Rather than open-coding our own check, use irq_has_action()
to check if an irq has an action - ie. is "in use".

irq_has_action() doesn't take the descriptor lock, but it
shouldn't matter - we're just using it as an indicator
that the irq is in use. disable_irq_nosync() will take
the descriptor lock before doing anything also.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The irq_desc array consumes quite a lot of space, and for systems
that don't need or can't have 512 irqs it's just wasted space.

The first 16 are reserved for ISA, so the minimum of 32 is really
16 - and no one has asked for more than 512 so leave that as the
maximum.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The CHRP code has some fishy timer based code to scan the RTAS event
log, which uses a 1KB stack buffer and doesn't even use the results.

The pSeries code as a nicer daemon that allows userspace to read the
event log and basically uses the same RTAS interface

This patch moves rtasd.c out of platform/pseries and makes it usable
by CHRP, after removing the old crufty event log mechanism in there.

The nvram logging part of the daemon is still only available on 64-bit
since the underlying nvram management routines aren't currently shared.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Some of the stuff in /proc/ppc64 such as the RTAS bits are actually
useful to some 32-bit platforms. Rename the file, and create a
symlink on 64-bit for backward compatibility
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Just as with kexec, hibernation may fail even on well-tested platforms:
some PCI device, a driver of which doesn't play well with hibernation,
is enough to break resuming.

Hibernation code is not much platform dependent, and hiding features only
because these were not verified on a particular hardware is
counterproductive: we just prevent the features from being widely tested.

For example, with this patch I just tested hibernation on a MPC83xx
board, and it works quite well, modulo a few drivers that need some
fixing.

So, let's make it possible to select hibernation support for all
PowerPCs, then let's wait for any possible bug reports, and actually fix
(or just collect ;-) the bugs instead of hiding them. If some platforms
really can't stand hibernation, we can make a blacklist, with proper
comments why exactly hibernation doesn't work, whether it is possible to
fix, and what needs to be done to fix it.

CONFIG_HIBERNATION is still =n by default, so the commit doesn't change
anything apart from ability to set it to =y.

I'm not sure if EXPERIMENTAL dependency is needed, I'd rather not add it
for a few reasons:

1) It doesn't matter much, for distro kernels user has no clue that some
   feature is experimental. Majority of defconfigs enable EXPERIMENTAL
   anyway (90 vs. 4, which, btw, means that EXPERIMENTAL is overused
   in Kconfigs);

2) EXPERIMENTAL is a good thing for features that change default
   behaviour of a kernel, while for hibernation user has to explicitly
   issue 'echo disk > /sys/power/state' to trigger any hibernation bugs;

3) Per init/Kconfig, EXPERIMENTAL is a good thing to scare and discourage
   users from 'widespread use of a feature', while we want to encourage
   that use.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The non-debug case in ps3/mm.c uses pr_debug(), so that the compiler
still does type checks etc. and doesn't complain about unused
variables in the non-debug case.

However with DEBUG=n and CONFIG_DYNAMIC_DEBUG=y there's still code
generated for those pr_debugs().

size before:
   text    data     bss     dec     hex filename
  17553	   4112	     88	  21753	   54f9	arch/powerpc/platforms/ps3/mm.o

size after:
   text    data     bss     dec     hex filename
   7377	    776	     88	   8241	   2031	arch/powerpc/platforms/ps3/mm.o
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

syscallno is unsigned
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

xen_setup_stackprotector() ends up trying to set page protections,
so we need to have vm_mmu_ops set up before trying to do so.
Failing to do so causes an early boot crash.

[ Impact: Fix early crash under Xen. ]
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

Based on an original patch by Valentine Barshak <vbarshak@ru.mvista.com>

Use preempt_schedule_irq to prevent infinite irq-entry and
eventual stack overflow problems with fast-paced IRQ sources.

This kind of problems has been observed on the PASemi Electra IDE
controller. We have to make sure we are soft-disabled before calling
preempt_schedule_irq and hard disable interrupts after that
to avoid unrecoverable exceptions.

This patch also moves the "clrrdi r9,r1,THREAD_SHIFT" out of
the #ifdef CONFIG_PPC_BOOK3E scope, since r9 is clobbered
and has to be restored in both cases.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Fix the following 3 issues:

arch/powerpc/kernel/process.c: In function 'arch_randomize_brk':
arch/powerpc/kernel/process.c:1183: error: 'mmu_highuser_ssize' undeclared (first use in this function)
arch/powerpc/kernel/process.c:1183: error: (Each undeclared identifier is reported only once
arch/powerpc/kernel/process.c:1183: error: for each function it appears in.)
arch/powerpc/kernel/process.c:1183: error: 'MMU_SEGSIZE_1T' undeclared (first use in this function)

In file included from arch/powerpc/kernel/setup_64.c:60:
arch/powerpc/include/asm/mmu-hash64.h:132: error: redefinition of 'struct mmu_psize_def'
arch/powerpc/include/asm/mmu-hash64.h:159: error: expected identifier or '(' before numeric constant
arch/powerpc/include/asm/mmu-hash64.h:396: error: conflicting types for 'mm_context_t'
arch/powerpc/include/asm/mmu-book3e.h:184: error: previous declaration of 'mm_context_t' was here

cc1: warnings being treated as errors
arch/powerpc/kernel/pci_64.c: In function 'pcibios_unmap_io_space':
arch/powerpc/kernel/pci_64.c:100: error: unused variable 'res'
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This defconfig's purpose at this time is to help catch compile errors
between Book-3S and Book-3E support in ppc64.  It is based on the
ppc64_defconfig with some things disabled that we dont support on
Book-3E right now (hugetlbfs, slices, etc.)
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Prior to the arch/ppc -> arch/powerpc transition, xmon had support for single
stepping on 4xx boards.  The functionality was lost when arch/ppc was removed.
This patch restores single step support for 44x boards, and Book-E in general.
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The ABI specifies a 64K alignment, we need to map the vDSO accordingly
Signed-off-by: NAndreas Schwab <schwab@linux-m68k.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Due to missing segment assignments the .text section was put in the NOTES
segment (and marked as NOTE section), and the .got was put in the DYNAMIC
segment.
Signed-off-by: NAndreas Schwab <schwab@linux-m68k.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The creation of the flattened device tree depended on the compiler
putting the constant strings for an object in a section with a
particular name.  This was changed with recent compilers.  Do this
explicitly instead.

Without this patch, iseries kernels may silently not boot when built with
some compilers.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The architecture defines that if MSR PR is set we are in problem state
irrespective of the HV bit.  This fixes perf events to reflect this.

Also, on bare metal systems, samples taken in Linux will now be reported
as kernel rather than hypervisor.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
CC: paulus@samba.org
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The hugetlb dependencies presently depend on SUPERH && MMU while the
hugetlb page size definitions depend on CPU_SH4 or CPU_SH5. This
unfortunately allows SH-3 + MMU configurations to enable hugetlbfs
without a corresponding HPAGE_SHIFT definition, resulting in the build
blowing up.

As SH-3 doesn't support variable page sizes, we tighten up the
dependenies a bit to prevent hugetlbfs from being enabled. These days
we also have a shiny new SYS_SUPPORTS_HUGETLBFS, so switch to using
that rather than adding to the list of corner cases in fs/Kconfig.
Reported-by: NKristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This was missing from the previous patch.
Reported-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Add an uImage.bin target to allow uncompressed uImages.
Useful for boards with busted u-boot decompression like
the rsk7203 on my desk.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Fix the rsk7203 board code to build with CONFIG_MTD=n.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

When CONFIG_FUNCTION_GRAPH_TRACER is enabled the function graph tracer
may patch return addresses on the stack with the address of
return_to_handler(). This really confuses the DWARF unwinder because it
will try find the caller of return_to_handler(), not the caller of the
real return address.

So teach the DWARF unwinder how to find the real return address whenever
it encounters return_to_handler().

This patch does not cope very well when multiple return addresses on the
stack have been patched. To make it work properly it would require state
to track how many return_to_handler()'s have been seen so that we'd know
where to look in current->curr_ret_stack[]. So for now, instead of
trying to handle this, just moan if more than one return address on the
stack has been patched.
Signed-off-by: NMatt Fleming <matt@console-pimps.org>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

ERROR: "__movmemSI12" [net/unix/unix.ko] undefined!
ERROR: "__movmemSI52" [net/ipv6/sit.ko] undefined!
ERROR: "__movmemSI24" [net/ipv6/ipv6.ko] undefined!
ERROR: "__movmemSI60" [net/ipv6/ipv6.ko] undefined!
ERROR: "__movmemSI16" [net/ipv6/ipv6.ko] undefined!
ERROR: "__movmemSI20" [net/ipv6/ipv6.ko] undefined!
ERROR: "__movmemSI32" [net/ipv6/ipv6.ko] undefined!
Signed-off-by: NLubomir Rintel <lkundrak@v3.sk>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This adds an __irq_entry annotation for do_IRQ() so that the IRQ
annotation in the function graph tracer works as advertized. We already
have the IRQENTRY section wired up, so this is just a trivial addition
to actually make use of it.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This patch removes the unnecessary UART4 platform which is under
data is wrong because of this

There is a separate platform structure for UART4
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-By: NKevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

This patch enables omap_serial_early_init() function for OMAP4430
SDP. Without this the bootup would throw oops in omap_serial_init().

Note that the ifndef CONFIG_ARCH_OMAP4 is split into two sections
to enable omap_serial_early_init(). This ifndef cannot be removed
until omap4 clock framework is implemented.
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-By: NTony Lindgren <tony@atomide.com>
Reviewed-By: NKevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

UART3 is in the PER powerdomain.  If PER goes idle/inactive
independently of CORE, for UART3 to wakeup it must have its wakeup
enable bits setup in PM_WKEN_PER.  This patch enables these bits.

The reason it works when PER and CORE work together is because when
CORE goes inactive/retention, the IOPAD wakeups are enabled and
trigger UART3 wakeup.

Without this patch, when the UART inactivity timer fires for UART3,
its clocks are disabled and it's unable to wakeup so will be unusable
until PER is awoken by another source.

Another way of testing is by keeping CORE on during suspend but
allowing PER to hit retention

  # echo 3 > /debug/pm_debug/core_pwrdm/suspend

then enter suspend

  # echo mem > /sys/power/state

Without this patch, UART3 will be unable to wakeup the system.
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

With the recent changes omap serial ports match the physical
numbering like they should. Fix the kernel CMDLINE accordingly
so console works.
Signed-off-by: NTony Lindgren <tony@atomide.com>

Otherwise the machine_is_nokia_n8*() does not work.
Signed-off-by: NTony Lindgren <tony@atomide.com>

DSP public peripherals used to work on OMAP1510 based (or all OMAP1 class?)
machines as long as old dspgateway code were present in the l-o tree. For
several months it is no longer included, breaking support for McBSP1 based
audio on Amstrad Delta, for example.

This patch, derived from the old dspgateway code, corrects the problem for the
board by simply taking the DSP out of reset state, I guess. That way, things
should not break when a new dsp code is added to the tree, and the change can
be reverted then.

If there are any reports on McBSP1 or other DSP public peripherals not working
for other OMAP1 machines (I've not heard of any for now), I can prepare a more
general patch providing an extra include file with a helper function defined.

Created and tested against linux-2.6.32-rc5
Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Commit 15ac408e removed enabled_uart
and OMAP_TAG_UART. This works for mach-omap2, but causes issues on
mach-omap1 for some boards as the mach-omap1 serial.c was muxing
pins based on the enabled_uart flag for 15xx.

Fix this by muxing pins in board-*.c files for the 15xx boards for
the uart ports that had enabled_uart flag set before the commit
above.

Tested on Amsdtrad Delta only.

Note that in the future we should add support for powering down
the uarts with a timer like mach-omap2/serial.c does. Otherwise
the enabled uarts will be blocking retention-while-idle.
Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: NTony Lindgren <tony@atomide.com>

A bit (2 << 0) is set both on SECTION and SUPERSECTION. To identify
SUPERSECTION correctly, other bits should be compared too.
Reported-by: N"Srinivas Pulukuru" <srinivas.pulukuru@ti.com>
Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

OMAP sDMA driver API omap_stop_dma() doesn't really stop the dma when used
in linking scenario.

The DMA channel needs to be disabled before resetting the chain.
Also fix clearing of the OMAP_DMA_ACTIVE status in the linked case.

Cc: Hari n <hari.zoom@gmail.com>
Cc: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NVenkatraman S <svenkatr@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

omap: Fix omap-keypad by restoring old keypad.h without breaking omap2 boards that use matrix_keypad

Only mach-omap2 boards are currently using matrix_keypad. Allow
mach-omap1 boards to use the old style keypad.h without breaking.

Created against linux-2.6.32-rc5.
Compile tested with omap_3430sdp_defconfig and rx51_defconfig.
Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Remove the URL listed for Maverick EP9312 since it is not available
and modify the help text appropriately.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NRyan Mallon <ryan@bluewatersys.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Remove unnecessary code in ep93xx_gpio_ab_irq_handler().

The desc calculation for gpio port B was left in when the following
commit was merged.

commit d8aa0251
Author: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date:   Thu Oct 9 13:36:24 2008 +0100

    [ARM] 5298/1: Drop desc_handle_irq()

It's not needed so remove it.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NRyan Mallon <ryan@bluewatersys.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Remove unused prototype for ep93xx_init_time().  This function
is not defined in the kernel.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NRyan Mallon <ryan@bluewatersys.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This updates the U300 to use all the drivers merged in during the
2.6.32 merge window.
Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The macro for the watchdog has been changed from CONFIG_AT91SAM9_WATCHDOG
to CONFIG_AT91SAM9X_WATCHDOG due to AT91CAP9 chips support
Signed-off-by: NYegor Yefremov <yegorslists@googlemail.com>
Acked-by: NAndrew Victor <linux@maxim.org.za>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

When sending a NMI_VECTOR IPI using the UV_HUB_IPI_INT register,
we need to ensure the delivery mode field of that register has
NMI delivery selected.

This makes those IPIs true NMIs, instead of flat IPIs. It
matters to reboot sequences and KGDB, both of which use NMI
IPIs.
Signed-off-by: NRobin Holt <holt@sgi.com>
Acked-by: NJack Steiner <steiner@sgi.com>
Cc: Martin Hicks <mort@sgi.com>
Cc: <stable@kernel.org>
LKML-Reference: <20091020193620.877322000@alcatraz.americas.sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>