Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 29 7月, 2016 2 次提交
    • M
      mm, vmscan: move LRU lists to node · 599d0c95
      由 Mel Gorman 提交于 
      This moves the LRU lists from the zone to the node and related data such
as counters, tracing, congestion tracking and writeback tracking.

Unfortunately, due to reclaim and compaction retry logic, it is
necessary to account for the number of LRU pages on both zone and node
logic.  Most reclaim logic is based on the node counters but the retry
logic uses the zone counters which do not distinguish inactive and
active sizes.  It would be possible to leave the LRU counters on a
per-zone basis but it's a heavier calculation across multiple cache
lines that is much more frequent than the retry checks.

Other than the LRU counters, this is mostly a mechanical patch but note
that it introduces a number of anomalies.  For example, the scans are
per-zone but using per-node counters.  We also mark a node as congested
when a zone is congested.  This causes weird problems that are fixed
later but is easier to review.

In the event that there is excessive overhead on 32-bit systems due to
the nodes being on LRU then there are two potential solutions

1. Long-term isolation of highmem pages when reclaim is lowmem

   When pages are skipped, they are immediately added back onto the LRU
   list. If lowmem reclaim persisted for long periods of time, the same
   highmem pages get continually scanned. The idea would be that lowmem
   keeps those pages on a separate list until a reclaim for highmem pages
   arrives that splices the highmem pages back onto the LRU. It potentially
   could be implemented similar to the UNEVICTABLE list.

   That would reduce the skip rate with the potential corner case is that
   highmem pages have to be scanned and reclaimed to free lowmem slab pages.

2. Linear scan lowmem pages if the initial LRU shrink fails

   This will break LRU ordering but may be preferable and faster during
   memory pressure than skipping LRU pages.

Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.netSigned-off-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      599d0c95
    • J
      mm: fix vm-scalability regression in cgroup-aware workingset code · 55779ec7
      由 Johannes Weiner 提交于 
      Commit 23047a96 ("mm: workingset: per-cgroup cache thrash
detection") added a page->mem_cgroup lookup to the cache eviction,
refault, and activation paths, as well as locking to the activation
path, and the vm-scalability tests showed a regression of -23%.

While the test in question is an artificial worst-case scenario that
doesn't occur in real workloads - reading two sparse files in parallel
at full CPU speed just to hammer the LRU paths - there is still some
optimizations that can be done in those paths.

Inline the lookup functions to eliminate calls.  Also, page->mem_cgroup
doesn't need to be stabilized when counting an activation; we merely
need to hold the RCU lock to prevent the memcg from being freed.

This cuts down on overhead quite a bit:

23047a96 063f6715e77a7be5770d6081fe
---------------- --------------------------
         %stddev     %change         %stddev
             \          |                \
  21621405 +- 0%     +11.3%   24069657 +- 2%  vm-scalability.throughput

[linux@roeck-us.net: drop unnecessary include file]
[hannes@cmpxchg.org: add WARN_ON_ONCE()s]
  Link: http://lkml.kernel.org/r/20160707194024.GA26580@cmpxchg.org
Link: http://lkml.kernel.org/r/20160624175101.GA3024@cmpxchg.orgReported-by: NYe Xiaolong <xiaolong.ye@intel.com>
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      55779ec7
  3. 27 7月, 2016 1 次提交
  5. 23 7月, 2016 1 次提交
    • J
      mm: memcontrol: fix cgroup creation failure after many small jobs · 73f576c0
      由 Johannes Weiner 提交于 
      The memory controller has quite a bit of state that usually outlives the
cgroup and pins its CSS until said state disappears.  At the same time
it imposes a 16-bit limit on the CSS ID space to economically store IDs
in the wild.  Consequently, when we use cgroups to contain frequent but
small and short-lived jobs that leave behind some page cache, we quickly
run into the 64k limitations of outstanding CSSs.  Creating a new cgroup
fails with -ENOSPC while there are only a few, or even no user-visible
cgroups in existence.

Although pinning CSSs past cgroup removal is common, there are only two
instances that actually need an ID after a cgroup is deleted: cache
shadow entries and swapout records.

Cache shadow entries reference the ID weakly and can deal with the CSS
having disappeared when it's looked up later.  They pose no hurdle.

Swap-out records do need to pin the css to hierarchically attribute
swapins after the cgroup has been deleted; though the only pages that
remain swapped out after offlining are tmpfs/shmem pages.  And those
references are under the user's control, so they are manageable.

This patch introduces a private 16-bit memcg ID and switches swap and
cache shadow entries over to using that.  This ID can then be recycled
after offlining when the CSS remains pinned only by objects that don't
specifically need it.

This script demonstrates the problem by faulting one cache page in a new
cgroup and deleting it again:

  set -e
  mkdir -p pages
  for x in `seq 128000`; do
    [ $((x % 1000)) -eq 0 ] && echo $x
    mkdir /cgroup/foo
    echo $$ >/cgroup/foo/cgroup.procs
    echo trex >pages/$x
    echo $$ >/cgroup/cgroup.procs
    rmdir /cgroup/foo
  done

When run on an unpatched kernel, we eventually run out of possible IDs
even though there are no visible cgroups:

  [root@ham ~]# ./cssidstress.sh
  [...]
  65000
  mkdir: cannot create directory '/cgroup/foo': No space left on device

After this patch, the IDs get released upon cgroup destruction and the
cache and css objects get released once memory reclaim kicks in.

[hannes@cmpxchg.org: init the IDR]
  Link: http://lkml.kernel.org/r/20160621154601.GA22431@cmpxchg.org
Fixes: b2052564 ("mm: memcontrol: continue cache reclaim from offlined groups")
Link: http://lkml.kernel.org/r/20160617162516.GD19084@cmpxchg.orgSigned-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reported-by: NJohn Garcia <john.garcia@mesosphere.io>
Reviewed-by: NVladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: NTejun Heo <tj@kernel.org>
Cc: Nikolay Borisov <kernel@kyup.com>
Cc: <stable@vger.kernel.org>	[3.19+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      73f576c0
  7. 21 5月, 2016 1 次提交
    • R
      mm: vmscan: reduce size of inactive file list · 59dc76b0
      由 Rik van Riel 提交于 
      The inactive file list should still be large enough to contain readahead
windows and freshly written file data, but it no longer is the only
source for detecting multiple accesses to file pages.  The workingset
refault measurement code causes recently evicted file pages that get
accessed again after a shorter interval to be promoted directly to the
active list.

With that mechanism in place, we can afford to (on a larger system)
dedicate more memory to the active file list, so we can actually cache
more of the frequently used file pages in memory, and not have them
pushed out by streaming writes, once-used streaming file reads, etc.

This can help things like database workloads, where only half the page
cache can currently be used to cache the database working set.  This
patch automatically increases that fraction on larger systems, using the
same ratio that has already been used for anonymous memory.

[hannes@cmpxchg.org: cgroup-awareness]
Signed-off-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reported-by: NAndres Freund <andres@anarazel.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      59dc76b0
  9. 20 5月, 2016 1 次提交
    • H
      mm: update_lru_size do the __mod_zone_page_state · 9d5e6a9f
      由 Hugh Dickins 提交于 
      Konstantin Khlebnikov pointed out (nearly four years ago, when lumpy
reclaim was removed) that lru_size can be updated by -nr_taken once per
call to isolate_lru_pages(), instead of page by page.

Update it inside isolate_lru_pages(), or at its two callsites? I chose
to update it at the callsites, rearranging and grouping the updates by
nr_taken and nr_scanned together in both.

With one exception, mem_cgroup_update_lru_size(,lru,) is then used where
__mod_zone_page_state(,NR_LRU_BASE+lru,) is used; and we shall be adding
some more calls in a future commit.  Make the code a little smaller and
simpler by incorporating stat update in lru_size update.

The exception was move_active_pages_to_lru(), which aggregated the
pgmoved stat update separately from the individual lru_size updates; but
I still think this a simplification worth making.

However, the __mod_zone_page_state is not peculiar to mem_cgroups: so
better use the name update_lru_size, calls mem_cgroup_update_lru_size
when CONFIG_MEMCG.
Signed-off-by: NHugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Yang Shi <yang.shi@linaro.org>
Cc: Ning Qu <quning@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      9d5e6a9f
  11. 18 3月, 2016 4 次提交
  13. 16 3月, 2016 6 次提交
  15. 04 2月, 2016 1 次提交
  17. 21 1月, 2016 9 次提交
  19. 16 1月, 2016 1 次提交
  21. 15 1月, 2016 13 次提交