Enable having ICM tables in coherent memory, and use coherent memory
for the dMPT table.  This will allow writing MPT entries for MRs both
via the SW2HW_MPT command and also directly by the driver for FMR
remapping without needing to flush or worry about cacheline boundaries.
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NMichael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

ib_uverbs_release_event_file() is only used in uverbs_main.c, so make it
static to that file.  Also move the definition before the first use, so
a forward declaration is not needed.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The declaration of struct ib_user_mad_reg_req.method_mask[] exported
to userspace was an array of __u32, but the kernel internally treated
it as a bitmap made up of longs.  This makes a difference for 64-bit
big-endian kernels, where numbering the bits in an array of__u32 gives:

    |31.....0|63....31|95....64|127...96|

while numbering the bits in an array of longs gives:

    |63..............0|127............64|

64-bit userspace can handle this by just treating method_mask[] as an
array of longs, but 32-bit userspace is really stuck: the meaning of
the bits in method_mask[] depends on whether the kernel is 32-bit or
64-bit, and there's no sane way for userspace to know that.

Fix this by updating <rdma/ib_user_mad.h> to make it clear that
method_mask[] is an array of longs, and using a compat_ioctl method to
convert to an array of 64-bit longs to handle the 32-on-64 problem.
This fixes the interface description to match existing behavior (so
working binaries continue to work) in almost all situations, and gives
consistent semantics in the case of 32-bit userspace that can run on
either a 32-bit or 64-bit kernel, so that the same binary can work for
both 32-on-32 and 32-on-64 systems.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Add support for setting the P_Key index of sent MADs and getting the
P_Key index of received MADs.  This requires a change to the layout of
the ABI structure struct ib_user_mad_hdr, so to avoid breaking
compatibility, we default to the old (unchanged) ABI and add a new
ioctl IB_USER_MAD_ENABLE_PKEY that allows applications that are aware
of the new ABI to opt into using it.

We plan on switching to the new ABI by default in a year or so, and
this patch adds a warning that is printed when an application uses the
old ABI, to push people towards converting to the new ABI.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
Reviewed-by: NSean Hefty <sean.hefty@intel.com>
Reviewed-by: NHal Rosenstock <hal@xsigo.com>

Totally forgot this.
Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Signed-off-by: NHoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Signed-off-by: NHoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

display the following device information under /sys/class/infiniband/mlx4_X:
board_id, fw_ver, hw_rev, hca_type.

This patch makes this information available to userspace utilities
such as ibstat and ibv_devinfo.
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

I was looking at the code for multicast.c and noticed that
ib_sa_join_multicast() calls queue_join() which puts the
request at the front of the group->pending_list.  If this
is a second request, it seems like it would interfere with
process_join_error() since group->last_join won't point
to the member at the head of the pending_list. The sequence
would thus be:

1. ib_sa_join_multicast()
   puts member1 on head of pending_list and starts work thread
2. mcast_work_handler()
   calls send_join() which sets group->last_join to member1
3. ib_sa_join_multicast()
   puts member2 on head of pending_list
4. join operation for member1 receives failures response from SA.
5. join_handler() is called with error status
6. process_join_error() fails to process member1 since
   it doesn't match the first entry in the group->pending_list.

The impact is that the failed join request is tossed.  The second
request is processed, and after it completes, the original request ends
up being retried.

This change also results in join requests being processed in FIFO
order.
Signed-off-by: NRalph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

* Replace {un}register_cpu_notifier with {un}register_hotcpu_notifier
  thereby losing a couple of #ifdef HOTPLUG_CPU pairs.
* Move comp_pool_callback_nb declaration to below that of callback
  function so that initialization of .notifier_call and .priority can
  occur at build time itself and not runtime.
* Mark the notifier_block (and callback function, and another static
  function used by it) as __cpuinit{data} for the sake of consistency
  and remove enclosing #ifdef. (This may increase size for modular
  build of this module, however, because these are no longer dropped
  unconditionally now.)
Signed-off-by: NSatyam Sharma <satyam@infradead.org>
Acked-by: NJoachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The SRC ("scalable RC") transport has been renamed to XRC ("extended 
RC"), to avoid having an abbreviation that is so easily confused with an 
abbreviation for "source."  Update the HCA capability decoding output to 
use the new name.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

<asm/scatterlist.h> is not needed because everyplace it appears,
<linux/scatterlist.h> also appears.  <asm/io.h> is not needed because
nothing seems to be using device IO anyway.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Calling arp_send() to initiate neighbour discovery (ND) doesn't do the
full ND protocol.  Namely, it doesn't handle retransmitting the arp
request if it is dropped. The function neigh_event_send() does all
this.  Without doing full ND, RDMA address resolution fails in the
presence of dropped ARP broadcast packets.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Acked-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

...because, on virtualized hardware like System p, we can't be sure
that the physical pages behind them are contiguous otherwise.
Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

During ib_umem_get(), determine whether all pages from the memory
region are hugetlb pages and report this in the "hugetlb" member.
Low-level drivers can use this information if they need it.
Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Provide the target service ID when performing a path record query to
support optional QoS capability.  QoS requires support from the SA.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Export the ability to set the type of service to user space.  Model
the interface after setsockopt.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Provide support to specify a type of service for a communication
identifier.  A new function call is used when dealing with IPv4
addresses.  For IPv6 addresses, the ToS is specified through the
traffic class field in the sockaddr_in6 structure.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>

[ The comments Eitan Zahavi and myself have made over the v1 post at 
  <http://lists.openfabrics.org/pipermail/general/2007-August/039247.html>
  were fully addressed. ]
 
Reviewed-by: Or Gerlitz <ogerlitz@voltaire.com> 
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The QoS annex defines new fields for path records.  Add them to the
ib_sa for consumers that want to use them.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Reviewed-by: NOr Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

To support QoS within and between subnets, modify IPoIB to request
specific Traffic Class values with path record queries, using
the value associated with the IPoIB broadcast group.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>

[ See some comments I made on this at v1 and v2 of the posts
  <http://lists.openfabrics.org/pipermail/general/2007-August/039275.html>
  <http://lists.openfabrics.org/pipermail/general/2007-September/040312.html> ]
Reviewed-by: NOr Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Nobody needed the SVNEHCA_ prefix anyway.
Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

We can use raw_smp_processor_id() here because the processor ID is
only used for debug output and therefore our use is preemption-unsafe.
Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Some firmware levels exhibit a race condition between H_ALLOC_RESOURCE(MR)
and H_FREE_RESOURCE(MR).  Work around this problem by locking these hvCalls
against each other.
Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Fix some modify_qp() issues related to path migration.
Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

...because -12 is easier to read than FFFFFFF4.
Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Change hvcall trace output towards better readability: reg numbers
instead of argument numbers, return code as signed decimal instead of
unsigned hex.
Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Use Paul's new remap_4k_pfn() function to map our 4K firmware contexts
into user space on 64K-page machines without exposing neighboring
firmware contexts. Return the context's offset within a 64K page to
user space so it can determine the proper virtual address.

For details about remap_4k_pfn(), see commit 721151d0 or
http://patchwork.ozlabs.org/linuxppc/patch?id=10281Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

These driver changes incorporate the proposed PCI-X / PCI-Express read
byte count interface.  Reading and setting those values doesn't take
place "manually", instead wrapping functions are called to allow
quirks for some PCI bridges.

Signed-off by: Peter Oruba <peter.oruba@amd.com>
Based on work by Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

ib_create_send_mad() returns an error code pointer on error, not NULL.
Signed-off-by: NMichael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

At the moment the ehca module parameters are not exported in sysfs.
Export them with 0444 permissions.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Acked-by: NHoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

ehca spits out a lot of debugging information. I had to look closely to
see the "Port 1 is not active" message within all the debug:

eHCA Infiniband Device Driver (Rel.: SVNEHCA_0022)
eHCA scaling code enabled
ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_define_sqp Port 1 is not active.
ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_create_qp ehca_define_sqp() failed rc=ffffffffffffffff
ib_mad: Couldn't create ib_mad QP1
ib_mad: Couldn't open ehca0 port 1
ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_alloc_fmr unsupported fmr_attr->page_shift=9
ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_alloc_fmr rc=ffffffffffffffea pd=c000000b4b5b2420 mr_access_flags=7 fmr_attr=c0000005afd37394
fmr_create failed for FMR 0

Remove a few debug statements so that things are clearer:

eHCA Infiniband Device Driver (Rel.: SVNEHCA_0022)
eHCA scaling code enabled
ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_define_sqp Port 1 is not active.
ib_mad: Couldn't create ib_mad QP1
ib_mad: Couldn't open ehca0 port 1
ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_alloc_fmr unsupported fmr_attr->page_shift=9
fmr_create failed for FMR 0
Signed-off-by: NAnton Blanchard <anton@samba.org>
Acked-by: NHoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

mlx4_srq_query() returns a big-endian 16-bit value through an int *,
which screws up sparse checking.  Fix this so that a CPU-endian value
is returned.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Clean up properly if ib_query_pkey() or ib_query_gid() fail.
Signed-off-by: NEli Cohen <eli@mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Signed-off-by: NEli Cohen <eli@mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Recover from MSI-X errors by automatically falling back on regular
interrupt, instead of asking the user to do this manually.  This makes
it possible to enable MSI-X by default, and will make it possible to
get rid of the msi_x module option in the future.
Signed-off-by: NMichael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>