- 14 4月, 2012 5 次提交
-
-
由 Sachin Kamat 提交于
Add config dependency for Exynos4 and Exynos5 device tree enabled machine files on config options ARCH_EXYNOS4 and ARCH_EXYNOS5 respectively. Enabling machine support without proper ARCH support enabled is incorrect. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Marek Szyprowski 提交于
The atmel_mxt_ts driver has been extended to support more 'configuration objects' in commit 81c88a71 ("Input: atmel_mxt_ts - update object list"), what broke the configuration values for NURI board. These values are optional anyway, so remove them to get the driver working correctly. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Marek Szyprowski 提交于
On some versions of NURI and UniversalC210 boards, camera clocks are routed directly to xusbxti clock source. This patch sets the correct value for this clock to let usb and camera sensors to work correctly and avoid division by zero on driver's probe. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Marek Szyprowski 提交于
Regulator names should not contain slash to avoid issues with debugfs. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Maurus Cuelenaere 提交于
When selecting SAMSUNG_PM_DEBUG, it complains about a missing printascii() function if you do not select DEBUG_LL, so make the former select the latter. Signed-off-by: NMaurus Cuelenaere <mcuelenaere@gmail.com> Acked-by: NHeiko Stuebner <heiko@sntech.de> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 10 4月, 2012 2 次提交
-
-
由 Thomas Abraham 提交于
Add PDMA and MDMA physical base address macros which is require for EXYNOS5 of_dev_auxdata setup. Signed-off-by: NThomas Abraham <thomas.ab@samsung.com> [kgene.kim@samsung.com: changed dma channel fo mdma1] Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Sachin Kamat 提交于
Fixes the following warning: warning: 'dma_dmamask' defined but not used [-Wunused-variable] Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 09 4月, 2012 3 次提交
-
-
由 Jonghwan Choi 提交于
This patch is omitted in v2 patch of Jaecheol Lee. drivers/cpufreq/exynos5250-cpufreq.c: In function 'set_clkdiv': drivers/cpufreq/exynos5250-cpufreq.c:144: error: 'EXYNOS5_CLKDIV_STATCPU0' undeclared (first use in this function) drivers/cpufreq/exynos5250-cpufreq.c:144: error: (Each undeclared identifier is reported only once drivers/cpufreq/exynos5250-cpufreq.c:144: error: for each function it appears in.) drivers/cpufreq/exynos5250-cpufreq.c:150: error: 'EXYNOS5_CLKDIV_CPU1' undeclared (first use in this function) drivers/cpufreq/exynos5250-cpufreq.c:152: error: 'EXYNOS5_CLKDIV_STATCPU1' undeclared (first use in this function) drivers/cpufreq/exynos5250-cpufreq.c: In function 'set_apll': drivers/cpufreq/exynos5250-cpufreq.c:166: error: 'EXYNOS5_CLKMUX_STATCPU' undeclared (first use in this function) drivers/cpufreq/exynos5250-cpufreq.c:173: error: 'EXYNOS5_APLL_LOCK' undeclared (first use in this function) drivers/cpufreq/exynos5250-cpufreq.c: In function 'exynos5250_cpufreq_init': drivers/cpufreq/exynos5250-cpufreq.c:312: error: 'EXYNOS5_CLKDIV_CPU1' undeclared (first use in this function) Cc: Jaecheol Lee <jc.lee@samsung.com> Signed-off-by: NJonghwan Choi <jhbird.choi@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Tushar Behera 提交于
This fixes following build error when sound support is selected on EXYNOS4 platform. sound/soc/samsung/idma.c: In function ‘idma_close’: sound/soc/samsung/idma.c:327:11: error: ‘IRQ_I2S0’ undeclared (first use in this function) Signed-off-by: NTushar Behera <tushar.behera@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
According to commit 719a4240("mfd: Remove unused LDO supply field from WM8994 pdata"), the LDO supply field should be removed from the initializer. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 07 4月, 2012 3 次提交
-
-
由 Linus Torvalds 提交于
I have a new optimized x86 "strncpy_from_user()" that will use these same helper functions for all the same reasons the name lookup code uses them. This is preparation for that. This moves them into an architecture-specific header file. It's architecture-specific for two reasons: - some of the functions are likely to want architecture-specific implementations. Even if the current code happens to be "generic" in the sense that it should work on any little-endian machine, it's likely that the "multiply by a big constant and shift" implementation is less than optimal for an architecture that has a guaranteed fast bit count instruction, for example. - I expect that if architectures like sparc want to start playing around with this, we'll need to abstract out a few more details (in particular the actual unaligned accesses). So we're likely to have more architecture-specific stuff if non-x86 architectures start using this. (and if it turns out that non-x86 architectures don't start using this, then having it in an architecture-specific header is still the right thing to do, of course) Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Srivatsa S. Bhat 提交于
There is an extra and unnecessary call to smp_processor_id() in cpu_bringup(). Remove it. Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
The above mentioned patch checks the IOAPIC and if it contains -1, then it unmaps said IOAPIC. But under Xen we get this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000040 IP: [<ffffffff8134e51f>] xen_irq_init+0x1f/0xb0 PGD 0 Oops: 0002 [#1] SMP CPU 0 Modules linked in: Pid: 1, comm: swapper/0 Not tainted 3.2.10-3.fc16.x86_64 #1 Dell Inc. Inspiron 1525 /0U990C RIP: e030:[<ffffffff8134e51f>] [<ffffffff8134e51f>] xen_irq_init+0x1f/0xb0 RSP: e02b: ffff8800d42cbb70 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 00000000ffffffef RCX: 0000000000000001 RDX: 0000000000000040 RSI: 00000000ffffffef RDI: 0000000000000001 RBP: ffff8800d42cbb80 R08: ffff8800d6400000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 00000000ffffffef R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000010 FS: 0000000000000000(0000) GS:ffff8800df5fe000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0:000000008005003b CR2: 0000000000000040 CR3: 0000000001a05000 CR4: 0000000000002660 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper/0 (pid: 1, threadinfo ffff8800d42ca000, task ffff8800d42d0000) Stack: 00000000ffffffef 0000000000000010 ffff8800d42cbbe0 ffffffff8134f157 ffffffff8100a9b2 ffffffff8182ffd1 00000000000000a0 00000000829e7384 0000000000000002 0000000000000010 00000000ffffffff 0000000000000000 Call Trace: [<ffffffff8134f157>] xen_bind_pirq_gsi_to_irq+0x87/0x230 [<ffffffff8100a9b2>] ? check_events+0x12+0x20 [<ffffffff814bab42>] xen_register_pirq+0x82/0xe0 [<ffffffff814bac1a>] xen_register_gsi.part.2+0x4a/0xd0 [<ffffffff814bacc0>] acpi_register_gsi_xen+0x20/0x30 [<ffffffff8103036f>] acpi_register_gsi+0xf/0x20 [<ffffffff8131abdb>] acpi_pci_irq_enable+0x12e/0x202 [<ffffffff814bc849>] pcibios_enable_device+0x39/0x40 [<ffffffff812dc7ab>] do_pci_enable_device+0x4b/0x70 [<ffffffff812dc878>] __pci_enable_device_flags+0xa8/0xf0 [<ffffffff812dc8d3>] pci_enable_device+0x13/0x20 The reason we are dying is b/c the call acpi_get_override_irq() is used, which returns the polarity and trigger for the IRQs. That function calls mp_find_ioapics to get the 'struct ioapic' structure - which along with the mp_irq[x] is used to figure out the default values and the polarity/trigger overrides. Since the mp_find_ioapics now returns -1 [b/c the IOAPIC is filled with 0xffffffff], the acpi_get_override_irq() stops trying to lookup in the mp_irq[x] the proper INT_SRV_OVR and we can't install the SCI interrupt. The proper fix for this is going in v3.5 and adds an x86_io_apic_ops struct so that platforms can override it. But for v3.4 lets carry this work-around. This patch does that by providing a slightly different variant of the fake IOAPIC entries. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 06 4月, 2012 10 次提交
-
-
由 Bob Liu 提交于
To fix compile error: drivers/usb/musb/blackfin.h:51:3: error: #error "Please use PIO mode in MUSB driver on bf52x chip v0.0 and v0.1" make[4]: *** [drivers/usb/musb/blackfin.o] Error 1 Signed-off-by: NBob Liu <lliubbo@gmail.com>
-
由 Bob Liu 提交于
Add __gpio_get_value()/__gpio_set_value() to fix compile error if CONFIG_GPIOLIB = n. Signed-off-by: NBob Liu <lliubbo@gmail.com>
-
由 Mike Frysinger 提交于
This patch fix below compile error: "bfin-uclinux-ld: L1 data A overflow!" It is due to the recent lib/gen_crc32table.c change: 46c5801e crc32: bolt on crc32c it added 8KiB more data to __cacheline_aligned which cause blackfin L1 data cache overflow. Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NBob Liu <lliubbo@gmail.com>
-
由 Matt Fleming 提交于
As described in e6fa16ab ("signal: sigprocmask() should do retarget_shared_pending()") the modification of current->blocked is incorrect as we need to check whether the signal we're about to block is pending in the shared queue. Also, use the new helper function introduced in commit 5e6292c0 ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Acked-by: NMark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Acked-by: NOleg Nesterov <oleg@redhat.com> Signed-off-by: NMatt Fleming <matt.fleming@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Matt Fleming 提交于
As described in e6fa16ab ("signal: sigprocmask() should do retarget_shared_pending()") the modification of current->blocked is incorrect as we need to check for shared signals we're about to block. Also, use the new helper function introduced in commit 5e6292c0 ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by: NOleg Nesterov <oleg@redhat.com> Signed-off-by: NMatt Fleming <matt.fleming@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stephen Boyd 提交于
Many users of debugfs copy the implementation of default_open() when they want to support a custom read/write function op. This leads to a proliferation of the default_open() implementation across the entire tree. Now that the common implementation has been consolidated into libfs we can replace all the users of this function with simple_open(). This replacement was done with the following semantic patch: <smpl> @ open @ identifier open_f != simple_open; identifier i, f; @@ -int open_f(struct inode *i, struct file *f) -{ ( -if (i->i_private) -f->private_data = i->i_private; | -f->private_data = i->i_private; ) -return 0; -} @ has_open depends on open @ identifier fops; identifier open.open_f; @@ struct file_operations fops = { ... -.open = open_f, +.open = simple_open, ... }; </smpl> [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: NStephen Boyd <sboyd@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rob Herring 提交于
With commit c334bc15 (ARM: make mach/io.h include optional), PCMCIA was broken. PCMCIA depends on __io() returning a valid i/o address, and most ARM platforms require IO_SPACE_LIMIT be set to 0xffffffff for PCMCIA. This needs a better fix with a fixed i/o address mapping, but for now we just restore things to the previous behavior. This fixes at91, omap1, pxa and sa11xx. pxa needs io.h if PCI is enabled, but PCMCIA is not. sa11xx already has IO_SPACE_LIMIT set to 0xffffffff, so it doesn't need an io.h. Signed-off-by: NRob Herring <rob.herring@calxeda.com> Cc: Joachim Eastwood <joachim.eastwood@jotron.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Tested-by: Paul Parsons <lost.distance@yahoo.com> (pxa270) Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Gleb Natapov 提交于
"Page ready" async PF can kick vcpu out of idle state much like IRQ. We need to tell RCU about this. Reported-by: NSasha Levin <levinsasha928@gmail.com> Signed-off-by: NGleb Natapov <gleb@redhat.com> Reviewed-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Marcelo Tosatti 提交于
vmx_set_cr0 is called from vcpu run context, therefore it expects kvm->srcu to be held (for setting up the real-mode TSS). Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Sasikantha babu 提交于
Signed-off-by: NSasikantha babu <sasikanth.v19@gmail.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 05 4月, 2012 17 次提交
-
-
由 Sachin Kamat 提交于
Fixes the following warning: warning: 'dma_dmamask' defined but not used [-Wunused-variable] Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Il Han 提交于
ISO C90 forbids mixed declarations and code. Fix it. Signed-off-by: NIl Han <corone.il.han@gmail.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Vaibhav Hiremath 提交于
In the SYSC_TYPE1_XXX_MASK configuration, SYSC_XXX_SHIFT macro is used which is not defined anywhere in the kernel. Until now the build was going through successfully, since it is not being used anywhere in kernel. This bug got introduced by the commit 358f0e63 ("OMAP3: hwmod: support to specify the offset position of various SYSCONFIG register bits.") Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com> Acked-by: NBenoit Cousson <b-cousson@ti.com> Signed-off-by: NPaul Walmsley <paul@pwsan.com>
-
由 Rajendra Nayak 提交于
omap_hwmod_softreset() does not seem to wait for reset status after doing a softreset. Make it use _ocp_softreset() instead which does this correctly. Signed-off-by: NRajendra Nayak <rnayak@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Anand Gadiyar <gadiyar@ti.com> Cc: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: NPaul Walmsley <paul@pwsan.com>
-
由 Rajendra Nayak 提交于
After a softreset, make sure the sysc settings are correctly restored. Reported-by: NAnand Gadiyar <gadiyar@ti.com> Signed-off-by: NRajendra Nayak <rnayak@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Shubhrajyoti D <shubhrajyoti@ti.com> [paul@pwsan.com: combined post-reset SYSCONFIG reload code into the _reset() function to avoid duplication and future mistakes] Signed-off-by: NPaul Walmsley <paul@pwsan.com>
-
由 Govindraj.R 提交于
Some modules doesn't have SYSC_HAS_ENAWAKEUP bit available (ex: usb host uhh module) in absence of this flag omap_hwmod_enable/disable_wakeup avoids configuring pad mux wakeup capability. Configure sysc if SYSC_HAS_ENAWAKEUP is available and for other cases try enabling/disabling wakeup from mux_pad pins. Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Signed-off-by: NGovindraj.R <govindraj.raja@ti.com> [paul@pwsan.com: updated function kerneldoc documentation] Signed-off-by: NPaul Walmsley <paul@pwsan.com>
-
由 Paul Walmsley 提交于
Several clocks are missing clockdomains. This can cause problems with the hwmod and power management code. Fill these in. Signed-off-by: NPaul Walmsley <paul@pwsan.com> Cc: Matt Porter <mporter@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com>
-
由 Rajendra Nayak 提交于
All DPLLs except USB are in ALWON powerdomain. Make sure the clkdm/pwrdm for USB DPLL (l3init) is turned on before attempting a DPLL relock. So, mark the database accordingly. Without this fix, it was seen that DPLL relock fails while testing relock in a loop of USB DPLL. Cc: Nishanth Menon <nm@ti.com> Tested-by: NAmeya Palande <ameya.palande@ti.com> Signed-off-by: NRajendra Nayak <rnayak@ti.com> Signed-off-by: NPaul Walmsley <paul@pwsan.com>
-
由 Ameya Palande 提交于
According to OMAP4 TRM Table 3-1183, CM_CLKSEL_DPLL_USB register defines following fields for multiplication and division factors: DPLL_MULT (bits 19:8) DPLL multiplier factor (2 to 4095) DPLL_DIV (bits 7:0) DPLL divider factor (0 to 255) Acked-by: NBenoit Cousson <b-cousson@ti.com> Signed-off-by: NAmeya Palande <ameya.palande@ti.com> Signed-off-by: NPaul Walmsley <paul@pwsan.com>
-
由 Santosh Shilimkar 提交于
Commit b1cbdb00 ("OMAP: clockdomain: Wait for powerdomain to be ON when using clockdomain force wakeup") was assuming that pwrdm_state_switch() does wait for the powerdomain transition which is not the case. The missing wait for the powerdomain transition violates the sequence which the hardware expects, which causes power management failures on some devices. Fix this API by adding the pwrdm_wait_transition(). Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Paul Walmsley <paul@pwsan.com> [paul@pwsan.com: added some more details in the commit log] Signed-off-by: NPaul Walmsley <paul@pwsan.com>
-
由 Ludovic Desroches 提交于
Because of the inclusion of skeleton.dtsi, the memory node is named "memory" we where not modifying the already included one but creating a new one. It caused bad memory node detection during early_init_dt_scan_memory() so we modify them. Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: devicetree-discuss@lists.ozlabs.org
-
由 Nicolas Ferre 提交于
SPI chip select pins have to be checked by gpio_is_valid(). The USB host overcurrent_pin checking was missing. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Nicolas Ferre 提交于
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Nicolas Ferre 提交于
Change number of ports to 3 for newer SoCs. Modify pdata structure and ohci-at91 code that was dealing with ports information and check of port indexes. Several coding style errors have been addresses as the patch was touching affected lines of code and was producing errors while run through checkpatch.pl. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NAlan Stern <stern@rowland.harvard.edu>
-
由 Nicolas Ferre 提交于
Change vbus gpio configuration in .dts files to switch to active low configuration. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: stable <stable@vger.kernel.org>
-
由 Nicolas Ferre 提交于
Due to an error while handling vbus_pin_active_low in ohci-at91 driver, the specification of this property was not good in devices/board files. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: stable <stable@vger.kernel.org> [3.2+]
-
由 Dima Zavin 提交于
Signed-off-by: NDima Zavin <dima@android.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-