bcmgenet_mii_setup() is called from the PHY state machine every 1-2 seconds
when the PHYs are in PHY_POLL mode.

Improve bcmgenet_mii_setup() so that it touches the MAC registers only when
the link is up and there was a change to link, speed, duplex, or pause status.
Signed-off-by: NPetri Gynther <pgynther@google.com>
Tested-by: NFlorian Fainelli <f.fainelli@gmail.com>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Walter Lozano says:

====================
Altera TSE with no PHY

In some scenarios there is no PHY chip present, for example in optical links.
This serie of patches moves PHY get addr and MDIO create to a new function and
avoids PHY and MDIO probing in these cases.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch avoids PHY and MDIO probing if no PHY chip is present.
This is the case mainly in optical links where there is no need for
PHY chip, and therefore no need of MDIO. In this scenario Ethernet
MAC is directly connected to an optical module through an external
SFP transceiver.
Signed-off-by: NWalter Lozano <walter@vanguardiasur.com.ar>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move PHY get addr and MDIO create to a new function to improve readability
and make it easier to avoid its usage. This will be useful for example in
the case where there is no PHY chip.
Signed-off-by: NWalter Lozano <walter@vanguardiasur.com.ar>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'master-2014-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next

John W. Linville says:

====================
pull request: wireless-next 2014-10-03

Please pull tihs batch of updates intended for the 3.18 stream!

For the iwlwifi bits, Emmanuel says:

"I have here a few things that depend on the latest mac80211's changes:
RRM, TPC, Quiet Period etc...  Eyal keeps improving our rate control
and we have a new device ID. This last patch should probably have
gone to wireless.git, but at that stage, I preferred to send it to
-next and CC stable."

For (most of) the Atheros bits, Kalle says:

"The only new feature is testmode support from me. Ben added a new method
to crash the firmware with an assert for debug purposes. As usual, we
have lots of smaller fixes from Michal. Matteo fixed a Kconfig
dependency with debugfs. I fixed some warnings recently added to
checkpatch."

For the NFC bits, Samuel says:

"We've had major updates for TI and ST Microelectronics drivers, and a
few NCI related changes.

For TI's trf7970a driver:

- Target mode support for trf7970a
- Suspend/resume support for trf7970a
- DT properties additions to handle different quirks
- A bunch of fixes for smartphone IOP related issues

For ST Microelectronics' ST21NFCA and ST21NFCB drivers:

- ISO15693 support for st21nfcb
- checkpatch and sparse related warning fixes
- Code cleanups and a few minor fixes

Finally, Marvell added ISO15693 support to the NCI stack, together with a
couple of NCI fixes."

For the Bluetooth bits, Johan says:

"This 3.18 pull request replaces the one I did on Monday ("bluetooth-next
2014-09-22", which hasn't been pulled yet). The additions since the last
request are:

 - SCO connection fix for devices not supporting eSCO
 - Cleanups regarding the SCO establishment logic
 - Remove unnecessary return value from logging functions
 - Header compression fix for 6lowpan
 - Cleanups to the ieee802154/mrf24j40 driver

Here's a copy from previous request that this one replaces:

'
Here are some more patches for 3.18. They include various fixes to the
btusb HCI driver, a fix for LE SMP, as well as adding Jukka to the
MAINTAINERS file for generic 6LoWPAN (as requested by Alexander Aring).

I've held on to this pull request a bit since we were waiting for a SCO
related fix to get sorted out first. However, since the merge window is
getting closer I decided not to wait for it. If we do get the fix sorted
out there'll probably be a second small pull request later this week.
'"

And,

"Unless 3.17 gets delayed this will probably be our last -next pull request for
3.18. We've got:

  - New Marvell hardware supportr
  - Multicast support for 6lowpan
  - Several of 6lowpan fixes & cleanups
  - Fix for a (false-positive) lockdep warning in L2CAP
  - Minor btusb cleanup"

On top of all that comes the usual sort of updates to ath5k, ath9k,
ath10k, brcmfmac, mwifiex, and wil6210.  This time around there are
also a number of rtlwifi updates to enable some new hardware and
to reconcile the in-kernel drivers with some newer releases of the
Realtek vendor drivers.  Also of note is some device tree work for
the bcma bus.

Please let me know if there are problems!
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter/IPVS updates for net-next

The following patchset contains another batch with Netfilter/IPVS updates
for net-next, they are:

1) Add abstracted ICMP codes to the nf_tables reject expression. We
   introduce four reasons to reject using ICMP that overlap in IPv4
   and IPv6 from the semantic point of view. This should simplify the
   maintainance of dual stack rule-sets through the inet table.

2) Move nf_send_reset() functions from header files to per-family
   nf_reject modules, suggested by Patrick McHardy.

3) We have to use IS_ENABLED(CONFIG_BRIDGE_NETFILTER) everywhere in the
   code now that br_netfilter can be modularized. Convert remaining spots
   in the network stack code.

4) Use rcu_barrier() in the nf_tables module removal path to ensure that
   we don't leave object that are still pending to be released via
   call_rcu (that may likely result in a crash).

5) Remove incomplete arch 32/64 compat from nft_compat. The original (bad)
   idea was to probe the word size based on the xtables match/target info
   size, but this assumption is wrong when you have to dump the information
   back to userspace.

6) Allow to filter from prerouting and postrouting in the nf_tables bridge.
   In order to emulate the ebtables NAT chains (which are actually simple
   filter chains with no special semantics), we have support filtering from
   this hooks too.

7) Add explicit module dependency between xt_physdev and br_netfilter.
   This provides a way to detect if the user needs br_netfilter from
   the configuration path. This should reduce the breakage of the
   br_netfilter modularization.

8) Cleanup coding style in ip_vs.h, from Simon Horman.

9) Fix crash in the recently added nf_tables masq expression. We have
   to register/unregister the notifiers to clean up the conntrack table
   entries from the module init/exit path, not from the rule addition /
   deletion path. From Arturo Borrero.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Vladislav Yasevich says:

====================
bridge: Add vlan filtering support for default pvid

This series adds default pvid support to vlan filtering in the bridge.
VLAN 1 (as recommended by 802.1q spec) is used as default pvid on ports.
Then the user can over-ride this configuration by configuring their
own vlan information.
The user can additionally change the default value through the
sysfs interface (netlink coming shortly).
The user can turn off default pvid functionality by setting default
pvid to 0.
This series changes the default behavior of the bridge when
vlan filtering is turned on.  Currently, ports without any vlan
filtering configured will not recevie any traffic at all.  This patch
changes the behavior of the above ports to receive only untagged traffic.

Since v3:
- allocated 'changed' bitmap on the heap and re-arrange code to clean it up.
- remove extra blank lines.
- Fix patch1 to build by itself.
- Fix error recover to not add vlan 0.
- Restructure nbp_vlan_init to remove uneeded variable.

Since v2:
- Fix handling of invalid values in sysfs interface.
- Add some additional log messages.
- Fix default_pvid handling when vlan filtering is compiled out.
- Fix sparse issues with new code.
- Fix how we located the old default pvid (added a helper function).

Since v1:
- Add ability to turn off default_pvid settings.
- Drop the automiatic filtering support based on configured vlan devices (will
  be its own series)
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently when vlan filtering is turned on on the bridge, the bridge
will drop all traffic untill the user configures the filter.  This
isn't very nice for ports that don't care about vlans and just
want untagged traffic.

A concept of a default_pvid was recently introduced.  This patch
adds filtering support for default_pvid.   Now, ports that don't
care about vlans and don't define there own filter will belong
to the VLAN of the default_pvid and continue to receive untagged
traffic.

This filtering can be disabled by setting default_pvid to 0.
Signed-off-by: NVladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, if the pvid is not set, we return an illegal vlan value
even though the pvid value is set to 0.  Since pvid of 0 is currently
invalid, just return 0 instead.  This makes the current and future
checks simpler.
Signed-off-by: NVladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch allows the user to set and retrieve default_pvid
value.  A new value can only be stored when vlan filtering
is disabled.
Signed-off-by: NVladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signedness bugs may occur when using signed char for bitops,
depending on if the highest bit is ever used.
Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Tilman Schmidt says:

====================
ISDN patches for net-next

Here's a series of patches for the ISDN CAPI subsystem and the
Gigaset ISDN driver.  Please merge via net-next.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use function usb_endpoint_num() for the bulk endpoint and store
the endpoint number in the cardstate structure instead of the raw
endpoint address value.
Signed-off-by: NTilman Schmidt <tilman@imap.cc>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Field int_in_endpointAddr was set but never used. Drop it.
Signed-off-by: NTilman Schmidt <tilman@imap.cc>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Avoid cascading warnings when leaving DLE mode fails by clearing
the DLE flag before entering recovery.
Signed-off-by: NTilman Schmidt <tilman@imap.cc>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The last branch in command_2_index() cannot be reached since
c==0xff is already caught by the first "if".
The empty second branch makes no difference since no other branch
will be taken for c<0x0f.
Signed-off-by: NTilman Schmidt <tilman@imap.cc>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Suspicious RCU usage in qdisc_watchdog call needs to be done inside
rcu_read_lock/rcu_read_unlock. And then Qdisc destroy operations
need to ensure timer is cancelled before removing qdisc structure.

[ 3992.191339] ===============================
[ 3992.191340] [ INFO: suspicious RCU usage. ]
[ 3992.191343] 3.17.0-rc6net-next+ #72 Not tainted
[ 3992.191345] -------------------------------
[ 3992.191347] include/net/sch_generic.h:272 suspicious rcu_dereference_check() usage!
[ 3992.191348]
[ 3992.191348] other info that might help us debug this:
[ 3992.191348]
[ 3992.191351]
[ 3992.191351] rcu_scheduler_active = 1, debug_locks = 1
[ 3992.191353] no locks held by swapper/1/0.
[ 3992.191355]
[ 3992.191355] stack backtrace:
[ 3992.191358] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.17.0-rc6net-next+ #72
[ 3992.191360] Hardware name:                  /DZ77RE-75K, BIOS GAZ7711H.86A.0060.2012.1115.1750 11/15/2012
[ 3992.191362]  0000000000000001 ffff880235803e48 ffffffff8178f92c 0000000000000000
[ 3992.191366]  ffff8802322224a0 ffff880235803e78 ffffffff810c9966 ffff8800a5fe3000
[ 3992.191370]  ffff880235803f30 ffff8802359cd768 ffff8802359cd6e0 ffff880235803e98
[ 3992.191374] Call Trace:
[ 3992.191376]  <IRQ>  [<ffffffff8178f92c>] dump_stack+0x4e/0x68
[ 3992.191387]  [<ffffffff810c9966>] lockdep_rcu_suspicious+0xe6/0x130
[ 3992.191392]  [<ffffffff8167213a>] qdisc_watchdog+0x8a/0xb0
[ 3992.191396]  [<ffffffff810f93f2>] __run_hrtimer+0x72/0x420
[ 3992.191399]  [<ffffffff810f9bcd>] ? hrtimer_interrupt+0x7d/0x240
[ 3992.191403]  [<ffffffff816720b0>] ? tc_classify+0xc0/0xc0
[ 3992.191406]  [<ffffffff810f9c4f>] hrtimer_interrupt+0xff/0x240
[ 3992.191410]  [<ffffffff8109e4a5>] ? __atomic_notifier_call_chain+0x5/0x140
[ 3992.191415]  [<ffffffff8103577b>] local_apic_timer_interrupt+0x3b/0x60
[ 3992.191419]  [<ffffffff8179c2b5>] smp_apic_timer_interrupt+0x45/0x60
[ 3992.191422]  [<ffffffff8179a6bf>] apic_timer_interrupt+0x6f/0x80
[ 3992.191424]  <EOI>  [<ffffffff815ed233>] ? cpuidle_enter_state+0x73/0x2e0
[ 3992.191432]  [<ffffffff815ed22e>] ? cpuidle_enter_state+0x6e/0x2e0
[ 3992.191437]  [<ffffffff815ed567>] cpuidle_enter+0x17/0x20
[ 3992.191441]  [<ffffffff810c0741>] cpu_startup_entry+0x3d1/0x4a0
[ 3992.191445]  [<ffffffff81106fc6>] ? clockevents_config_and_register+0x26/0x30
[ 3992.191448]  [<ffffffff81033c16>] start_secondary+0x1b6/0x260

Fixes: b26b0d1e ("net: qdisc: use rcu prefix and silence sparse warnings")
Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Acked-by: NCong Wang <cwang@twopensource.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit f7f1de51 ("net: dsa: start and stop the PHY state machine")
add calls to phy_start() in dsa_slave_open() respectively phy_stop() in
dsa_slave_close().

We also call phy_start_aneg() in dsa_slave_create(), and this call is
messing up with the PHY state machine, since we basically start the
auto-negotiation, and later on restart it when calling phy_start().
phy_start() does not currently handle the PHY_FORCING or PHY_AN states
properly, but such a fix would be too invasive for this window.

Fixes: f7f1de51 ("net: dsa: start and stop the PHY state machine")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

the inet6 state INET6_IFADDR_STATE_UP only appeared in its definition.

Cc: Christoph Paasch <christoph.paasch@uclouvain.be>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSébastien Barré <sebastien.barre@uclouvain.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

SKB_FCLONE_UNAVAILABLE has overloaded meaning depending on type of skb.
1: If skb is allocated from head_cache, it indicates fclone is not available.
2: If skb is a companion fclone skb (allocated from fclone_cache), it indicates
it is available to be used.

To avoid confusion for case 2 above, this patch  replaces
SKB_FCLONE_UNAVAILABLE with SKB_FCLONE_FREE where appropriate. For fclone
companion skbs, this indicates it is free for use.

SKB_FCLONE_UNAVAILABLE will now simply indicate skb is from head_cache and
cannot / will not have a companion fclone.
Signed-off-by: NVijay Subramanian <subramanian.vijay@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ethtool -S reports a new counter, tracking number of time doorbell
was not triggered, because skb->xmit_more was set.

$ ethtool -S eth0 | egrep "tx_packet|xmit_more"
     tx_packets: 2413288400
     xmit_more: 666121277

I merged the tso_packet false sharing avoidance in this patch as well.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Tom Herbert says:

====================
net: Generic UDP Encapsulation

Generic UDP Encapsulation (GUE) is UDP encapsulation protocol which
encapsulates packets of various IP protocols. The GUE protocol is
described in http://tools.ietf.org/html/draft-herbert-gue-01.

The receive path of GUE is implemented in the FOU over UDP module (FOU).
This includes a UDP encap receive function for GUE as well as GUE
specific GRO functions. Management and configuration of GUE ports shares
most of the same code with FOU.

For the transmit path, the previous FOU support for IPIP, sit, and GRE
was simply extended for GUE (when GUE is enabled insert the GUE
header on transmit in addition to UDP header inserted for FOU).

Semantically GUE is the same as FOU in that the encapsulation (UDP
and GUE headers) that are inserted on transmission and removed on
reception so that IP packet is processed with the inner header.

This patch set includes:
 - Some fixes to FOU, removal of IPv4,v6 specific GRO functions
 - Support to configure a GUE receive port
 - Implementation of GUE receive path (normal and GRO)
 - Additions to ip_tunnel netlink to configure GUE
 - GUE header inserion in ip_tunnel transmit path

v2:
 - Include net/gue.h in patch set

Testing:

I ran performance numbers using netperf TCP_RR with 200 streams,
comparing encapsulation without GUE, encapsulation with GUE, and
encapsulation with FOU.

 GRE
    TCP_STREAM
      IPv4, FOU, UDP checksum enabled
        14.04% TX CPU utilization
        13.17% RX CPU utilization
        9211 Mbps
      IPv4, GUE, UDP checksum enabled
        14.99% TX CPU utilization
        13.79% RX CPU utilization
        9185 Mbps
      IPv4, FOU, UDP checksum disabled
        13.14% TX CPU utilization
        23.18% RX CPU utilization
        9277 Mbps
      IPv4, GUE, UDP checksum disabled
        13.66% TX CPU utilization
        23.57% RX CPU utilization
        9184 Mbps
    TCP_RR
      IPv4, FOU, UDP checksum enabled
        94.2% CPU utilization
        155/249/460 90/95/99% latencies
        1.17018e+06 tps
      IPv4, GUE, UDP checksum enabled
        93.9% CPU utilization
        158/253/472 90/95/99% latencies
        1.15045e+06 tps

  IPIP
    TCP_STREAM
      FOU, UDP checksum enabled
        15.28% TX CPU utilization
        13.92% RX CPU utilization
        9342 Mbps
      GUE, UDP checksum enabled
        13.99% TX CPU utilization
        13.34% RX CPU utilization
        9210 Mbps
      FOU, UDP checksum disabled
        15.08% TX CPU utilization
        24.64% RX CPU utilization
        9226 Mbps
      GUE, UDP checksum disabled
        15.90% TX CPU utilization
        24.77% RX CPU utilization
        9197 Mbps
    TCP_RR
      FOU, UDP checksum enabled
        94.23% CPU utilization
        149/237/429 90/95/99% latencies
        1.19553e+06 tps
      GUE, UDP checksum enabled
        93.75% CPU utilization
        152/243/442 90/95/99% latencies
        1.17027e+06 tps

  SIT
    TCP_STREAM
      FOU, UDP checksum enabled
        14.47% TX CPU utilization
        14.58% RX CPU utilization
        9106 Mbps
      GUE, UDP checksum enabled
        15.09% TX CPU utilization
        14.84% RX CPU utilization
        9080 Mbps
      FOU, UDP checksum disabled
        15.70% TX CPU utilization
        27.93% RX CPU utilization
        9097 Mbps
      GUE, UDP checksum disabled
        15.04% TX CPU utilization
        27.54% RX CPU utilization
        9073 Mbps
    TCP_RR
      FOU, UDP checksum enabled
        96.9% CPU utilization
        170/281/581 90/95/99% latencies
        1.03372e+06 tps
      GUE, UDP checksum enabled
        97.16% CPU utilization
        172/286/576 90/95/99% latencies
        1.00469e+06 tps
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch allows configuring IPIP, sit, and GRE tunnels to use GUE.
This is very similar to fou excpet that we need to insert the GUE header
in addition to the UDP header on transmit.
Signed-off-by: NTom Herbert <therbert@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support receiving for GUE packets in the fou module. The
fou module now supports direct foo-over-udp (no encapsulation header)
and GUE. To support this a type parameter is added to the fou netlink
parameters.

For a GUE socket we define gue_udp_recv, gue_gro_receive, and
gue_gro_complete to handle the specifics of the GUE protocol. Most
of the code to manage and configure sockets is common with the fou.
Signed-off-by: NTom Herbert <therbert@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch removes fou[46]_gro_receive and fou[46]_gro_complete
functions. The v4 or v6 variants were chosen for the UDP offloads
based on the address family of the socket this is not necessary
or correct. Alternatively, this patch adds is_ipv6 to napi_gro_skb.
This is set in udp6_gro_receive and unset in udp4_gro_receive. In
fou_gro_receive the value is used to select the correct inet_offloads
for the protocol of the outer IP header.
Signed-off-by: NTom Herbert <therbert@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When adjusting max_header for the tunnel interface based on egress
device we need to account for any extra bytes in secondary encapsulation
(e.g. FOU).
Signed-off-by: NTom Herbert <therbert@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

skb_gro_receive() is only called from tcp_gro_receive() which is
not in a module.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

SH_IRDA needs HAS_IOMEM, so depend on it. The related error(with
allmodconfig under um):

    CC [M]  drivers/net/irda/sh_irda.o
  drivers/net/irda/sh_irda.c: In function ‘sh_irda_probe’:
  drivers/net/irda/sh_irda.c:776:2: error: implicit declaration of function ‘ioremap_nocache’ [-Werror=implicit-function-declaration]
    self->membase = ioremap_nocache(res->start, resource_size(res));
    ^
  drivers/net/irda/sh_irda.c:776:16: warning: assignment makes pointer from integer without a cast [enabled by default]
    self->membase = ioremap_nocache(res->start, resource_size(res));
                  ^
  drivers/net/irda/sh_irda.c:821:2: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration]
    iounmap(self->membase);
    ^
Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

PXA168_ETH need HAS_IOMEM, so depend on it, the related error (with
allmodconfig under um):

    CC [M]  drivers/net/ethernet/marvell/pxa168_eth.o
  drivers/net/ethernet/marvell/pxa168_eth.c: In function ‘pxa168_eth_probe’:
  drivers/net/ethernet/marvell/pxa168_eth.c:1605:2: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration]
    iounmap(pep->base);
    ^
Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

NET_DSA_BCM_SF2 need HAS_IOMEM, so depend on it, the related error (with
allmodconfig under um):

    CC [M]  drivers/net/dsa/bcm_sf2.o
  drivers/net/dsa/bcm_sf2.c: In function ‘bcm_sf2_sw_setup’:
  drivers/net/dsa/bcm_sf2.c:487:3: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration]
     iounmap(*base);
     ^
Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

CAN_AT91 needs HAS_IOMEM, so depends on it. The related error (with
allmodconfig under um):

    CC [M]  drivers/net/can/at91_can.o
  drivers/net/can/at91_can.c: In function ‘at91_can_probe’:
  drivers/net/can/at91_can.c:1329:2: error: implicit declaration of function ‘ioremap_nocache’ [-Werror=implicit-function-declaration]
  addr = ioremap_nocache(res->start, resource_size(res));
    ^
  drivers/net/can/at91_can.c:1329:7: warning: assignment makes pointer from integer without a cast [enabled by default]
    addr = ioremap_nocache(res->start, resource_size(res));
         ^
  drivers/net/can/at91_can.c:1384:2: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration]
    iounmap(addr);
    ^
Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2014-10-02

This series contains updates to fm10k, igb, ixgbe and i40e.

Alex provides two updates to the fm10k driver.  First reduces the buffer
size to 2k for all page sizes, since most frames only have a 1500 MTU
so supporting a buffer size larger than this is somewhat wasteful.
Second fixes an issue where the number of transmit queues was not being
updated, so added the lines necessary to update the number of transmit
queues.

Rick Jones provides two patches to convert ixgbe, igb and i40e to use
dev_consume_skb_any().

Emil provides two patches for ixgbe, first cleans up a couple of wait
loops on auto-negotiation that were not needed.  Second fixes an issue
reported by Fujitsu/Red Hat, which consolidates the logic behind the
dynamically setting of TXDCTL.WTHRESH depending on interrupt throttle
rate (ITR) setting regardless of BQL.

Ethan Zhao provides a cleanup patch for ixgbe where he noticed a
duplicate define.

Bernhard Kaindl provides a patch for igb to remove a source of latency
spikes by not calling code that uses mdelay() for feeding a PHY stat
while being called with a spinlock held.

Todd bumps the igb version based on the recent changes.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eli Cohen says:

====================
mlx5 update for 3.18

This series integrates a new mechanism for populating and extracting field values
used in the driver/firmware interaction around command mailboxes.

Changes from V1:
 - Remove unused definition of memcpy_cpu_to_be32()
 - Remove definitions of non_existent_*() and use BUILD_BUG_ON() instead.
 - Added a patch one line patch to add support for ConnectX-4 devices.

Changes from V0:
 - trimmed the auto-generated file to a minimum, as required by the reviewers.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add the upcoming ConnectX-4 device to the list of supported devices by then
mlx5 driver.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch puts a common part as the first field of mlx5_core_qp. This field is
used to identify which resource generated an event. This is required since upcoming
new resource types such as DC targets are allocated for the same numerical space
as regular QPs and may generate the same events. By searching the resource in the
same table we can then look at the common field to identify the resource.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Transform device capabilities related commands to use set/get macros to
manipulate command mailboxes.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add an auto generated header file that describes hardware registers along with
set of macros that set/get values. The macros do static checks to avoid
overflow, handle endianess, and overall provide a clean way to code commands.
Currently the header file is small and we will add structs as we make use of
the macros.
A few commands were removed from the commands enum since they are not supported
currently and will be added when support is available.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rearrange struct mlx5_caps so it has a "gen" field to represent the current
capabilities configured for the device. Max capabilities can also be queried
from the device. Also update capabilities struct to contain more fields as per
the latest revision if firmware specification.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Validation of skb can be pretty expensive :

GSO segmentation and/or checksum computations.

We can do this without holding qdisc lock, so that other cpus
can queue additional packets.

Trick is that requeued packets were already validated, so we carry
a boolean so that sch_direct_xmit() can validate a fresh skb list,
or directly use an old one.

Tested on 40Gb NIC (8 TX queues) and 200 concurrent flows, 48 threads
host.

Turning TSO on or off had no effect on throughput, only few more cpu
cycles. Lock contention on qdisc lock disappeared.

Same if disabling TX checksum offload.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no need to call ether_setup after alloc_ethdev since it was
already called there.

Follow commits c706471b ("net: axienet: remove unnecessary
ether_setup after alloc_etherdev") and 3c87dcbf ("net: ll_temac:
Remove unnecessary ether_setup after alloc_etherdev") and fix the
pattern in all remaining ethernet drivers.
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>