- 27 12月, 2019 40 次提交
-
-
由 Michael S. Tsirkin 提交于
[ Upstream commit c5c08bed ] Fixes: d3849953 ("fs: decouple READ and WRITE from the block layer ops") Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Geert Uytterhoeven 提交于
[ Upstream commit bed1369f ] When running the kernel in Fast RAM on Atari: Ignoring memory chunk at 0x0:0xe00000 before the first chunk ... Unable to handle kernel NULL pointer dereference at virtual address (ptrval) Oops: 00000000 Modules linked in: PC: [<0069dbac>] free_all_bootmem+0x12c/0x186 SR: 2714 SP: (ptrval) a2: 005e3314 d0: 00000000 d1: 0000000a d2: 00000e00 d3: 00000000 d4: 005e1fc0 d5: 0000001a a0: 01000000 a1: 00000000 Process swapper (pid: 0, task=(ptrval)) Frame format=7 eff addr=00000736 ssw=0505 faddr=00000736 wb 1 stat/addr/data: 0000 00000000 00000000 wb 2 stat/addr/data: 0000 00000000 00000000 wb 3 stat/addr/data: 0000 00000736 00000000 push data: 00000000 00000000 00000000 00000000 Stack from 005e1f84: 00000000 0000000a 027d3260 006b5006 00000000 00000000 00000000 00000000 0004f062 0003a220 0069e272 005e1ff8 0000054c 00000000 00e00000 00000000 00000001 00693cd8 027d3260 0004f062 0003a220 00691be6 00000000 00000000 00000000 00000000 00000000 00000000 006b5006 00000000 00690872 Call Trace: [<0004f062>] printk+0x0/0x18 [<0003a220>] parse_args+0x0/0x2d4 [<0069e272>] memblock_virt_alloc_try_nid+0x0/0xa4 [<00693cd8>] mem_init+0xa/0x5c [<0004f062>] printk+0x0/0x18 [<0003a220>] parse_args+0x0/0x2d4 [<00691be6>] start_kernel+0x1ca/0x462 [<00690872>] _sinittext+0x872/0x11f8 Code: 7a1a eaae 2270 6db0 0061 ef14 2f01 2f03 <96a9> 0736 2203 e589 d681 e78b d6a9 0732 2f03 2f40 0034 4eb9 0069 b8d0 260e 4fef Disabling lock debugging due to kernel taint Kernel panic - not syncing: Attempted to kill the idle task! As the kernel must run in the memory chunk with the lowest address, ST-RAM is ignored, and removed from the m68k_memory[] array. However, it is not removed from memblock, causing a crash later. More investigation shows that there are 3 places where memory chunks are ignored, all after the calls to memblock_add() in m68k_parse_bootinfo(), and thus causing crashes: 1. On classic m68k CPUs with a MMU, paging_init() ignores all memory chunks below the first chunk, cfr. above, 2. On Amigas equipped with a Zorro III bus, config_amiga() ignores all Zorro II memory, 3. If CONFIG_SINGLE_MEMORY_CHUNK=y, m68k_parse_bootinfo() ignores all but the first memory chunk. Fix this by moving the calls to memblock_add() from m68k_parse_bootinfo() to paging_init(), after all ignored memory chunks have been removed from m68k_memory[]. Reported-by: NAndreas Schwab <schwab@linux-m68k.org> Fixes: 1008a115 ("m68k: switch to MEMBLOCK + NO_BOOTMEM") Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Masahiro Yamada 提交于
[ Upstream commit ef7cfd00 ] For the same reason as commit 25896d07 ("x86/build: Fix compiler support check for CONFIG_RETPOLINE"), you cannot put this $(error ...) into the parse stage of the top Makefile. Perhaps I'd propose a more sophisticated solution later, but this is the best I can do for now. Link: https://lkml.org/lkml/2017/12/25/211Reported-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Reported-by: NBernd Edlinger <bernd.edlinger@hotmail.de> Reported-by: NQian Cai <cai@lca.pw> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Tested-by: NQian Cai <cai@lca.pw> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Sara Sharon 提交于
[ Upstream commit 34b1e0e9 ] mac80211 uses the frag list to build AMSDU. When freeing the skb, it may not be really freed, since someone is still holding a reference to it. In that case, when TCP skb is being retransmitted, the pointer to the frag list is being reused, while the data in there is no longer valid. Since we will never get frag list from the network stack, as mac80211 doesn't advertise the capability, we can safely free and nullify it before releasing the SKB. Signed-off-by: NSara Sharon <sara.sharon@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Johannes Berg 提交于
[ Upstream commit d350a0f4 ] If validate_pae_over_nl80211() were to fail in nl80211_crypto_settings(), we might leak the 'connkeys' allocation. Fix this. Fixes: 64bf3d4b ("nl80211: Add CONTROL_PORT_OVER_NL80211 attribute") Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Colin Ian King 提交于
[ Upstream commit f7db2beb ] Currently variable data0 is not being initialized so a garbage value is being passed to vxge_hw_vpath_fw_api and this value is being written to the rts_access_steer_data0 register. There are other occurrances where data0 is being initialized to zero (e.g. in function vxge_hw_upgrade_read_version) so I think it makes sense to ensure data0 is initialized likewise to 0. Detected by CoverityScan, CID#140696 ("Uninitialized scalar variable") Fixes: 8424e00d ("vxge: serialize access to steering control register") Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Jason Martinsen 提交于
[ Upstream commit 15515aaa ] Current state for the lan78xx driver does not allow for changing the MAC address of the interface, without either removing the module (if you compiled it that way) or rebooting the machine. If you attempt to change the MAC address, ifconfig will show the new address, however, the system/interface will not respond to any traffic using that configuration. A few short-term options to work around this are to unload the module and reload it with the new MAC address, change the interface to "promisc", or reboot with the correct configuration to change the MAC. This patch enables the ability to change the MAC address via fairly normal means... ifdown <interface> modify entry in /etc/network/interfaces OR a similar method ifup <interface> Then test via any network communication, such as ICMP requests to gateway. My only test platform for this patch has been a raspberry pi model 3b+. Signed-off-by: NJason Martinsen <jasonmartinsen@msn.com> ----- Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Bryan Whitehead 提交于
[ Upstream commit 0db7d253 ] The LAN7431 uses an external phy, and it can be found anywhere in the phy address space. This patch uses phy address 1 for LAN7430 only. And searches all addresses otherwise. Signed-off-by: NBryan Whitehead <Bryan.Whitehead@microchip.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Anssi Hannula 提交于
[ Upstream commit 6e0af298 ] When reading buffer descriptors on RX or on TX completion, an RX_USED/TX_USED bit is checked first to ensure that the descriptors have been populated, i.e. the ownership has been transferred. However, there are no memory barriers to ensure that the data protected by the RX_USED/TX_USED bit is up-to-date with respect to that bit. Specifically: - TX timestamp descriptors may be loaded before ctrl is loaded for the TX_USED check, which is racy as the descriptors may be updated between the loads, causing old timestamp descriptor data to be used. - RX ctrl may be loaded before addr is loaded for the RX_USED check, which is racy as a new frame may be written between the loads, causing old ctrl descriptor data to be used. This issue exists for both macb_rx() and gem_rx() variants. Fix the races by adding DMA read memory barriers on those paths and reordering the reads in macb_rx(). I have not observed any actual problems in practice caused by these being missing, though. Tested on a ZynqMP based system. Fixes: 89e5785f ("[PATCH] Atmel MACB ethernet driver") Signed-off-by: NAnssi Hannula <anssi.hannula@bitwise.fi> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Anssi Hannula 提交于
[ Upstream commit 8159ecab ] Bit RX_USED set to 0 in the address field allows the controller to write data to the receive buffer descriptor. The driver does not ensure the ctrl field is ready (cleared) when the controller sees the RX_USED=0 written by the driver. The ctrl field might only be cleared after the controller has already updated it according to a newly received frame, causing the frame to be discarded in gem_rx() due to unexpected ctrl field contents. A message is logged when the above scenario occurs: macb ff0b0000.ethernet eth0: not whole frame pointed by descriptor Fix the issue by ensuring that when the controller sees RX_USED=0 the ctrl field is already cleared. This issue was observed on a ZynqMP based system. Fixes: 4df95131 ("net/macb: change RX path for GEM") Signed-off-by: NAnssi Hannula <anssi.hannula@bitwise.fi> Tested-by: NClaudiu Beznea <claudiu.beznea@microchip.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Anssi Hannula 提交于
[ Upstream commit e100a897 ] 64-bit DMA addresses are split in upper and lower halves that are written in separate fields on GEM. For RX, bit 0 of the address is used as the ownership bit (RX_USED). When the RX_USED bit is unset the controller is allowed to write data to the buffer. The driver does not guarantee that the controller already sees the upper half when the RX_USED bit is cleared, possibly resulting in the controller writing an incoming frame to an address with an incorrect upper half and therefore possibly corrupting unrelated system memory. Fix that by adding the necessary DMA memory barrier between the writes. This corruption was observed on a ZynqMP based system. Fixes: fff8019a ("net: macb: Add 64 bit addressing support for GEM") Signed-off-by: NAnssi Hannula <anssi.hannula@bitwise.fi> Acked-by: NHarini Katakam <harini.katakam@xilinx.com> Tested-by: NClaudiu Beznea <claudiu.beznea@microchip.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Dan Carpenter 提交于
[ Upstream commit f07d4276 ] We accidentally deleted the code to set "rc = -ENOMEM;" and this patch adds it back. Fixes: d2201a21 ("qed: No need for LL2 frags indication") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Trond Myklebust 提交于
[ Upstream commit cf76785d ] Ensure that we clear XPRT_CONNECTING before releasing the XPRT_LOCK so that we don't have races between the (asynchronous) socket setup code and tasks in xprt_connect(). Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com> Tested-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Sara Sharon 提交于
[ Upstream commit a50e5fb8 ] Recently TXQ teardown was moved earlier in ieee80211_unregister_hw(), to avoid a use-after-free of the netdev data. However, interfaces aren't fully removed at the point, and cfg80211_shutdown_all_interfaces can for example, TX a deauth frame. Move the TXQ teardown to the point between cfg80211_shutdown_all_interfaces and the free of netdev queues, so we can be sure they are torn down before netdev is freed, but after there is no ongoing TX. Fixes: 77cfaf52 ("mac80211: Run TXQ teardown code before de-registering interfaces") Signed-off-by: NSara Sharon <sara.sharon@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Arnd Bergmann 提交于
[ Upstream commit 51367e42 ] The get_mac_address() function is normally inline, but when it is not, we get a warning that this configuration is broken: WARNING: vmlinux.o(.text+0x4aff00): Section mismatch in reference from the function w90p910_ether_setup() to the function .init.text:get_mac_address() The function w90p910_ether_setup() references the function __init get_mac_address(). This is often because w90p910_ether_setup lacks a __init Remove the __init to make it always do the right thing. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Atul Gupta 提交于
[ Upstream commit 6c0563e4 ] create_ctx is called from tls_init and tls_hw_prot hence initialize function pointers in common routine. Signed-off-by: NAtul Gupta <atul.gupta@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Nathan Chancellor 提交于
[ Upstream commit 2ab4c342 ] Clang warns: drivers/net/ethernet/apm/xgene/xgene_enet_main.c:33:36: warning: tentative array definition assumed to have one element static const struct acpi_device_id xgene_enet_acpi_match[]; ^ 1 warning generated. Both xgene_enet_acpi_match and xgene_enet_of_match are defined before their uses at the bottom of the file so this is unnecessary. When CONFIG_ACPI is disabled, ACPI_PTR becomes NULL so xgene_enet_acpi_match doesn't need to be defined. Signed-off-by: NNathan Chancellor <natechancellor@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Sinan Kaya 提交于
[ Upstream commit c629421a990033ba539eb8585e73a2e6fa9ea631 ] Need to be able to boot without PCI devices present. Signed-off-by: NSinan Kaya <okaya@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Lorenzo Bianconi 提交于
[ Upstream commit 7c250f46 ] Starting from mac80211 commit adf8ed01 ("mac80211: add an optional TXQ for other PS-buffered frames") and commit 0eeb2b67 ("mac80211: add an option for station management TXQ") a new per-sta queue has been introduced for bufferable management frames. sta->txq[IEEE80211_NUM_TIDS] is initialized just if the driver reports the following hw flags: - IEEE80211_HW_STA_MMPDU_TXQ - IEEE80211_HW_BUFF_MMPDU_TXQ This can produce a NULL pointer dereference in mt76_stop_tx_queues since mt76 iterates on all available sta tx queues assuming they are initialized by mac80211. This issue has been spotted analyzing the code (it has not triggered any crash yet) Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Varun Prakash 提交于
[ Upstream commit 9e6371d3c6913ff1707fb2c0274c9925f7aaef80 ] Add missing spin_lock_init() for cdev->np_lock. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Varun Prakash 提交于
[ Upstream commit 801df68d617e3cb831f531c99fa6003620e6b343 ] csk leak can happen if a new TCP connection gets established after cxgbit_accept_np() returns, to fix this leak free remaining csk in cxgbit_free_np(). Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Sudarsana Reddy Kalluru 提交于
[ Upstream commit 9061193c4ee065d3240fde06767c2e06ec61decc ] Driver sends update-SVID ramrod in the MFW notification path. If there is a pending ramrod, driver doesn't retry the command and storm firmware will never be updated with the SVID value. The patch adds changes to send update-svid ramrod in process context with retry/poll flags set. Signed-off-by: NSudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: NAriel Elior <ariel.elior@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Sudarsana Reddy Kalluru 提交于
[ Upstream commit 04f05230 ] Vlans are not getting removed when drivers are unloaded. The recent storm firmware versions had added safeguards against re-configuring an already configured vlan. As a result, PF inner reload flows (e.g., mtu change) might trigger an assertion. This change is going to remove vlans (same as we do for MACs) when doing a chip cleanup during unload. Signed-off-by: NSudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: NAriel Elior <ariel.elior@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Sudarsana Reddy Kalluru 提交于
[ Upstream commit bbf666c1 ] On some customer setups it was observed that shmem contains a non-zero fip MAC for 57711 which would lead to enabling of SW FCoE. Add a software workaround to clear the bad fip mac address if no FCoE connections are supported. Signed-off-by: NSudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: NAriel Elior <ariel.elior@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Taehee Yoo 提交于
[ Upstream commit d4e7df16 ] rbnode in insert_tree() is rcu protected pointer. So, in order to handle this pointer, _rcu function should be used. rb_link_node_rcu() is a rcu version of rb_link_node(). Fixes: 34848d5c ("netfilter: nf_conncount: Split insert and traversal") Signed-off-by: NTaehee Yoo <ap420073@gmail.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Florian Westphal 提交于
[ Upstream commit 542fbda0 ] The dst entry might already have a zero refcount, waiting on rcu list to be free'd. Using dst_hold() transitions its reference count to 1, and next dst release will try to free it again -- resulting in a double free: WARNING: CPU: 1 PID: 0 at include/net/dst.h:239 nf_xfrm_me_harder+0xe7/0x130 [nf_nat] RIP: 0010:nf_xfrm_me_harder+0xe7/0x130 [nf_nat] Code: 48 8b 5c 24 60 65 48 33 1c 25 28 00 00 00 75 53 48 83 c4 68 5b 5d 41 5c c3 85 c0 74 0d 8d 48 01 f0 0f b1 0a 74 86 85 c0 75 f3 <0f> 0b e9 7b ff ff ff 29 c6 31 d2 b9 20 00 48 00 4c 89 e7 e8 31 27 Call Trace: nf_nat_ipv4_out+0x78/0x90 [nf_nat_ipv4] nf_hook_slow+0x36/0xd0 ip_output+0x9f/0xd0 ip_forward+0x328/0x440 ip_rcv+0x8a/0xb0 Use dst_hold_safe instead and bail out if we cannot take a reference. Fixes: a4c2fd7f ("net: remove DST_NOCACHE flag") Reported-by: NMartin Zaharinov <micron10@gmail.com> Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Pan Bian 提交于
[ Upstream commit 708abf74 ] In the error handling block, nla_nest_cancel(skb, atd) is called to cancel the nest operation. But then, ipset_nest_end(skb, atd) is unexpected called to end the nest operation. This patch calls the ipset_nest_end only on the branch that nla_nest_cancel is not called. Fixes: 45040978 ("netfilter: ipset: Fix set:list type crash when flush/dump set in parallel") Signed-off-by: NPan Bian <bianpan2016@163.com> Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Ross Lagerwall 提交于
[ Upstream commit 96d1a731 ] When the VF driver does a reset, it (at least the Linux one) writes to the VFCTRL register to issue a reset and then immediately sends a reset message using the mailbox API. This is racy because when the PF driver detects that the VFCTRL register reset pin has been asserted, it clears the mailbox memory. Depending on ordering, the reset message sent by the VF could be cleared by the PF driver. It then responds to the cleared message with a NACK which causes the VF driver to malfunction. Fix this by deferring clearing the mailbox memory until the reset message is received. Fixes: 939b701a ("ixgbe: fix driver behaviour after issuing VFLR") Signed-off-by: NRoss Lagerwall <ross.lagerwall@citrix.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Stefan Assmann 提交于
[ Upstream commit 158daed1 ] A previous commit moved the ether_addr_copy() in i40e_set_mac() before the mac filter del/add to avoid a race. However it wasn't taken into account that this alters the mac address being handed to i40e_del_mac_filter(). Also changed i40e_add_mac_filter() to operate on netdev->dev_addr, hopefully that makes the code easier to read. Fixes: 458867b2 ("i40e: don't remove netdev->dev_addr when syncing uc list") Signed-off-by: NStefan Assmann <sassmann@kpanic.de> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Acked-by: NJacob Keller <jacob.e.keller@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Kirill A. Shutemov 提交于
[ Upstream commit 254eb550 ] The LDT remap placement has been changed. It's now placed before the direct mapping in the kernel virtual address space for both paging modes. Change address markers order accordingly. Fixes: d52888aa ("x86/mm: Move LDT remap out of KASLR region on 5-level paging") Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: bp@alien8.de Cc: hpa@zytor.com Cc: dave.hansen@linux.intel.com Cc: luto@kernel.org Cc: peterz@infradead.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Cc: bhe@redhat.com Cc: hans.van.kranenburg@mendix.com Cc: linux-mm@kvack.org Cc: xen-devel@lists.xenproject.org Link: https://lkml.kernel.org/r/20181130202328.65359-3-kirill.shutemov@linux.intel.comSigned-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Kirill A. Shutemov 提交于
[ Upstream commit 16877a55 ] There is a guard hole at the beginning of the kernel address space, also used by hypervisors. It occupies 16 PGD entries. This reserved range is not defined explicitely, it is calculated relative to other entities: direct mapping and user space ranges. The calculation got broken by recent changes of the kernel memory layout: LDT remap range is now mapped before direct mapping and makes the calculation invalid. The breakage leads to crash on Xen dom0 boot[1]. Define the reserved range explicitely. It's part of kernel ABI (hypervisors expect it to be stable) and must not depend on changes in the rest of kernel memory layout. [1] https://lists.xenproject.org/archives/html/xen-devel/2018-11/msg03313.html Fixes: d52888aa ("x86/mm: Move LDT remap out of KASLR region on 5-level paging") Reported-by: NHans van Kranenburg <hans.van.kranenburg@mendix.com> Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Tested-by: NHans van Kranenburg <hans.van.kranenburg@mendix.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Cc: bp@alien8.de Cc: hpa@zytor.com Cc: dave.hansen@linux.intel.com Cc: luto@kernel.org Cc: peterz@infradead.org Cc: boris.ostrovsky@oracle.com Cc: bhe@redhat.com Cc: linux-mm@kvack.org Cc: xen-devel@lists.xenproject.org Link: https://lkml.kernel.org/r/20181130202328.65359-2-kirill.shutemov@linux.intel.comSigned-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 YueHaibing 提交于
[ Upstream commit 8e41cae64b08fe2e86a9ffb88b295c6b4b3a3322 ] gcc warning this: drivers/net/ieee802154/ca8210.c:730:10: warning: comparison is always false due to limited range of data type [-Wtype-limits] 'len' is u8 type, we get it from buf[1] adding 2, which can overflow. This patch change the type of 'len' to unsigned int to avoid this,also fix the gcc warning. Fixes: ded845a7 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver") Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Signed-off-by: NStefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Thomas Falcon 提交于
[ Upstream commit 1d1bbc37 ] ibmvnic_reset allocated new reset work item objects in a non-atomic context. This can be called from a tasklet, generating the output below. Allocate work items with the GFP_ATOMIC flag instead. BUG: sleeping function called from invalid context at mm/slab.h:421 in_atomic(): 1, irqs_disabled(): 1, pid: 93, name: kworker/0:2 INFO: lockdep is turned off. irq event stamp: 66049 hardirqs last enabled at (66048): [<c000000000122468>] tasklet_action_common.isra.12+0x78/0x1c0 hardirqs last disabled at (66049): [<c000000000befce8>] _raw_spin_lock_irqsave+0x48/0xf0 softirqs last enabled at (66044): [<c000000000a8ac78>] dev_deactivate_queue.constprop.28+0xc8/0x160 softirqs last disabled at (66045): [<c0000000000306e0>] call_do_softirq+0x14/0x24 CPU: 0 PID: 93 Comm: kworker/0:2 Kdump: loaded Not tainted 4.20.0-rc6-00001-g1b50a8f03706 #7 Workqueue: events linkwatch_event Call Trace: [c0000003fffe7ae0] [c000000000bc83e4] dump_stack+0xe8/0x164 (unreliable) [c0000003fffe7b30] [c00000000015ba0c] ___might_sleep+0x2dc/0x320 [c0000003fffe7bb0] [c000000000391514] kmem_cache_alloc_trace+0x3e4/0x440 [c0000003fffe7c30] [d000000005b2309c] ibmvnic_reset+0x16c/0x360 [ibmvnic] [c0000003fffe7cc0] [d000000005b29834] ibmvnic_tasklet+0x1054/0x2010 [ibmvnic] [c0000003fffe7e00] [c0000000001224c8] tasklet_action_common.isra.12+0xd8/0x1c0 [c0000003fffe7e60] [c000000000bf1238] __do_softirq+0x1a8/0x64c [c0000003fffe7f90] [c0000000000306e0] call_do_softirq+0x14/0x24 [c0000003f3967980] [c00000000001ba50] do_softirq_own_stack+0x60/0xb0 [c0000003f39679c0] [c0000000001218a8] do_softirq+0xa8/0x100 [c0000003f39679f0] [c000000000121a74] __local_bh_enable_ip+0x174/0x180 [c0000003f3967a60] [c000000000bf003c] _raw_spin_unlock_bh+0x5c/0x80 [c0000003f3967a90] [c000000000a8ac78] dev_deactivate_queue.constprop.28+0xc8/0x160 [c0000003f3967ad0] [c000000000a8c8b0] dev_deactivate_many+0xd0/0x520 [c0000003f3967b70] [c000000000a8cd40] dev_deactivate+0x40/0x60 [c0000003f3967ba0] [c000000000a5e0c4] linkwatch_do_dev+0x74/0xd0 [c0000003f3967bd0] [c000000000a5e694] __linkwatch_run_queue+0x1a4/0x1f0 [c0000003f3967c30] [c000000000a5e728] linkwatch_event+0x48/0x60 [c0000003f3967c50] [c0000000001444e8] process_one_work+0x238/0x710 [c0000003f3967d20] [c000000000144a48] worker_thread+0x88/0x4e0 [c0000003f3967db0] [c00000000014e3a8] kthread+0x178/0x1c0 [c0000003f3967e20] [c00000000000bfd0] ret_from_kernel_thread+0x5c/0x6c Signed-off-by: NThomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Thomas Falcon 提交于
[ Upstream commit 6c5c7489 ] ibmvnic_reset can create and schedule a reset work item from an IRQ context, so do not use a mutex, which can sleep. Convert the reset work item mutex to a spin lock. Locking debugger generated the trace output below. BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908 in_atomic(): 1, irqs_disabled(): 1, pid: 120, name: kworker/8:1 4 locks held by kworker/8:1/120: #0: 0000000017c05720 ((wq_completion)"events"){+.+.}, at: process_one_work+0x188/0x710 #1: 00000000ace90706 ((linkwatch_work).work){+.+.}, at: process_one_work+0x188/0x710 #2: 000000007632871f (rtnl_mutex){+.+.}, at: rtnl_lock+0x30/0x50 #3: 00000000fc36813a (&(&crq->lock)->rlock){..-.}, at: ibmvnic_tasklet+0x88/0x2010 [ibmvnic] irq event stamp: 26293 hardirqs last enabled at (26292): [<c000000000122468>] tasklet_action_common.isra.12+0x78/0x1c0 hardirqs last disabled at (26293): [<c000000000befce8>] _raw_spin_lock_irqsave+0x48/0xf0 softirqs last enabled at (26288): [<c000000000a8ac78>] dev_deactivate_queue.constprop.28+0xc8/0x160 softirqs last disabled at (26289): [<c0000000000306e0>] call_do_softirq+0x14/0x24 CPU: 8 PID: 120 Comm: kworker/8:1 Kdump: loaded Not tainted 4.20.0-rc6 #6 Workqueue: events linkwatch_event Call Trace: [c0000003fffa7a50] [c000000000bc83e4] dump_stack+0xe8/0x164 (unreliable) [c0000003fffa7aa0] [c00000000015ba0c] ___might_sleep+0x2dc/0x320 [c0000003fffa7b20] [c000000000be960c] __mutex_lock+0x8c/0xb40 [c0000003fffa7c30] [d000000006202ac8] ibmvnic_reset+0x78/0x330 [ibmvnic] [c0000003fffa7cc0] [d0000000062097f4] ibmvnic_tasklet+0x1054/0x2010 [ibmvnic] [c0000003fffa7e00] [c0000000001224c8] tasklet_action_common.isra.12+0xd8/0x1c0 [c0000003fffa7e60] [c000000000bf1238] __do_softirq+0x1a8/0x64c [c0000003fffa7f90] [c0000000000306e0] call_do_softirq+0x14/0x24 [c0000003f3f87980] [c00000000001ba50] do_softirq_own_stack+0x60/0xb0 [c0000003f3f879c0] [c0000000001218a8] do_softirq+0xa8/0x100 [c0000003f3f879f0] [c000000000121a74] __local_bh_enable_ip+0x174/0x180 [c0000003f3f87a60] [c000000000bf003c] _raw_spin_unlock_bh+0x5c/0x80 [c0000003f3f87a90] [c000000000a8ac78] dev_deactivate_queue.constprop.28+0xc8/0x160 [c0000003f3f87ad0] [c000000000a8c8b0] dev_deactivate_many+0xd0/0x520 [c0000003f3f87b70] [c000000000a8cd40] dev_deactivate+0x40/0x60 [c0000003f3f87ba0] [c000000000a5e0c4] linkwatch_do_dev+0x74/0xd0 [c0000003f3f87bd0] [c000000000a5e694] __linkwatch_run_queue+0x1a4/0x1f0 [c0000003f3f87c30] [c000000000a5e728] linkwatch_event+0x48/0x60 [c0000003f3f87c50] [c0000000001444e8] process_one_work+0x238/0x710 [c0000003f3f87d20] [c000000000144a48] worker_thread+0x88/0x4e0 [c0000003f3f87db0] [c00000000014e3a8] kthread+0x178/0x1c0 [c0000003f3f87e20] [c00000000000bfd0] ret_from_kernel_thread+0x5c/0x6c Signed-off-by: NThomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Yussuf Khalil 提交于
[ Upstream commit ca5047286c9c93a01e1f471d00a6019536992954 ] Before commit 7fd6d98b ("i2c: i801: Allow ACPI AML access I/O ports not reserved for SMBus"), enabling RMI on the T560 would cause the touchpad to stop working after resuming from suspend. Now that this issue is fixed, RMI can be enabled safely and works fine. Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: NYussuf Khalil <dev@pp3345.net> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Tony Lindgren 提交于
[ Upstream commit e2ca26ec4f01486661b55b03597c13e2b9c18b73 ] With PM enabled, I noticed that pressing a key on the droid4 keyboard will block deeper idle states for the SoC. Let's fix this by using IRQF_ONESHOT and stop constantly toggling the device OMAP4_KBD_IRQENABLE register as suggested by Dmitry Torokhov <dmitry.torokhov@gmail.com>. From the hardware point of view, looks like we need to manage the registers for OMAP4_KBD_IRQENABLE and OMAP4_KBD_WAKEUPENABLE together to avoid blocking deeper SoC idle states. And with toggling of OMAP4_KBD_IRQENABLE register now gone with IRQF_ONESHOT, also the SoC idle state problem is gone during runtime. We still also need to clear OMAP4_KBD_WAKEUPENABLE in omap4_keypad_close() though to pair it with omap4_keypad_open() to prevent blocking deeper SoC idle states after rmmod omap4-keypad. Reported-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Dan Carpenter 提交于
[ Upstream commit 9ae4f8420ed7be4b13c96600e3568c144d101a23 ] If "interface" is NULL then we can't release it and trying to will only lead to an Oops. Fixes: aea71a02 ("[SCSI] bnx2fc: Introduce interface structure for each vlan interface") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Himanshu Madhani 提交于
[ Upstream commit c64a87f9518409d0a439895f09f6149ffdd427b8 ] This reverts commit db186382af21e926e90df19499475f2552192b77. This commit introduced regression with FCP discovery so revert it to fix discovery for FCP luns. Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Florian Westphal 提交于
[ Upstream commit 530aad77 ] When adjusting sack block sequence numbers, skb_make_writable() gets called to make sure tcp options are all in the linear area, and buffer is not shared. This can cause tcp header pointer to get reallocated, so we must reaload it to avoid memory corruption. This bug pre-dates git history. Reported-by: NNeel Mehta <nmehta@google.com> Reported-by: NShane Huntley <shuntley@google.com> Reported-by: NHeather Adkins <argv@google.com> Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Taehee Yoo 提交于
[ Upstream commit 4c05ec47 ] basechain->stats is rcu protected data which is updated from nft_chain_stats_replace(). This function is executed from the commit phase which holds the pernet nf_tables commit mutex - not the global nfnetlink subsystem mutex. Test commands to reproduce the problem are: %iptables-nft -I INPUT %iptables-nft -Z %iptables-nft -Z This patch uses RCU calls to handle basechain->stats updates to fix a splat that looks like: [89279.358755] ============================= [89279.363656] WARNING: suspicious RCU usage [89279.368458] 4.20.0-rc2+ #44 Tainted: G W L [89279.374661] ----------------------------- [89279.379542] net/netfilter/nf_tables_api.c:1404 suspicious rcu_dereference_protected() usage! [...] [89279.406556] 1 lock held by iptables-nft/5225: [89279.411728] #0: 00000000bf45a000 (&net->nft.commit_mutex){+.+.}, at: nf_tables_valid_genid+0x1f/0x70 [nf_tables] [89279.424022] stack backtrace: [89279.429236] CPU: 0 PID: 5225 Comm: iptables-nft Tainted: G W L 4.20.0-rc2+ #44 [89279.430135] Call Trace: [89279.430135] dump_stack+0xc9/0x16b [89279.430135] ? show_regs_print_info+0x5/0x5 [89279.430135] ? lockdep_rcu_suspicious+0x117/0x160 [89279.430135] nft_chain_commit_update+0x4ea/0x640 [nf_tables] [89279.430135] ? sched_clock_local+0xd4/0x140 [89279.430135] ? check_flags.part.35+0x440/0x440 [89279.430135] ? __rhashtable_remove_fast.constprop.67+0xec0/0xec0 [nf_tables] [89279.430135] ? sched_clock_cpu+0x126/0x170 [89279.430135] ? find_held_lock+0x39/0x1c0 [89279.430135] ? hlock_class+0x140/0x140 [89279.430135] ? is_bpf_text_address+0x5/0xf0 [89279.430135] ? check_flags.part.35+0x440/0x440 [89279.430135] ? __lock_is_held+0xb4/0x140 [89279.430135] nf_tables_commit+0x2555/0x39c0 [nf_tables] Fixes: f102d66b ("netfilter: nf_tables: use dedicated mutex to guard transactions") Signed-off-by: NTaehee Yoo <ap420073@gmail.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-