AC97 Codec
A single call to the driver suspend/resume method for each device is
enough. The level and SUSPEND_*/RESUME_* arguments are deprecated and
said to be removed eventually anyway (no other subsystem are using them
anymore except platform devices).
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec
Don't use dev.platform_data to store a reference to the containing
ac97_t structure.  Such assignment is redundent since we can deduce the
ac97_t structure location from the contained device structure.  This
sets platform_data free for other purposes.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec
The bus_id is initialized with a generic identifier string which is not
really useful for proper driver matching.  Let the driver decide what it
needs via its probe method instead.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec
No index is templated for si3036 modem controls.
Signed-off-by: NSasha Khapyorsky <sashak@smlink.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec
No index is templated for mdoem controls.
Signed-off-by: NSasha Khapyorsky <sashak@smlink.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AD1889 driver,ATIIXP driver,ATIIXP-modem driver,AZT3328 driver
BT87x driver,CMIPCI driver,CS4281 driver,ENS1370/1+ driver
ES1938 driver,ES1968 driver,FM801 driver,Intel8x0 driver
Intel8x0-modem driver,Maestro3 driver,SonicVibes driver,VIA82xx driver
VIA82xx-modem driver,AC97 Codec,AK4531 codec,au88x0 driver
CA0106 driver,CS46xx driver,EMU10K1/EMU10K2 driver,HDA Codec driver
HDA generic driver,HDA Intel driver,ICE1712 driver,ICE1724 driver
KORG1212 driver,MIXART driver,NM256 driver,Trident driver,YMFPCI driver
Replace kcalloc(1,..) with kzalloc().
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec
Fix the internal speaker problem (e.g. Targa Traveller 826)
with ALC658D codec.  The info is taken from Cyberlink/realtek-modified code.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec
Fix pin47 setting for EAPD control on MSI S270 laptop.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Intel8x0 driver,AC97 Codec
The HP nx6110 laptop needs to have Headphone Jack Sense enabled so
that the internal speakers will be turned off when headphones are
plugged in.

Also ac97_quirk=hp_only is needed to make a single Master volume in
the mixer instead of separate volumes for internal speakers and
headphones, which just confuses the user.
Signed-off-by: NSergey Vlasov <vsu@altlinux.ru>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

AC97 Codec
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

AC97 Codec
The patch fixes the bus_id conflict error when registering two codecs
of the same type (ALSA bug#1334).
Signed-off-by: NBjorge Dijkstra <bjorge@gmx.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec
Make the patch_wolfson_wm97??_specific() functions static again.
This patch was accidentally reverted in rev. 1.92.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

AC97 Codec
Added (minimal) support of VT1617A codec with SPDIF.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Memalloc module,PCM Midlevel,Timer Midlevel,GUS Library,AC97 Codec
ALI5451 driver,RME9652 driver
Make some functions/variables that are used in only one file static.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

AC97 Codec
This patch fixes a problem whereby the WM9713 has modem functionality
incorrectly detected after an AC97 cold reset.

Changes:-

  o Cleared AC97_SCAP_MODEM in wm9713 scaps
Signed-off-by: NLiam Girdwood <liam.girdwood@wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

CMI8330 driver,ENS1370/1+ driver,FM801 driver,VIA82xx driver,AC97 Codec
ALI5451 driver,CS46xx driver,EMU10K1/EMU10K2 driver,HDA Codec driver
ICE1712 driver,ICE1724 driver
Where appropriate, use the SNDRV_CTL_NAME_IEC958 instead of a literal
string.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

AC97 Codec,PCI drivers
I've made the review changes and as requested I've pasted the RFC by
Nicolas below:-

'I would like to know what people think of the following patch.  It
allows for a codec on an AC97 bus to be shared with other drivers which
are completely unrelated to audio.  It registers a new bus type, and
whenever a codec instance is created then a device for it is also
registered with the driver model using that bus type.  This allows, for
example, to use the extra features of the UCB1400 like the touchscreen
interface and the additional GPIOs and ADCs available on that chip for
battery monitoring.  I have a working UCB1400 touchscreen driver here
that simply registers with the driver model happily working alongside
with audio features using this.'

Changes over RFC:-

  o Now matches codec name within codec group.
  o Added ac97_dev_release() to stop kernel complaining about no release
method for device.
  o Added 'config SND_AC97_BUS' to sound/pci/Kconfig and moved 'config
SND_AC97_CODEC' out with the PCI=n statement.
  o module is now called snd-ac97-bus
Signed-off-by: NLiam Girdwood <liam.girdwood@wolfsonmicro.com>
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec
o Enhanced current WM97xx support to provide additional controls and
  use the kcontrol suffix naming convention.
o Added AC97_HAS_NO_MIC, AC97_HAS_NO_TONE and AC97_HAS_NO_STD_PCM.
o Cleaned up WM97xx related comments.
o Removed some wm9713 double mono controls and replaced with stereo
  controls.
Signed-off-by: NLiam Girdwood <liam.girdwood@wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec
Attached patch adds 'Jack Sense' controls for AD1980 and AD1888 chips.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec
remove a variable made obsolete by the last change
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

AC97 Codec
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

ENS1370/1+ driver,ES1968 driver,Intel8x0 driver,VIA82xx driver
VIA82xx-modem driver,AC97 Codec,ALI5451 driver,CS46xx driver
MIXART driver,RME HDSP driver,Trident driver,YMFPCI driver
Description: Fix-up sleeping in sound/pci. These changes fall under the
following two categories:

        1) Replace schedule_timeout() with msleep() to guarantee the
        task delays as expected. This also involved replacing/removing
        custom sleep functions.
        2) Do not assume jiffies will only increment by one if you
        request a 1 jiffy sleep, i.e. use time_after/time_before in
        while loops.
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Intel8x0 driver,AC97 Codec
Fix resume of intel8x0 driver.  The ac97 codec didn't restore some registers
properly, and the restore of ICH4 SPDIF and SDIN settings was missing.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec,ATIIXP driver,VIA82xx driver
To avoid confusion, the structure members vendor/device were renamed
to subvendor/subdevice, because we compare them with PCI subsystem vendor
and subsystem device.
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

AC97 Codec
Simple MC97 modem mixer with two common controls: Off-hook and CID,
and Si3056 MC specific control: Modem Speaker.
Signed-off-by: NSasha Khapyorsky <sashak@smlink.com>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

AC97 Codec
Fixed a wrong bit set in AD1985 surround jack controls.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec
Fixed Mic/CLFE jack sharing on AD1985 codec.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec
Removed the obsolete mixer control for AD1985.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec
The code for AD1980/AD1985/AD1986 codecs forgot to enable the code to
switch the jack sharing bits on AD1888-compatible codecs.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

AC97 Codec
The code for modifying the center/LFE disable bit on AD1888 codecs
accidentally toggled the mute split bit instead.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

AC97 Codec
Add the 'Mic Front Input Switch' control to the mixer for ALC850.
Enabling this input is required for using the front panel microphone
connector with ASUS A8V motherboard.
Signed-off-by: NSergey Vlasov <vsu@altlinux.ru>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

AC97 Codec
ac97_enum mixer elements (e.g., 'Capture Source') did not work because
of wrong bitmask calculation in snd_ac97_get_enum_double() and
snd_ac97_put_enum_double().

https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1072Signed-off-by: NSergey Vlasov <vsu@altlinux.ru>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

AC97 Codec
The handling of shared surround/clfe output jacks with line/mic-in
on some AC97 codecs is improved.

Instead of 'Line-In As Surround' or 'Mic As Center/LFE' switch, two
new enum controls are introduced: 'Channel Mode' and 'Surround Jack Mode'.
The formar changes the current output mode among 2, 4 and 6-channels.
The latter controls whether the jacks are shared or independent.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec
Separated ac97 registers reset for audio and modem (or both) as recommended
in AC97 spec.
Signed-off-by: NSasha Khapyorsky <sashak@smlink.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec
This (especially 12000 -> 8000 sample rate replace) fix popular
'MC97 converters.. not ready' error with modem codecs initializations.
Signed-off-by: NSasha Khapyorsky <sashak@smlink.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec
- Added CM9780 patch
- Fix the SPDIF support on CM9761/CM9780
- Allow the generic enum callback to pass any number (not power of 2)
  as the value mask
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec
Removed unused variables (the old control definitions).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec
Fixed the detection of bit resolution of ac97 mixer controls.
This will fix the problem with TI ac97 codecs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!