Replace subsys initcall by module initcall level. Since pinctrl
driver is already launched before gpio driver. It's unnecessary
to set gpio driver in subsys init call level.
Signed-off-by: NHaojian Zhuang <haojian.zhuang@linaro.org>
Tested-by: NDinh Nguyen <dinguyen@altera.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Some architectures (e.g. blackfin) provide gpio API without requiring
GPIOLIB support (ARCH_WANT_OPTIONAL_GPIOLIB).  devm_gpio_* functions
should also work for these architectures, since they do not really
depend on GPIOLIB.

Add a new option GPIO_DEVRES (enabled by default) to control the build
of devres.c.  It also removes the empty version of devm_gpio_*
functions for !GENERIC_GPIO build from linux/gpio.h, and moves the
function declarations from asm-generic/gpio.h into linux/gpio.h.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Use more coherent locking in the driver. Use bitfield to store the GPIO
direction and if the pin is configured as output store the status also in a
bitfiled.
In this way we can just look at these bitfields when we need information
about the pin status and only reach out to the chip when it is needed.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Move most of the global variables inside a private structure and allocate
it dynamically.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The vendor does not provide numbering for gpio pins. Vendor source
exports dedicated gpio pins first, followed by multifunction pins.
As this is what end users expect, this patch changes vt8500 and wm8505
to do the same.
Signed-off-by: NTony Prisk <linux@prisktech.co.nz>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Rename stripe_map_discard to stripe_map_range and reuse it for WRITE
SAME bio processing.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch removes map_info from bio-based device mapper targets.
map_info is still used for request-based targets.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Eliminate struct map_info from dm-snap.

map_info->ptr was used in dm-snap to indicate if the bio was tracked.
If map_info->ptr was non-NULL, the bio was linked in tracked_chunk_hash.

This patch removes the use of map_info->ptr. We determine if the bio was
tracked based on hlist_unhashed(&c->node). If hlist_unhashed is true,
the bio is not tracked, if it is false, the bio is tracked.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch removes endio_hook_pool from dm-thin and uses per-bio data instead.

This patch removes any use of map_info in preparation for the next patch
that removes map_info from bio-based device mapper.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Don't use map_info any more in dm-raid1.

map_info was used for writes to hold the region number. For this purpose
we add a new field dm_bio_details to dm_raid1_bio_record.

map_info was used for reads to hold a pointer to dm_raid1_bio_record (if
the pointer was non-NULL, bio details were saved; if the pointer was
NULL, bio details were not saved). We use
dm_raid1_bio_record.details->bi_bdev for this purpose. If bi_bdev is
NULL, details were not saved, if bi_bdev is non-NULL, details were
saved.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Replace map_info with a per-bio structure "struct per_bio_data" in dm-flakey.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Rename struct read_record to bio_record in dm-raid1.

In the following patch, the structure will be used for both read and
write bios, so rename it.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch moves target_request_nr from map_info to dm_target_io and
makes it accessible with dm_bio_get_target_request_nr.

This patch is a preparation for the next patch that removes map_info.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Replace tracked_chunk_pool with per_bio_data in dm-snap.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Replace io_mempool with per_bio_data in dm-verity.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Replace read_record_pool with per_bio_data in dm-raid1.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Introduce a field per_bio_data_size in struct dm_target.

Targets can set this field in the constructor. If a target sets this
field to a non-zero value, "per_bio_data_size" bytes of auxiliary data
are allocated for each bio submitted to the target. These data can be
used for any purpose by the target and help us improve performance by
removing some per-target mempools.

Per-bio data is accessed with dm_per_bio_data. The
argument data_size must be the same as the value per_bio_data_size in
dm_target.

If the target has a pointer to per_bio_data, it can get a pointer to
the bio with dm_bio_from_per_bio_data() function (data_size must be the
same as the value passed to dm_per_bio_data).
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Add WRITE SAME support to dm-io and make it accessible to
dm_kcopyd_zero().  dm_kcopyd_zero() provides an asynchronous interface
whereas the blkdev_issue_write_same() interface is synchronous.

WRITE SAME is a SCSI command that can be leveraged for more efficient
zeroing of a specified logical extent of a device which supports it.
Only a single zeroed logical block is transfered to the target for each
WRITE SAME and the target then writes that same block across the
specified extent.

The dm thin target uses this.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

The linear target can already support WRITE SAME requests so signal
this by setting num_write_same_requests to 1.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

WRITE SAME bios have a payload that contain a single page.  When
cloning WRITE SAME bios DM has no need to modify the bi_io_vec
attributes (and doing so would be detrimental).  DM need only alter the
start and end of the WRITE SAME bio accordingly.

Rather than duplicate __clone_and_map_discard, factor out a common
function that is also used by __clone_and_map_write_same.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Allow targets to opt in to WRITE SAME support by setting
'num_write_same_requests' in the dm_target structure.

A dm device will only advertise WRITE SAME support if all its
targets and all its underlying devices support it.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

If the parameter buffer is small enough, try to allocate it with kmalloc()
rather than vmalloc().

vmalloc is noticeably slower than kmalloc because it has to manipulate
page tables.

In my tests, on PA-RISC this patch speeds up activation 13 times.
On Opteron this patch speeds up activation by 5%.

This patch introduces a new function free_params() to free the
parameters and this uses new flags that record whether or not vmalloc()
was used and whether or not the input buffer must be wiped after use.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

When allocating memory for the userspace ioctl data, set some
appropriate GPF flags directly instead of using PF_MEMALLOC.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Improve space map error message when unable to allocate a new
metadata block.
Signed-off-by: NJoe Thornber <ejt@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Throttle all errors logged from the IO path by dm thin.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Nearly all of persistent-data is in the IO path so throttle error
messages with DMERR_LIMIT to limit the amount logged when
something has gone wrong.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Reinstate a useful error message when the block manager buffer validator fails.
This was mistakenly eliminated when the block manager was converted to use
dm-bufio.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

If the user does not supply a bitmap region_size to the dm raid target,
a reasonable size is computed automatically.  If this is not a power of 2,
the md code will report an error later.

This patch catches the problem early and rounds the region_size to the
next power of two.
Signed-off-by: NJonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Remove unused @data_block parameter from cell_defer.
Change thin_bio_map to use many returns rather than setting a variable.
Signed-off-by: NJoe Thornber <ejt@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Rename cell_defer_except() to cell_defer_no_holder() which describes
its function more clearly.
Signed-off-by: NJoe Thornber <ejt@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

track_chunk is always called with interrupts enabled. Consequently, we
do not need to save and restore interrupt state in "flags" variable.
This patch changes spin_lock_irqsave to spin_lock_irq and
spin_unlock_irqrestore to spin_unlock_irq.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Use a defined macro DM_ENDIO_INCOMPLETE instead of a numeric constant.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

mempool_alloc can't fail if __GFP_WAIT is specified, so the condition
that tests if read_record is non-NULL is always true.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

If "ignore_discard" is specified when creating the thin pool device then
discard support is disabled for that device.  The pool device's status
should reflect this fact rather than stating "no_discard_passdown"
(which implies discards are enabled but passdown is disabled).
Reported-by: NZdenek Kabelac <zkabelac@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

When deleting nested btrees, the code forgets to delete the innermost
btree.  The thin-metadata code serendipitously compensates for this by
claiming there is one extra layer in the tree.

This patch corrects both problems.
Signed-off-by: NJoe Thornber <ejt@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

When discards are prepared it is best to directly wake the worker that
will process them.  The worker will be woken anyway, via periodic
commit, but there is no reason to not wake_worker here.
Signed-off-by: NJoe Thornber <ejt@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

There is a race when discard bios and non-discard bios are issued
simultaneously to the same block.

Discard support is expensive for all thin devices precisely because you
have to be careful to quiesce the area you're discarding.  DM thin must
handle this conflicting IO pattern (simultaneous non-discard vs discard)
even though a sane application shouldn't be issuing such IO.

The race manifests as follows:

1. A non-discard bio is mapped in thin_bio_map.
   This doesn't lock out parallel activity to the same block.

2. A discard bio is issued to the same block as the non-discard bio.

3. The discard bio is locked in a dm_bio_prison_cell in process_discard
   to lock out parallel activity against the same block.

4. The non-discard bio's mapping continues and its all_io_entry is
   incremented so the bio is accounted for in the thin pool's all_io_ds
   which is a dm_deferred_set used to track time locality of non-discard IO.

5. The non-discard bio is finally locked in a dm_bio_prison_cell in
   process_bio.

The race can result in deadlock, leaving the block layer hanging waiting
for completion of a discard bio that never completes, e.g.:

INFO: task ruby:15354 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
ruby            D ffffffff8160f0e0     0 15354  15314 0x00000000
 ffff8802fb08bc58 0000000000000082 ffff8802fb08bfd8 0000000000012900
 ffff8802fb08a010 0000000000012900 0000000000012900 0000000000012900
 ffff8802fb08bfd8 0000000000012900 ffff8803324b9480 ffff88032c6f14c0
Call Trace:
 [<ffffffff814e5a19>] schedule+0x29/0x70
 [<ffffffff814e3d85>] schedule_timeout+0x195/0x220
 [<ffffffffa06b9bc1>] ? _dm_request+0x111/0x160 [dm_mod]
 [<ffffffff814e589e>] wait_for_common+0x11e/0x190
 [<ffffffff8107a170>] ? try_to_wake_up+0x2b0/0x2b0
 [<ffffffff814e59ed>] wait_for_completion+0x1d/0x20
 [<ffffffff81233289>] blkdev_issue_discard+0x219/0x260
 [<ffffffff81233e79>] blkdev_ioctl+0x6e9/0x7b0
 [<ffffffff8119a65c>] block_ioctl+0x3c/0x40
 [<ffffffff8117539c>] do_vfs_ioctl+0x8c/0x340
 [<ffffffff8119a547>] ? block_llseek+0x67/0xb0
 [<ffffffff811756f1>] sys_ioctl+0xa1/0xb0
 [<ffffffff810561f6>] ? sys_rt_sigprocmask+0x86/0xd0
 [<ffffffff814ef099>] system_call_fastpath+0x16/0x1b

The thinp-test-suite's test_discard_random_sectors reliably hits this
deadlock on fast SSD storage.

The fix for this race is that the all_io_entry for a bio must be
incremented whilst the dm_bio_prison_cell is held for the bio's
associated virtual and physical blocks.  That cell locking wasn't
occurring early enough in thin_bio_map.  This patch fixes this.

Care is taken to always call the new function inc_all_io_entry() with
the relevant cells locked, but they are generally unlocked before
calling issue() to try to avoid holding the cells locked across
generic_submit_request.

Also, now that thin_bio_map may lock bios in a cell, process_bio() is no
longer the only thread that will do so.  Because of this we must be sure
to use cell_defer_except() to release all non-holder entries, that
were added by the other thread, because they must be deferred.

This patch depends on "dm thin: replace dm_cell_release_singleton with
cell_defer_except".
Signed-off-by: NJoe Thornber <ejt@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Cc: stable@vger.kernel.org

Change existing users of the function dm_cell_release_singleton to share
cell_defer_except instead, and then remove the now-unused function.

Everywhere that calls dm_cell_release_singleton, the bio in question
is the holder of the cell.

If there are no non-holder entries in the cell then cell_defer_except
behaves exactly like dm_cell_release_singleton.  Conversely, if there
*are* non-holder entries then dm_cell_release_singleton must not be used
because those entries would need to be deferred.

Consequently, it is safe to replace use of dm_cell_release_singleton
with cell_defer_except.

This patch is a pre-requisite for "dm thin: fix race between
simultaneous io and discards to same block".
Signed-off-by: NJoe Thornber <ejt@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

WRITE SAME bios are not yet handled correctly by device-mapper so
disable their use on device-mapper devices by setting
max_write_same_sectors to zero.

As an example, a ciphertext device is incompatible because the data
gets changed according to the location at which it written and so the
dm crypt target cannot support it.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
Cc: Milan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Abort dm ioctl processing if userspace changes the data_size parameter
after we validated it but before we finished copying the data buffer
from userspace.

The dm ioctl parameters are processed in the following sequence:
 1. ctl_ioctl() calls copy_params();
 2. copy_params() makes a first copy of the fixed-sized portion of the
    userspace parameters into the local variable "tmp";
 3. copy_params() then validates tmp.data_size and allocates a new
    structure big enough to hold the complete data and copies the whole
    userspace buffer there;
 4. ctl_ioctl() reads userspace data the second time and copies the whole
    buffer into the pointer "param";
 5. ctl_ioctl() reads param->data_size without any validation and stores it
    in the variable "input_param_size";
 6. "input_param_size" is further used as the authoritative size of the
    kernel buffer.

The problem is that userspace code could change the contents of user
memory between steps 2 and 4.  In particular, the data_size parameter
can be changed to an invalid value after the kernel has validated it.
This lets userspace force the kernel to access invalid kernel memory.

The fix is to ensure that the size has not changed at step 4.

This patch shouldn't have a security impact because CAP_SYS_ADMIN is
required to run this code, but it should be fixed anyway.
Reported-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Cc: stable@kernel.org