Commit 8dd2cb7e ("block: discard granularity might not be power of
2") changed a couple of 'binary and' operations into modulus operations.
Which turned the harmless case of a zero discard_granularity into a
possible divide-by-zero.

The code also had a much more subtle bug: it was doing the modulus of a
value in bytes using 'sector_t'.  That was always conceptually wrong,
but didn't actually matter back when the code assumed a power-of-two
granularity: we only looked at the low bits anyway.

But with potentially arbitrary sector numbers, using a 'sector_t' to
express bytes is very very wrong: depending on configuration it limits
the starting offset of the device to just 32 bits, and any overflow
would result in a wrong value if the modulus wasn't a power-of-two.

So re-write the code to not only protect against the divide-by-zero, but
to do the starting sector arithmetic in sectors, and using the proper
types.

[ For any mathematicians out there: it also looks monumentally stupid to
  do the 'modulo granularity' operation *twice*, never mind having a "+
  granularity" in the second modulus op.

  But that's the easiest way to avoid negative values or overflow, and
  it is how the original code was done. ]
Reported-by: NIngo Molnar <mingo@kernel.org>
Reported-by: NDoug Anderson <dianders@chromium.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Shaohua Li <shli@fusionio.com>
Acked-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In MD raid case, discard granularity might not be power of 2, for example, a
4-disk raid5 has 3*chunk_size discard granularity. Correct the calculation for
such cases.
Reported-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NShaohua Li <shli@fusionio.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Some request_fn implementations, e.g. scsi_request_fn(), unlock
the queue lock internally. This may result in multiple threads
executing request_fn for the same queue simultaneously. Keep
track of the number of active request_fn calls and make sure that
blk_cleanup_queue() waits until all active request_fn invocations
have finished. A block driver may start cleaning up resources
needed by its request_fn as soon as blk_cleanup_queue() finished,
so blk_cleanup_queue() must wait for all outstanding request_fn
invocations to finish.
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Reported-by: NChanho Min <chanho.min@lge.com>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

A block driver may start cleaning up resources needed by its
request_fn as soon as blk_cleanup_queue() finished, so request_fn
must not be invoked after draining finished. This is important
when blk_run_queue() is invoked without any requests in progress.
As an example, if blk_drain_queue() and scsi_run_queue() run in
parallel, blk_drain_queue() may have finished all requests after
scsi_run_queue() has taken a SCSI device off the starved list but
before that last function has had a chance to run the queue.
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Chanho Min <chanho.min@lge.com>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

QUEUE_FLAG_DEAD is used to indicate that queuing new requests must
stop. After this flag has been set queue draining starts. However,
during the queue draining phase it is still safe to invoke the
queue's request_fn, so QUEUE_FLAG_DYING is a better name for this
flag.

This patch has been generated by running the following command
over the kernel source tree:

git grep -lEw 'blk_queue_dead|QUEUE_FLAG_DEAD' |
    xargs sed -i.tmp -e 's/blk_queue_dead/blk_queue_dying/g'      \
        -e 's/QUEUE_FLAG_DEAD/QUEUE_FLAG_DYING/g';                \
sed -i.tmp -e "s/QUEUE_FLAG_DYING$(printf \\t)*5/QUEUE_FLAG_DYING$(printf \\t)5/g" \
    include/linux/blkdev.h;                                       \
sed -i.tmp -e 's/ DEAD/ DYING/g' -e 's/dead queue/a dying queue/' \
    -e 's/Dead queue/A dying queue/' block/blk-core.c
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Acked-by: NTejun Heo <tj@kernel.org>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Chanho Min <chanho.min@lge.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The WRITE SAME command supported on some SCSI devices allows the same
block to be efficiently replicated throughout a block range. Only a
single logical block is transferred from the host and the storage device
writes the same data to all blocks described by the I/O.

This patch implements support for WRITE SAME in the block layer. The
blkdev_issue_write_same() function can be used by filesystems and block
drivers to replicate a buffer across a block range. This can be used to
efficiently initialize software RAID devices, etc.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Acked-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

 - blk_check_merge_flags() verifies that cmd_flags / bi_rw are
   compatible. This function is called for both req-req and req-bio
   merging.

 - blk_rq_get_max_sectors() and blk_queue_get_max_sectors() can be used
   to query the maximum sector count for a given request or queue. The
   calls will return the right value from the queue limits given the
   type of command (RW, discard, write same, etc.)
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Acked-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Remove special-casing of non-rw fs style requests (discard). The nomerge
flags are consolidated in blk_types.h, and rq_mergeable() and
bio_mergeable() have been modified to use them.

bio_is_rw() is used in place of bio_has_data() a few places. This is
done to to distinguish true reads and writes from other fs type requests
that carry a payload (e.g. write same).
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Acked-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The SCSI discard request merge never worked, and looks no solution
for in future, let's disable it temporarily.
Signed-off-by: NShaohua Li <shli@fusionio.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Add a helper to map a bio to a scatterlist, modelled after
blk_rq_map_sg.

This helper is useful for any driver that wants to create
a scatterlist from its ->make_request_fn method.

Changes in v2:
 - Use __blk_segment_map_sg to avoid duplicated code
 - Add cocbook style function comment

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Shaohua Li <shli@kernel.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMinchan Kim <minchan.kim@gmail.com>
Signed-off-by: NAsias He <asias@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

When a disk has large discard_granularity and small max_discard_sectors,
discards are not split with optimal alignment.  In the limit case of
discard_granularity == max_discard_sectors, no request could be aligned
correctly, so in fact you might end up with no discarded logical blocks
at all.

Another example that helps showing the condition in the patch is with
discard_granularity == 64, max_discard_sectors == 128.  A request that is
submitted for 256 sectors 2..257 will be split in two: 2..129, 130..257.
However, only 2 aligned blocks out of 3 are included in the request;
128..191 may be left intact and not discarded.  With this patch, the
first request will be truncated to ensure good alignment of what's left,
and the split will be 2..127, 128..255, 256..257.  The patch will also
take into account the discard_alignment.

At most one extra request will be introduced, because the first request
will be reduced by at most granularity-1 sectors, and granularity
must be less than max_discard_sectors.  Subsequent requests will run
on round_down(max_discard_sectors, granularity) sectors, as in the
current code.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Tested-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This will allow md/raid to know why the unplug was called,
and will be able to act according - if !from_schedule it
is safe to perform tasks which could themselves schedule.
Signed-off-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Both md and umem has similar code for getting notified on an
blk_finish_plug event.
Centralize this code in block/ and allow each driver to
provide its distinctive difference.
Signed-off-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently, request_queue has one request_list to allocate requests
from regardless of blkcg of the IO being issued.  When the unified
request pool is used up, cfq proportional IO limits become meaningless
- whoever grabs the next request being freed wins the race regardless
of the configured weights.

This can be easily demonstrated by creating a blkio cgroup w/ very low
weight, put a program which can issue a lot of random direct IOs there
and running a sequential IO from a different cgroup.  As soon as the
request pool is used up, the sequential IO bandwidth crashes.

This patch implements per-blkg request_list.  Each blkg has its own
request_list and any IO allocates its request from the matching blkg
making blkcgs completely isolated in terms of request allocation.

* Root blkcg uses the request_list embedded in each request_queue,
  which was renamed to @q->root_rl from @q->rq.  While making blkcg rl
  handling a bit harier, this enables avoiding most overhead for root
  blkcg.

* Queue fullness is properly per request_list but bdi isn't blkcg
  aware yet, so congestion state currently just follows the root
  blkcg.  As writeback isn't aware of blkcg yet, this works okay for
  async congestion but readahead may get the wrong signals.  It's
  better than blkcg completely collapsing with shared request_list but
  needs to be improved with future changes.

* After this change, each block cgroup gets a full request pool making
  resource consumption of each cgroup higher.  This makes allowing
  non-root users to create cgroups less desirable; however, note that
  allowing non-root users to directly manage cgroups is already
  severely broken regardless of this patch - each block cgroup
  consumes kernel memory and skews IO weight (IO weights are not
  hierarchical).

v2: queue-sysfs.txt updated and patch description udpated as suggested
    by Vivek.

v3: blk_get_rl() wasn't checking error return from
    blkg_lookup_create() and may cause oops on lookup failure.  Fix it
    by falling back to root_rl on blkg lookup failures.  This problem
    was spotted by Rakesh Iyer <rni@google.com>.

v4: Updated to accomodate 458f27a9 "block: Avoid missed wakeup in
    request waitqueue".  blk_drain_queue() now wakes up waiters on all
    blkg->rl on the target queue.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Request allocation is about to be made per-blkg meaning that there'll
be multiple request lists.

* Make queue full state per request_list.  blk_*queue_full() functions
  are renamed to blk_*rl_full() and takes @rl instead of @q.

* Rename blk_init_free_list() to blk_init_rl() and make it take @rl
  instead of @q.  Also add @gfp_mask parameter.

* Add blk_exit_rl() instead of destroying rl directly from
  blk_release_queue().

* Add request_list->q and make request alloc/free functions -
  blk_free_request(), [__]freed_request(), __get_request() - take @rl
  instead of @q.

This patch doesn't introduce any functional difference.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Add q->nr_rqs[] which currently behaves the same as q->rq.count[] and
move q->rq.elvpriv to q->nr_rqs_elvpriv.  blk_drain_queue() is updated
to use q->nr_rqs[] instead of q->rq.count[].

These counters separates queue-wide request statistics from the
request list and allow implementation of per-queue request allocation.

While at it, properly indent fields of struct request_list.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This function was only used by btrfs code in btrfs_abort_devices()
(seems in a wrong way).

It was removed in commit d07eb911,
So, Let's remove the dead code to avoid any confusion.

Changes in v2: update commit log, btrfs_abort_devices() was removed
already.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-kernel@vger.kernel.org
Cc: Chris Mason <chris.mason@oracle.com>
Cc: linux-btrfs@vger.kernel.org
Cc: David Sterba <dave@jikos.cz>
Signed-off-by: NAsias He <asias@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

I see builds failing with:

  CC [M]  drivers/mmc/host/dw_mmc.o
In file included from drivers/mmc/host/dw_mmc.c:15:
include/linux/blkdev.h:1404: warning: 'struct task_struct' declared inside parameter list
include/linux/blkdev.h:1404: warning: its scope is only this definition or declaration, which is probably not what you want
include/linux/blkdev.h:1408: warning: 'struct task_struct' declared inside parameter list
include/linux/blkdev.h:1413: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'blk_needs_flush_plug'
make[4]: *** [drivers/mmc/host/dw_mmc.o] Error 1

This is because dw_mmc.c includes linux/blkdev.h as the very first file,
and when CONFIG_BLOCK=n, blkdev.h omits all includes.

As it requires linux/sched.h even when CONFIG_BLOCK=n, move this out of
the #ifdef.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

During the recent blkcg cleanup, most of blkcg API has changed to such
extent that mass renaming wouldn't cause any noticeable pain.  Take
the chance and cleanup the naming.

* Rename blkio_cgroup to blkcg.

* Drop blkio / blkiocg prefixes and consistently use blkcg.

* Rename blkio_group to blkcg_gq, which is consistent with io_cq but
  keep the blkg prefix / variable name.

* Rename policy method type and field names to signify they're dealing
  with policy data.

* Rename blkio_policy_type to blkcg_policy.

This patch doesn't cause any functional change.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

All blkcg policies were assumed to be enabled on all request_queues.
Due to various implementation obstacles, during the recent blkcg core
updates, this was temporarily implemented as shooting down all !root
blkgs on elevator switch and policy [de]registration combined with
half-broken in-place root blkg updates.  In addition to being buggy
and racy, this meant losing all blkcg configurations across those
events.

Now that blkcg is cleaned up enough, this patch replaces the temporary
implementation with proper per-queue policy activation.  Each blkcg
policy should call the new blkcg_[de]activate_policy() to enable and
disable the policy on a specific queue.  blkcg_activate_policy()
allocates and installs policy data for the policy for all existing
blkgs.  blkcg_deactivate_policy() does the reverse.  If a policy is
not enabled for a given queue, blkg printing / config functions skip
the respective blkg for the queue.

blkcg_activate_policy() also takes care of root blkg creation, and
cfq_init_queue() and blk_throtl_init() are updated accordingly.

This replaces blkcg_bypass_{start|end}() and update_root_blkg_pd()
unnecessary.  Dropped.

v2: cfq_init_queue() was returning uninitialized @ret on root_group
    alloc failure if !CONFIG_CFQ_GROUP_IOSCHED.  Fixed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

With per-queue policy activation, root blkg creation will be moved to
blkcg core.  Add q->root_blkg in preparation.  For blk-throtl, this
replaces throtl_data->root_tg; however, cfq needs to keep
cfqd->root_group for !CONFIG_CFQ_GROUP_IOSCHED.

This is to prepare for per-queue policy activation and doesn't cause
any functional difference.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Remove BLKIO_POLICY_* enums and let blkio_policy_register() allocate
@pol->plid dynamically on registration.  The maximum number of blkcg
policies which can be registered at the same time is defined by
BLKCG_MAX_POLS constant added to include/linux/blkdev.h.

Note that blkio_policy_register() now may fail.  Policy init functions
updated accordingly and unnecessary ifdefs removed from cfq_init().
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Instead of an ugly open coded variant.

Cc: axboe@kernel.dk
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Now that blkg additions / removals are always done under both q and
blkcg locks, the only places RCU locking is necessary are
blkg_lookup[_create]() for lookup w/o blkcg lock.  This patch drops
unncessary RCU locking replacing it with plain blkcg locking as
necessary.

* blkiocg_pre_destroy() already perform proper locking and don't need
  RCU.  Dropped.

* blkio_read_blkg_stats() now uses blkcg->lock instead of RCU read
  lock.  This isn't a hot path.

* Now unnecessary synchronize_rcu() from queue exit paths removed.
  This makes q->nr_blkgs unnecessary.  Dropped.

* RCU annotation on blkg->q removed.

-v2: Vivek pointed out that blkg_lookup_create() still needs to be
     called under rcu_read_lock().  Updated.

-v3: After the update, stats_lock locking in blkio_read_blkg_stats()
     shouldn't be using _irq variant as it otherwise ends up enabling
     irq while blkcg->lock is locked.  Fixed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

With the previous patch to move blkg list heads and counters to
request_queue and blkg, logic to manage them in both policies are
almost identical and can be moved to blkcg core.

This patch moves blkg link logic into blkg_lookup_create(), implements
common blkg unlink code in blkg_destroy(), and updates
blkg_destory_all() so that it's policy specific and can skip root
group.  The updated blkg_destroy_all() is now used to both clear queue
for bypassing and elv switching, and release all blkgs on q exit.

This patch introduces a race window where policy [de]registration may
race against queue blkg clearing.  This can only be a problem on cfq
unload and shouldn't be a real problem in practice (and we have many
other places where this race already exists).  Future patches will
remove these unlikely races.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently, specific policy implementations are responsible for
maintaining list and number of blkgs.  This duplicates code
unnecessarily, and hinders factoring common code and providing blkcg
API with better defined semantics.

After this patch, request_queue hosts list heads and counters and blkg
has list nodes for both policies.  This patch only relocates the
necessary fields and the next patch will actually move management code
into blkcg core.

Note that request_queue->blkg_list[] and ->nr_blkgs[] are hardcoded to
have 2 elements.  This is to avoid include dependency and will be
removed by the next patch.

This patch doesn't introduce any behavior change.

-v2: Now unnecessary conditional on CONFIG_BLK_CGROUP_MODULE removed
     as pointed out by Vivek.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Keep track of all request_queues which have blkcg initialized and turn
on bypass and invoke blkcg_clear_queue() on all before making changes
to blkcg policies.

This is to prepare for moving blkg management into blkcg core.  Note
that this uses more brute force than necessary.  Finer grained shoot
down will be implemented later and given that policy [un]registration
almost never happens on running systems (blk-throtl can't be built as
a module and cfq usually is the builtin default iosched), this
shouldn't be a problem for the time being.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Rename and extend elv_queisce_start/end() to
blk_queue_bypass_start/end() which are exported and supports nesting
via @q->bypass_depth.  Also add blk_queue_bypass() to test bypass
state.

This will be further extended and used for blkio_group management.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

put_io_context() performed a complex trylock dancing to avoid
deferring ioc release to workqueue.  It was also broken on UP because
trylock was always assumed to succeed which resulted in unbalanced
preemption count.

While there are ways to fix the UP breakage, even the most
pathological microbench (forced ioc allocation and tight fork/exit
loop) fails to show any appreciable performance benefit of the
optimization.  Strip it out.  If there turns out to be workloads which
are affected by this change, simpler optimization from the discussion
thread can be applied later.
Signed-off-by: NTejun Heo <tj@kernel.org>
LKML-Reference: <1328514611.21268.66.camel@sli10-conroe>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Linux allows executing the SG_IO ioctl on a partition or LVM volume, and
will pass the command to the underlying block device.  This is
well-known, but it is also a large security problem when (via Unix
permissions, ACLs, SELinux or a combination thereof) a program or user
needs to be granted access only to part of the disk.

This patch lets partitions forward a small set of harmless ioctls;
others are logged with printk so that we can see which ioctls are
actually sent.  In my tests only CDROM_GET_CAPABILITY actually occurred.
Of course it was being sent to a (partition on a) hard disk, so it would
have failed with ENOTTY and the patch isn't changing anything in
practice.  Still, I'm treating it specially to avoid spamming the logs.

In principle, this restriction should include programs running with
CAP_SYS_RAWIO.  If for example I let a program access /dev/sda2 and
/dev/sdb, it still should not be able to read/write outside the
boundaries of /dev/sda2 independent of the capabilities.  However, for
now programs with CAP_SYS_RAWIO will still be allowed to send the
ioctls.  Their actions will still be logged.

This patch does not affect the non-libata IDE driver.  That driver
however already tests for bd != bd->bd_contains before issuing some
ioctl; it could be restricted further to forbid these ioctls even for
programs running with CAP_SYS_ADMIN/CAP_SYS_RAWIO.

Cc: linux-scsi@vger.kernel.org
Cc: Jens Axboe <axboe@kernel.dk>
Cc: James Bottomley <JBottomley@parallels.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
[ Make it also print the command name when warning - Linus ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce a wrapper around scsi_cmd_ioctl that takes a block device.

The function will then be enhanced to detect partition block devices
and, in that case, subject the ioctls to whitelisting.

Cc: linux-scsi@vger.kernel.org
Cc: Jens Axboe <axboe@kernel.dk>
Cc: James Bottomley <JBottomley@parallels.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We prefer to program in C rather than preprocessor and it fixes this
warning when CONFIG_BLK_DEV_INTEGRITY is not set:

drivers/md/dm-table.c: In function 'dm_table_set_integrity':
drivers/md/dm-table.c:1285:3: warning: statement with no effect [-Wunused-value]
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Stacking driver queue limits are typically bounded exclusively by the
capabilities of the low level devices, not by the stacking driver
itself.

This patch introduces blk_set_stacking_limits() which has more liberal
metrics than the default queue limits function. This allows us to
inherit topology parameters from bottom devices without manually
tweaking the default limits in each driver prior to calling the stacking
function.

Since there is now a clear distinction between stacking and low-level
devices, blk_set_default_limits() has been modified to carry the more
conservative values that we used to manually set in
blk_queue_make_request().
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Acked-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Most of icq management is about to be moved out of cfq into blk-ioc.
This patch prepares for it.

* Move cfqd->icq_list to request_queue->icq_list

* Make request explicitly point to icq instead of through elevator
  private data.  ->elevator_private[3] is replaced with sub struct elv
  which contains icq pointer and priv[2].  cfq is updated accordingly.

* Meaningless clearing of ->elevator_private[0] removed from
  elv_set_request().  At that point in code, the field was guaranteed
  to be %NULL anyway.

This patch doesn't introduce any functional change.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

cic is association between io_context and request_queue.  A cic is
linked from both ioc and q and should be destroyed when either one
goes away.  As ioc and q both have their own locks, locking becomes a
bit complex - both orders work for removal from one but not from the
other.

Currently, cfq tries to circumvent this locking order issue with RCU.
ioc->lock nests inside queue_lock but the radix tree and cic's are
also protected by RCU allowing either side to walk their lists without
grabbing lock.

This rather unconventional use of RCU quickly devolves into extremely
fragile convolution.  e.g. The following is from cfqd going away too
soon after ioc and q exits raced.

 general protection fault: 0000 [#1] PREEMPT SMP
 CPU 2
 Modules linked in:
 [   88.503444]
 Pid: 599, comm: hexdump Not tainted 3.1.0-rc10-work+ #158 Bochs Bochs
 RIP: 0010:[<ffffffff81397628>]  [<ffffffff81397628>] cfq_exit_single_io_context+0x58/0xf0
 ...
 Call Trace:
  [<ffffffff81395a4a>] call_for_each_cic+0x5a/0x90
  [<ffffffff81395ab5>] cfq_exit_io_context+0x15/0x20
  [<ffffffff81389130>] exit_io_context+0x100/0x140
  [<ffffffff81098a29>] do_exit+0x579/0x850
  [<ffffffff81098d5b>] do_group_exit+0x5b/0xd0
  [<ffffffff81098de7>] sys_exit_group+0x17/0x20
  [<ffffffff81b02f2b>] system_call_fastpath+0x16/0x1b

The only real hot path here is cic lookup during request
initialization and avoiding extra locking requires very confined use
of RCU.  This patch makes cic removal from both ioc and request_queue
perform double-locking and unlink immediately.

* From q side, the change is almost trivial as ioc->lock nests inside
  queue_lock.  It just needs to grab each ioc->lock as it walks
  cic_list and unlink it.

* From ioc side, it's a bit more difficult because of inversed lock
  order.  ioc needs its lock to walk its cic_list but can't grab the
  matching queue_lock and needs to perform unlock-relock dancing.

  Unlinking is now wholly done from put_io_context() and fast path is
  optimized by using the queue_lock the caller already holds, which is
  by far the most common case.  If the ioc accessed multiple devices,
  it tries with trylock.  In unlikely cases of fast path failure, it
  falls back to full double-locking dance from workqueue.

Double-locking isn't the prettiest thing in the world but it's *far*
simpler and more understandable than RCU trick without adding any
meaningful overhead.

This still leaves a lot of now unnecessary RCU logics.  Future patches
will trim them.

-v2: Vivek pointed out that cic->q was being dereferenced after
     cic->release() was called.  Updated to use local variable @this_q
     instead.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

* blk_get_queue() is peculiar in that it returns 0 on success and 1 on
  failure instead of 0 / -errno or boolean.  Update it such that it
  returns %true on success and %false on failure.

* Make sure the caller checks for the return value.

* Separate out __blk_get_queue() which doesn't check whether @q is
  dead and put it in blk.h.  This will be used later.

This patch doesn't introduce any functional changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

cfq allocates per-queue id using ida and uses it to index cic radix
tree from io_context.  Move it to q->id and allocate on queue init and
free on queue release.  This simplifies cfq a bit and will allow for
further improvements of io context life-cycle management.

This patch doesn't introduce any functional difference.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

There are a number of QUEUE_FLAG_DEAD tests.  Add blk_queue_dead()
macro and use it.

This patch doesn't introduce any functional difference.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The only user left for blk_insert_request() is sx8 and it can be
trivially switched to use blk_execute_rq_nowait() - special requests
aren't included in io stat and sx8 doesn't use block layer tagging.
Switch sx8 and kill blk_insert_requeset().

This patch doesn't introduce any functional difference.

Only compile tested.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NJeff Garzik <jgarzik@pobox.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

struct request_queue is allocated with __GFP_ZERO so its "node" field is
zero before initialization.  This causes an oops if node 0 is offline in
the page allocator because its zonelists are not initialized.  From Dave
Young's dmesg:

	SRAT: Node 1 PXM 2 0-d0000000
	SRAT: Node 1 PXM 2 100000000-330000000
	SRAT: Node 0 PXM 1 330000000-630000000
	Initmem setup node 1 0000000000000000-000000000affb000
	...
	Built 1 zonelists in Node order, mobility grouping on.
	...
	BUG: unable to handle kernel paging request at 0000000000001c08
	IP: [<ffffffff8111c355>] __alloc_pages_nodemask+0xb5/0x870

and __alloc_pages_nodemask+0xb5 translates to a NULL pointer on
zonelist->_zonerefs.

The fix is to initialize q->node at the time of allocation so the correct
node is passed to the slab allocator later.

Since blk_init_allocated_queue_node() is no longer needed, merge it with
blk_init_allocated_queue().

[rientjes@google.com: changelog, initializing q->node]
Cc: stable@vger.kernel.org [2.6.37+]
Reported-by: NDave Young <dyoung@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Tested-by: NDave Young <dyoung@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>