <mike.leach@arm.com>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20201208182651.1597945-2-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently there is a null pointer check for hdmi_phy that implies it
may be null, however a dev_err messages dereferences this potential null
pointer.  Avoid a null pointer dereference by only emitting the dev_err
message if hdmi_phy is non-null.  It is a moot point if the error message
needs to be printed at all, but since this is a relatively new piece of
code it may be useful to keep the message in for the moment in case there
are unforseen errors that need to be reported.

Fixes: be28b650 ("drm/mediatek: separate hdmi phy to different file")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Dereference after null check")
Link: https://lore.kernel.org/r/20201207150937.170435-1-colin.king@canonical.com
[vkoul: fix indent of return call]
Signed-off-by: NVinod Koul <vkoul@kernel.org>

The driver uses devm_ioremap_resource() which will not be built if
CONFIG_HAS_IOMEM is not selected, so add depends on it to fix the build
failure on few archs

s390-linux-ld: drivers/phy/ingenic/phy-ingenic-usb.o: in function `ingenic_usb_phy_probe':
>> phy-ingenic-usb.c:(.text+0xb66): undefined reference to `devm_platform_ioremap_resource'
Reported-by: Nkernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20201208045300.3637026-1-vkoul@kernel.orgSigned-off-by: NVinod Koul <vkoul@kernel.org>

Enable protected audio video path client on mei client
bus.

Cc: Sean Z Huang <sean.z.huang@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20201116125612.1660971-2-tomas.winkler@intel.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add API to support vtag in communication on mei bus.

Add mei_cldev_send_vtag, mei_cldev_recv_vtag and
mei_cldev_recv_nonblock_vtag functions to allow sending a message
with vtag set and to receive vtag of an incoming message.

Cc: Sean Z Huang <sean.z.huang@intel.com>
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20201116125612.1660971-1-tomas.winkler@intel.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'soundwire-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next

Vinod writes:

soundwire updates for 5.11-rc1

Updates for last PR for this year contain:
- Improvements from Intel for port interrupt handling
- SDCA cascade interrupt support
- runtime pm for master device

* tag 'soundwire-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: intel: fix another unused-function warning
  soundwire: master: use pm_runtime_set_active() on add
  soundwire: qcom: Fix build failure when slimbus is module
  soundwire: bus: only clear valid DPN interrupts
  soundwire: bus: only clear valid DP0 interrupts
  soundwire: registers: add definitions for clearable interrupt fields
  soundwire: bus: reset slave_notify status at each loop
  soundwire: bus: add comments to explain interrupt loop filter
  soundwire: SDCA: detect sdca_cascade interrupt
  soundwire: Fix DEBUG_LOCKS_WARN_ON for uninitialized attribute

We want the fixes in here, and this resolves a merge issue with
drivers/misc/habanalabs/common/memory.c.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

mtk_hdmi_phy_driver is not declared as static, so statify it.

drivers/phy/mediatek/phy-mtk-hdmi.c:204:24: warning: symbol 'mtk_hdmi_phy_driver' was not declared. Should it be static?
Acked-by: NChun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/20201205091146.3184305-1-vkoul@kernel.orgSigned-off-by: NVinod Koul <vkoul@kernel.org>

Pull char/misc driver fixes from Greg KH:
 "Here are some small driver fixes, and one "large" revert, for
  5.10-rc7.

  They include:

   - revert mei patch from 5.10-rc1 that was using a reserved userspace
     value. It will be resubmitted once the proper id has been assigned
     by the virtio people.

   - habanalabs fixes found by the fall-through audit from Gustavo

   - speakup driver fixes for reported issues

   - fpga config build fix for reported issue.

  All of these except the revert have been in linux-next with no
  reported issues. The revert is "clean" and just removes a
  previously-added driver, so no real issue there"

* tag 'char-misc-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  Revert "mei: virtio: virtualization frontend driver"
  fpga: Specify HAS_IOMEM dependency for FPGA_DFL
  habanalabs: put devices before driver removal
  habanalabs: free host huge va_range if not used
  speakup: Reject setting the speakup line discipline outside of speakup

Pull tty fixes from Greg KH:
 "Here are two tty core fixes for 5.10-rc7.

  They resolve some reported locking issues in the tty core. While they
  have not been in a released linux-next yet, they have passed all of
  the 0-day bot testing as well as the submitter's testing"

* tag 'tty-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: Fix ->session locking
  tty: Fix ->pgrp locking in tiocspgrp()

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 5.10-rc7 that resolve a number of
  reported issues, and add some new device ids.

  Nothing major here, but these solve some problems that people were
  having with the 5.10-rc tree:

   - reverts for USB storage dma settings that broke working devices

   - thunderbolt use-after-free fix

   - cdns3 driver fixes

   - gadget driver userspace copy fix

   - new device ids

  All of these except for the reverts have been in linux-next with no
  reported issues. The reverts are "clean" and were tested by Hans, as
  well as passing the 0-day tests"

* tag 'usb-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: f_fs: Use local copy of descriptors for userspace copy
  usb: ohci-omap: Fix descriptor conversion
  Revert "usb-storage: fix sdev->host->dma_dev"
  Revert "uas: fix sdev->host->dma_dev"
  Revert "uas: bump hw_max_sectors to 2048 blocks for SS or faster drives"
  USB: serial: kl5kusb105: fix memleak on open
  USB: serial: ch341: sort device-id entries
  USB: serial: ch341: add new Product ID for CH341A
  USB: serial: option: fix Quectel BG96 matching
  usb: cdns3: core: fix goto label for error path
  usb: cdns3: gadget: clear trb->length as zero after preparing every trb
  usb: cdns3: Fix hardware based role switch
  USB: serial: option: add support for Thales Cinterion EXS82
  USB: serial: option: add Fibocom NL668 variants
  thunderbolt: Fix use-after-free in remove_unplugged_switch()

Pull x86 fixes from Thomas Gleixner:
 "A set of fixes for x86:

   - Make the AMD L3 QoS code and data priorization enable/disable
     mechanism work correctly.

     The control bit was only set/cleared on one of the CPUs in a L3
     domain, but it has to be modified on all CPUs in the domain. The
     initial documentation was not clear about this, but the updated one
     from Oct 2020 spells it out.

   - Fix an off by one in the UV platform detection code which causes
     the UV hubs to be identified wrongly.

     The chip revisions start at 1 not at 0.

   - Fix a long standing bug in the evaluation of prefixes in the
     uprobes code which fails to handle repeated prefixes properly.

     The aggregate size of the prefixes can be larger than the bytes
     array but the code blindly iterated over the aggregate size beyond
     the array boundary. Add a macro to handle this case properly and
     use it at the affected places"

* tag 'x86-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sev-es: Use new for_each_insn_prefix() macro to loop over prefixes bytes
  x86/insn-eval: Use new for_each_insn_prefix() macro to loop over prefixes bytes
  x86/uprobes: Do not use prefixes.nbytes when looping over prefixes.bytes
  x86/platform/uv: Fix UV4 hub revision adjustment
  x86/resctrl: Fix AMD L3 QOS CDP enable/disable

Pull perf fixes from Thomas Gleixner:
 "Two fixes for performance monitoring on X86:

   - Add recursion protection to another callchain invoked from
     x86_pmu_stop() which can recurse back into x86_pmu_stop(). The
     first attempt to fix this missed this extra code path.

   - Use the already filtered status variable to check for PEBS counter
     overflow bits and not the unfiltered full status read from
     IA32_PERF_GLOBAL_STATUS which can have unrelated bits check which
     would be evaluated incorrectly"

* tag 'perf-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Check PEBS status correctly
  perf/x86/intel: Fix a warning on x86_pmu_stop() with large PEBS

Pull irq fixes from Thomas Gleixner:
 "A set of updates for the interrupt subsystem:

   - Make multiqueue devices which use the managed interrupt affinity
     infrastructure work on PowerPC/Pseries. PowerPC does not use the
     generic infrastructure for setting up PCI/MSI interrupts and the
     multiqueue changes failed to update the legacy PCI/MSI
     infrastructure. Make this work by passing the affinity setup
     information down to the mapping and allocation functions.

   - Move Jason Cooper from MAINTAINERS to CREDITS as his mail is
     bouncing and he's not reachable. We hope all is well with him and
     say thanks for his work over the years"

* tag 'irq-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  powerpc/pseries: Pass MSI affinity to irq_create_mapping()
  genirq/irqdomain: Add an irq_create_mapping_affinity() function
  MAINTAINERS: Move Jason Cooper to CREDITS

Pull intel_idle build fix from Thomas Gleixner:
 "A tiny build fix for a recent change in the intel_idle driver which
  missed a CONFIG dependency and broke the build for certain
  configurations"

* tag 'locking-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  intel_idle: Build fix

Merge tag 'kbuild-fixes-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Move -Wcast-align to W=3, which tends to be false-positive and there
   is no tree-wide solution.

 - Pass -fmacro-prefix-map to KBUILD_CPPFLAGS because it is a
   preprocessor option and makes sense for .S files as well.

 - Disable -gdwarf-2 for Clang's integrated assembler to avoid warnings.

 - Disable --orphan-handling=warn for LLD 10.0.1 to avoid warnings.

 - Fix undesirable line breaks in *.mod files.

* tag 'kbuild-fixes-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: avoid split lines in .mod files
  kbuild: Disable CONFIG_LD_ORPHAN_WARN for ld.lld 10.0.1
  kbuild: Hoist '--orphan-handling' into Kconfig
  Kbuild: do not emit debug info for assembly with LLVM_IAS=1
  kbuild: use -fmacro-prefix-map for .S sources
  Makefile.extrawarn: move -Wcast-align to W=3

Merge misc fixes from Andrew Morton:
 "12 patches.

  Subsystems affected by this patch series: mm (memcg, zsmalloc, swap,
  mailmap, selftests, pagecache, hugetlb, pagemap), lib, and coredump"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/mmap.c: fix mmap return value when vma is merged after call_mmap()
  hugetlb_cgroup: fix offline of hugetlb cgroup with reservations
  mm/filemap: add static for function __add_to_page_cache_locked
  userfaultfd: selftests: fix SIGSEGV if huge mmap fails
  tools/testing/selftests/vm: fix build error
  mailmap: add two more addresses of Uwe Kleine-König
  mm/swapfile: do not sleep with a spin lock held
  mm/zsmalloc.c: drop ZSMALLOC_PGTABLE_MAPPING
  mm: list_lru: set shrinker map bit when child nr_items is not zero
  mm: memcg/slab: fix obj_cgroup_charge() return value handling
  coredump: fix core_pattern parse error
  zlib: export S390 symbols for zlib modules

On success, mmap should return the begin address of newly mapped area,
but patch "mm: mmap: merge vma after call_mmap() if possible" set
vm_start of newly merged vma to return value addr.  Users of mmap will
get wrong address if vma is merged after call_mmap().  We fix this by
moving the assignment to addr before merging vma.

We have a driver which changes vm_flags, and this bug is found by our
testcases.

Fixes: d70cec89 ("mm: mmap: merge vma after call_mmap() if possible")
Signed-off-by: NLiu Zixian <liuzixian4@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NJason Gunthorpe <jgg@nvidia.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Hongxiang Lou <louhongxiang@huawei.com>
Cc: Hu Shiyuan <hushiyuan@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Link: https://lkml.kernel.org/r/20201203085350.22624-1-liuzixian4@huawei.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Adrian Moreno was ruuning a kubernetes 1.19 + containerd/docker workload
using hugetlbfs.  In this environment the issue is reproduced by:

 - Start a simple pod that uses the recently added HugePages medium
   feature (pod yaml attached)

 - Start a DPDK app. It doesn't need to run successfully (as in transfer
   packets) nor interact with real hardware. It seems just initializing
   the EAL layer (which handles hugepage reservation and locking) is
   enough to trigger the issue

 - Delete the Pod (or let it "Complete").

This would result in a kworker thread going into a tight loop (top output):

   1425 root      20   0       0      0      0 R  99.7   0.0   5:22.45 kworker/28:7+cgroup_destroy

'perf top -g' reports:

  -   63.28%     0.01%  [kernel]                    [k] worker_thread
     - 49.97% worker_thread
        - 52.64% process_one_work
           - 62.08% css_killed_work_fn
              - hugetlb_cgroup_css_offline
                   41.52% _raw_spin_lock
                 - 2.82% _cond_resched
                      rcu_all_qs
                   2.66% PageHuge
        - 0.57% schedule
           - 0.57% __schedule

We are spinning in the do-while loop in hugetlb_cgroup_css_offline.
Worse yet, we are holding the master cgroup lock (cgroup_mutex) while
infinitely spinning.  Little else can be done on the system as the
cgroup_mutex can not be acquired.

Do note that the issue can be reproduced by simply offlining a hugetlb
cgroup containing pages with reservation counts.

The loop in hugetlb_cgroup_css_offline is moving page counts from the
cgroup being offlined to the parent cgroup.  This is done for each
hstate, and is repeated until hugetlb_cgroup_have_usage returns false.
The routine moving counts (hugetlb_cgroup_move_parent) is only moving
'usage' counts.  The routine hugetlb_cgroup_have_usage is checking for
both 'usage' and 'reservation' counts.  Discussion about what to do with
reservation counts when reparenting was discussed here:

https://lore.kernel.org/linux-kselftest/CAHS8izMFAYTgxym-Hzb_JmkTK1N_S9tGN71uS6MFV+R7swYu5A@mail.gmail.com/

The decision was made to leave a zombie cgroup for with reservation
counts.  Unfortunately, the code checking reservation counts was
incorrectly added to hugetlb_cgroup_have_usage.

To fix the issue, simply remove the check for reservation counts.  While
fixing this issue, a related bug in hugetlb_cgroup_css_offline was
noticed.  The hstate index is not reinitialized each time through the
do-while loop.  Fix this as well.

Fixes: 1adc4d41 ("hugetlb_cgroup: add interface for charge/uncharge hugetlb reservations")
Reported-by: NAdrian Moreno <amorenoz@redhat.com>
Signed-off-by: NMike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Tested-by: NAdrian Moreno <amorenoz@redhat.com>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201203220242.158165-1-mike.kravetz@oracle.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

  mm/filemap.c:830:14: warning: no previous prototype for `__add_to_page_cache_locked' [-Wmissing-prototypes]
Signed-off-by: NAlex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Link: https://lkml.kernel.org/r/1604661895-5495-1-git-send-email-alex.shi@linux.alibaba.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The error handling in hugetlb_allocate_area() was incorrect for the
hugetlb_shared test case.

Previously the behavior was:

- mmap a hugetlb area
  - If this fails, set the pointer to NULL, and carry on
- mmap an alias of the same hugetlb fd
  - If this fails, munmap the original area

If the original mmap failed, it's likely the second one did too.  If
both failed, we'd blindly try to munmap a NULL pointer, causing a
SIGSEGV.  Instead, "goto fail" so we return before trying to mmap the
alias.

This issue can be hit "in real life" by forgetting to set
/proc/sys/vm/nr_hugepages (leaving it at 0), and then trying to run the
hugetlb_shared test.

Another small improvement is, when the original mmap fails, don't just
print "it failed": perror(), so we can see *why*.  :)
Signed-off-by: NAxel Rasmussen <axelrasmussen@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Alan Gilbert <dgilbert@redhat.com>
Link: https://lkml.kernel.org/r/20201204203443.2714693-1-axelrasmussen@google.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Only x86 and PowerPC implement the pkey-xxx.h, and an error was reported
when compiling protection_keys.c.

Add a Arch judgment to compile "protection_keys" in the Makefile.

If other arch implement this, add the arch name to the Makefile.
eg:
    ifneq (,$(findstring $(ARCH),powerpc mips ... ))

Following build errors:

    pkey-helpers.h:93:2: error: #error Architecture not supported
     #error Architecture not supported
    pkey-helpers.h:96:20: error: `PKEY_DISABLE_ACCESS' undeclared
     #define PKEY_MASK (PKEY_DISABLE_ACCESS | PKEY_DISABLE_WRITE)
                        ^
    protection_keys.c:218:45: error: `PKEY_DISABLE_WRITE' undeclared
     pkey_assert(flags & (PKEY_DISABLE_ACCESS | PKEY_DISABLE_WRITE));
                                                ^
Signed-off-by: NXingxing Su <suxingxing@loongson.cn>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Link: https://lkml.kernel.org/r/1606826876-30656-1-git-send-email-suxingxing@loongson.cnSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This fixes attribution for the commits (among others)

 - d4097456 ("video/framebuffer: move the probe func into
   .devinit.text in Blackfin LCD driver")

 - 0312e024 ("mfd: mc13xxx: Add support for mc34708")
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20201127213358.3440830-1-u.kleine-koenig@pengutronix.deSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We can't call kvfree() with a spin lock held, so defer it.  Fixes a
might_sleep() runtime warning.

Fixes: 873d7bcf ("mm/swapfile.c: use kvzalloc for swap_info_struct allocation")
Signed-off-by: NQian Cai <qcai@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201202151549.10350-1-qcai@redhat.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While I was doing zram testing, I found sometimes decompression failed
since the compression buffer was corrupted.  With investigation, I found
below commit calls cond_resched unconditionally so it could make a
problem in atomic context if the task is reschedule.

  BUG: sleeping function called from invalid context at mm/vmalloc.c:108
  in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 946, name: memhog
  3 locks held by memhog/946:
   #0: ffff9d01d4b193e8 (&mm->mmap_lock#2){++++}-{4:4}, at: __mm_populate+0x103/0x160
   #1: ffffffffa3d53de0 (fs_reclaim){+.+.}-{0:0}, at: __alloc_pages_slowpath.constprop.0+0xa98/0x1160
   #2: ffff9d01d56b8110 (&zspage->lock){.+.+}-{3:3}, at: zs_map_object+0x8e/0x1f0
  CPU: 0 PID: 946 Comm: memhog Not tainted 5.9.3-00011-gc5bfc0287345-dirty #316
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
  Call Trace:
    unmap_kernel_range_noflush+0x2eb/0x350
    unmap_kernel_range+0x14/0x30
    zs_unmap_object+0xd5/0xe0
    zram_bvec_rw.isra.0+0x38c/0x8e0
    zram_rw_page+0x90/0x101
    bdev_write_page+0x92/0xe0
    __swap_writepage+0x94/0x4a0
    pageout+0xe3/0x3a0
    shrink_page_list+0xb94/0xd60
    shrink_inactive_list+0x158/0x460

We can fix this by removing the ZSMALLOC_PGTABLE_MAPPING feature (which
contains the offending calling code) from zsmalloc.

Even though this option showed some amount improvement(e.g., 30%) in
some arm32 platforms, it has been headache to maintain since it have
abused APIs[1](e.g., unmap_kernel_range in atomic context).

Since we are approaching to deprecate 32bit machines and already made
the config option available for only builtin build since v5.8, lastly it
has been not default option in zsmalloc, it's time to drop the option
for better maintenance.

[1] http://lore.kernel.org/linux-mm/20201105170249.387069-1-minchan@kernel.org

Fixes: e47110e9 ("mm/vunmap: add cond_resched() in vunmap_pmd_range")
Signed-off-by: NMinchan Kim <minchan@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Harish Sriram <harish@linux.ibm.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201117202916.GA3856507@google.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When investigating a slab cache bloat problem, significant amount of
negative dentry cache was seen, but confusingly they neither got shrunk
by reclaimer (the host has very tight memory) nor be shrunk by dropping
cache.  The vmcore shows there are over 14M negative dentry objects on
lru, but tracing result shows they were even not scanned at all.

Further investigation shows the memcg's vfs shrinker_map bit is not set.
So the reclaimer or dropping cache just skip calling vfs shrinker.  So
we have to reboot the hosts to get the memory back.

I didn't manage to come up with a reproducer in test environment, and
the problem can't be reproduced after rebooting.  But it seems there is
race between shrinker map bit clear and reparenting by code inspection.
The hypothesis is elaborated as below.

The memcg hierarchy on our production environment looks like:

                root
               /    \
          system   user

The main workloads are running under user slice's children, and it
creates and removes memcg frequently.  So reparenting happens very often
under user slice, but no task is under user slice directly.

So with the frequent reparenting and tight memory pressure, the below
hypothetical race condition may happen:

       CPU A                            CPU B
reparent
    dst->nr_items == 0
                                 shrinker:
                                     total_objects == 0
    add src->nr_items to dst
    set_bit
                                     return SHRINK_EMPTY
                                     clear_bit
child memcg offline
    replace child's kmemcg_id with
    parent's (in memcg_offline_kmem())
                                  list_lru_del() between shrinker runs
                                     see parent's kmemcg_id
                                     dec dst->nr_items
reparent again
    dst->nr_items may go negative
    due to concurrent list_lru_del()

                                 The second run of shrinker:
                                     read nr_items without any
                                     synchronization, so it may
                                     see intermediate negative
                                     nr_items then total_objects
                                     may return 0 coincidently

                                     keep the bit cleared
    dst->nr_items != 0
    skip set_bit
    add scr->nr_item to dst

After this point dst->nr_item may never go zero, so reparenting will not
set shrinker_map bit anymore.  And since there is no task under user
slice directly, so no new object will be added to its lru to set the
shrinker map bit either.  That bit is kept cleared forever.

How does list_lru_del() race with reparenting? It is because reparenting
replaces children's kmemcg_id to parent's without protecting from
nlru->lock, so list_lru_del() may see parent's kmemcg_id but actually
deleting items from child's lru, but dec'ing parent's nr_items, so the
parent's nr_items may go negative as commit 2788cf0c ("memcg:
reparent list_lrus and free kmemcg_id on css offline") says.

Since it is impossible that dst->nr_items goes negative and
src->nr_items goes zero at the same time, so it seems we could set the
shrinker map bit iff src->nr_items != 0.  We could synchronize
list_lru_count_one() and reparenting with nlru->lock, but it seems
checking src->nr_items in reparenting is the simplest and avoids lock
contention.

Fixes: fae91d6d ("mm/list_lru.c: set bit in memcg shrinker bitmap on first list_lru item appearance")
Suggested-by: NRoman Gushchin <guro@fb.com>
Signed-off-by: NYang Shi <shy828301@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NRoman Gushchin <guro@fb.com>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org>	[4.19]
Link: https://lkml.kernel.org/r/20201202171749.264354-1-shy828301@gmail.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>