Pull core fixes from Thomas Gleixner:

 - Unbreak the BPF compilation which got broken by the unconditional
   requirement of asm-goto, which is not supported by clang.

 - Prevent probing on exception masking instructions in uprobes and
   kprobes to avoid the issues of the delayed exceptions instead of
   having an ugly workaround.

 - Prevent a double free_page() in the error path of do_kexec_load()

 - A set of objtool updates addressing various issues mostly related to
   switch tables and the noreturn detection for recursive sibling calls

 - Header sync for tools.

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Detect RIP-relative switch table references, part 2
  objtool: Detect RIP-relative switch table references
  objtool: Support GCC 8 switch tables
  objtool: Support GCC 8's cold subfunctions
  objtool: Fix "noreturn" detection for recursive sibling calls
  objtool, kprobes/x86: Sync the latest <asm/insn.h> header with tools/objtool/arch/x86/include/asm/insn.h
  x86/cpufeature: Guard asm_volatile_goto usage for BPF compilation
  uprobes/x86: Prohibit probing on MOV SS instruction
  kprobes/x86: Prohibit probing on exception masking instructions
  x86/kexec: Avoid double free_page() upon do_kexec_load() failure

Pull ARM SoC fixes from Olof Johansson:
 "A handful of fixes. I've been queuing them up a bit too long so the
  list is longer than it otherwise would have been spread out across a
  few -rcs.

  In general, it's a scattering of fixes across several platforms,
  nothing truly serious enough to point out.

  There's a slightly larger batch of them for the Davinci platforms due
  to work to bring them back to life after some time, so there's a
  handful of regressions, some of them going back very far, others more
  recent.

  There's also a few patches fixing DT on Renesas platforms since they
  changed some bindings without remaining backwards compatible,
  splitting up describing LVDS as a proper bridge instead of having it
  as part of the display unit.

  We could push for them to be backwards compatible with old device
  trees, but it's likely to regress eventually if nobody's actually
  using said compatibility"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (36 commits)
  ARM: davinci: board-dm646x-evm: set VPIF capture card name
  ARM: davinci: board-dm646x-evm: pass correct I2C adapter id for VPIF
  ARM: davinci: dm646x: fix timer interrupt generation
  ARM: keystone: fix platform_domain_notifier array overrun
  arm64: dts: exynos: Fix interrupt type for I2S1 device on Exynos5433
  ARM: dts: imx51-zii-rdu1: fix touchscreen bindings
  firmware: arm_scmi: Use after free in scmi_create_protocol_device()
  ARM: dts: cygnus: fix irq type for arm global timer
  Revert "ARM: dts: logicpd-som-lv: Fix pinmux controller references"
  tee: check shm references are consistent in offset/size
  tee: shm: fix use-after-free via temporarily dropped reference
  ARM: dts: imx7s: Pass the 'fsl,sec-era' property
  ARM: dts: tegra20: Revert "Fix ULPI regression on Tegra20"
  ARM: dts: correct missing "compatible" entry for ti81xx SoCs
  ARM: OMAP1: ams-delta: fix deferred_fiq handler
  arm64: tegra: Make BCM89610 PHY interrupt as active low
  ARM: davinci: fix GPIO lookup for I2C
  ARM: dts: logicpd-som-lv: Fix pinmux controller references
  ARM: dts: logicpd-som-lv: Fix Audio Mute
  ARM: dts: logicpd-som-lv: Fix WL127x Startup Issues
  ...

Merge tag 'tegra-for-4.17-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into fixes

arm64: tegra: Device tree fixes for v4.17

This contains a one-line update to the device tree of the Tegra186 P3310
processor module, fixing the polarity of the PHY interrupt. Originally,
this was queued to go into v4.18, but the PHY ID matching patch has now
found its way into v4.17-rc5, which means that the PHY driver will know
how to identify the PHY on this board and try to use the interrupt. This
will unfortunately cause networking to break on P3310, hence why I think
this should go into v4.17.

* tag 'tegra-for-4.17-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: tegra: Make BCM89610 PHY interrupt as active low
Signed-off-by: NOlof Johansson <olof@lixom.net>

Pull dmaengine fix from Vinod Koul:

 - qcom bam runtime_pm fix

 - email update for Vinod

* tag 'dmaengine-fix-4.17-rc6' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: qcom: bam_dma: check if the runtime pm enabled
  dmaengine: Update email address for Vinod

Commit be83bbf8 ("mmap: introduce sane default mmap limits") was
introduced to catch problems in various ad-hoc character device drivers
doing mmap and getting the size limits wrong.  In the process, it used
"known good" limits for the normal cases of mapping regular files and
block device drivers.

It turns out that the "s_maxbytes" limit was less "known good" than I
thought.  In particular, /proc doesn't set it, but exposes one regular
file to mmap: /proc/vmcore.  As a result, that file got limited to the
default MAX_INT s_maxbytes value.

This went unnoticed for a while, because apparently the only thing that
needs it is the s390 kernel zfcpdump, but there might be other tools
that use this too.

Vasily suggested just changing s_maxbytes for all of /proc, which isn't
wrong, but makes me nervous at this stage.  So instead, just make the
new mmap limit always be MAX_LFS_FILESIZE for regular files, which won't
affect anything else.  It wasn't the regular file case I was worried
about.

I'd really prefer for maxsize to have been per-inode, but that is not
how things are today.

Fixes: be83bbf8 ("mmap: introduce sane default mmap limits")
Reported-by: NVasily Gorbik <gor@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With the following commit:

  fd35c88b ("objtool: Support GCC 8 switch tables")

I added a "can't find switch jump table" warning, to stop covering up
silent failures if add_switch_table() can't find anything.

That warning found yet another bug in the objtool switch table detection
logic.  For cases 1 and 2 (as described in the comments of
find_switch_table()), the find_symbol_containing() check doesn't adjust
the offset for RIP-relative switch jumps.

Incidentally, this bug was already fixed for case 3 with:

  6f5ec299 ("objtool: Detect RIP-relative switch table references")

However, that commit missed the fix for cases 1 and 2.

The different cases are now starting to look more and more alike.  So
fix the bug by consolidating them into a single case, by checking the
original dynamic jump instruction in the case 3 loop.

This also simplifies the code and makes it more robust against future
switch table detection issues -- of which I'm sure there will be many...

Switch table detection has been the most fragile area of objtool, by
far.  I long for the day when we'll have a GCC plugin for annotating
switch tables.  Linus asked me to delay such a plugin due to the
flakiness of the plugin infrastructure in older versions of GCC, so this
rickety code is what we're stuck with for now.  At least the code is now
a little simpler than it was.
Reported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/f400541613d45689086329432f3095119ffbc328.1526674218.git.jpoimboe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Merge misc fixes from Andrew Morton:
 "10 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  hfsplus: stop workqueue when fill_super() failed
  mm: don't allow deferred pages with NEED_PER_CPU_KM
  MAINTAINERS: add Q: entry to kselftest for patchwork project
  radix tree: fix multi-order iteration race
  radix tree test suite: multi-order iteration race
  radix tree test suite: add item_delete_rcu()
  radix tree test suite: fix compilation issue
  radix tree test suite: fix mapshift build target
  include/linux/mm.h: add new inline function vmf_error()
  lib/test_bitmap.c: fix bitmap optimisation tests to report errors correctly

Pull x86 platform driver fix from Darren Hart:
 "Remove the last of the "select DELL_SMBIOS" references in the Kconfig"

* tag 'platform-drivers-x86-v4.17-3' of git://git.infradead.org/linux-platform-drivers-x86:
  platform/x86: DELL_WMI use depends on instead of select for DELL_SMBIOS

Pull clk fixes from Stephen Boyd:

 - a modified revert of a patch that made new choices come out for a
   couple stm32 clk drivers that really always need to be there when
   that particular machine is compiled in

 - boot fix on i.MX for Stefan who noticed odd behavior from the
   critical flag patch that came in during the merge window

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: stm32: fix: stm32 clock drivers are not compiled by default
  clk: imx6ull: use OSC clock during AXI rate change

Pull i2c fixes from Wolfram Sang:
 "A bunch of driver bugfixes and a MAINTAINERS addition"

* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  MAINTAINERS: add entry for STM32 I2C driver
  i2c: viperboard: return message count on master_xfer success
  i2c: pmcmsp: fix error return from master_xfer
  i2c: pmcmsp: return message count on master_xfer success
  i2c: designware: fix poll-after-enable regression
  eeprom: at24: fix retrieving the at24_chip_data structure
  i2c: core: ACPI: Log device not acking errors at dbg loglevel
  i2c: core: ACPI: Improve OpRegion read errors

syzbot is reporting ODEBUG messages at hfsplus_fill_super() [1].  This
is because hfsplus_fill_super() forgot to call cancel_delayed_work_sync().

As far as I can see, it is hfsplus_mark_mdb_dirty() from
hfsplus_new_inode() in hfsplus_fill_super() that calls
queue_delayed_work().  Therefore, I assume that hfsplus_new_inode() does
not fail if queue_delayed_work() was called, and the out_put_hidden_dir
label is the appropriate location to call cancel_delayed_work_sync().

[1] https://syzkaller.appspot.com/bug?id=a66f45e96fdbeb76b796bf46eb25ea878c42a6c9

Link: http://lkml.kernel.org/r/964a8b27-cd69-357c-fe78-76b066056201@I-love.SAKURA.ne.jpSigned-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: Nsyzbot <syzbot+4f2e5f086147d543ab03@syzkaller.appspotmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: Ernesto A. Fernandez <ernesto.mnd.fernandez@gmail.com>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It is unsafe to do virtual to physical translations before mm_init() is
called if struct page is needed in order to determine the memory section
number (see SECTION_IN_PAGE_FLAGS).  This is because only in mm_init()
we initialize struct pages for all the allocated memory when deferred
struct pages are used.

My recent fix in commit c9e97a19 ("mm: initialize pages on demand
during boot") exposed this problem, because it greatly reduced number of
pages that are initialized before mm_init(), but the problem existed
even before my fix, as Fengguang Wu found.

Below is a more detailed explanation of the problem.

We initialize struct pages in four places:

1. Early in boot a small set of struct pages is initialized to fill the
   first section, and lower zones.

2. During mm_init() we initialize "struct pages" for all the memory that
   is allocated, i.e reserved in memblock.

3. Using on-demand logic when pages are allocated after mm_init call
   (when memblock is finished)

4. After smp_init() when the rest free deferred pages are initialized.

The problem occurs if we try to do va to phys translation of a memory
between steps 1 and 2.  Because we have not yet initialized struct pages
for all the reserved pages, it is inherently unsafe to do va to phys if
the translation itself requires access of "struct page" as in case of
this combination: CONFIG_SPARSE && !CONFIG_SPARSE_VMEMMAP

The following path exposes the problem:

  start_kernel()
   trap_init()
    setup_cpu_entry_areas()
     setup_cpu_entry_area(cpu)
      get_cpu_gdt_paddr(cpu)
       per_cpu_ptr_to_phys(addr)
        pcpu_addr_to_page(addr)
         virt_to_page(addr)
          pfn_to_page(__pa(addr) >> PAGE_SHIFT)

We disable this path by not allowing NEED_PER_CPU_KM with deferred
struct pages feature.

The problems are discussed in these threads:
  http://lkml.kernel.org/r/20180418135300.inazvpxjxowogyge@wfg-t540p.sh.intel.com
  http://lkml.kernel.org/r/20180419013128.iurzouiqxvcnpbvz@wfg-t540p.sh.intel.com
  http://lkml.kernel.org/r/20180426202619.2768-1-pasha.tatashin@oracle.com

Link: http://lkml.kernel.org/r/20180515175124.1770-1-pasha.tatashin@oracle.com
Fixes: 3a80a7fa ("mm: meminit: initialise a subset of struct pages if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set")
Signed-off-by: NPavel Tatashin <pasha.tatashin@oracle.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Dennis Zhou <dennisszhou@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A new patchwork project is created to track kselftest patches.  Update
the kselftest entry in the MAINTAINERS file adding 'Q:' entry:

  https://patchwork.kernel.org/project/linux-kselftest/list/

Link: http://lkml.kernel.org/r/20180515164427.12201-1-shuah@kernel.orgSigned-off-by: NShuah Khan (Samsung OSG) <shuah@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix a race in the multi-order iteration code which causes the kernel to
hit a GP fault.  This was first seen with a production v4.15 based
kernel (4.15.6-300.fc27.x86_64) utilizing a DAX workload which used
order 9 PMD DAX entries.

The race has to do with how we tear down multi-order sibling entries
when we are removing an item from the tree.  Remember for example that
an order 2 entry looks like this:

  struct radix_tree_node.slots[] = [entry][sibling][sibling][sibling]

where 'entry' is in some slot in the struct radix_tree_node, and the
three slots following 'entry' contain sibling pointers which point back
to 'entry.'

When we delete 'entry' from the tree, we call :

  radix_tree_delete()
    radix_tree_delete_item()
      __radix_tree_delete()
        replace_slot()

replace_slot() first removes the siblings in order from the first to the
last, then at then replaces 'entry' with NULL.  This means that for a
brief period of time we end up with one or more of the siblings removed,
so:

  struct radix_tree_node.slots[] = [entry][NULL][sibling][sibling]

This causes an issue if you have a reader iterating over the slots in
the tree via radix_tree_for_each_slot() while only under
rcu_read_lock()/rcu_read_unlock() protection.  This is a common case in
mm/filemap.c.

The issue is that when __radix_tree_next_slot() => skip_siblings() tries
to skip over the sibling entries in the slots, it currently does so with
an exact match on the slot directly preceding our current slot.
Normally this works:

                                      V preceding slot
  struct radix_tree_node.slots[] = [entry][sibling][sibling][sibling]
                                              ^ current slot

This lets you find the first sibling, and you skip them all in order.

But in the case where one of the siblings is NULL, that slot is skipped
and then our sibling detection is interrupted:

                                             V preceding slot
  struct radix_tree_node.slots[] = [entry][NULL][sibling][sibling]
                                                    ^ current slot

This means that the sibling pointers aren't recognized since they point
all the way back to 'entry', so we think that they are normal internal
radix tree pointers.  This causes us to think we need to walk down to a
struct radix_tree_node starting at the address of 'entry'.

In a real running kernel this will crash the thread with a GP fault when
you try and dereference the slots in your broken node starting at
'entry'.

We fix this race by fixing the way that skip_siblings() detects sibling
nodes.  Instead of testing against the preceding slot we instead look
for siblings via is_sibling_entry() which compares against the position
of the struct radix_tree_node.slots[] array.  This ensures that sibling
entries are properly identified, even if they are no longer contiguous
with the 'entry' they point to.

Link: http://lkml.kernel.org/r/20180503192430.7582-6-ross.zwisler@linux.intel.com
Fixes: 148deab2 ("radix-tree: improve multiorder iterators")
Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Reported-by: NCR, Sapthagirish <sapthagirish.cr@intel.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a test which shows a race in the multi-order iteration code.  This
test reliably hits the race in under a second on my machine, and is the
result of a real bug report against kernel a production v4.15 based
kernel (4.15.6-300.fc27.x86_64).  With a real kernel this issue is hit
when using order 9 PMD DAX radix tree entries.

The race has to do with how we tear down multi-order sibling entries
when we are removing an item from the tree.  Remember that an order 2
entry looks like this:

  struct radix_tree_node.slots[] = [entry][sibling][sibling][sibling]

where 'entry' is in some slot in the struct radix_tree_node, and the
three slots following 'entry' contain sibling pointers which point back
to 'entry.'

When we delete 'entry' from the tree, we call :

  radix_tree_delete()
    radix_tree_delete_item()
      __radix_tree_delete()
        replace_slot()

replace_slot() first removes the siblings in order from the first to the
last, then at then replaces 'entry' with NULL.  This means that for a
brief period of time we end up with one or more of the siblings removed,
so:

  struct radix_tree_node.slots[] = [entry][NULL][sibling][sibling]

This causes an issue if you have a reader iterating over the slots in
the tree via radix_tree_for_each_slot() while only under
rcu_read_lock()/rcu_read_unlock() protection.  This is a common case in
mm/filemap.c.

The issue is that when __radix_tree_next_slot() => skip_siblings() tries
to skip over the sibling entries in the slots, it currently does so with
an exact match on the slot directly preceding our current slot.
Normally this works:

                                      V preceding slot
  struct radix_tree_node.slots[] = [entry][sibling][sibling][sibling]
                                              ^ current slot

This lets you find the first sibling, and you skip them all in order.

But in the case where one of the siblings is NULL, that slot is skipped
and then our sibling detection is interrupted:

                                             V preceding slot
  struct radix_tree_node.slots[] = [entry][NULL][sibling][sibling]
                                                    ^ current slot

This means that the sibling pointers aren't recognized since they point
all the way back to 'entry', so we think that they are normal internal
radix tree pointers.  This causes us to think we need to walk down to a
struct radix_tree_node starting at the address of 'entry'.

In a real running kernel this will crash the thread with a GP fault when
you try and dereference the slots in your broken node starting at
'entry'.

In the radix tree test suite this will be caught by the address
sanitizer:

  ==27063==ERROR: AddressSanitizer: heap-buffer-overflow on address
  0x60c0008ae400 at pc 0x00000040ce4f bp 0x7fa89b8fcad0 sp 0x7fa89b8fcac0
  READ of size 8 at 0x60c0008ae400 thread T3
      #0 0x40ce4e in __radix_tree_next_slot /home/rzwisler/project/linux/tools/testing/radix-tree/radix-tree.c:1660
      #1 0x4022cc in radix_tree_next_slot linux/../../../../include/linux/radix-tree.h:567
      #2 0x4022cc in iterator_func /home/rzwisler/project/linux/tools/testing/radix-tree/multiorder.c:655
      #3 0x7fa8a088d50a in start_thread (/lib64/libpthread.so.0+0x750a)
      #4 0x7fa8a03bd16e in clone (/lib64/libc.so.6+0xf516e)

Link: http://lkml.kernel.org/r/20180503192430.7582-5-ross.zwisler@linux.intel.comSigned-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: CR, Sapthagirish <sapthagirish.cr@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently the lifetime of "struct item" entries in the radix tree are
not controlled by RCU, but are instead deleted inline as they are
removed from the tree.

In the following patches we add a test which has threads iterating over
items pulled from the tree and verifying them in an
rcu_read_lock()/rcu_read_unlock() section.  This means that though an
item has been removed from the tree it could still be being worked on by
other threads until the RCU grace period expires.  So, we need to
actually free the "struct item" structures at the end of the grace
period, just as we do with "struct radix_tree_node" items.

Link: http://lkml.kernel.org/r/20180503192430.7582-4-ross.zwisler@linux.intel.comSigned-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: CR, Sapthagirish <sapthagirish.cr@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pulled from a patch from Matthew Wilcox entitled "xarray: Add definition
of struct xarray":

> From: Matthew Wilcox <mawilcox@microsoft.com>
> Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>

  https://patchwork.kernel.org/patch/10341249/

These defines fix this compilation error:

  In file included from ./linux/radix-tree.h:6:0,
                   from ./linux/../../../../include/linux/idr.h:15,
                   from ./linux/idr.h:1,
                   from idr.c:4:
  ./linux/../../../../include/linux/idr.h: In function `idr_init_base':
  ./linux/../../../../include/linux/radix-tree.h:129:2: warning: implicit declaration of function `spin_lock_init'; did you mean `spinlock_t'? [-Wimplicit-function-declaration]
    spin_lock_init(&(root)->xa_lock);    \
    ^
  ./linux/../../../../include/linux/idr.h:126:2: note: in expansion of macro `INIT_RADIX_TREE'
    INIT_RADIX_TREE(&idr->idr_rt, IDR_RT_MARKER);
    ^~~~~~~~~~~~~~~

by providing a spin_lock_init() wrapper for the v4.17-rc* version of the
radix tree test suite.

Link: http://lkml.kernel.org/r/20180503192430.7582-3-ross.zwisler@linux.intel.comSigned-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: CR, Sapthagirish <sapthagirish.cr@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit c6ce3e2f ("radix tree test suite: Add config option for map
shift") introduced a phony makefile target called 'mapshift' that ends
up generating the file generated/map-shift.h.  This phony target was
then added as a dependency of the top level 'targets' build target,
which is what is run when you go to tools/testing/radix-tree and just
type 'make'.

Unfortunately, this phony target doesn't actually work as a dependency,
so you end up getting:

  $ make
  make: *** No rule to make target 'generated/map-shift.h', needed by 'main.o'.  Stop.
  make: *** Waiting for unfinished jobs....

Fix this by making the file generated/map-shift.h our real makefile
target, and add this a dependency of the top level build target.

Link: http://lkml.kernel.org/r/20180503192430.7582-2-ross.zwisler@linux.intel.comSigned-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: CR, Sapthagirish <sapthagirish.cr@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Many places in drivers/ file systems, error was handled in a common way
like below:

	ret = (ret == -ENOMEM) ? VM_FAULT_OOM : VM_FAULT_SIGBUS;

vmf_error() will replace this and return vm_fault_t type err.

A lot of drivers and filesystems currently have a rather complex mapping
of errno-to-VM_FAULT code.  We have been able to eliminate a lot of it
by just returning VM_FAULT codes directly from functions which are
called exclusively from the fault handling path.

Some functions can be called both from the fault handler and other
context which are expecting an errno, so they have to continue to return
an errno.  Some users still need to choose different behaviour for
different errnos, but vmf_error() captures the essential error
translation that's common to all users, and those that need to handle
additional errors can handle them first.

Link: http://lkml.kernel.org/r/20180510174826.GA14268@jordon-HP-15-Notebook-PCSigned-off-by: NSouptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: NMatthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I had neglected to increment the error counter when the tests failed,
which made the tests noisy when they fail, but not actually return an
error code.

Link: http://lkml.kernel.org/r/20180509114328.9887-1-mpe@ellerman.id.au
Fixes: 3cc78125 ("lib/test_bitmap.c: add optimisation tests")
Signed-off-by: NMatthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Reported-by: NMichael Ellerman <mpe@ellerman.id.au>
Tested-by: NMichael Ellerman <mpe@ellerman.id.au>
Reviewed-by: NKees Cook <keescook@chromium.org>
Cc: Yury Norov <ynorov@caviumnetworks.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: <stable@vger.kernel.org>	[4.13+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If DELL_WMI "select"s DELL_SMBIOS, the DELL_SMBIOS dependencies are
ignored and it is still possible to end up with unmet direct
dependencies.

Change the select to a depends on.
Tested-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NDarren Hart (VMware) <dvhart@infradead.org>

Pull powerpc fixes from Michael Ellerman:
 "Just three commits.

  The two cxl ones are not fixes per se, but they modify code that was
  added this cycle so that it will work with a recent firmware change.

  And then a fix for a recent commit that added sleeps in the NVRAM
  code, which needs to be more careful and not sleep if eg. we're called
  in the panic() path.

  Thanks to Nicholas Piggin, Philippe Bergheaud, Christophe Lombard"

* tag 'powerpc-4.17-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/powernv: Fix NVRAM sleep in invalid context when crashing
  cxl: Report the tunneled operations status
  cxl: Set the PBCQ Tunnel BAR register when enabling capi mode

Pull ACPI fix from Rafael Wysocki:
 "Fix an ACPICA regression introduced in this cycle and related to the
  handling of package objects loaded by the Load and loadTable AML
  operators that are not initialized properly after recent changes (Bob
  Moore)"

* tag 'acpi-4.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPICA: Add deferred package support for the Load and loadTable operators

Pull power management fix from Rafael Wysocki:
 "Fix Kconfig dependencies of the armada-37xx cpufreq driver (Miquel
  Raynal)"

* tag 'pm-4.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: armada-37xx: driver relies on cpufreq-dt

Pull USB fixes from Greg KH:
 "Here are some USB driver fixes fro 4.17-rc6.

  They resolve some reported bugs in the musb driver, the xhci driver,
  and a number of small fixes for the usbip driver.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usbip: usbip_host: fix bad unlock balance during stub_probe()
  usbip: usbip_host: fix NULL-ptr deref and use-after-free errors
  usbip: usbip_host: run rebind from exit when module is removed
  usbip: usbip_host: delete device from busid_table after rebind
  usbip: usbip_host: refine probe and disconnect debug msgs to be useful
  usb: musb: fix remote wakeup racing with suspend
  xhci: Fix USB3 NULL pointer dereference at logical disconnect.

Pull block fix from Jens Axboe:
 "Single fix this time, from Coly, fixing a failure case when
  CONFIG_DEBUGFS isn't enabled"

* tag 'for-linus-20180518' of git://git.kernel.dk/linux-block:
  bcache: return 0 from bch_debug_init() if CONFIG_DEBUG_FS=n

Pull spi fixes from Mark Brown:
 "A small collection of fixes accumilated since the merge window, all
  fairly small and driver specific"

* tag 'spi-fix-v4.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: bcm2835aux: ensure interrupts are enabled for shared handler
  spi: bcm-qspi: Always read and set BSPI_MAST_N_BOOT_CTRL
  spi: bcm-qspi: Avoid setting MSPI_CDRAM_PCS for spi-nor master
  spi: pxa2xx: Allow 64-bit DMA
  spi: cadence: Add usleep_range() for cdns_spi_fill_tx_fifo()
  spi: sh-msiof: Fix bit field overflow writes to TSCR/RSCR
  spi: imx: Update MODULE_DESCRIPTION to "SPI Controller driver"

Pull mtd fixes from Boris Brezillon:
 "NAND fixes:
   - Fix read path of the Marvell NAND driver
   - Make sure we don't pass a u64 to ndelay()

  CFI fix:
   - Fix the map_word_andequal() implementation"

* tag 'mtd/fixes-for-4.17-rc6' of git://git.infradead.org/linux-mtd:
  mtd: rawnand: Fix return type of __DIVIDE() when called with 32-bit
  mtd: rawnand: marvell: Fix read logic for layouts with ->nchunks > 2
  mtd: Fix comparison in map_word_andequal()

Pull drm fixes from Dave Airlie:
 "Pretty quiet week again: one vmwgfx regression fix, one core buffer
  overflow fix, one vc4 leak fix and three i915 fixes"

* tag 'drm-fixes-for-v4.17-rc6' of git://people.freedesktop.org/~airlied/linux:
  drm/dumb-buffers: Integer overflow in drm_mode_create_ioctl()
  drm/i915/gen9: Add WaClearHIZ_WM_CHICKEN3 for bxt and glk
  drm/vmwgfx: Set dmabuf_size when vmw_dmabuf_init is successful
  drm/vc4: Fix leak of the file_priv that stored the perfmon.
  drm/i915/execlists: Use rmb() to order CSB reads
  drm/i915/userptr: reject zero user_size
  drm: Match sysfs name in link removal to link creation

Merge tag 'drm-intel-fixes-2018-05-17' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Userptr IOCTL zero size check (Matt)
- Two hardware quirk fixes (Michel & Chris)

* tag 'drm-intel-fixes-2018-05-17' of git://anongit.freedesktop.org/drm/drm-intel:
  drm/i915/gen9: Add WaClearHIZ_WM_CHICKEN3 for bxt and glk
  drm/i915/execlists: Use rmb() to order CSB reads
  drm/i915/userptr: reject zero user_size

Merge tag 'hwmon-for-linus-v4.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
 "Two k10temp fixes:

   - fix race condition when accessing System Management Network
     registers

   - fix reading critical temperatures on F15h M60h and M70h

  Also add PCI ID's for the AMD Raven Ridge root bridge"

* tag 'hwmon-for-linus-v4.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (k10temp) Use API function to access System Management Network
  x86/amd_nb: Add support for Raven Ridge CPUs
  hwmon: (k10temp) Fix reading critical temperature register

Pull kvm fixes from Paolo Bonzini:

 - ARM/ARM64 locking fixes

 - x86 fixes: PCID, UMIP, locking

 - improved support for recent Windows version that have a 2048 Hz APIC
   timer

 - rename KVM_HINTS_DEDICATED CPUID bit to KVM_HINTS_REALTIME

 - better behaved selftests

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: rename KVM_HINTS_DEDICATED to KVM_HINTS_REALTIME
  KVM: arm/arm64: VGIC/ITS save/restore: protect kvm_read_guest() calls
  KVM: arm/arm64: VGIC/ITS: protect kvm_read_guest() calls with SRCU lock
  KVM: arm/arm64: VGIC/ITS: Promote irq_lock() in update_affinity
  KVM: arm/arm64: Properly protect VGIC locks from IRQs
  KVM: X86: Lower the default timer frequency limit to 200us
  KVM: vmx: update sec exec controls for UMIP iff emulating UMIP
  kvm: x86: Suppress CR3_PCID_INVD bit only when PCIDs are enabled
  KVM: selftests: exit with 0 status code when tests cannot be run
  KVM: hyperv: idr_find needs RCU protection
  x86: Delay skip of emulated hypercall instruction
  KVM: Extend MAX_IRQ_ROUTES to 4096 for all archs

Pull sound fixes from Takashi Iwai:
 "We have a core fix in the compat code for covering a potential race
  (double references), but it's a very minor change.

  The rest are all small device-specific quirks, as well as a correction
  of the new UAC3 support code"

* tag 'sound-4.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Use Class Specific EP for UAC3 devices.
  ALSA: hda/realtek - Clevo P950ER ALC1220 Fixup
  ALSA: usb: mixer: volume quirk for CM102-A+/102S+
  ALSA: hda: Add Lenovo C50 All in one to the power_save blacklist
  ALSA: control: fix a redundant-copy issue

KVM_HINTS_DEDICATED seems to be somewhat confusing:

Guest doesn't really care whether it's the only task running on a host
CPU as long as it's not preempted.

And there are more reasons for Guest to be preempted than host CPU
sharing, for example, with memory overcommit it can get preempted on a
memory access, post copy migration can cause preemption, etc.

Let's call it KVM_HINTS_REALTIME which seems to better
match what guests expect.

Also, the flag most be set on all vCPUs - current guests assume this.
Note so in the documentation.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Pull s390 fixes from Martin Schwidefsky:

 - a fix for the vfio ccw translation code

 - update an incorrect email address in the MAINTAINERS file

 - fix a division by zero oops in the cpum_sf code found by trinity

 - two fixes for the error handling of the qdio code

 - several spectre related patches to convert all left-over indirect
   branches in the kernel to expoline branches

 - update defconfigs to avoid warnings due to the netfilter Kconfig
   changes

 - avoid several compiler warnings in the kexec_file code for s390

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/qdio: don't release memory in qdio_setup_irq()
  s390/qdio: fix access to uninitialized qdio_q fields
  s390/cpum_sf: ensure sample frequency of perf event attributes is non-zero
  s390: use expoline thunks in the BPF JIT
  s390: extend expoline to BC instructions
  s390: remove indirect branch from do_softirq_own_stack
  s390: move spectre sysfs attribute code
  s390/kernel: use expoline for indirect branches
  s390/ftrace: use expoline for indirect branches
  s390/lib: use expoline for indirect branches
  s390/crc32-vx: use expoline for indirect branches
  s390: move expoline assembler macros to a header
  vfio: ccw: fix cleanup if cp_prefetch fails
  s390/kexec_file: add declaration of purgatory related globals
  s390: update defconfigs
  MAINTAINERS: update s390 zcrypt maintainers email address

Pull SELinux fixes from Paul Moore:
 "A small pull request to fix a few regressions in the SELinux/SCTP code
  with applications that call bind() with AF_UNSPEC/INADDR_ANY.

  The individual commit descriptions have more information, but the
  commits themselves should be self explanatory"

* tag 'selinux-pr-20180516' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: correctly handle sa_family cases in selinux_sctp_bind_connect()
  selinux: fix address family in bind() and connect() to match address/port
  selinux: add AF_UNSPEC and INADDR_ANY checks to selinux_socket_bind()

proc_pid_cmdline_read() and environ_read() directly access the target
process' VM to retrieve the command line and environment. If this
process remaps these areas onto a file via mmap(), the requesting
process may experience various issues such as extra delays if the
underlying device is slow to respond.

Let's simply refuse to access file-backed areas in these functions.
For this we add a new FOLL_ANON gup flag that is passed to all calls
to access_remote_vm(). The code already takes care of such failures
(including unmapped areas). Accesses via /proc/pid/mem were not
changed though.

This was assigned CVE-2018-1120.

Note for stable backports: the patch may apply to kernels prior to 4.11
but silently miss one location; it must be checked that no call to
access_remote_vm() keeps zero as the last argument.
Reported-by: NQualys Security Advisory <qsa@qualys.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NWilly Tarreau <w@1wt.eu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 539d39eb ("bcache: fix wrong return value in bch_debug_init()")
returns the return value of debugfs_create_dir() to bcache_init(). When
CONFIG_DEBUG_FS=n, bch_debug_init() always returns 1 and makes
bcache_init() failedi.

This patch makes bch_debug_init() always returns 0 if CONFIG_DEBUG_FS=n,
so bcache can continue to work for the kernels which don't have debugfs
enanbled.

Changelog:
v4: Add Acked-by from Kent Overstreet.
v3: Use IS_ENABLED(CONFIG_DEBUG_FS) to replace #ifdef DEBUG_FS.
v2: Remove a warning information
v1: Initial version.

Fixes: Commit 539d39eb ("bcache: fix wrong return value in bch_debug_init()")
Cc: stable@vger.kernel.org
Signed-off-by: NColy Li <colyli@suse.de>
Reported-by: NMassimo B. <massimo.b@gmx.net>
Reported-by: NKai Krakow <kai@kaishome.de>
Tested-by: NKai Krakow <kai@kaishome.de>
Acked-by: NKent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Similarly to opal_event_shutdown, opal_nvram_write can be called in
the crash path with irqs disabled. Special case the delay to avoid
sleeping in invalid context.

Fixes: 3b807033 ("powerpc/powernv: Fix OPAL NVRAM driver OPAL_BUSY loops")
Cc: stable@vger.kernel.org # v3.2
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Add I2C/SMBUS Driver entry for STM32 family from ST Microelectronics.
Signed-off-by: NPierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>