- 06 5月, 2016 22 次提交
-
-
由 David Sterba 提交于
Move the op exclusivity check before the other code (same as in ADD_DEV). Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
Perform the want_write check if we get far enough to do any writes. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Anand Jain 提交于
Move scratch super outside of the chunk lock to avoid below lockdep warning. The better place to scratch super is in the function btrfs_rm_dev_replace_free_srcdev() just before free_device, which is outside of the chunk lock as well. To reproduce: (fresh boot) mkfs.btrfs -f -draid5 -mraid5 /dev/sdc /dev/sdd /dev/sde mount /dev/sdc /btrfs dd if=/dev/zero of=/btrfs/tf1 bs=4096 count=100 (get devmgt from https://github.com/asj/devmgt.git) devmgt detach /dev/sde dd if=/dev/zero of=/btrfs/tf1 bs=4096 count=100 sync btrfs replace start -Brf 3 /dev/sdf /btrfs <-- devmgt attach host7 ====================================================== [ INFO: possible circular locking dependency detected ] 4.6.0-rc2asj+ #1 Not tainted --------------------------------------------------- btrfs/2174 is trying to acquire lock: (sb_writers){.+.+.+}, at: [<ffffffff812449b4>] __sb_start_write+0xb4/0xf0 but task is already holding lock: (&fs_info->chunk_mutex){+.+.+.}, at: [<ffffffffa05c5f55>] btrfs_dev_replace_finishing+0x145/0x980 [btrfs] which lock already depends on the new lock. Chain exists of: sb_writers --> &fs_devs->device_list_mutex --> &fs_info->chunk_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->chunk_mutex); lock(&fs_devs->device_list_mutex); lock(&fs_info->chunk_mutex); lock(sb_writers); *** DEADLOCK *** -> #0 (sb_writers){.+.+.+}: [<ffffffff810e6415>] __lock_acquire+0x1bc5/0x1ee0 [<ffffffff810e707e>] lock_acquire+0xbe/0x210 [<ffffffff810df49a>] percpu_down_read+0x4a/0xa0 [<ffffffff812449b4>] __sb_start_write+0xb4/0xf0 [<ffffffff81265534>] mnt_want_write+0x24/0x50 [<ffffffff812508a2>] path_openat+0x952/0x1190 [<ffffffff81252451>] do_filp_open+0x91/0x100 [<ffffffff8123f5cc>] file_open_name+0xfc/0x140 [<ffffffff8123f643>] filp_open+0x33/0x60 [<ffffffffa0572bb6>] update_dev_time+0x16/0x40 [btrfs] [<ffffffffa057f60d>] btrfs_scratch_superblocks+0x5d/0xb0 [btrfs] [<ffffffffa057f70e>] btrfs_rm_dev_replace_remove_srcdev+0xae/0xd0 [btrfs] [<ffffffffa05c62c5>] btrfs_dev_replace_finishing+0x4b5/0x980 [btrfs] [<ffffffffa05c6ae8>] btrfs_dev_replace_start+0x358/0x530 [btrfs] Signed-off-by: NAnand Jain <anand.jain@oracle.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Ashish Samant 提交于
pagev array in scrub_block{} is of size SCRUB_MAX_PAGES_PER_BLOCK. page_index should be checked with the same to trigger BUG_ON(). Signed-off-by: NAshish Samant <ashish.samant@oracle.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Josef Bacik 提交于
btrfs_map_block can go horribly wrong in the face of fs corruption, lets agree to not be assholes and panic at any possible chance things are all fucked up. Signed-off-by: NJosef Bacik <jbacik@fb.com> [ removed type casts ] Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Liu Bo 提交于
The struct 'map_lookup' uses type int for @stripe_len, while btrfs_chunk_stripe_len() can return a u64 value, and it may end up with @stripe_len being undefined value and it can lead to 'divide error' in __btrfs_map_block(). This changes 'map_lookup' to use type u64 for stripe_len, also right now we only use BTRFS_STRIPE_LEN for stripe_len, so this adds a valid checker for BTRFS_STRIPE_LEN. Reported-by: NVegard Nossum <vegard.nossum@oracle.com> Reported-by: NQuentin Casasnovas <quentin.casasnovas@oracle.com> Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> [ folded division fix to scrub_raid56_parity ] Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
If the label setting ioctl races with sysfs label handler, we could get mixed result in the output, part old part new. We should either get the old or new label. The chances to hit this race are low. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
Add a sanity check for the fs_info as we will dereference it, similar to what the 'store features' handler does. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We don't want to trigger the change on a read-only filesystem, similar to what the label handler does. Signed-off-by: NDavid Sterba <dsterba@suse.cz>
-
由 David Sterba 提交于
The key variable occupies 17 bytes, the key_start is used once, we can simply reuse existing 'key' for that purpose. As the key is not a simple type, compiler doest not do it on itself. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
The size of root item is more than 400 bytes, which is quite a lot of stack space. As we do IO from inside the subvolume ioctls, we should keep the stack usage low in case the filesystem is on top of other layers (NFS, device mapper, iscsi, etc). Reviewed-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
We're going to use the argument multiple times later. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Anand Jain 提交于
When the replace target fails, the target device will be taken out of fs device list, scratch + update_dev_time and freed. However we could do the scratch + update_dev_time and free part after the device has been taken out of device list, so that we don't have to hold the device_list_mutex and uuid_mutex locks. Reported issue: [ 5375.718845] ====================================================== [ 5375.718846] [ INFO: possible circular locking dependency detected ] [ 5375.718849] 4.4.5-scst31x-debug-11+ #40 Not tainted [ 5375.718849] ------------------------------------------------------- [ 5375.718851] btrfs-health/4662 is trying to acquire lock: [ 5375.718861] (sb_writers){.+.+.+}, at: [<ffffffff812214f7>] __sb_start_write+0xb7/0xf0 [ 5375.718862] [ 5375.718862] but task is already holding lock: [ 5375.718907] (&fs_devs->device_list_mutex){+.+.+.}, at: [<ffffffffa028263c>] btrfs_destroy_dev_replace_tgtdev+0x3c/0x150 [btrfs] [ 5375.718907] [ 5375.718907] which lock already depends on the new lock. [ 5375.718907] [ 5375.718908] [ 5375.718908] the existing dependency chain (in reverse order) is: [ 5375.718911] [ 5375.718911] -> #3 (&fs_devs->device_list_mutex){+.+.+.}: [ 5375.718917] [<ffffffff810da4be>] lock_acquire+0xce/0x1e0 [ 5375.718921] [<ffffffff81633949>] mutex_lock_nested+0x69/0x3c0 [ 5375.718940] [<ffffffffa0219bf6>] btrfs_show_devname+0x36/0x210 [btrfs] [ 5375.718945] [<ffffffff81267079>] show_vfsmnt+0x49/0x150 [ 5375.718948] [<ffffffff81240b07>] m_show+0x17/0x20 [ 5375.718951] [<ffffffff81246868>] seq_read+0x2d8/0x3b0 [ 5375.718955] [<ffffffff8121df28>] __vfs_read+0x28/0xd0 [ 5375.718959] [<ffffffff8121e806>] vfs_read+0x86/0x130 [ 5375.718962] [<ffffffff8121f4c9>] SyS_read+0x49/0xa0 [ 5375.718966] [<ffffffff81637976>] entry_SYSCALL_64_fastpath+0x16/0x7a [ 5375.718968] [ 5375.718968] -> #2 (namespace_sem){+++++.}: [ 5375.718971] [<ffffffff810da4be>] lock_acquire+0xce/0x1e0 [ 5375.718974] [<ffffffff81635199>] down_write+0x49/0x80 [ 5375.718977] [<ffffffff81243593>] lock_mount+0x43/0x1c0 [ 5375.718979] [<ffffffff81243c13>] do_add_mount+0x23/0xd0 [ 5375.718982] [<ffffffff81244afb>] do_mount+0x27b/0xe30 [ 5375.718985] [<ffffffff812459dc>] SyS_mount+0x8c/0xd0 [ 5375.718988] [<ffffffff81637976>] entry_SYSCALL_64_fastpath+0x16/0x7a [ 5375.718991] [ 5375.718991] -> #1 (&sb->s_type->i_mutex_key#5){+.+.+.}: [ 5375.718994] [<ffffffff810da4be>] lock_acquire+0xce/0x1e0 [ 5375.718996] [<ffffffff81633949>] mutex_lock_nested+0x69/0x3c0 [ 5375.719001] [<ffffffff8122d608>] path_openat+0x468/0x1360 [ 5375.719004] [<ffffffff8122f86e>] do_filp_open+0x7e/0xe0 [ 5375.719007] [<ffffffff8121da7b>] do_sys_open+0x12b/0x210 [ 5375.719010] [<ffffffff8121db7e>] SyS_open+0x1e/0x20 [ 5375.719013] [<ffffffff81637976>] entry_SYSCALL_64_fastpath+0x16/0x7a [ 5375.719015] [ 5375.719015] -> #0 (sb_writers){.+.+.+}: [ 5375.719018] [<ffffffff810d97ca>] __lock_acquire+0x17ba/0x1ae0 [ 5375.719021] [<ffffffff810da4be>] lock_acquire+0xce/0x1e0 [ 5375.719026] [<ffffffff810d3bef>] percpu_down_read+0x4f/0xa0 [ 5375.719028] [<ffffffff812214f7>] __sb_start_write+0xb7/0xf0 [ 5375.719031] [<ffffffff81242eb4>] mnt_want_write+0x24/0x50 [ 5375.719035] [<ffffffff8122ded2>] path_openat+0xd32/0x1360 [ 5375.719037] [<ffffffff8122f86e>] do_filp_open+0x7e/0xe0 [ 5375.719040] [<ffffffff8121d8a4>] file_open_name+0xe4/0x130 [ 5375.719043] [<ffffffff8121d923>] filp_open+0x33/0x60 [ 5375.719073] [<ffffffffa02776a6>] update_dev_time+0x16/0x40 [btrfs] [ 5375.719099] [<ffffffffa02825be>] btrfs_scratch_superblocks+0x4e/0x90 [btrfs] [ 5375.719123] [<ffffffffa0282665>] btrfs_destroy_dev_replace_tgtdev+0x65/0x150 [btrfs] [ 5375.719150] [<ffffffffa02c6c80>] btrfs_dev_replace_finishing+0x6b0/0x990 [btrfs] [ 5375.719175] [<ffffffffa02c729e>] btrfs_dev_replace_start+0x33e/0x540 [btrfs] [ 5375.719199] [<ffffffffa02c7f58>] btrfs_auto_replace_start+0xf8/0x140 [btrfs] [ 5375.719222] [<ffffffffa02464e6>] health_kthread+0x246/0x490 [btrfs] [ 5375.719225] [<ffffffff810a70df>] kthread+0xef/0x110 [ 5375.719229] [<ffffffff81637d2f>] ret_from_fork+0x3f/0x70 [ 5375.719230] [ 5375.719230] other info that might help us debug this: [ 5375.719230] [ 5375.719233] Chain exists of: [ 5375.719233] sb_writers --> namespace_sem --> &fs_devs->device_list_mutex [ 5375.719233] [ 5375.719234] Possible unsafe locking scenario: [ 5375.719234] [ 5375.719234] CPU0 CPU1 [ 5375.719235] ---- ---- [ 5375.719236] lock(&fs_devs->device_list_mutex); [ 5375.719238] lock(namespace_sem); [ 5375.719239] lock(&fs_devs->device_list_mutex); [ 5375.719241] lock(sb_writers); [ 5375.719241] [ 5375.719241] *** DEADLOCK *** [ 5375.719241] [ 5375.719243] 4 locks held by btrfs-health/4662: [ 5375.719266] #0: (&fs_info->health_mutex){+.+.+.}, at: [<ffffffffa0246303>] health_kthread+0x63/0x490 [btrfs] [ 5375.719293] #1: (&fs_info->dev_replace.lock_finishing_cancel_unmount){+.+.+.}, at: [<ffffffffa02c6611>] btrfs_dev_replace_finishing+0x41/0x990 [btrfs] [ 5375.719319] #2: (uuid_mutex){+.+.+.}, at: [<ffffffffa0282620>] btrfs_destroy_dev_replace_tgtdev+0x20/0x150 [btrfs] [ 5375.719343] #3: (&fs_devs->device_list_mutex){+.+.+.}, at: [<ffffffffa028263c>] btrfs_destroy_dev_replace_tgtdev+0x3c/0x150 [btrfs] [ 5375.719343] [ 5375.719343] stack backtrace: [ 5375.719347] CPU: 2 PID: 4662 Comm: btrfs-health Not tainted 4.4.5-scst31x-debug-11+ #40 [ 5375.719348] Hardware name: Supermicro SYS-6018R-WTRT/X10DRW-iT, BIOS 1.0c 01/07/2015 [ 5375.719352] 0000000000000000 ffff880856f73880 ffffffff813529e3 ffffffff826182a0 [ 5375.719354] ffffffff8260c090 ffff880856f738c0 ffffffff810d667c ffff880856f73930 [ 5375.719357] ffff880861f32b40 ffff880861f32b68 0000000000000003 0000000000000004 [ 5375.719357] Call Trace: [ 5375.719363] [<ffffffff813529e3>] dump_stack+0x85/0xc2 [ 5375.719366] [<ffffffff810d667c>] print_circular_bug+0x1ec/0x260 [ 5375.719369] [<ffffffff810d97ca>] __lock_acquire+0x17ba/0x1ae0 [ 5375.719373] [<ffffffff810f606d>] ? debug_lockdep_rcu_enabled+0x1d/0x20 [ 5375.719376] [<ffffffff810da4be>] lock_acquire+0xce/0x1e0 [ 5375.719378] [<ffffffff812214f7>] ? __sb_start_write+0xb7/0xf0 [ 5375.719383] [<ffffffff810d3bef>] percpu_down_read+0x4f/0xa0 [ 5375.719385] [<ffffffff812214f7>] ? __sb_start_write+0xb7/0xf0 [ 5375.719387] [<ffffffff812214f7>] __sb_start_write+0xb7/0xf0 [ 5375.719389] [<ffffffff81242eb4>] mnt_want_write+0x24/0x50 [ 5375.719393] [<ffffffff8122ded2>] path_openat+0xd32/0x1360 [ 5375.719415] [<ffffffffa02462a0>] ? btrfs_congested_fn+0x180/0x180 [btrfs] [ 5375.719418] [<ffffffff810f606d>] ? debug_lockdep_rcu_enabled+0x1d/0x20 [ 5375.719420] [<ffffffff8122f86e>] do_filp_open+0x7e/0xe0 [ 5375.719423] [<ffffffff810f615d>] ? rcu_read_lock_sched_held+0x6d/0x80 [ 5375.719426] [<ffffffff81201a9b>] ? kmem_cache_alloc+0x26b/0x5d0 [ 5375.719430] [<ffffffff8122e7d4>] ? getname_kernel+0x34/0x120 [ 5375.719433] [<ffffffff8121d8a4>] file_open_name+0xe4/0x130 [ 5375.719436] [<ffffffff8121d923>] filp_open+0x33/0x60 [ 5375.719462] [<ffffffffa02776a6>] update_dev_time+0x16/0x40 [btrfs] [ 5375.719485] [<ffffffffa02825be>] btrfs_scratch_superblocks+0x4e/0x90 [btrfs] [ 5375.719506] [<ffffffffa0282665>] btrfs_destroy_dev_replace_tgtdev+0x65/0x150 [btrfs] [ 5375.719530] [<ffffffffa02c6c80>] btrfs_dev_replace_finishing+0x6b0/0x990 [btrfs] [ 5375.719554] [<ffffffffa02c6b23>] ? btrfs_dev_replace_finishing+0x553/0x990 [btrfs] [ 5375.719576] [<ffffffffa02c729e>] btrfs_dev_replace_start+0x33e/0x540 [btrfs] [ 5375.719598] [<ffffffffa02c7f58>] btrfs_auto_replace_start+0xf8/0x140 [btrfs] [ 5375.719621] [<ffffffffa02464e6>] health_kthread+0x246/0x490 [btrfs] [ 5375.719641] [<ffffffffa02463d8>] ? health_kthread+0x138/0x490 [btrfs] [ 5375.719661] [<ffffffffa02462a0>] ? btrfs_congested_fn+0x180/0x180 [btrfs] [ 5375.719663] [<ffffffff810a70df>] kthread+0xef/0x110 [ 5375.719666] [<ffffffff810a6ff0>] ? kthread_create_on_node+0x200/0x200 [ 5375.719669] [<ffffffff81637d2f>] ret_from_fork+0x3f/0x70 [ 5375.719672] [<ffffffff810a6ff0>] ? kthread_create_on_node+0x200/0x200 [ 5375.719697] ------------[ cut here ]------------ Signed-off-by: NAnand Jain <anand.jain@oracle.com> Reported-by: NYauhen Kharuzhy <yauhen.kharuzhy@zavadatar.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Dan Carpenter 提交于
The "sizeof(*arg->clone_sources) * arg->clone_sources_count" expression can overflow. It causes several static checker warnings. It's all under CAP_SYS_ADMIN so it's not that serious but lets silence the warnings. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Luis de Bethencourt 提交于
Since mixed block groups accounting isn't byte-accurate and f_bree is an unsigned integer, it could overflow. Avoid this. Signed-off-by: NLuis de Bethencourt <luisbg@osg.samsung.com> Suggested-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Luis de Bethencourt 提交于
Metadata for mixed block is already accounted in total data and should not be counted as part of the free metadata space. Signed-off-by: NLuis de Bethencourt <luisbg@osg.samsung.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=114281Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Austin S. Hemmelgarn 提交于
Currently, we don't allow the user to try and rebalance to a dup profile on a multi-device filesystem. In most cases, this is a perfectly sensible restriction as raid1 uses the same amount of space and provides better protection. However, when reshaping a multi-device filesystem down to a single device filesystem, this requires the user to convert metadata and system chunks to single profile before deleting devices, and then convert again to dup, which leaves a period of time where metadata integrity is reduced. This patch removes the single-device-only restriction from converting to dup profile to remove this potential data integrity reduction. Signed-off-by: NAustin S. Hemmelgarn <ahferroin7@gmail.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 28 4月, 2016 5 次提交
-
-
由 Liu Bo 提交于
Now we force to create empty block group to keep data profile alive, however, in the below example, we eventually get an empty block group while we're trying to get more space for other types (metadata/system), - Before, block group "A": size=2G, used=1.2G block group "B": size=2G, used=512M - After "btrfs balance start -dusage=50 mount_point", block group "A": size=2G, used=(1.2+0.5)G block group "C": size=2G, used=0 Since there is no data in block group C, it won't be deleted automatically and we have to get the unused 2G until the next mount. Balance itself just moves data and doesn't remove data, so it's safe to not create such a empty block group if we already have data allocated in other block groups. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Chandan Rajendra 提交于
The delalloc reserved space is calculated in terms of number of bytes used by an integral number of blocks. This is done by rounding down the value of 'pos' to the nearest multiple of sectorsize. The file offset value held by 'pos' variable may not be aligned to sectorsize and hence when passing it as an argument to btrfs_delalloc_release_space(), we may end up releasing larger delalloc space than we originally had reserved. Signed-off-by: NChandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Liu Bo 提交于
Now that we bail out immediately if ->writepage() returns an error, we don't need an extra error to retain the error code. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Liu Bo 提交于
If sequential writer is writing in the middle of the page and it just redirties the last written page by continuing from it. In the above case this can end up with seeking back to that firstly redirtied page after writing all the pages at the end of file because btrfs updates mapping->writeback_index to 1 past the current one. For non-cow filesystems, the cost is only about extra seek, while for cow filesystems such as btrfs, it means unnecessary fragments. To avoid it, we just need to continue writeback from the last written page. This also updates btrfs to behave like what write_cache_pages() does, ie, bail out immediately if there is an error in writepage(). <Ref: https://www.spinics.net/lists/linux-btrfs/msg52628.html> Reported-by: NHolger Hoffstätte <holger.hoffstaette@googlemail.com> Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Luke Dashjr 提交于
32-bit ioctl uses these rather than the regular FS_IOC_* versions. They can be handled in btrfs using the same code. Without this, 32-bit {ch,ls}attr fail. Signed-off-by: NLuke Dashjr <luke-jr+git@utopios.org> Cc: stable@vger.kernel.org Reviewed-by: NJosef Bacik <jbacik@fb.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 25 4月, 2016 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 24 4月, 2016 11 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal由 Linus Torvalds 提交于
Pull thermal fixes from Eduardo Valentin: "Specifics in this pull request: - Fixes in mediatek and OF thermal drivers - Fixes in power_allocator governor - More fixes of unsigned to int type change in thermal_core.c. These change have been CI tested using KernelCI bot. \o/" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: fix Mediatek thermal controller build thermal: consistently use int for trip temp thermal: fix mtk_thermal build dependency thermal: minor mtk_thermal.c cleanups thermal: power_allocator: req_range multiplication should be a 64 bit type thermal: of: add __init attribute
-
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic由 Linus Torvalds 提交于
Pull asm-generic update from Arnd Bergmann: "Here is one patch to wire up the preadv/pwritev system calls in the generic system call table, which is required for all architectures that were merged in the last few years, including arm64. Usually these get merged along with the syscall implementation or one of the architecture trees, but this time that did not happen. Andre and Christoph both sent a version of this patch, I picked the one I got first" * tag 'asm-generic-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: generic syscalls: wire up preadv2 and pwritev2 syscalls
-
由 Andre Przywara 提交于
These new syscalls are implemented as generic code, so enable them for architectures like arm64 which use the generic syscall table. Signed-off-by: NAndre Przywara <andre.przywara@arm.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Ingo Molnar: "Misc fixes: two EDAC driver fixes, a Xen crash fix, a HyperV log spam fix and a documentation fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86 EDAC, sb_edac.c: Take account of channel hashing when needed x86 EDAC, sb_edac.c: Repair damage introduced when "fixing" channel address x86/mm/xen: Suppress hugetlbfs in PV guests x86/doc: Correct limits in Documentation/x86/x86_64/mm.txt x86/hyperv: Avoid reporting bogus NMI status for Gen2 instances
-
由 Linus Torvalds 提交于
Merge branches 'perf-urgent-for-linus', 'smp-urgent-for-linus' and 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf, cpu hotplug and timer fixes from Ingo Molnar: "perf: - A single tooling fix for a user-triggerable segfault. CPU hotplug: - Fix a CPU hotplug corner case regression, introduced by the recent hotplug rework timers: - Fix a boot hang in the ARM based Tango SoC clocksource driver" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf intel-pt: Fix segfault tracing transactions * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Fix rollback during error-out in __cpu_disable() * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/tango-xtal: Fix boot hang due to incorrect test
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull locking fixes from Ingo Molnar: "Misc fixes: pvqspinlocks: - an instrumentation fix futexes: - preempt-count vs pagefault_disable decouple corner case fix - futex requeue plist race window fix - futex UNLOCK_PI transaction fix for a corner case" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: asm-generic/futex: Re-enable preemption in futex_atomic_cmpxchg_inatomic() futex: Acknowledge a new waiter in counter before plist futex: Handle unlock_pi race gracefully locking/pvqspinlock: Fix division by zero in qstat_read()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq fixes from Ingo Molnar: "A core irq affinity masks related fix and a MIPS irqchip driver fix" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/mips-gic: Don't overrun pcpu_masks array genirq: Dont allow affinity mask to be updated on IPIs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull objtool fixes from Ingo Molnar: "A handful of objtool fixes: two improvements to how warnings are printed plus a false positive warning fix, and build environment fix" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix Makefile to properly see if libelf is supported objtool: Detect falling through to the next function objtool: Add workaround for GCC switch jump table bug
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB / PHY driver fixes from Greg KH: "Here are two small sets of patches, both from subsystem trees, USB gadget and PHY drivers. Full details are in the shortlog, and they have all been in linux-next for a while (before I merged them to the USB tree)" * tag 'usb-4.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: gadget: f_fs: Fix use-after-free usb: dwc3: gadget: Fix suspend/resume during device mode usb: dwc3: fix memory leak of dwc->regset usb: dwc3: core: fix PHY handling during suspend usb: dwc3: omap: fix up error path on probe() usb: gadget: composite: Clear reserved fields of SSP Dev Cap phy: rockchip-emmc: adapt binding to specifiy register offset and length phy: rockchip-emmc: should be a child device of the GRF phy: rockchip-dp: should be a child device of the GRF
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull serial fixes from Greg KH: "Here are 3 serial driver fixes for issues that have been reported. Two are reverts, fixing problems that were in the big TTY/Serial driver merge in 4.6-rc1, and the last one is a simple bugfix for a regression that showed up in 4.6-rc1 as well. All have been in linux-next with no reported issues" * tag 'tty-4.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "serial: 8250: Add hardware dependency to RT288X option" tty/serial/8250: fix RS485 half-duplex RX Revert "serial-uartlite: Constify uartlite_be/uartlite_le"
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input subsystem fixes from Dmitry Torokhov: "Just minor driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: twl4030-vibra - do not reparent to grandparent Input: twl6040-vibra - do not reparent to grandparent Input: twl6040-vibra - ignore return value of schedule_work Input: twl6040-vibra - fix NULL pointer dereference by removing workqueue Input: pmic8xxx-pwrkey - fix algorithm for converting trigger delay Input: arizona-haptic - don't assign input_dev parent Input: clarify we want BTN_TOOL_<name> on proximity Input: xpad - add Mad Catz FightStick TE 2 VID/PID Input: gtco - fix crash on detecting device without endpoints
-
- 23 4月, 2016 1 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl由 Linus Torvalds 提交于
Pull pin control fixes from Linus Walleij: "Some pin control driver fixes came in. One headed for stable and the other two are just ordinary merge window fixes. - Make the i.MX driver select REGMAP as a dependency - Fix up the Mediatek debounce time unit - Fix a real hairy ffs vs __ffs issue in the Single pinctrl driver" * tag 'pinctrl-v4.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: single: Fix pcs_parse_bits_in_pinctrl_entry to use __ffs than ffs pinctrl: mediatek: correct debounce time unit in mtk_gpio_set_debounce pinctrl: imx: Kconfig: PINCTRL_IMX select REGMAP
-