Just in case the session's refcount reach 0 and is releasing, and
if we get the session without checking it, we may encounter kernel
crash.

Rename get_session to ceph_get_mds_session and make it global.
Signed-off-by: NXiubo Li <xiubli@redhat.com>
Reviewed-by: NJeff Layton <jlayton@kernel.org>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

The m_num_mds here is actually the number for MDSs which are in
up:active status, and it will be duplicated to m_num_active_mds,
so remove it.

Add possible_max_rank to the mdsmap struct and this will be
the correctly possible largest rank boundary.

Remove the special case for one mds in __mdsmap_get_random_mds(),
because the validate mds rank may not always be 0.
Signed-off-by: NXiubo Li <xiubli@redhat.com>
Reviewed-by: NJeff Layton <jlayton@kernel.org>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

If max_mds > 1 and a request is submitted that chooses a random mds
rank, and the relating session is not opened yet, the request will wait
until the session has been opened and resend again.

Every time the request goes through __do_request, it will release the
req->session first and choose a random one again, which may be a
completely different rank than the one it just waited on.

In the worst case, it will open all the mds sessions one by one just
before the request can be successfully sent out.
Signed-off-by: NXiubo Li <xiubli@redhat.com>
Reviewed-by: NJeff Layton <jlayton@kernel.org>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

If all the MDS daemons are down for some reason, then the first mount
attempt will fail with EIO after the mount request times out.  A mount
attempt will also fail with EIO if all of the MDS's are laggy.

This patch changes the code to return -EHOSTUNREACH in these situations
and adds a pr_info error message to help the admin determine the cause.

URL: https://tracker.ceph.com/issues/4386Signed-off-by: NXiubo Li <xiubli@redhat.com>
Reviewed-by: NJeff Layton <jlayton@kernel.org>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

When reconnecting the session but if it is denied by the MDS due
to client was in blacklist or something else, kclient will receive
a session close reply, and we will never see the important log:

"ceph:  mds%d reconnect denied"

And with the confusing log:

"ceph:  handle_session mds0 close 0000000085804730 state ??? seq 0"

Let's keep the session state until its memories is released.
Signed-off-by: NXiubo Li <xiubli@redhat.com>
Reviewed-by: NJeff Layton <jlayton@kernel.org>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Signed-off-by: NXiubo Li <xiubli@redhat.com>
Reviewed-by: NJeff Layton <jlayton@kernel.org>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

During umount, if there has no any unsafe request in the mdsc and
some requests still in-flight and not got reply yet, and if the
rest requets are all safe ones, after that even all of them in mdsc
are unregistered, the umount must wait until after mount_timeout
seconds anyway.
Signed-off-by: NXiubo Li <xiubli@redhat.com>
Reviewed-by: NJeff Layton <jlayton@kernel.org>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Even the MDS is in up:active state, but it also maybe laggy. Here
will skip the laggy MDSs.
Signed-off-by: NXiubo Li <xiubli@redhat.com>
Reviewed-by: NJeff Layton <jlayton@kernel.org>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

We print session's refcount in debug message inside
ceph_put_mds_session() and get_session(), so we don't have to
print it in con_get()/__ceph_lookup_mds_session()/con_put().
Signed-off-by: NChengguang Xu <cgxu519@gmx.com>
Reviewed-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Currently, we just assume that it will stick around by virtue of the
submitter's reference, but later patches will allow the syscall to
return early and we can't rely on that reference at that point.

While I'm not aware of any reports of it, Xiubo pointed out that this
may fix a use-after-free.  If the wait for a reply times out or is
canceled via signal, and then the reply comes in after the syscall
returns, the client can end up trying to access r_parent without a
reference.

Take an extra reference to the inode when setting r_parent and release
it when releasing the request.

Cc: stable@vger.kernel.org
Signed-off-by: NJeff Layton <jlayton@kernel.org>
Reviewed-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

The nr in ceph_reclaim_caps_nr() is very possibly larger than 1,
so we may miss it and the reclaim work couldn't triggered as expected.
Signed-off-by: NXiubo Li <xiubli@redhat.com>
Reviewed-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Add some visibility of tasks that are waiting for caps to the "caps"
debugfs file. Display the tgid of the waiting task, inode number, and
the caps the task needs and wants.
Signed-off-by: NJeff Layton <jlayton@kernel.org>
Reviewed-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Most of these values should never be negative, so convert them to
unsigned values. Add some sanity checking to the parsed values, and
clean up some unneeded casts.

Note that while caps_max should never be negative, this patch leaves
it signed, since this value ends up later being compared to a signed
counter. Just ensure that userland never passes in a negative value
for caps_max.
Signed-off-by: NJeff Layton <jlayton@kernel.org>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

We currently just pass junk in this field unless we're retransmitting a
create, but in later patches, we'll need a mechanism to pass a delegated
inode number on an initial create request. Prepare for this by ensuring
this field is zeroed out.
Signed-off-by: NJeff Layton <jlayton@kernel.org>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

When this occurs, it usually means that we raced with a rename, and
there is no need to warn in that case.  Only printk if we pass the
rename sequence check but still ended up with pos < 0.

Either way, this doesn't warrant a KERN_ERR message. Change it to
KERN_WARNING.
Signed-off-by: NJeff Layton <jlayton@kernel.org>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

In the future, we're going to want to extend the ceph_reply_info_extra
for create replies. Currently though, the kernel code doesn't accept an
extra blob that is larger than the expected data.

Change the code to skip over any unrecognized fields at the end of the
extra blob, rather than returning -EIO.

Cc: stable@vger.kernel.org
Signed-off-by: NJeff Layton <jlayton@kernel.org>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

If client mds session is evicted in CEPH_MDS_SESSION_OPENING state,
mds won't send session msg to client, and delayed_work skip
CEPH_MDS_SESSION_OPENING state session, the session hang forever.

Allow ceph_con_keepalive to reconnect a session in OPENING to avoid
session hang. Also, ensure that we skip sessions in RESTARTING and
REJECTED states since those states can't be resurrected by issuing
a keepalive.

Link: https://tracker.ceph.com/issues/41551
Signed-off-by: Erqi Chen chenerqi@gmail.com
Reviewed-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NJeff Layton <jlayton@kernel.org>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

It's only used to keep count of caps being trimmed, but that requires
that we hold the session->s_mutex to prevent multiple trimming
operations from running concurrently.

We can achieve the same effect using an integer on the stack, which
allows us to (eventually) not need the s_mutex.
Signed-off-by: NJeff Layton <jlayton@kernel.org>
Reviewed-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Make client use osd reply and session message to infer if itself is
blacklisted. Client reconnect to cluster using new entity addr if it
is blacklisted. Auto reconnect is limited to once every 30 minutes.

Auto reconnect is disabled by default. It can be enabled/disabled by
recover_session=<no|clean> mount option. In 'clean' mode, client drops
any dirty data/metadata, invalidates page caches and invalidates all
writable file handles. After reconnect, file locks become stale because
MDS loses track of them. If an inode contains any stale file locks,
read/write on the indoe are not allowed until applications release all
stale file locks.
Signed-off-by: N"Yan, Zheng" <zyan@redhat.com>
Reviewed-by: NJeff Layton <jlayton@kernel.org>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

It closes mds sessions, drop all caps and invalidates page caches,
then use new entity address to reconnect to the cluster.

After reconnect, all dirty data/metadata are dropped, file locks
get lost sliently. Open files continue to work because client will
try renewing caps on later read/write.
Signed-off-by: N"Yan, Zheng" <zyan@redhat.com>
Reviewed-by: NJeff Layton <jlayton@kernel.org>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Use errseq_t to track and report errors of async metadata operations,
similar to how kernel handles errors during writeback.

If any dirty caps or any unsafe request gets dropped during session
eviction, record -EIO in corresponding inode's i_meta_err. The error
will be reported by subsequent fsync,
Signed-off-by: N"Yan, Zheng" <zyan@redhat.com>
Reviewed-by: NJeff Layton <jlayton@kernel.org>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Signed-off-by: NJeff Layton <jlayton@kernel.org>
Reviewed-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Signed-off-by: NJeff Layton <jlayton@kernel.org>
Reviewed-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Link: https://tracker.ceph.com/issues/40339Signed-off-by: N"Yan, Zheng" <zyan@redhat.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

handle_cap_export() may add placeholder caps to session that is in
opening state. These caps' session pointer become wild after session get
unregistered.

The fix is not to unregister session in opening state during mds failovers,
just let client to reconnect later when mds is recovered.

Link: https://tracker.ceph.com/issues/40190Signed-off-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Signed-off-by: N"Yan, Zheng" <zyan@redhat.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Signed-off-by: N"Yan, Zheng" <zyan@redhat.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

MDS InodeStat v3 wire structures include a trailing snapshot creation
time member. Unmarshall this and retain it for a future vxattr.
Signed-off-by: NDavid Disseldorp <ddiss@suse.de>
Reviewed-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

When ceph_mdsc_build_path is handed a positive dentry, it will return a
zero-length path string with the base set to that dentry.  This is not
what we want.  Always include at least one path component in the string.

ceph_mdsc_build_path has behaved this way for a long time but it didn't
matter until recent d_name handling rework.

Fixes: 964fff74 ("ceph: use ceph_mdsc_build_path instead of clone_dentry_name")
Signed-off-by: NJeff Layton <jlayton@kernel.org>
Reviewed-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

iput_final() may wait for reahahead pages. The wait can cause deadlock.
For example:

  Workqueue: ceph-msgr ceph_con_workfn [libceph]
    Call Trace:
     schedule+0x36/0x80
     io_schedule+0x16/0x40
     __lock_page+0x101/0x140
     truncate_inode_pages_range+0x556/0x9f0
     truncate_inode_pages_final+0x4d/0x60
     evict+0x182/0x1a0
     iput+0x1d2/0x220
     iterate_session_caps+0x82/0x230 [ceph]
     dispatch+0x678/0xa80 [ceph]
     ceph_con_workfn+0x95b/0x1560 [libceph]
     process_one_work+0x14d/0x410
     worker_thread+0x4b/0x460
     kthread+0x105/0x140
     ret_from_fork+0x22/0x40

  Workqueue: ceph-msgr ceph_con_workfn [libceph]
    Call Trace:
     __schedule+0x3d6/0x8b0
     schedule+0x36/0x80
     schedule_preempt_disabled+0xe/0x10
     mutex_lock+0x2f/0x40
     ceph_check_caps+0x505/0xa80 [ceph]
     ceph_put_wrbuffer_cap_refs+0x1e5/0x2c0 [ceph]
     writepages_finish+0x2d3/0x410 [ceph]
     __complete_request+0x26/0x60 [libceph]
     handle_reply+0x6c8/0xa10 [libceph]
     dispatch+0x29a/0xbb0 [libceph]
     ceph_con_workfn+0x95b/0x1560 [libceph]
     process_one_work+0x14d/0x410
     worker_thread+0x4b/0x460
     kthread+0x105/0x140
     ret_from_fork+0x22/0x40

In above example, truncate_inode_pages_range() waits for readahead pages
while holding s_mutex. ceph_check_caps() waits for s_mutex and blocks
OSD dispatch thread. Later OSD replies (for readahead) can't be handled.

ceph_check_caps() also may lock snap_rwsem for read. So similar deadlock
can happen if iput_final() is called while holding snap_rwsem.

In general, it's not good to call iput_final() inside MDS/OSD dispatch
threads or while holding any mutex.

The fix is introducing ceph_async_iput(), which calls iput_final() in
workqueue.
Signed-off-by: N"Yan, Zheng" <zyan@redhat.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Signed-off-by: NJeff Layton <jlayton@kernel.org>
Reviewed-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

I originally thought there was a potential race here, but the fact
that this is called with the mdsc->mutex held, ensures that the
last reference to the session can't be put here.

Still, it's clearer to just return the value from get_session here,
and may prevent a bug later if we ever rework this code to be less
reliant on mutexes.
Signed-off-by: NJeff Layton <jlayton@kernel.org>
Reviewed-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Signed-off-by: NJeff Layton <jlayton@kernel.org>
Reviewed-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Nothing calls ceph_mdsc_submit_request today, but in later patches we'll
need to be able to call this separately.

Have the helper return an int so we can check the r_err under the mutex,
and have the caller just check the error code from the submit. Also move
the acquisition of CEPH_CAP_PIN references into the same function.
Signed-off-by: NJeff Layton <jlayton@kernel.org>
Reviewed-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

No MDS requests use r_callback today, but that will change in the
future. The OSD client always does r_callback and then completes
r_completion. Let's have the MDS client do the same.
Signed-off-by: NJeff Layton <jlayton@kernel.org>
Reviewed-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

We make copies of the dentry name in set_request_path_attr, but then
create_request_message re-fetches the lengths out of the dentry. While
we don't currently set the *_drop fields unless the parents are locked,
it's still better not to rely on that sort of implicit assumption.

Use the pathlen values that set_request_path_attr returned instead, as
they will always be correct for the returned paths themselves.
Signed-off-by: NJeff Layton <jlayton@kernel.org>
Reviewed-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Al suggested we get rid of the kmalloc here and just use __getname
and __putname to get a full PATH_MAX pathname buffer.

Since we build the path in reverse, we continue to return a pointer
to the beginning of the string and the length, and add a new helper
to free the thing at the end.
Suggested-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Layton <jlayton@kernel.org>
Reviewed-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

While it may be slightly more efficient, it's probably not worthwhile to
optimize for the case that clone_dentry_name handles. We can get the
same result by just calling ceph_mdsc_build_path when the parent isn't
locked, with less code duplication.
Signed-off-by: NJeff Layton <jlayton@kernel.org>
Reviewed-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

temp is not defined outside of the RCU critical section here. Ensure
we grab that value before we drop the rcu_read_lock.
Reported-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Layton <jlayton@kernel.org>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Signed-off-by: NJeff Layton <jlayton@kernel.org>
Reviewed-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>