This reverts:

commit d5a42de8 ("net: Add a second bind table hashed by port and address")
commit 538aaf9b ("selftests: Add test for timing a bind request to a port with a populated bhash entry")
Link: https://lore.kernel.org/netdev/20220520001834.2247810-1-kuba@kernel.org/

There are a few things that need to be fixed here:
* Updating bhash2 in cases where the socket's rcv saddr changes
* Adding bhash2 hashbucket locks

Links to syzbot reports:
https://lore.kernel.org/netdev/00000000000022208805e0df247a@google.com/
https://lore.kernel.org/netdev/0000000000003f33bc05dfaf44fe@google.com/

Fixes: d5a42de8 ("net: Add a second bind table hashed by port and address")
Reported-by: syzbot+015d756bbd1f8b5c8f09@syzkaller.appspotmail.com
Reported-by: syzbot+98fd2d1422063b0f8c44@syzkaller.appspotmail.com
Reported-by: syzbot+0a847a982613c6438fba@syzkaller.appspotmail.com
Signed-off-by: NJoanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20220615193213.2419568-1-joannelkoong@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

The skb_recv_datagram() in ax25_recvmsg() will hold lock_sock
and block until it receives a packet from the remote. If the client
doesn`t connect to server and calls read() directly, it will not
receive any packets forever. As a result, the deadlock will happen.

The fail log caused by deadlock is shown below:

[  369.606973] INFO: task ax25_deadlock:157 blocked for more than 245 seconds.
[  369.608919] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  369.613058] Call Trace:
[  369.613315]  <TASK>
[  369.614072]  __schedule+0x2f9/0xb20
[  369.615029]  schedule+0x49/0xb0
[  369.615734]  __lock_sock+0x92/0x100
[  369.616763]  ? destroy_sched_domains_rcu+0x20/0x20
[  369.617941]  lock_sock_nested+0x6e/0x70
[  369.618809]  ax25_bind+0xaa/0x210
[  369.619736]  __sys_bind+0xca/0xf0
[  369.620039]  ? do_futex+0xae/0x1b0
[  369.620387]  ? __x64_sys_futex+0x7c/0x1c0
[  369.620601]  ? fpregs_assert_state_consistent+0x19/0x40
[  369.620613]  __x64_sys_bind+0x11/0x20
[  369.621791]  do_syscall_64+0x3b/0x90
[  369.622423]  entry_SYSCALL_64_after_hwframe+0x46/0xb0
[  369.623319] RIP: 0033:0x7f43c8aa8af7
[  369.624301] RSP: 002b:00007f43c8197ef8 EFLAGS: 00000246 ORIG_RAX: 0000000000000031
[  369.625756] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f43c8aa8af7
[  369.626724] RDX: 0000000000000010 RSI: 000055768e2021d0 RDI: 0000000000000005
[  369.628569] RBP: 00007f43c8197f00 R08: 0000000000000011 R09: 00007f43c8198700
[  369.630208] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff845e6afe
[  369.632240] R13: 00007fff845e6aff R14: 00007f43c8197fc0 R15: 00007f43c8198700

This patch replaces skb_recv_datagram() with an open-coded variant of it
releasing the socket lock before the __skb_wait_for_more_packets() call
and re-acquiring it after such call in order that other functions that
need socket lock could be executed.

what's more, the socket lock will be released only when recvmsg() will
block and that should produce nicer overall behavior.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Suggested-by: NThomas Osterried <thomas@osterried.de>
Signed-off-by: NDuoming Zhou <duoming@zju.edu.cn>
Reported-by: Thomas Habets <thomas@@habets.se>
Acked-by: NPaolo Abeni <pabeni@redhat.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The extra byte inserted by usbnet.c when
 (length % dev->maxpacket == 0) is causing problems to device.

This patch sets FLAG_SEND_ZLP to avoid this.

Tested with: 0b95:1790 ASIX Electronics Corp. AX88179 Gigabit Ethernet

Problems observed:
======================================================================
1) Using ssh/sshfs. The remote sshd daemon can abort with the message:
   "message authentication code incorrect"
   This happens because the tcp message sent is corrupted during the
   USB "Bulk out". The device calculate the tcp checksum and send a
   valid tcp message to the remote sshd. Then the encryption detects
   the error and aborts.
2) NETDEV WATCHDOG: ... (ax88179_178a): transmit queue 0 timed out
3) Stop normal work without any log message.
   The "Bulk in" continue receiving packets normally.
   The host sends "Bulk out" and the device responds with -ECONNRESET.
   (The netusb.c code tx_complete ignore -ECONNRESET)
Under normal conditions these errors take days to happen and in
intense usage take hours.

A test with ping gives packet loss, showing that something is wrong:
ping -4 -s 462 {destination}	# 462 = 512 - 42 - 8
Not all packets fail.
My guess is that the device tries to find another packet starting
at the extra byte and will fail or not depending on the next
bytes (old buffer content).
======================================================================
Signed-off-by: NJose Alonso <joalonsof@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-06-14

This series contains updates to ice driver only.

Michal fixes incorrect Tx timestamp offset calculation for E822 devices.

Roman enforces required VLAN filtering settings for double VLAN mode.

Przemyslaw fixes memory corruption issues with VFs by ensuring
queues are disabled in the error path of VF queue configuration and to
disabled VFs during reset.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Maintainers of the directory Documentation/devicetree/bindings/net
are also the maintainers of the corresponding directory
include/dt-bindings/net.

Add the file entry for include/dt-bindings/net to the appropriate
section in MAINTAINERS.
Signed-off-by: NLukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20220613121826.11484-1-lukas.bulwahn@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Latest drivers version requires phy-mode to be set. Otherwise we will
use "NA" mode and the switch driver will invalidate this port mode.

Fixes: 65ac79e1 ("net: dsa: microchip: add the phylink get_caps")
Signed-off-by: NOleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20220610081621.584393-1-o.rempel@pengutronix.deSigned-off-by: NJakub Kicinski <kuba@kernel.org>

'bgmac' is part of a managed resource allocated with bgmac_alloc(). It
should not be freed explicitly.

Remove the erroneous kfree() from the .remove() function.

Fixes: 34a5102c ("net: bgmac: allocate struct bgmac just once & don't copy it")
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/a026153108dd21239036a032b95c25b5cece253b.1655153616.git.christophe.jaillet@wanadoo.frSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Disable VF's RX/TX queues, when it's disabled. VF can have queues enabled,
when it requests a reset. If PF driver assumes that VF is disabled,
while VF still has queues configured, VF may unmap DMA resources.
In such scenario device still can map packets to memory, which ends up
silently corrupting it.
Previously, VF driver could experience memory corruption, which lead to
crash:
[ 5119.170157] BUG: unable to handle kernel paging request at 00001b9780003237
[ 5119.170166] PGD 0 P4D 0
[ 5119.170173] Oops: 0002 [#1] PREEMPT_RT SMP PTI
[ 5119.170181] CPU: 30 PID: 427592 Comm: kworker/u96:2 Kdump: loaded Tainted: G        W I      --------- -  - 4.18.0-372.9.1.rt7.166.el8.x86_64 #1
[ 5119.170189] Hardware name: Dell Inc. PowerEdge R740/014X06, BIOS 2.3.10 08/15/2019
[ 5119.170193] Workqueue: iavf iavf_adminq_task [iavf]
[ 5119.170219] RIP: 0010:__page_frag_cache_drain+0x5/0x30
[ 5119.170238] Code: 0f 0f b6 77 51 85 f6 74 07 31 d2 e9 05 df ff ff e9 90 fe ff ff 48 8b 05 49 db 33 01 eb b4 0f 1f 80 00 00 00 00 0f 1f 44 00 00 <f0> 29 77 34 74 01 c3 48 8b 07 f6 c4 80 74 0f 0f b6 77 51 85 f6 74
[ 5119.170244] RSP: 0018:ffffa43b0bdcfd78 EFLAGS: 00010282
[ 5119.170250] RAX: ffffffff896b3e40 RBX: ffff8fb282524000 RCX: 0000000000000002
[ 5119.170254] RDX: 0000000049000000 RSI: 0000000000000000 RDI: 00001b9780003203
[ 5119.170259] RBP: ffff8fb248217b00 R08: 0000000000000022 R09: 0000000000000009
[ 5119.170262] R10: 2b849d6300000000 R11: 0000000000000020 R12: 0000000000000000
[ 5119.170265] R13: 0000000000001000 R14: 0000000000000009 R15: 0000000000000000
[ 5119.170269] FS:  0000000000000000(0000) GS:ffff8fb1201c0000(0000) knlGS:0000000000000000
[ 5119.170274] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5119.170279] CR2: 00001b9780003237 CR3: 00000008f3e1a003 CR4: 00000000007726e0
[ 5119.170283] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 5119.170286] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 5119.170290] PKRU: 55555554
[ 5119.170292] Call Trace:
[ 5119.170298]  iavf_clean_rx_ring+0xad/0x110 [iavf]
[ 5119.170324]  iavf_free_rx_resources+0xe/0x50 [iavf]
[ 5119.170342]  iavf_free_all_rx_resources.part.51+0x30/0x40 [iavf]
[ 5119.170358]  iavf_virtchnl_completion+0xd8a/0x15b0 [iavf]
[ 5119.170377]  ? iavf_clean_arq_element+0x210/0x280 [iavf]
[ 5119.170397]  iavf_adminq_task+0x126/0x2e0 [iavf]
[ 5119.170416]  process_one_work+0x18f/0x420
[ 5119.170429]  worker_thread+0x30/0x370
[ 5119.170437]  ? process_one_work+0x420/0x420
[ 5119.170445]  kthread+0x151/0x170
[ 5119.170452]  ? set_kthread_struct+0x40/0x40
[ 5119.170460]  ret_from_fork+0x35/0x40
[ 5119.170477] Modules linked in: iavf sctp ip6_udp_tunnel udp_tunnel mlx4_en mlx4_core nfp tls vhost_net vhost vhost_iotlb tap tun xt_CHECKSUM ipt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink bridge stp llc rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache sunrpc intel_rapl_msr iTCO_wdt iTCO_vendor_support dell_smbios wmi_bmof dell_wmi_descriptor dcdbas kvm_intel kvm irqbypass intel_rapl_common isst_if_common skx_edac irdma nfit libnvdimm x86_pkg_temp_thermal i40e intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ib_uverbs rapl ipmi_ssif intel_cstate intel_uncore mei_me pcspkr acpi_ipmi ib_core mei lpc_ich i2c_i801 ipmi_si ipmi_devintf wmi ipmi_msghandler acpi_power_meter xfs libcrc32c sd_mod t10_pi sg mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ice ahci drm libahci crc32c_intel libata tg3 megaraid_sas
[ 5119.170613]  i2c_algo_bit dm_mirror dm_region_hash dm_log dm_mod fuse [last unloaded: iavf]
[ 5119.170627] CR2: 00001b9780003237

Fixes: ec4f5a43 ("ice: Check if VF is disabled for Opcode and other operations")
Signed-off-by: NPrzemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Co-developed-by: NSlawomir Laba <slawomirx.laba@intel.com>
Signed-off-by: NSlawomir Laba <slawomirx.laba@intel.com>
Signed-off-by: NMateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: NKonrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

Disable VF's RX/TX queues, when VIRTCHNL_OP_CONFIG_VSI_QUEUES fail.
Not disabling them might lead to scenario, where PF driver leaves VF
queues enabled, when VF's VSI failed queue config.
In this scenario VF should not have RX/TX queues enabled. If PF failed
to set up VF's queues, VF will reset due to TX timeouts in VF driver.
Initialize iterator 'i' to -1, so if error happens prior to configuring
queues then error path code will not disable queue 0. Loop that
configures queues will is using same iterator, so error path code will
only disable queues that were configured.

Fixes: 77ca27c4 ("ice: add support for virtchnl_queue_select.[tx|rx]_queues bitmap")
Suggested-by: NSlawomir Laba <slawomirx.laba@intel.com>
Signed-off-by: NPrzemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: NMateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: NKonrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

VLAN filtering features, that is C-Tag and S-Tag, in DVM mode must be
both enabled or disabled.
In case of turning off/on only one of the features, another feature must
be turned off/on automatically with issuing an appropriate message to
the kernel log.

Fixes: 1babaf77 ("ice: Advertise 802.1ad VLAN filtering and offloads for PF netdev")
Signed-off-by: NRoman Storozhenko <roman.storozhenko@intel.com>
Co-developed-by: NAnatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Signed-off-by: NAnatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

The offset was being incorrectly calculated for E822 - that led to
collisions in choosing TX timestamp register location when more than
one port was trying to use timestamping mechanism.

In E822 one quad is being logically split between ports, so quad 0 is
having trackers for ports 0-3, quad 1 ports 4-7 etc. Each port should
have separate memory location for tracking timestamps. Due to error for
example ports 1 and 2 had been assigned to quad 0 with same offset (0),
while port 1 should have offset 0 and 1 offset 16.

Fix it by correctly calculating quad offset.

Fixes: 3a749623 ("ice: implement basic E822 PTP support")
Signed-off-by: NMichal Michalik <michal.michalik@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

Both RIF and ACL flow counters use a 24-bit SW-managed counter address to
communicate which counter they want to bind.

In a number of Spectrum FW releases, binding a RIF counter is broken and
slices the counter index to 16 bits. As a result, on Spectrum-2 and above,
no more than about 410 RIF counters can be effectively used. This
translates to 205 netdevices for which L3 HW stats can be enabled. (This
does not happen on Spectrum-1, because there are fewer counters available
overall and the counter index never exceeds 16 bits.)

Binding counters to ACLs does not have this issue. Therefore reorder the
counter allocation scheme so that RIF counters come first and therefore get
lower indices that are below the 16-bit barrier.

Fixes: 98e60dce ("Merge branch 'mlxsw-Introduce-initial-Spectrum-2-support'")
Reported-by: NMaksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: NPetr Machata <petrm@nvidia.com>
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220613125017.2018162-1-idosch@nvidia.comSigned-off-by: NPaolo Abeni <pabeni@redhat.com>

Write "to be operated" instead of "to be operate".
Signed-off-by: NJonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220610072809.352962-1-j.neuschaefer@gmx.netSigned-off-by: NJakub Kicinski <kuba@kernel.org>

The AMD XGbE driver currently counts the number of interrupts assigned
to the device by inspecting the pdev->resource array. Since commit
a1a2b712 ("of/platform: Drop static setup of IRQ resource from DT
core") removed IRQs from this array, the driver now attempts to get all
interrupts from 1 to -1U and gives up probing once it reaches an invalid
interrupt index.

Obtain the number of IRQs with platform_irq_count() instead.

Fixes: a1a2b712 ("of/platform: Drop static setup of IRQ resource from DT core")
Signed-off-by: NJean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: NRob Herring <robh@kernel.org>
Acked-by: NTom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20220609161457.69614-1-jean-philippe@linaro.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Fixes: 6e144b47 (octeontx2-pf: Add support for adaptive interrupt coalescing)
Added support for VF interfaces as well.
Signed-off-by: NSuman Ghosh <sumang@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

CONFIG_64BIT is not sufficient for checking for availability of
iowrite64() and friends.

Also, the out_addr helpers need to be inline.

Fixes: b690f8df ("net: axienet: Use iowrite64 to write all 64b descriptor pointers")
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Andy Chiu says:

====================
net: axienet: fix DMA Tx error

We ran into multiple DMA TX errors while writing files over a network
block device running on top of a DMA-connected AXI Ethernet device on
64-bit RISC-V machines. The errors indicated that the DMA had fetched a
null descriptor and we found that the reason for this is that AXI DMA had
unexpectedly processed a partially updated tail descriptor pointer. To
fix it, we suggest that the driver should use one 64-bit write instead
of two 32-bit writes to perform such update if possible. For those
archectures where double-word load/stores are unavailable, e.g. 32-bit
archectures, force a driver probe failure if the driver finds 64-bit
capability on DMA.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

According to commit f735c40e ("net: axienet: Autodetect 64-bit DMA
capability") and AXI-DMA spec (pg021), on 64-bit capable dma, only
writing MSB part of tail descriptor pointer causes DMA engine to start
fetching descriptors. However, we found that it is true only if dma is in
idle state. In other words, dma would use a tailp even if it only has LSB
updated, when the dma is running.

The non-atomicity of this behavior could be problematic if enough
delay were introduced in between the 2 writes. For example, if an
interrupt comes right after the LSB write and the cpu spends long
enough time in the handler for the dma to get back into idle state by
completing descriptors, then the seconcd write to MSB would treat dma
to start fetching descriptors again. Since the descriptor next to the
one pointed by current tail pointer is not filled by the kernel yet,
fetching a null descriptor here causes a dma internal error and halt
the dma engine down.

We suggest that the dma engine should start process a 64-bit MMIO write
to the descriptor pointer only if ONE 32-bit part of it is written on all
states. Or we should restrict the use of 64-bit addressable dma on 32-bit
platforms, since those devices have no instruction to guarantee the write
to LSB and MSB part of tail pointer occurs atomically to the dma.

initial condition:
curp =  x-3;
tailp = x-2;
LSB = x;
MSB = 0;

cpu:                       |dma:
 iowrite32(LSB, tailp)     |  completes #(x-3) desc, curp = x-3
 ...                       |  tailp updated
 => irq                    |  completes #(x-2) desc, curp = x-2
    ...                    |  completes #(x-1) desc, curp = x-1
    ...                    |  ...
    ...                    |  completes #x desc, curp = tailp = x
 <= irqreturn              |  reaches tailp == curp = x, idle
 iowrite32(MSB, tailp + 4) |  ...
                           |  tailp updated, starts fetching...
                           |  fetches #(x + 1) desc, sees cntrl = 0
                           |  post Tx error, halt
Signed-off-by: NAndy Chiu <andy.chiu@sifive.com>
Reported-by: NMax Hsu <max.hsu@sifive.com>
Reviewed-by: NGreentime Hu <greentime.hu@sifive.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently it is not safe to config the IP as 64-bit addressable on 32-bit
archectures, which cannot perform a double-word store on its descriptor
pointers. The pointer is 64-bit wide if the IP is configured as 64-bit,
and the device would process the partially updated pointer on some
states if the pointer was updated via two store-words. To prevent such
condition, we force a probe fail if we discover that the IP has 64-bit
capability but it is not running on a 64-Bit kernel.

This is a series of patch (1/2). The next patch must be applied in order
to make 64b DMA safe on 64b archectures.
Signed-off-by: NAndy Chiu <andy.chiu@sifive.com>
Reported-by: NMax Hsu <max.hsu@sifive.com>
Reviewed-by: NGreentime Hu <greentime.hu@sifive.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Guangbin Huang says:

====================
net: hns3: add some fixes for -net

This series adds some fixes for the HNS3 ethernet driver.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently in driver initialization process, driver will set shapping
parameters of tm port to default speed read from firmware. However, the
speed of SFP module may not be default speed, so shapping parameters of
tm port may be incorrect.

To fix this problem, driver sets new shapping parameters for tm port
after getting exact speed of SFP module in this case.

Fixes: 88d10bd6 ("net: hns3: add support for multiple media type")
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently hns3 driver misuses the VF rss size to initialize the PF rss size
in hclge_tm_vport_tc_info_update. So this patch fix it by checking the
vport id before initialization.

Fixes: 7347255e ("net: hns3: refactor PF rss get APIs with new common rss get APIs")
Signed-off-by: NJie Wang <wangjie125@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, settings parameters of schedule mode, dwrr, shaper of tm
priority or qset of one tc are only be set when tc is enabled, they are
not restored to the default settings when tc is disabled. It confuses
users when they cat tm_priority or tm_qset files of debugfs. So this
patch fixes it.

Fixes: 84844054 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver")
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently tx push is also a ring param. So the original ring param print
info in hns3_is_ringparam_changed should be adjusted.

Fixes: 07fdc163 ("net: hns3: refactor hns3_set_ringparam()")
Signed-off-by: NJie Wang <wangjie125@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It's unnecessary to push link state to unalive VF, and the VF will
query link state from PF when it being start works.

Fixes: 18b6e31f ("net: hns3: PF add support for pushing link status to VFs")
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When modify port base vlan, the port base vlan tbl_sta needs to set to
false before removing old vlan, to indicate this operation is not finish.

Fixes: c0f46de3 ("net: hns3: fix port base vlan add fail when concurrent with reset")
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Xin Long says:

====================
Documentation: add description for a couple of sctp sysctl options

These are a couple of sysctl options I recently added, but missed adding
documents for them. Especially for net.sctp.intl_enable, it's hard for
users to setup stream interleaving, as it also needs to call some socket
options.

This patchset is to add documents for them.
====================

Link: https://lore.kernel.org/r/cover.1654787716.git.lucien.xin@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Describe it in networking/ip-sysctl.rst like other SCTP options.

Fixes: 2f5268a9 ("sctp: allow users to set netns ecn flag with sysctl")
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Describe it in networking/ip-sysctl.rst like other SCTP options.
We need to document this especially as when using the feature
of User Message Interleaving, some socket options also needs
to be set.

Fixes: 463118c3 ("sctp: support sysctl to allow users to use stream interleave")
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Describe it in networking/ip-sysctl.rst like other SCTP options.

Fixes: c0d8bab6 ("sctp: add get and set sockopt for reconf_enable")
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-06-09

Grzegorz prevents addition of TC flower filters to TC0 and fixes queue
iteration for VF ADQ to number of actual queues for i40e.

Aleksandr prevents running of ethtool tests when device is being reset
for i40e.

Michal resolves an issue where iavf does not report its MAC address
properly.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  iavf: Fix issue with MAC address of VF shown as zero
  i40e: Fix call trace in setup_tx_descriptors
  i40e: Fix calculating the number of queue pairs
  i40e: Fix adding ADQ filter to TC0
====================

Link: https://lore.kernel.org/r/20220609162620.2619258-1-anthony.l.nguyen@intel.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Pull more devicetree fixes from Rob Herring:

 - More DT meta-schema check fixes from new bindings in merge window

 - Fix stale DT binding references from Mauro

 - Update various binding maintainers

 - Fix in arm,malidp properties to match reality

 - Add deprecated 'atheros' vendor prefix

* tag 'devicetree-fixes-for-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: display: arm,malidp: remove bogus RQOS property
  dt-bindings: pinctrl: ralink: Fix 'enum' lists with duplicate entries
  dt-bindings: Drop more redundant 'maxItems/minItems' in if/then schemas
  dt-bindings: nvme: apple,nvme-ans: Drop 'maxItems' from 'apple,sart'
  MAINTAINERS: rectify entries for ARM DRM DRIVERS after dt conversion
  MAINTAINERS: update snps,axs10x-reset.yaml reference
  MAINTAINERS: update dongwoon,dw9807-vcm.yaml reference
  MAINTAINERS: update cortina,gemini-ethernet.yaml reference
  dt-bindings: mfd: rk808: update rockchip,rk808.yaml reference
  dt-bindings: reset: update st,stih407-powerdown.yaml references
  dt-bindings: arm: update vexpress-config.yaml references
  dt-bindings: interrupt-controller: update brcm,l2-intc.yaml reference
  dt-bindings: mfd: bd9571mwv: update rohm,bd9571mwv.yaml reference
  dt-bindings: update Luca Ceresoli's e-mail address
  dt-bindings: msm: update maintainers list with proper id
  dt-bindings: vendor-prefixes: document deprecated Atheros
  dt-bindings: Update QCOM USB subsystem maintainer information

Pull power management fixes from Rafael Wysocki:
 "These fix an intel_idle issue introduced during the 5.16 development
  cycle and two recent regressions in the system reboot/poweroff code.

  Specifics:

   - Fix CPUIDLE_FLAG_IRQ_ENABLE handling in intel_idle (Peter Zijlstra)

   - Allow all platforms to use the global poweroff handler and make
     non-syscall poweroff code paths work again (Dmitry Osipenko)"

* tag 'pm-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpuidle,intel_idle: Fix CPUIDLE_FLAG_IRQ_ENABLE
  kernel/reboot: Fix powering off using a non-syscall code paths
  kernel/reboot: Use static handler for register_platform_power_off()

There's a rule in certs/Makefile for which the command begins with eight
spaces.  This results in:

        ../certs/Makefile:21: FORCE prerequisite is missing
        ../certs/Makefile:21: *** missing separator.  Stop.

Fix this by turning the spaces into a tab.

Fixes: addf4663 ("certs: Check that builtin blacklist hashes are valid")
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Reviewed-by: NJarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: NMickaël Salaün <mic@linux.microsoft.com>
cc: keyrings@vger.kernel.org
Link: https://lore.kernel.org/r/486b1b80-9932-aab6-138d-434c541c934a@digikod.net/ # v1
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As Liviu pointed out, the arm,malidp-arqos-high-level property
mentioned in the original .txt binding was a mistake, and
arm,malidp-arqos-value needs to take its place.

The binding commit ce6eb025 ("dt/bindings: display: Add optional
property node define for Mali DP500") mentions the right name in the
commit message, but has the wrong name in the diff.
Commit d298e6a2 ("drm/arm/mali-dp: Add display QoS interface
configuration for Mali DP500") uses the property in the driver, but uses
the shorter name.

Remove the wrong property from the binding, and use the proper name in
the example. The actual property was already documented properly.

Fixes: 2c8b082a ("dt-bindings: display: convert Arm Mali-DP to DT schema")
Link: https://lore.kernel.org/linux-arm-kernel/YnumGEilUblhBx8E@e110455-lin.cambridge.arm.com/Signed-off-by: NAndre Przywara <andre.przywara@arm.com>
Reported-by: NLiviu Dudau <liviu.dudau@arm.com>
Reviewed-by: NLiviu Dudau <liviu.dudau@arm.com>
Signed-off-by: NRob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220609162729.1441760-1-andre.przywara@arm.com

Merge fixes for regressions introduced by the recent rework of the
system reboot/poweroff code.

* pm-sysoff:
  kernel/reboot: Fix powering off using a non-syscall code paths
  kernel/reboot: Use static handler for register_platform_power_off()

There's no reason to list the same value twice in an 'enum'. This was fixed
treewide in commit c3b00681 ("dt-bindings: Fix 'enum' lists with
duplicate entries"), but this one got added in the merge window.

A meta-schema change will catch future cases.
Signed-off-by: NRob Herring <robh@kernel.org>
Acked-by: NSergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20220606212239.1360877-1-robh@kernel.org

Pull documentation fixes from Jonathan Corbet:
 "A few documentation fixes for 5.19, including moving the new HTE docs
  to a more suitable location, adding loongarch to the features lists,
  and a couple of typo fixes"

* tag 'docs-5.19-3' of git://git.lwn.net/linux:
  docs: arm: tcm: Fix typo in description of TCM and MMU usage
  docs: Move the HTE documentation to driver-api/
  docs: usb: fix literal block marker in usbmon verification example
  Documentation/features: Update the arch support status files

Pull arm64 fixes from Catalin Marinas:

 - SME save/restore for EFI fix - incorrect logic for detecting the need
   for saving/restoring the FFR state.

 - SME fix for a CPU ID field value.

 - Sysreg generation awk script fix (comparison operator).

 - Some typos in documentation or comments and silence a sparse warning
   (missing prototype).

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Add kasan_hw_tags_enable() prototype to silence sparse
  arm64/sme: Fix EFI save/restore
  arm64/fpsimd: Fix typo in comment
  arm64/sysreg: Fix typo in Enum element regex
  arm64/sme: Fix SVE/SME typo in ABI documentation
  arm64/sme: Fix tests for 0b1111 value ID registers

Pull zonefs fixes from Damien Le Moal:

 - Fix handling of the explicit-open mount option, and in particular the
   conditions under which this option can be ignored.

 - Fix a problem with zonefs iomap_begin method, causing a hang in
   iomap_readahead() when a readahead request reaches the end of a file.

* tag 'zonefs-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: fix zonefs_iomap_begin() for reads
  zonefs: Do not ignore explicit_open with active zone limit
  zonefs: fix handling of explicit_open option on mount