Two dimensional paging is only confused by it.
Signed-off-by: NAvi Kivity <avi@redhat.com>

This actually describes what is going on, rather than alerting the reader
that something strange is going on.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Zeroing on mmu_memory_cache_alloc is unnecessary since:

- Smaller areas are pre-allocated with kmem_cache_zalloc.
- Page pointed by ->spt is overwritten with prefetch_page
  and entries in page pointed by ->gfns are initialized
  before reading.

[avi: zeroing pages is unnecessary]
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Provide register layout for struct kvm_regs exposed to userland.
Signed-off-by: NJes Sorensen <jes@sgi.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

While the PIT is masked the guest cannot ack the irq, so the reinject logic
will never allow the interrupt to be injected.

Fix by resetting the reinjection counters on unmask.

Unbreaks Xen.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Allow clients to request notifications when the guest masks or unmasks a
particular irq line.  This complements irq ack notifications, as the guest
will not ack an irq line that is masked.

Currently implemented for the ioapic only.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Two KVM archs support irqchips and two don't.  Add a Kconfig item to
make selecting between the two models easier.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Using kvm_mmu_lookup_page() will result in multiple scans of the hash chains;
use hlist_for_each_entry_safe() to achieve a single scan instead.
Signed-off-by: NAvi Kivity <avi@redhat.com>

VMware ESX checks if the microcode level is correct when using a barcelona
CPU, in order to see if it actually can use SVM. Let's tell it we're on the
safe side...
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

MSI is always enabled by default for msi2intx=1. But if msi2intx=0, we
have to disable MSI if guest require to do so.

The patch also discard unnecessary msi2intx judgment if guest want to update
MSI state.

Notice KVM_DEV_IRQ_ASSIGN_MSI_ACTION is a mask which should cover all MSI
related operations, though we only got one for now.
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

After the rewrite of KVM's debug support, this code doesn't even build any
more.
Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Otherwise, two threads can create a PIT in parallel and cause a memory leak.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>

If we aren't doing mmio there's no need to exit to userspace (which will
just be confused).
Signed-off-by: NAvi Kivity <avi@redhat.com>

Allow emulate_pop() to read into arbitrary memory rather than just the
source operand.  Needed for complicated instructions like far returns.
Signed-off-by: NAvi Kivity <avi@redhat.com>

If we've just emulated an instruction, we won't have any valid exit
reason and associated information.

Fix by moving the clearing of the emulation_required flag to the exit handler.
This way the exit handler can notice that we've been emulating and abort
early.
Signed-off-by: NAvi Kivity <avi@redhat.com>

The ususable bit is important for determining state validity; don't
clobber it.
Signed-off-by: NAvi Kivity <avi@redhat.com>

The vmx guest state validity checks are full of bugs.  Make them
conform to the manual.
Signed-off-by: NAvi Kivity <avi@redhat.com>

e500 has additional interrupt vectors (and corresponding IVORs) for SPE and
performance monitoring interrupts.
Signed-off-by: NLiu Yu <yu.liu@freescale.com>
Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Although BOOKE_MAX_INTERRUPT has the right value, the meaning is not match.
Signed-off-by: NLiu Yu <yu.liu@freescale.com>
Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

When itlb or dtlb miss happens, E500 needs to update some mmu registers.
So that the auto-load mechanism can work on E500 when write a tlb entry.
Signed-off-by: NLiu Yu <yu.liu@freescale.com>
Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NLiu Yu <yu.liu@freescale.com>
Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

E500 deosn't support this instruction.
Signed-off-by: NLiu Yu <yu.liu@freescale.com>
Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NLiu Yu <yu.liu@freescale.com>
Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Kernel for E500 need clear dbsr when startup.
So add dbsr register in kvm_vcpu_arch for BOOKE.
Signed-off-by: NLiu Yu <yu.liu@freescale.com>
Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The Book E code will be shared with e500.

I've left PID in kvmppc_core_emulate_op() just so that we don't need to move
kvmppc_set_pid() right now. Once we have the e500 implementation, we can
probably share that too.
Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

e500 will provide its own implementation of these.
Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Passing just the TLB index will ease an e500 implementation.
Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This is an x86 specific stucture and has no business living in common code.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Certain clocks (such as TSC) in older 2.6 guests overaccount for lost
ticks, causing severe time drift. Interrupt reinjection magnifies the
problem.

Provide an option to disable it.

[avi: allow room for expansion in case we want to disable reinjection
      of other timers]
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Since we advertise MSR_VM_HSAVE_PA, userspace will attempt to read it
even on Intel.  Implement fake support for this MSR to avoid the
warnings.
Signed-off-by: NAvi Kivity <avi@redhat.com>

vmap() on guest pages hides those pages from the Linux mm for an extended
(userspace determined) amount of time.  Get rid of it.
Signed-off-by: NIzik Eidus <ieidus@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>