Now that the fixed point functions are fixed we
can re-enable cac support.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Need to make some slight adjustments for the fixed point math to
work properly.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The ProcessAuxChannel table on some rv635 boards assumes
the divmul members are initialized to 0 otherwise we get
an invalid fb offset since it has a bad mask set when
setting the fb base.  While here initialize all the
atom interpretor elements to 0.

Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=60639Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

The SMC interface changed compared to Cayman and
previous asics.  Set the enabled levels properly
and enable reclocking by default when dpm is enabled.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Disable cac setup on SI for now since it causes
strange performance level restrictions on certain
cards.  I suspect there may be issues with some of
the 64 bit fixed point double emulation that is used
to set up those parameters.  I need to double check
the math before this can be re-enabled.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Coarse grain clockgating causes problems with reclocking on
some cards and powergating (verde only) causes problems with
ring initialization.  The proper fix (restructuring the init
sequences) is too invasive for 3.11 so just disable them for
now.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Need to program EnabledLevels to 1 to force the low state.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For correctness.  The fb divider isn't actually used
in any of the relevant dpm code.  It's calculated
from the other parameters.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Don't try and enable clockgating if the asic doesn't have
UVD.  Use rdev->has_uvd rather than using local checks.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

0x6835 should be treated as a cape verde pro.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Update alogorithm as per internal advice.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Need to set the DISP*_GAP fields as well as the
DISP*_GAP_MCHG fields.  Same as on previous asics.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We need to set the dto source before setting the
dividers otherwise we may get stability problems
with the dto leading to audio playback problems.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org

Actually program the correct register to enable
engine clock scaling control.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Allows you to limit the selected power levels via sysfs.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Need to use the driver state rather than the register
state since the displays may not be enabled when the
power state is programmed.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Need to set high for the last two entries.  Looks
like a copy and paste typo.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Noticed that my old Radeon 7500 hung after printing

   drm: GPU not posted. posting now...

when it wasn't selected as the primary card the BIOS.  Some digging
revealed that it was hanging in combios_parse_mmio_table() while
parsing the ASIC INIT 3 table.  Looking at the BIOS ROM for the card,
it becomes obvious that there is no ASIC INIT 3 table in the BIOS.
The code is just processing random garbage.  No surprise it hangs!

Why do I say that there is no ASIC INIT 3 table is the BIOS?  This
table is found through the MISC INFO table.  The MISC INFO table can
be found at offset 0x5e in the COMBIOS header.  But the header is
smaller than that.  The COMBIOS header starts at offset 0x126.  The
standard PCI Data Structure (the bit that starts with 'PCIR') lives at
offset 0x180.  That means that the COMBIOS header can not be larger
than 0x5a bytes and therefore cannot contain a MISC INFO table.

I looked at a dozen or so BIOS images, some my own, some downloaded from:

    <http://www.techpowerup.com/vgabios/index.php?manufacturer=ATI&page=1>

It is fairly obvious that the size of the COMBIOS header can be found
at offset 0x6 of the header.  Not sure if it is a 16-bit number or
just an 8-bit number, but that doesn't really matter since the tables
seems to be always smaller than 256 bytes.

So I think combios_get_table_offset() should check if the requested
table is present.  This can be done by checking the offset against the
size of the header.  See the diff below.  The diff is against the WIP
OpenBSD codebase that roughly corresponds to Linux 3.8.13 at this
point.  But I don't think this bit of the code changed much since
then.

For what it is worth:
Signed-off-by: NMark Kettenis <kettenis@openbsd.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Hopefully avoid more quirks in the future due to bogus
vbios dac data.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Hello,
got another card with "too bright" problem:
Sapphire Radeon VE 7000 DDR (VGA+S-Video)

lspci -vnn:
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RV100 QY [Radeon 7000/VE] [1002:5159] (prog-if 00 [VGA controller])
        Subsystem: PC Partner Limited Sapphire Radeon VE 7000 DDR [174b:7c28]

The patch below fixes the problem for this card.
But I don't like the blacklist, couldn't some heuristic be used instead?
The interesting thing is that the manufacturer is the same as the other card
needing the same quirk. I wonder how many different types are broken this way.

The "wrong" ps2_pdac_adj value that comes from BIOS on this card is 0x300.

====================
drm/radeon: Add primary dac adj quirk for Sapphire Radeon VE 7000 DDR

Values from BIOS are wrong, causing too bright colors.
Use default values instead.
Signed-off-by: NOndrej Zary <linux@rainbow-software.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

The atom interpreter expects data in LE format, so
swap the message buffer as apprioriate.

v2: properly handle non-dw aligned byte counts.
v3: properly handle remainder
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: Dong He <hedonghust@gmail.com>
Cc: stable@vger.kernel.org

fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=67016Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Make sure the 3D engine is idle before using CP DMA for
bo copies.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: Marek Olšák <maraeo@gmail.com>

This allows you to look at the current DPM state via
debugfs.

Due to the way the hardware works on these asics, there's
no way to look up exactly what power state we are in, so
we make the best guess we can based on the current sclk.

v2: Anthoine's version
v3: fix ref div
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It seems gcc 4.8.1 generates bogus code for the old logic causing
part of the function to get skipped.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Parsing the table in incorrectly led to problems with
certain asics with mclk switching.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Can cause hangs when enabled in certain motherboards.
Set radeon.aspm=0 to disable aspm.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix a warning from lockdep caused by calling flush_work() for
uninitialized hotplug work. Initialize hotplug_work, audio_work
and reset_work upon successful radeon_irq_kms_init() completion
and thus perform hotplug flush_work only when rdev->irq.installed
is true.

[    4.790019] [drm] Loading CEDAR Microcode
[    4.790943] r600_cp: Failed to load firmware "radeon/CEDAR_smc.bin"
[    4.791152] [drm:evergreen_startup] *ERROR* Failed to load firmware!
[    4.791330] radeon 0000:01:00.0: disabling GPU acceleration

[    4.792633] INFO: trying to register non-static key.
[    4.792792] the code is fine but needs lockdep annotation.
[    4.792953] turning off the locking correctness validator.

[    4.793114] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 3.11.0-rc0-dbg-10676-gfe56456-dirty #1816
[    4.793314] Hardware name: Acer             Aspire 5741G    /Aspire 5741G    , BIOS V1.20 02/08/2011
[    4.793507]  ffffffff821fd810 ffff8801530b9a18 ffffffff8160434e 0000000000000002
[    4.794155]  ffff8801530b9ad8 ffffffff810b8404 ffff8801530b0798 ffff8801530b0000
[    4.794789]  ffff8801530b9b00 0000000000000046 00000000000004c0 ffffffff00000000
[    4.795418] Call Trace:
[    4.795573]  [<ffffffff8160434e>] dump_stack+0x4e/0x82
[    4.795731]  [<ffffffff810b8404>] __lock_acquire+0x1a64/0x1d30
[    4.795893]  [<ffffffff814a87f0>] ? dev_vprintk_emit+0x50/0x60
[    4.796034]  [<ffffffff810b8fb4>] lock_acquire+0xa4/0x200
[    4.796216]  [<ffffffff8106cd75>] ? flush_work+0x5/0x280
[    4.796375]  [<ffffffff8106cdad>] flush_work+0x3d/0x280
[    4.796520]  [<ffffffff8106cd75>] ? flush_work+0x5/0x280
[    4.796682]  [<ffffffff810b659d>] ? trace_hardirqs_on_caller+0xfd/0x1c0
[    4.796862]  [<ffffffff8131d775>] ? delay_tsc+0x95/0xf0
[    4.797024]  [<ffffffff8141bb8b>] radeon_irq_kms_fini+0x2b/0x70
[    4.797186]  [<ffffffff814557c9>] evergreen_init+0x2a9/0x2e0
[    4.797347]  [<ffffffff813ebb1f>] radeon_device_init+0x5ef/0x700
[    4.797511]  [<ffffffff81335bc7>] ? pci_find_capability+0x47/0x50
[    4.797672]  [<ffffffff813edaed>] radeon_driver_load_kms+0x8d/0x150
[    4.797843]  [<ffffffff813ce426>] drm_get_pci_dev+0x166/0x280
[    4.798007]  [<ffffffff8116cff5>] ? kfree+0xf5/0x2e0
[    4.798168]  [<ffffffff813ea298>] ? radeon_pci_probe+0x98/0xd0
[    4.798329]  [<ffffffff813ea2aa>] radeon_pci_probe+0xaa/0xd0
[    4.798489]  [<ffffffff81339404>] pci_device_probe+0x84/0xe0
[    4.798644]  [<ffffffff814ac7d6>] driver_probe_device+0x76/0x240
[    4.798805]  [<ffffffff814aca73>] __driver_attach+0x93/0xa0
[    4.798948]  [<ffffffff814ac9e0>] ? __device_attach+0x40/0x40
[    4.799126]  [<ffffffff814aa82b>] bus_for_each_dev+0x6b/0xb0
[    4.799272]  [<ffffffff814ac2be>] driver_attach+0x1e/0x20
[    4.799434]  [<ffffffff814abec0>] bus_add_driver+0x1f0/0x280
[    4.799596]  [<ffffffff814ad0e4>] driver_register+0x74/0x150
[    4.799758]  [<ffffffff8133923d>] __pci_register_driver+0x5d/0x60
[    4.799936]  [<ffffffff81d16efc>] ? ttm_init+0x67/0x67
[    4.800081]  [<ffffffff813ce655>] drm_pci_init+0x115/0x130
[    4.800243]  [<ffffffff81d16efc>] ? ttm_init+0x67/0x67
[    4.800405]  [<ffffffff81d16f98>] radeon_init+0x9c/0xba
[    4.800586]  [<ffffffff810002ca>] do_one_initcall+0xfa/0x150
[    4.800746]  [<ffffffff81073f60>] ? parse_args+0x120/0x330
[    4.800909]  [<ffffffff81cdafae>] kernel_init_freeable+0x111/0x191
[    4.801052]  [<ffffffff81cda87a>] ? do_early_param+0x88/0x88
[    4.801233]  [<ffffffff815fb670>] ? rest_init+0x140/0x140
[    4.801393]  [<ffffffff815fb67e>] kernel_init+0xe/0x180
[    4.801556]  [<ffffffff8160dcac>] ret_from_fork+0x7c/0xb0
[    4.801718]  [<ffffffff815fb670>] ? rest_init+0x140/0x140
Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Need to properly enable/disable boost states when forcing a performance
level.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Covers requirements of all current asics.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

There are cases where we need more than 4k alignment.  No
functional change with this commit.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Changing the UVD BOs offset on suspend/resume doesn't work because the VCPU
internally keeps pointers to it. Just keep it always pinned and save the
content manually.

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=66425

v2: fix compiler warning
v3: fix CIK support

Note: a version of this patch needs to go to stable.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Currently doesn't matter cause we allocate the fence in the
lower 265MB anyway.
Reported-by: NFrank Huang <FrankR.Huang@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Helpful for debugging GPUVM errors as we can see what
hw block and page generated the fault in the log.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Helpful for debugging GPUVM errors as we can see what
hw block and page generated the fault in the log.

v2: simplify fault decoding
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

Helpful for debugging GPUVM errors as we can see what
hw block and page generated the fault in the log.

v2: simplify fault decoding
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

Avoid creating temporary platform device that will lead to issue
when several radeon gpu are in same computer. Instead directly use
the radeon device for requesting firmware.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Op 10-07-13 12:03, Markus Trippelsdorf schreef:
> On 2013.07.10 at 11:56 +0200, Maarten Lankhorst wrote:
>> Op 10-07-13 11:46, Markus Trippelsdorf schreef:
>>> On 2013.07.10 at 11:29 +0200, Maarten Lankhorst wrote:
>>>> Op 10-07-13 11:22, Markus Trippelsdorf schreef:
>>>>> By simply copy/pasting a big document under LibreOffice my system hangs
>>>>> itself up. Only a hard reset gets it working again.
>>>>> see also: https://bugs.freedesktop.org/show_bug.cgi?id=66551
>>>>>
>>>>> I've bisected the issue to:
>>>>>
>>>>> commit ecff665f
>>>>> Author: Maarten Lankhorst <m.b.lankhorst@gmail.com>
>>>>> Date:   Thu Jun 27 13:48:17 2013 +0200
>>>>>
>>>>>     drm/ttm: make ttm reservation calls behave like reservation calls
>>>>>
>>>>>     This commit converts the source of the val_seq counter to
>>>>>     the ww_mutex api. The reservation objects are converted later,
>>>>>     because there is still a lockdep splat in nouveau that has to
>>>>>     resolved first.
>>>>>
>>>>>     Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
>>>>>     Reviewed-by: Jerome Glisse <jglisse@redhat.com>
>>>>>     Signed-off-by: Dave Airlie <airlied@redhat.com>
>>>> Hey,
>>>>
>>>> Can you try current head with CONFIG_PROVE_LOCKING set and post the
>>>> lockdep splat from dmesg, if any? If there is any locking issue
>>>> lockdep should warn about it.  Lockdep will turn itself off after the
>>>> first splat, so if the lockdep splat happens before running the
>>>> affected parts those will have to be fixed first.
>>> There was an unrelated EDAC lockdep splat, so I simply disabled it.

> >>> This is what I get:

>>> Jul 10 11:40:44 x4 kernel: ================================================
>>> Jul 10 11:40:44 x4 kernel: [ BUG: lock held when returning to user space! ]
>>> Jul 10 11:40:44 x4 kernel: 3.10.0-08587-g496322bc #35 Not tainted
>>> Jul 10 11:40:44 x4 kernel: ------------------------------------------------
>>> Jul 10 11:40:44 x4 kernel: X/211 is leaving the kernel with locks still held!
>>> Jul 10 11:40:44 x4 kernel: 2 locks held by X/211:
>>> Jul 10 11:40:44 x4 kernel: #0:  (reservation_ww_class_acquire){+.+.+.}, at: [<ffffffff813279f0>] radeon_bo_list_validate+0x20/0xd0
>>> Jul 10 11:40:44 x4 kernel: #1:  (reservation_ww_class_mutex){+.+.+.}, at: [<ffffffff81309306>] ttm_eu_reserve_buffers+0x126/0x4b0
>>> Jul 10 11:40:52 x4 kernel: SysRq : Emergency Sync
>>> Jul 10 11:40:53 x4 kernel: Emergency Sync complete
>>>
>> Thanks, exactly what I thought. I missed a backoff somewhere..
>>
>> Does the below patch fix it?
> Yes. Thank you for your quick reply.

8<------
If radeon_cs_parser_relocs fails ttm_eu_backoff_reservation doesn't get called.
This left open a bug where ttm_eu_reserve_buffers succeeded but the bo's were
not unlocked afterwards:

Jul 10 11:40:44 x4 kernel: ================================================
Jul 10 11:40:44 x4 kernel: [ BUG: lock held when returning to user space! ]
Jul 10 11:40:44 x4 kernel: 3.10.0-08587-g496322bc #35 Not tainted
Jul 10 11:40:44 x4 kernel: ------------------------------------------------
Jul 10 11:40:44 x4 kernel: X/211 is leaving the kernel with locks still held!
Jul 10 11:40:44 x4 kernel: 2 locks held by X/211:
Jul 10 11:40:44 x4 kernel: #0:  (reservation_ww_class_acquire){+.+.+.}, at: [<ffffffff813279f0>] radeon_bo_list_validate+0x20/0xd0
Jul 10 11:40:44 x4 kernel: #1:  (reservation_ww_class_mutex){+.+.+.}, at: [<ffffffff81309306>] ttm_eu_reserve_buffers+0x126/0x4b0
Jul 10 11:40:52 x4 kernel: SysRq : Emergency Sync
Jul 10 11:40:53 x4 kernel: Emergency Sync complete

This is a regression caused by commit ecff665f.
"drm/ttm: make ttm reservation calls behave like reservation calls"
Reported-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>
Tested-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>