Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Will be useful in debugging the transition to atomic.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Sometimes we load with a sink already in MST mode.  If, however, we can't
or don't want to use MST, we need to be able to switch it back to SST.

This commit instantiates a stub topology manager for any output path that
we believe (the detection of this could use some improvement) has support
for MST, and adds the connector detect() logic for detecting sink support
and switching between modes.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This is different from the equivilant functions in the atomic helpers in
that we fully disable the pipe instead of just setting it to inactive.

We do this (primarily) to ensure the framebuffer cleanup paths are hit,
allowing buffers to be un-pinned from memory so they can be evicted to
system memory and not lose their contents while suspended.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

These will also be used by MST connectors.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This commit implements the atomic property hooks for a connector, and
wraps the legacy interface handling on top of those.

For the moment, a full modeset will be done after any property change
in order to ease subsequent changes.  The optimised behaviour will be
restored for Tesla and later (earlier boards always do full modesets)
once atomic commits are implemented.

Some functions are put under the "nouveau_conn" namespace now, rather
than "nouveau_connector", to distinguish functions that will work for
(upcoming) MST connectors too.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This will ensure we have some kind of initial atomic state for all objects
after initialisation.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

nouveau_display_fini() is responsible for quiescing the hardware, so
this is where such actions belong.

More than that, nouveau_display_fini() switches off the receiving of
sink irqs, which MST will require while shutting down an active head.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This primarily existed to ensure the DP link got retrained, and is
now unnecessary as that's handled by NVKM already.

For anything beyond that, we send an event to userspace and let it
decide on an appropriate action to take.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Transitional step towards properly refcounting the fbcon fb.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

No need to store the pointer ourselves when it's already present in
the base struct.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

There haven't been any callers from an atomic context for a while now,
so let's remove the extra complexity.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

'iommu_domain_alloc()' returns NULL in case of error, not an error pointer.
So test it accordingly.
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

gm20b's FB has the same capabilities as gm200, minus the ability to
allocate RAM. Create a device that reflects this instead of re-using the
gk20a device which may be incorrect.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Reviewed-By: NKarol Herbst <karolherbst@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

gk20a's FB is not special compared to other Kepler chips, besides the
fact it does not have VRAM. Use the regular gf100 hooks instead of the
incomplete versions we rewrote.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Reviewed-By: NKarol Herbst <karolherbst@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The gf100 constructor should be called, otherwise we will allocate a
smaller object than expected. This was without effect so far because
gk20a did not allocate a page, but with gf100's page allocation moved
to the oneinit() hook this problem has become apparent.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The reset hook of pmu_func is never called, and gt215 was the only chip
to implement. Remove this dead code.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

There is no reason to not free the notify data if the NTFY_DEL ioctl
failed. As nvif_notify_fini() is also called from the cleanup path of
nvif_notify_init(), the notifier may not have been successfully created
at that point. But it should also be the right thing to just free the
data in the regular fini calls, as there is nothing much we can do if
the ioctl fails, so better not leak memory.
Signed-off-by: NLucas Stach <dev@lynxeye.de>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

uevent based fences hold a reference to the fence context,
just like the legacy ones. So they need to drop this reference
in the same way.
Signed-off-by: NLucas Stach <dev@lynxeye.de>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

gcc-4.9 notices that the validate_init() function returns unintialized
data when called with a zero 'nr_buffers' argument, when called with the
-Wmaybe-uninitialized flag:

drivers/gpu/drm/nouveau/nouveau_gem.c: In function ‘validate_init.isra.6’:
drivers/gpu/drm/nouveau/nouveau_gem.c:457:5: error: ‘ret’ may be used uninitialized in this function [-Werror=maybe-uninitialized]

However, the only caller of this function always passes a nonzero
argument, and gcc-6 is clever enough to take this into account and
not warn about it any more.

Adding an explicit initialization to -EINVAL here is correct even if
the caller changed, and it avoids the warning on gcc-4.9 as well.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-By: NKarol Herbst <karolherbst@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

We get a few warnings when building kernel with W=1:
drivers/gpu/drm/nouveau/nvkm/subdev/bios/fan.c:29:1: warning: no previous prototype for 'nvbios_fan_table' [-Wmissing-prototypes]
drivers/gpu/drm/nouveau/nvkm/subdev/bios/fan.c:56:1: warning: no previous prototype for 'nvbios_fan_entry' [-Wmissing-prototypes]
drivers/gpu/drm/nouveau/nvkm/subdev/clk/gt215.c:184:1: warning: no previous prototype for 'gt215_clk_info' [-Wmissing-prototypes]
drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramgt215.c:99:1: warning: no previous prototype for 'gt215_link_train_calc' [-Wmissing-prototypes]
drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramgt215.c:153:1: warning: no previous prototype for 'gt215_link_train' [-Wmissing-prototypes]
drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramgt215.c:271:1: warning: no previous prototype for 'gt215_link_train_init' [-Wmissing-prototypes]
....

In fact, both functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
So this patch marks these functions with 'static'.
Signed-off-by: NBaoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

We get a few warnings when building kernel with W=1:
drivers/gpu/drm/nouveau/nvkm/core/firmware.c:34:1: warning: no previous prototype for 'nvkm_firmware_get' [-Wmissing-prototypes]
drivers/gpu/drm/nouveau/nvkm/core/firmware.c:58:1: warning: no previous prototype for 'nvkm_firmware_put' [-Wmissing-prototypes]
drivers/gpu/drm/nouveau/nvkm/subdev/fb/sddr3.c:69:1: warning: no previous prototype for 'nvkm_sddr3_calc' [-Wmissing-prototypes]
drivers/gpu/drm/nouveau/nvkm/subdev/fb/sddr2.c:60:1: warning: no previous prototype for 'nvkm_sddr2_calc' [-Wmissing-prototypes]
....

In fact, these functions are declared in
drivers/gpu/drm/nouveau/include/nvkm/core/firmware.h
drivers/gpu/drm/nouveau/nvkm/subdev/fb/ram.h
drivers/gpu/drm/nouveau/nvkm/subdev/volt/priv.h
drivers/gpu/drm/nouveau/nvkm/engine/gr/nv50.h
drivers/gpu/drm/nouveau/dispnv04/disp.h.
So this patch adds missing header dependencies.
Signed-off-by: NBaoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

DPAUX registers moved on Kepler, these chipsets were still using the
Fermi implementation for some reason.

This fixes detection of hotplug/sink IRQs on DP connectors.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org

This fixes (works around?) link training failures seen on (at least)
the Lenovo P50's internal panel.

It's also an important fix on the same system for MST support on the
dock.  Sometimes, right after receiving an IRQ from the sink, there's
an error bit (SINKSTAT_ERR) set in the DPAUX registers before we've
even attempted a transaction.

v2. Fixed regression on passive DP->DVI adapters.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org

dw_pcie_iatu_unroll_enabled() reads a dbi_base register.  Reading any
dbi_base register before pp->ops->host_init has been called causes
"imprecise external abort" on platforms like ARTPEC-6, where the PCIe
module is disabled at boot and first enabled in pp->ops->host_init.  Move
dw_pcie_iatu_unroll_enabled() to dw_pcie_setup_rc(), since it is after
pp->ops->host_init, but before pp->iatu_unroll_enabled is actually used.

Fixes: a0601a47 ("PCI: designware: Add iATU Unroll feature")
Tested-by: NJames Le Cuirot <chewi@gentoo.org>
Signed-off-by: NNiklas Cassel <niklas.cassel@axis.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NJoao Pinto <jpinto@synopsys.com>
Acked-by: NOlof Johansson <olof@lixom.net>

Race condition between registering an I2C device driver and
deregistering an I2C adapter device which is assumed to manage that
I2C device may lead to a NULL pointer dereference due to the
uninitialized list head of driver clients.

The root cause of the issue is that the I2C bus may know about the
registered device driver and thus it is matched by bus_for_each_drv(),
but the list of clients is not initialized and commonly it is NULL,
because I2C device drivers define struct i2c_driver as static and
clients field is expected to be initialized by I2C core:

  i2c_register_driver()             i2c_del_adapter()
    driver_register()                 ...
      bus_add_driver()                ...
        ...                           bus_for_each_drv(..., __process_removed_adapter)
      ...                               i2c_do_del_adapter()
    ...                                   list_for_each_entry_safe(..., &driver->clients, ...)
    INIT_LIST_HEAD(&driver->clients);

To solve the problem it is sufficient to do clients list head
initialization before calling driver_register().

The problem was found while using an I2C device driver with a sluggish
registration routine on a bus provided by a physically detachable I2C
master controller, but practically the oops may be reproduced under
the race between arbitraty I2C device driver registration and managing
I2C bus device removal e.g. by unbinding the latter over sysfs:

% echo 21a4000.i2c > /sys/bus/platform/drivers/imx-i2c/unbind
  Unable to handle kernel NULL pointer dereference at virtual address 00000000
  Internal error: Oops: 17 [#1] SMP ARM
  CPU: 2 PID: 533 Comm: sh Not tainted 4.9.0-rc3+ #61
  Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
  task: e5ada400 task.stack: e4936000
  PC is at i2c_do_del_adapter+0x20/0xcc
  LR is at __process_removed_adapter+0x14/0x1c
  Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
  Control: 10c5387d  Table: 35bd004a  DAC: 00000051
  Process sh (pid: 533, stack limit = 0xe4936210)
  Stack: (0xe4937d28 to 0xe4938000)
  Backtrace:
  [<c0667be0>] (i2c_do_del_adapter) from [<c0667cc0>] (__process_removed_adapter+0x14/0x1c)
  [<c0667cac>] (__process_removed_adapter) from [<c0516998>] (bus_for_each_drv+0x6c/0xa0)
  [<c051692c>] (bus_for_each_drv) from [<c06685ec>] (i2c_del_adapter+0xbc/0x284)
  [<c0668530>] (i2c_del_adapter) from [<bf0110ec>] (i2c_imx_remove+0x44/0x164 [i2c_imx])
  [<bf0110a8>] (i2c_imx_remove [i2c_imx]) from [<c051a838>] (platform_drv_remove+0x2c/0x44)
  [<c051a80c>] (platform_drv_remove) from [<c05183d8>] (__device_release_driver+0x90/0x12c)
  [<c0518348>] (__device_release_driver) from [<c051849c>] (device_release_driver+0x28/0x34)
  [<c0518474>] (device_release_driver) from [<c0517150>] (unbind_store+0x80/0x104)
  [<c05170d0>] (unbind_store) from [<c0516520>] (drv_attr_store+0x28/0x34)
  [<c05164f8>] (drv_attr_store) from [<c0298acc>] (sysfs_kf_write+0x50/0x54)
  [<c0298a7c>] (sysfs_kf_write) from [<c029801c>] (kernfs_fop_write+0x100/0x214)
  [<c0297f1c>] (kernfs_fop_write) from [<c0220130>] (__vfs_write+0x34/0x120)
  [<c02200fc>] (__vfs_write) from [<c0221088>] (vfs_write+0xa8/0x170)
  [<c0220fe0>] (vfs_write) from [<c0221e74>] (SyS_write+0x4c/0xa8)
  [<c0221e28>] (SyS_write) from [<c0108a20>] (ret_fast_syscall+0x0/0x1c)
Signed-off-by: NVladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org

RFC 2734 defines the datagram_size field in fragment encapsulation
headers thus:

    datagram_size:  The encoded size of the entire IP datagram.  The
    value of datagram_size [...] SHALL be one less than the value of
    Total Length in the datagram's IP header (see STD 5, RFC 791).

Accordingly, the eth1394 driver of Linux 2.6.36 and older set and got
this field with a -/+1 offset:

    ether1394_tx() /* transmit */
        ether1394_encapsulate_prep()
            hdr->ff.dg_size = dg_size - 1;

    ether1394_data_handler() /* receive */
        if (hdr->common.lf == ETH1394_HDR_LF_FF)
            dg_size = hdr->ff.dg_size + 1;
        else
            dg_size = hdr->sf.dg_size + 1;

Likewise, I observe OS X 10.4 and Windows XP Pro SP3 to transmit 1500
byte sized datagrams in fragments with datagram_size=1499 if link
fragmentation is required.

Only firewire-net sets and gets datagram_size without this offset.  The
result is lacking interoperability of firewire-net with OS X, Windows
XP, and presumably Linux' eth1394.  (I did not test with the latter.)
For example, FTP data transfers to a Linux firewire-net box with max_rec
smaller than the 1500 bytes MTU
  - from OS X fail entirely,
  - from Win XP start out with a bunch of fragmented datagrams which
    time out, then continue with unfragmented datagrams because Win XP
    temporarily reduces the MTU to 576 bytes.

So let's fix firewire-net's datagram_size accessors.

Note that firewire-net thereby loses interoperability with unpatched
firewire-net, but only if link fragmentation is employed.  (This happens
with large broadcast datagrams, and with large datagrams on several
FireWire CardBus cards with smaller max_rec than equivalent PCI cards,
and it can be worked around by setting a small enough MTU.)

Cc: stable@vger.kernel.org
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>