- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 02 3月, 2010 1 次提交
-
-
由 Sandeep Paulraj 提交于
The DM365 Spectrum Digital EVM comes with an EEPROM connected to SPI0. This patch adds support for the SPI EEPROM. Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
- 27 2月, 2010 1 次提交
-
-
由 Murali Karicheri 提交于
This patch adds following changes:- 1) add sub device configuration data for TVP5146 used by vpfe capture 2) registers platform devices for vpfe_capture, isif and vpss 3) defines hardware resources for the devices listed under 2) 4) defines clock aliase for isif driver 5) adding setup_pinmux() for isif Reviewed-by: NKevin Hilman <khilman@deeprootsystems.com> Signed-off-by: NMurali Karicheri <mkaricheri@gmail.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 05 2月, 2010 1 次提交
-
-
由 Murali Karicheri 提交于
This patch adds following changes:- 1) add sub device configuration data for TVP5146 used by vpfe capture 2) registers platform devices for vpfe_capture, isif and vpss 3) defines hardware resources for the devices listed under 2) 4) defines clock aliase for isif driver 5) adding setup_pinmux() for isif Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
- 07 1月, 2010 1 次提交
-
-
由 Miguel Aguilar 提交于
Adds the device_enable function to the DaVinci Keyscan platform data to setup the PINMUX configuration. It also removes #ifdef from the DM365 EVM board in order to load it properly as a module. Signed-off-by: NMiguel Aguilar <miguel.aguilar@ridgerun.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
- 26 11月, 2009 5 次提交
-
-
由 Miguel Aguilar 提交于
The general structures are defined at DM365 SoC file and the specific platform data structure for the EVM is defined at board file. Signed-off-by: NMiguel Aguilar <miguel.aguilar@ridgerun.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
由 Miguel Aguilar 提交于
The general structures are defined at DM365 SoC file and the specific platform data structure for the EVM is defined at board file. Signed-off-by: NMiguel Aguilar <miguel.aguilar@ridgerun.com>
-
由 Sergei Shtylyov 提交于
There have accumulated quite a lot of them after the code reorganizations... In several cases I had to replace #include <linux/dma-mapping.h> which wasn't needed directly but happened to #include <linux/err.h> which was needed. Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
由 Sneha Narnakaje 提交于
This patch updates the NAND driver platform data to use 4-bit ECC and the ECC_HW/ECC_HW_OOB_FIRST modes. Signed-off-by: NSneha Narnakaje <nsnehaprabha@ti.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
由 Miguel Aguilar 提交于
1) Registers the platform device for McBSP on dm365. 2) Add platform data to DM365 EVM board file. 3) Set i2c address for audio codec at DM365 EVM board file. Signed-off-by: NMiguel Aguilar <miguel.aguilar@ridgerun.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
- 29 9月, 2009 1 次提交
-
-
由 Jaswinder Singh Rajput 提交于
fix the following 'make includecheck' warning: arch/arm/mach-davinci/board-dm365-evm.c: mach/common.h is included more than once. Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Acked-by: NKevin Hilman <khilman@deeprootsystems.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 26 8月, 2009 5 次提交
-
-
由 David Brownell 提交于
Add basic support for the CPLD on the DM365 EVM board: - Read SW5 to set up NAND and keypad vs (someday) OneNAND - Export MMC/SD card detect and writeprotect signals - LED support (same layout as on DM355 EVM) - Static config for video input: * external HD imager precludes MMC1, Ethernet, audio * else either tvp5146 (SD/default) or tvp7002 (HD) The video input could actually be switched around dynamically; change that if/when that's needed (and after those other video inputs have driver support). Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
由 Sandeep Paulraj 提交于
Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
由 Sandeep Paulraj 提交于
Patch adds support for MMC/SD in the DM365 EVM. Pinmux for MMC/SD slot 1 on the DM365 EVM is also configured. Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
由 Sandeep Paulraj 提交于
The patch adds Support for EMAC in the DM365 SOC and the DM365 EVM board. Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
由 Sandeep Paulraj 提交于
The patch adds support for Evaluation Module (EVM) board for the dm365 SoC. Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-