* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (59 commits)
  MAINTAINERS: linux-m32r is moderated for non-subscribers
  linux@lists.openrisc.net is moderated for non-subscribers
  Drop default from "DM365 codec select" choice
  parisc: Kconfig: cleanup Kernel page size default
  Kconfig: remove redundant CONFIG_ prefix on two symbols
  cris: remove arch/cris/arch-v32/lib/nand_init.S
  microblaze: add missing CONFIG_ prefixes
  h8300: drop puzzling Kconfig dependencies
  MAINTAINERS: microblaze-uclinux@itee.uq.edu.au is moderated for non-subscribers
  tty: drop superfluous dependency in Kconfig
  ARM: mxc: fix Kconfig typo 'i.MX51'
  Fix file references in Kconfig files
  aic7xxx: fix Kconfig references to READMEs
  Fix file references in drivers/ide/
  thinkpad_acpi: Fix printk typo 'bluestooth'
  bcmring: drop commented out line in Kconfig
  btmrvl_sdio: fix typo 'btmrvl_sdio_sd6888'
  doc: raw1394: Trivial typo fix
  CIFS: Don't free volume_info->UNC until we are entirely done with it.
  treewide: Correct spelling of successfully in comments
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/apm:
  apm-emulation: use wait_event_freezable() instead of freezer_[do_not_]count()

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (61 commits)
  HID: hid-magicmouse: Magic Trackpad has 1 button, not 2
  HID: Add device IDs for more SJOY adapters
  HID: primax: remove spurious dependency
  HID: support primax keyboards violating USB HID spec
  HID: usbhid: cancel timer for retry synchronously
  HID: wacom: Set input bits before registration
  HID: consolidate MacbookAir 4,1 mappings
  HID: MacbookAir4,1 and MacbookAir4,2 need entry in hid_mouse_ignore_list[]
  HID: Add support MacbookAir 4,1 keyboard
  HID: hidraw: open count should not increase if error
  HID: hiddev: potential info leak in hiddev_ioctl()
  HID: multitouch: decide if hid-multitouch needs to handle mt devices
  HID: add autodetection of multitouch devices
  HID: "hid-logitech" driver with Logitech Driving Force GT
  HID: hid-logitech-dj: fix off by one
  HID: hidraw: protect hidraw_disconnect() better
  HID: hid-multitouch: add support for the IDEACOM 6650 chip
  HID: Add full support for Logitech Unifying receivers
  HID: hidraw: free list for all error in hidraw_open
  HID: roccat: Kone now reports external profile changes via roccat device
  ...

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (62 commits)
  target: Fix compile warning w/ missing module.h include
  target: Remove legacy se_task->task_timer and associated logic
  target: Fix incorrect transport_sent usage
  target: re-use the command S/G list for single-task commands
  target: Fix BIDI t_task_cdb handling in transport_generic_new_cmd
  target: remove transport_allocate_tasks
  target: merge transport_new_cmd_obj into transport_generic_new_cmd
  target: remove the task_sg_bidi field se_task and pSCSI BIDI support
  target: transport_subsystem_check_init cleanups
  target: use a workqueue for I/O completions
  target: remove unused TRANSPORT_ states
  target: remove TRANSPORT_DEFERRED_CMD state
  target: remove the TRANSPORT_REMOVE state
  target: move depth_left manipulation out of transport_generic_request_failure
  target: stop task timers earlier
  target: remove TF_TIMER_STOP
  target: factor some duplicate code for stopping a task
  target: fix list walking in transport_free_dev_tasks
  target: use transport_cmd_check_stop_to_fabric consistently
  target: do not pass the queue object to transport_remove_cmd_from_queue
  ...

* 'for-linus' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (81 commits)
  ARM: 7133/1: SMP: fix per cpu timer setup before the cpu is marked online
  ARM: 7129/1: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY
  ARM: 7136/1: pl330: Fix a race condition
  ARM: smp: fix clipping of number of CPUs
  ARM: 7137/1: Fix error upon adding LL debug
  ARM: Add a few machine types to mach-types
  ARM: 7130/1: dev_archdata: add private iommu extension
  ARM: 7125/1: Add unwinding annotations for 64bit division functions
  ARM: 7120/1: remove bashism in check for multiple zreladdrs
  ARM: 7118/1: rename temp variable in read*_relaxed()
  ARM: 6217/4: mach-realview: expose PB1176 ROM using physmap and map_rom
  ARM: 7098/1: kdump: copy kernel relocation code at the kexec prepare stage
  ARM: 7062/1: cache: detect PIPT I-cache using CTR
  ARM: platform fixups: remove mdesc argument to fixup function
  ARM: 7017/1: Use generic BUG() handler
  ARM: 7102/1: mach-integrator: update defconfig
  ARM: 7087/2: mach-integrator: get timer frequency from clock
  ARM: 7086/2: mach-integrator: modernize clock event registration
  ARM: 7085/2: mach-integrator: clockevent supports oneshot mode
  ARM: 7084/1: mach-integrator: retire some timer macros
  ...

Conflicts:
	drivers/hid/hid-core.c
	drivers/hid/hid-ids.h

Conflicts:
	drivers/hid/hid-wacom.c

* 'next' of git://selinuxproject.org/~jmorris/linux-security: (95 commits)
  TOMOYO: Fix incomplete read after seek.
  Smack: allow to access /smack/access as normal user
  TOMOYO: Fix unused kernel config option.
  Smack: fix: invalid length set for the result of /smack/access
  Smack: compilation fix
  Smack: fix for /smack/access output, use string instead of byte
  Smack: domain transition protections (v3)
  Smack: Provide information for UDS getsockopt(SO_PEERCRED)
  Smack: Clean up comments
  Smack: Repair processing of fcntl
  Smack: Rule list lookup performance
  Smack: check permissions from user space (v2)
  TOMOYO: Fix quota and garbage collector.
  TOMOYO: Remove redundant tasklist_lock.
  TOMOYO: Fix domain transition failure warning.
  TOMOYO: Remove tomoyo_policy_memory_lock spinlock.
  TOMOYO: Simplify garbage collector.
  TOMOYO: Fix make namespacecheck warnings.
  target: check hex2bin result
  encrypted-keys: check hex2bin result
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Finally remove leftover markers sections
  m68k/mac: Fix mac_irq_pending() for PSC MACE and SCC
  m68k/mac: Fix compiler warning in via_read_time()
  zorro: Fix four checkpatch warnings

Conflicts:
	arch/arm/mach-integrator/integrator_ap.c

Merge branches 'stable/drivers-3.2', 'stable/drivers.bugfixes-3.2' and 'stable/pci.fixes-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

* 'stable/drivers-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xenbus: don't rely on xen_initial_domain to detect local xenstore
  xenbus: Fix loopback event channel assuming domain 0
  xen/pv-on-hvm:kexec: Fix implicit declaration of function 'xen_hvm_domain'
  xen/pv-on-hvm kexec: add xs_reset_watches to shutdown watches from old kernel
  xen/pv-on-hvm kexec: update xs_wire.h:xsd_sockmsg_type from xen-unstable
  xen/pv-on-hvm kexec+kdump: reset PV devices in kexec or crash kernel
  xen/pv-on-hvm kexec: rebind virqs to existing eventchannel ports
  xen/pv-on-hvm kexec: prevent crash in xenwatch_thread() when stale watch events arrive

* 'stable/drivers.bugfixes-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/pciback: Check if the device is found instead of blindly assuming so.
  xen/pciback: Do not dereference psdev during printk when it is NULL.
  xen: remove XEN_PLATFORM_PCI config option
  xen: XEN_PVHVM depends on PCI
  xen/pciback: double lock typo
  xen/pciback: use mutex rather than spinlock in vpci backend
  xen/pciback: Use mutexes when working with Xenbus state transitions.
  xen/pciback: miscellaneous adjustments
  xen/pciback: use mutex rather than spinlock in passthrough backend
  xen/pciback: use resource_size()

* 'stable/pci.fixes-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/pci: support multi-segment systems
  xen-swiotlb: When doing coherent alloc/dealloc check before swizzling the MFNs.
  xen/pci: make bus notifier handler return sane values
  xen-swiotlb: fix printk and panic args
  xen-swiotlb: Fix wrong panic.
  xen-swiotlb: Retry up three times to allocate Xen-SWIOTLB
  xen-pcifront: Update warning comment to use 'e820_host' option.

Merge branches 'arnd-randcfg-fixes', 'debug', 'io' (early part), 'l2x0', 'p2v', 'pgt' (early part) and 'smp' into for-linus

Merge branches 'stable/bug.fixes-3.2' and 'stable/mmu.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

* 'stable/bug.fixes-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/p2m/debugfs: Make type_name more obvious.
  xen/p2m/debugfs: Fix potential pointer exception.
  xen/enlighten: Fix compile warnings and set cx to known value.
  xen/xenbus: Remove the unnecessary check.
  xen/irq: If we fail during msi_capability_init return proper error code.
  xen/events: Don't check the info for NULL as it is already done.
  xen/events: BUG() when we can't allocate our event->irq array.

* 'stable/mmu.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: Fix selfballooning and ensure it doesn't go too far
  xen/gntdev: Fix sleep-inside-spinlock
  xen: modify kernel mappings corresponding to granted pages
  xen: add an "highmem" parameter to alloc_xenballooned_pages
  xen/p2m: Use SetPagePrivate and its friends for M2P overrides.
  xen/p2m: Make debug/xen/mmu/p2m visible again.
  Revert "xen/debug: WARN_ON when identity PFN has no _PAGE_IOMAP flag set."

* 'stable/e820-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: release all pages within 1-1 p2m mappings
  xen: allow extra memory to be in multiple regions
  xen: allow balloon driver to use more than one memory region
  xen/balloon: simplify test for the end of usable RAM
  xen/balloon: account for pages released during memory setup

When compiling an i386_defconfig kernel with gcc-4.6.1-9.fc15.i686, I
noticed a warning about the asm operand for test_bit in kprobes'
can_boost.  I discovered that this caused only the first long of
twobyte_is_boostable[] to be output.

Jakub filed and fixed gcc PR50571 to correct the warning and this output
issue.  But to solve it for less current gcc, we can make kprobes'
twobyte_is_boostable[] non-const, and it won't be optimized out.

Before:

    CC      arch/x86/kernel/kprobes.o
  In file included from include/linux/bitops.h:22:0,
                   from include/linux/kernel.h:17,
                   from [...]/arch/x86/include/asm/percpu.h:44,
                   from [...]/arch/x86/include/asm/current.h:5,
                   from [...]/arch/x86/include/asm/processor.h:15,
                   from [...]/arch/x86/include/asm/atomic.h:6,
                   from include/linux/atomic.h:4,
                   from include/linux/mutex.h:18,
                   from include/linux/notifier.h:13,
                   from include/linux/kprobes.h:34,
                   from arch/x86/kernel/kprobes.c:43:
  [...]/arch/x86/include/asm/bitops.h: In function ‘can_boost.part.1’:
  [...]/arch/x86/include/asm/bitops.h:319:2: warning: use of memory input
        without lvalue in asm operand 1 is deprecated [enabled by default]

  $ objdump -rd arch/x86/kernel/kprobes.o | grep -A1 -w bt
       551:	0f a3 05 00 00 00 00 	bt     %eax,0x0
                          554: R_386_32	.rodata.cst4

  $ objdump -s -j .rodata.cst4 -j .data arch/x86/kernel/kprobes.o

  arch/x86/kernel/kprobes.o:     file format elf32-i386

  Contents of section .data:
   0000 48000000 00000000 00000000 00000000  H...............
  Contents of section .rodata.cst4:
   0000 4c030000                             L...

Only a single long of twobyte_is_boostable[] is in the object file.

After, without the const on twobyte_is_boostable:

  $ objdump -rd arch/x86/kernel/kprobes.o | grep -A1 -w bt
       551:	0f a3 05 20 00 00 00 	bt     %eax,0x20
                          554: R_386_32	.data

  $ objdump -s -j .rodata.cst4 -j .data arch/x86/kernel/kprobes.o

  arch/x86/kernel/kprobes.o:     file format elf32-i386

  Contents of section .data:
   0000 48000000 00000000 00000000 00000000  H...............
   0010 00000000 00000000 00000000 00000000  ................
   0020 4c030000 0f000200 ffff0000 ffcff0c0  L...............
   0030 0000ffff 3bbbfff8 03ff2ebb 26bb2e77  ....;.......&..w

Now all 32 bytes are output into .data instead.
Signed-off-by: NJosh Stone <jistone@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes the following compile warning in target_core_cdb.c in
recent linux-next code due to the new use of EXPORT_SYMBOL() for
target_get_task_cdb().

drivers/target/target_core_cdb.c:1316: warning: data definition has no type or storage class
drivers/target/target_core_cdb.c:1316: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL’
drivers/target/target_core_cdb.c:1316: warning: parameter names (without types) in function declaration

Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Markers have removed already twice:

1: fc537766
2: eb878b3b

But a little bit is still here.
Signed-off-by: NTkhai Kirill <tkhai@yandex.ru>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

Add missing return statement. The docs say that the level 4 PSC IRQs
relate to MACE DMA and SCC. Since those drivers don't call
mac_irq_pending() this patch has no affect. But it should be fixed all the
same, since it can be useful for MACE debugging.
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

The algorithm described in the comment compares two reads from the RTC but
the code actually reads once and compares the result to an uninitialized
value. This causes the compiler to warn, "last_result maybe used
uninitialized". Make the code match the comment, fix the warning and
perhaps improve reliability. Tested on a Quadra 700.
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

zorro-driver.c: fix four checkpatch warnings of:
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable

I had a cat. The cat was mine.
His name was Zorro. Amiga is fine.
Signed-off-by: NJim Rotmalm <jim.rotmalm@gmail.com>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

* git://git.infradead.org/iommu-2.6:
  intel-iommu: fix superpage support in pfn_to_dma_pte()
  intel-iommu: set iommu_superpage on VM domains to lowest common denominator
  intel-iommu: fix return value of iommu_unmap() API
  MAINTAINERS: Update VT-d entry for drivers/pci -> drivers/iommu move
  intel-iommu: Export a flag indicating that the IOMMU is used for iGFX.
  intel-iommu: Workaround IOTLB hang on Ironlake GPU
  intel-iommu: Fix AB-BA lockdep report

* 'for-linus' of http://people.redhat.com/agk/git/linux-dm:
  dm kcopyd: fix job_pool leak

Commit 4b239f45 ("x86-64, mm: Put early page table high") causes a S4
regression since 2.6.39, namely the machine reboots occasionally at S4
resume.  It doesn't happen always, overall rate is about 1/20.  But,
like other bugs, once when this happens, it continues to happen.

This patch fixes the problem by essentially reverting the memory
assignment in the older way.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Yinghai Lu <yinghai.lu@oracle.com>
[ We'll hopefully find the real fix, but that's too late for 3.1 now ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch removes the legacy usage of se_task->task_timer and associated
infrastructure that originally was used as a way to help manage buggy backend
SCSI LLDs that in certain cases would never return back an outstanding task.

This includes the removal of target_complete_timeout_work(), timeout logic
from transport_complete_task(), transport_task_timeout_handler(),
transport_start_task_timer(), the per device task_timeout configfs attribute,
and all task_timeout associated structure members and defines in
target_core_base.h

This is being removed in preparation to make transport_complete_task() run
in lock-less mode.

Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch converts target-core to use se_cmd->t_transport_sent instead of
a duplicated se_cmd->transport_sent member in a handful of locations.
It also updates iscsi_target to properly use ->t_transport_sent instead of
it's own iscsi_cmd_t->transport_sent value that was not being assigned.
Reported-by: NChristoph Hellwig <hch@lst.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

If we only have a single task per command (which at least in my testing
is the by far most common case) we do not have to allocate a new per-task
S/G list but can reuse the one from the command.

(nab: Fix BIDI handling in transport_free_dev_tasks)
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch fixes a bug for BIDI handling in transport_generic_new_cmd() where
cmd->t_task_cdbs_left and Co. where not taking into account the extra
task count generated during the first call to transport_allocate_data_tasks().

Cc: Christoph Hellwig <hch@lst.de>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

There were only two callers, and one of them always wants the call
to transport_allocate_data_tasks anyway.  Also drop the constant
lba argument to transport_allocate_data_tasks and move the variables
inside it into the minimum required scope.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

These are two fairly small functions, and merging them gives a much
more readable control flow, and opportunities for more useful comments.

It also moves all code related to resources allocation closer together
and allows to remove a forward declaration for transport_allocate_tasks.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This field is never used given that BIDI handling happens at the
command and not the task level.  Remove it and the dead code in
pscsi that tries to work on it.

It also prevents pSCSI passthrough for the two currently enabled BIDI
commands now that task->task_sg_bidi support has been removed.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Remove the now unnecessary extra call to transport_subsystem_check_init() in
target_core_register_fabric(), and also merge transport_subsystem_reqmods()
directly into transport_subsystem_check_init().
Reported-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Instead of abusing the target processing thread for offloading I/O
completion in the backends to user context add a new workqueue.  This means
completions can be processed as fast as available CPU time allows it,
including in parallel with other completions and more importantly I/O
submission or QUEUE FULL retries.  This should give much better performance
especially on loaded systems.

As a fallout we can merge all the completed states into a single
one.

On the downside this change complicates lun reset handling a bit by
requiring us to cancel a work item only for those states that have it
initialized.  The alternative would be to either always initialize the work
item to a dummy handler, or always use the same handler and do a switch on
the state. The long term solution will be a flag that says that the command
has an initialized work item, but that's only going to be useful once we
have more users.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

We never check for this state, and it makes testing for a completed
state much harder given that it overrides the existing state.

Also remove the unused deferred_t_state which is related to it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

We never queue an command with this state, and only set it in a completely
bogus place in tcm_fc.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

We only need to decrement dev->depth_left if failing a command from
__transport_execute_tasks.  Instead of doing it first thing in
transport_generic_request_failure and requiring a pseudo-flag argument
for it just opencode the decrement in the two callers (which should
be factored into a single one anyway)
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Currently we stop the timers for all tasks in a command fairly late during
I/O completion, which is fairly pointless and requires all kinds of safety
checks.

Instead delete pending timers early on in transport_complete_task, thus
ensuring no new timers firest after that.  We take t_state_lock a bit later
in that function thus making sure currenly running timers are out of the
criticial section.  To be completely sure the timer has finished we also
add another del_timer_sync call when freeing the task.

This also allows removing TF_TIMER_RUNNING as it would be equivalent
to TF_ACTIVE now.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

TF_TIMER_STOP is useless as it only helps to mitigate a tiny race during
deleting the timer.  But given that we have cleared TF_ACTIVE at this point
we already have another mitigation a few lines down the function.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>