- 06 9月, 2012 1 次提交
-
-
由 Tony Lindgren 提交于
-
- 05 9月, 2012 1 次提交
-
-
由 Tony Lindgren 提交于
If NR_IRQS is less than MAX_IRQS, we end up writing past the irq_target_cpu array in omap_wakeupgen_init(): /* Associate all the IRQs to boot CPU like GIC init does. */ for (i = 0; i < max_irqs; i++) irq_target_cpu[i] = boot_cpu; This can happen if SPARSE_IRQ is enabled as by default NR_IRQS is set to 16. Without this patch we're overwriting other data during the boot. Looks like a similar fix was posted by Benoit Cousson earlier as "ARM: OMAP2+: wakeupgen: Fix wrong array size for irq_target_cpu" but was lost. Cc: stable@vger.kernel.org Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 02 9月, 2012 2 次提交
-
-
由 Linus Torvalds 提交于
-
由 John Stultz 提交于
Andreas Bombe reported that the added ktime_t overflow checking added to timespec_valid in commit 4e8b1452 ("time: Improve sanity checking of timekeeping inputs") was causing problems with X.org because it caused timeouts larger then KTIME_T to be invalid. Previously, these large timeouts would be clamped to KTIME_MAX and would never expire, which is valid. This patch splits the ktime_t overflow checking into a new timespec_valid_strict function, and converts the timekeeping codes internal checking to use this more strict function. Reported-and-tested-by: NAndreas Bombe <aeb@debian.org> Cc: Zhouping Liu <zliu@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Signed-off-by: NJohn Stultz <john.stultz@linaro.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 9月, 2012 3 次提交
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM bugfixes from Marcelo Tosatti. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: fix KVM_GET_MSR for PV EOI kvm: Fix nonsense handling of compat ioctl
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6由 Linus Torvalds 提交于
Pull PARISC fixes from James Bottomley: "This is a set of two bug fixes. One is the ATOMIC problem which is now causing a compile failure in certain situations. The other is mishandling of PER_LINUX32 which may also cause user visible effects. Signed-off-by: James Bottomley <JBottomley@Parallels.com>" * tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6: [PARISC] fix personality flag check in copy_thread() [PARISC] Redefine ATOMIC_INIT and ATOMIC64_INIT to drop the casts
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 fixes from Martin Schwidefsky: "A couple of s390 bug fixes for 3.5-rc4" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/32: Don't clobber personality flags on exec s390/smp: add missing smp_store_status() for !SMP s390/dasd: fix ioctl return value s390: Always use "long" for ssize_t to match size_t
-
- 31 8月, 2012 5 次提交
-
-
由 Radek Pilar 提交于
Fix inconsistency between mach-types and CONFIG_ name that prevents touchbook board from booting. Signed-off-by: NRadek Pilar <mrkva@mrkva.eu> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Aaro Koskinen 提交于
In some OMAP3 HS devices (at least Nokia N9 and N950), the public SRAM seems to conflict with secure portition of SRAM. When booting the 3.6-rc3 kernel (and also earlier) on these devices, the kernel gets tainted with tons of the following warnings: [ 6.894348] In-band Error seen by MPU at address 0 [...] [ 6.894378] WARNING: at arch/arm/mach-omap2/omap_l3_smx.c:162 Fix this by skipping the first 16K of the public SRAM. (Note that the mapping could not be changed, as it resulted in secure monitor call failure in save_secure_sram().) This will leave 12K SRAM available that should be still sufficient. The patch has been boot tested with vanilla 3.6-rc3 on N900, N950 and N9. Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi> Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Aaro Koskinen 提交于
OMAP4-specific code should be executed only if we are running on OMAP4. Otherwise it may break multi-OMAP kernels. Found by reading the code. Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi> Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Igor Grinberg 提交于
Currently, omap2_sync32k_clocksource_init() function initializes the 32K timer as the system clock source regardless of the CONFIG_OMAP_32K_TIMER setting. Fix this by providing a default implementation for !CONFIG_OMAP_32K_TIMER case. Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il> Reviewed-by: NPaul Walmsley <paul@pwsan.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Cc: stable@vger.kernel.org Signed-off-by: NTony Lindgren <tony@atomide.com>
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "A bunch of scattered fixes ati/intel/nouveau, couple of core ones, nothing too shocking or different." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: Add EDID_QUIRK_FORCE_REDUCED_BLANKING for ASUS VW222S gma500: Consider CRTC initially active. drm/radeon: fix dig encoder selection on DCE61 drm/radeon: fix double free in radeon_gpu_reset drm/radeon: force dma32 to fix regression rs4xx,rs6xx,rs740 drm/radeon: rework panel mode setup drm/radeon/atom: powergating fixes for DCE6 drm/radeon/atom: rework DIG modesetting on DCE3+ drm/radeon: don't disable plls that are in use by other crtcs drm/radeon: add proper checking of RESOLVE_BOX command for r600-r700 drm/radeon: initialize tracked CS state drm/radeon: fix reading CB_COLORn_MASK from the CS drm/nvc0/copy: check PUNITS to determine which copy engines are disabled i915: Quirk no_lvds on Gigabyte GA-D525TUD ITX motherboard drm/i915: Use the correct size of the GTT for placing the per-process entries drm: Check for invalid cursor flags drm: Initialize object type when using DRM_MODE() macro drm/i915: fix color order for BGR formats on IVB drm/i915: fix wrong order of parameters in port checking functions
-
- 30 8月, 2012 17 次提交
-
-
由 Heiko Carstens 提交于
In native 32 bit mode the personality flags were not correctly inherited. This is the s390 version of 59e4c3a2 "powerpc/32: Don't clobber personality flags on exec". Reported-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Paul Menzel 提交于
Connecting an ASUS VW222S [1] over VGA a garbled screen is shown with vertical stripes in the top half. In commit bc42aabc [2] commit bc42aabc Author: Adam Jackson <ajax@redhat.com> Date: Wed May 23 16:26:54 2012 -0400 drm/edid/quirks: ViewSonic VA2026w Adam Jackson added the quirk `EDID_QUIRK_FORCE_REDUCED_BLANKING` which is also needed for this ASUS monitor. All log files and output from `xrandr` is included in the referenced Bugzilla report #17629. Please note that this monitor only has a VGA (D-Sub) connector [1]. [1] http://www.asus.com/Display/LCD_Monitors/VW222S/ [2] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=bc42aabc6a01b92b0f961d65671564e0e1cd7592 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=17629Signed-off-by: NPaul Menzel <paulepanter@users.sourceforge.net> Cc: <dri-devel@lists.freedesktop.org> Cc: Adam Jackson <ajax@redhat.com> Cc: Ian Pilcher <arequipeno@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
Alex writes: Highlights: - fix a gart regression on older IGP chips - more MSAA fixes - fix a double free in gpu reset code - modesetting fixes - trinity dig encoder fix. * 'drm-fixes-3.6' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix dig encoder selection on DCE61 drm/radeon: fix double free in radeon_gpu_reset drm/radeon: force dma32 to fix regression rs4xx,rs6xx,rs740 drm/radeon: rework panel mode setup drm/radeon/atom: powergating fixes for DCE6 drm/radeon/atom: rework DIG modesetting on DCE3+ drm/radeon: don't disable plls that are in use by other crtcs drm/radeon: add proper checking of RESOLVE_BOX command for r600-r700 drm/radeon: initialize tracked CS state drm/radeon: fix reading CB_COLORn_MASK from the CS
-
由 Forest Bond 提交于
[this one ideally should make 3.6 - it fixes the very annoying mode setting bug] This causes the pipe to be forced off prior to initial mode set, which roughly mirrors the behavior of the i915 driver. It fixes initial mode setting on my Intel DN2800MT (Cedarview) board. Without it, mode setting triggers an out-of-range error from the monitor for most modes, but only on initial configuration (i.e. they can be configured successfully from userspace after that). Signed-off-by: NForest Bond <forest.bond@rapidrollout.com> Signed-off-by: NAlan Cox <alan@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Was using the DCE41 code which was wrong. Fixes blank displays on a number of Trinity systems. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fixes from Chris Mason: "I've split out the big send/receive update from my last pull request and now have just the fixes in my for-linus branch. The send/recv branch will wander over to linux-next shortly though. The largest patches in this pull are Josef's patches to fix DIO locking problems and his patch to fix a crash during balance. They are both well tested. The rest are smaller fixes that we've had queued. The last rc came out while I was hacking new and exciting ways to recover from a misplaced rm -rf on my dev box, so these missed rc3." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (25 commits) Btrfs: fix that repair code is spuriously executed for transid failures Btrfs: fix ordered extent leak when failing to start a transaction Btrfs: fix a dio write regression Btrfs: fix deadlock with freeze and sync V2 Btrfs: revert checksum error statistic which can cause a BUG() Btrfs: remove superblock writing after fatal error Btrfs: allow delayed refs to be merged Btrfs: fix enospc problems when deleting a subvol Btrfs: fix wrong mtime and ctime when creating snapshots Btrfs: fix race in run_clustered_refs Btrfs: don't run __tree_mod_log_free_eb on leaves Btrfs: increase the size of the free space cache Btrfs: barrier before waitqueue_active Btrfs: fix deadlock in wait_for_more_refs btrfs: fix second lock in btrfs_delete_delayed_items() Btrfs: don't allocate a seperate csums array for direct reads Btrfs: do not strdup non existent strings Btrfs: do not use missing devices when showing devname Btrfs: fix that error value is changed by mistake Btrfs: lock extents as we map them in DIO ...
-
git://www.linux-watchdog.org/linux-watchdog由 Linus Torvalds 提交于
Pull watchdog fixes from Wim Van Sebroeck: "This will fix a warning for watchdog-test.c and it will remove a duplicate include of delay.h" * git://www.linux-watchdog.org/linux-watchdog: watchdog: da9052: Remove duplicate inclusion of delay.h watchdog: fix watchdog-test.c build warning
-
由 David Rientjes 提交于
cache_grow() can reenable irqs so the cpu (and node) can change, so ensure that we take list_lock on the correct nodelist. This fixes an issue with commit 072bb0aa ("mm: sl[au]b: add knowledge of PFMEMALLOC reserve pages") where list_lock for the wrong node was taken after growing the cache. Reported-and-tested-by: NHaggai Eran <haggaie@mellanox.com> Signed-off-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christian König 提交于
radeon_ring_restore is freeing the memory for the saved ring data. We need to remember that, otherwise we try to restore the ring data again on the next try. Additional to that it shouldn't try the reset infinitely if we have saved ring data. Signed-off-by: NChristian König <deathsimple@vodafone.de> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jerome Glisse 提交于
It seems some of those IGP dislike non dma32 page despite what documentation says. Fix regression since we allowed non dma32 pages. It seems it only affect some revision of those IGP chips as we don't know which one just force dma32 for all of them. https://bugzilla.redhat.com/show_bug.cgi?id=785375Signed-off-by: NJerome Glisse <jglisse@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Adjust the panel mode setup to match the behavior of the vbios. Rather than checking for specific bridge chip ids, just check the eDP configuration register. This saves extra aux transactions and works across DP bridge chips without requiring additional per chip id checking. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Power gating is per crtc pair, but the powergating registers should be called individually. The hw handles power up/down properly. The pair is powered up if either crtc in the pair is powered up and the pair is not powered down until both crtcs in the pair are powered down. This simplifies programming and should save additional power as the previous code never actually power gated the crtc pair. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
The ordering is important and the current drm code wasn't cutting it for modern DIG encoders. We need to have information about crtc before setting up the encoders so I've shifted the ordering a bit. Probably we'll need a full rework akin to danvet's recent intel patchs. This patch fixes numerous issues with DP bridge chips and makes link training much more reliable. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
Some plls are shared for DP. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
-
由 Marek Olšák 提交于
Checking of the second colorbuffer was skipped on r700, because CB_TARGET_MASK was 0xf. With r600, CB_TARGET_MASK is changed to 0xff, so we must set the number of samples of the second colorbuffer to 1 in order to pass the CS checker. The DRM version is bumped, because RESOLVE_BOX is always rejected without this fix on r600. Signed-off-by: NMarek Olšák <maraeo@gmail.com> Reviewed-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Marek Olšák 提交于
This should help catch uninitialized registers and reject commands because of that. Signed-off-by: NMarek Olšák <maraeo@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Marek Olšák 提交于
Signed-off-by: NMarek Olšák <maraeo@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 29 8月, 2012 11 次提交
-
-
由 Sachin Kamat 提交于
delay.h header file was included twice. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Randy Dunlap 提交于
Fix compiler warning by making the function static: Documentation/watchdog/src/watchdog-test.c:34:6: warning: no previous prototype for 'term' Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
git://people.freedesktop.org/~danvet/drm-intel由 Dave Airlie 提交于
Daniel writes: "Just a few smaller things: - Fix up a pipe vs. plane confusion from a refactoring, fixes a regression from 3.1 (Anhua Xu). - Fix ivb sprite pixel formats (Vijay). - Fixup ppgtt pde placement for machines where the Bios artifically limits the availbale gtt space in the name of ... product differentiation (Chris). This fixes an oops. - Yet another no_lvds quirk entry." * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: i915: Quirk no_lvds on Gigabyte GA-D525TUD ITX motherboard drm/i915: Use the correct size of the GTT for placing the per-process entries drm/i915: fix color order for BGR formats on IVB drm/i915: fix wrong order of parameters in port checking functions
-
由 Dave Airlie 提交于
Merge branch 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes Ben says its just a single fix to avoid the wrong pcopy units being used. * 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nvc0/copy: check PUNITS to determine which copy engines are disabled
-
由 Ben Skeggs 提交于
On some Fermi chipsets (NVCE particularly) PCOPY1 doesn't exist. And if what I've seen on Kepler is true of Fermi too, chipsets of the same type can have different PCOPY units available. This should fix a v3.5 regression reported by a number of people effecting suspend/resume on NVC8/NVCE chipsets. Cc: stable@vger.kernel.org [3.5] Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Stefan Behrens 提交于
If verify_parent_transid() fails for all mirrors, the current code calls repair_io_failure() anyway which means: - that the disk block is rewritten without repairing anything and - that a kernel log message is printed which misleadingly claims that a read error was corrected. This is an example: parent transid verify failed on 615015833600 wanted 110423 found 110424 parent transid verify failed on 615015833600 wanted 110423 found 110424 btrfs read error corrected: ino 1 off 615015833600 (dev /dev/...) It is wrong to ignore the results from verify_parent_transid() and to call repair_eb_io_failure() when the verification of the transids failed. This commit fixes the issue. Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Liu Bo 提交于
We cannot just return error before freeing ordered extent and releasing reserved space when we fail to start a transacion. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Liu Bo 提交于
This bug is introduced by commit 3b8bde746f6f9bd36a9f05f5f3b6e334318176a9 (Btrfs: lock extents as we map them in DIO). In dio write, we should unlock the section which we didn't do IO on in case that we fall back to buffered write. But we need to not only unlock the section but also cleanup reserved space for the section. This bug was found while running xfstests 133, with this 133 no longer complains. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Josef Bacik 提交于
We can deadlock with freeze right now because we unconditionally start a transaction in our ->sync_fs() call. To fix this just check and see if we have a running transaction to commit. This saves us from the deadlock because at this point we'll have the umount sem for the sb so we're safe from freezes coming in after we've done our check. With this patch the freeze xfstests no longer deadlocks. Thanks, Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Stefan Behrens 提交于
Commit 442a4f63 added btrfs device statistic counters for detected IO and checksum errors to Linux 3.5. The statistic part that counts checksum errors in end_bio_extent_readpage() can cause a BUG() in a subfunction: "kernel BUG at fs/btrfs/volumes.c:3762!" That part is reverted with the current patch. However, the counting of checksum errors in the scrub context remains active, and the counting of detected IO errors (read, write or flush errors) in all contexts remains active. Cc: stable <stable@vger.kernel.org> # 3.5 Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Stefan Behrens 提交于
With commit acce952b, btrfs was changed to flag the filesystem with BTRFS_SUPER_FLAG_ERROR and switch to read-only mode after a fatal error happened like a write I/O errors of all mirrors. In such situations, on unmount, the superblock is written in btrfs_error_commit_super(). This is done with the intention to be able to evaluate the error flag on the next mount. A warning is printed in this case during the next mount and the log tree is ignored. The issue is that it is possible that the superblock points to a root that was not written (due to write I/O errors). The result is that the filesystem cannot be mounted. btrfsck also does not start and all the other btrfs-progs tools fail to start as well. However, mount -o recovery is working well and does the right things to recover the filesystem (i.e., don't use the log root, clear the free space cache and use the next mountable root that is stored in the root backup array). This patch removes the writing of the superblock when BTRFS_SUPER_FLAG_ERROR is set, and removes the handling of the error flag in the mount function. These lines can be used to reproduce the issue (using /dev/sdm): SCRATCH_DEV=/dev/sdm SCRATCH_MNT=/mnt echo 0 25165824 linear $SCRATCH_DEV 0 | dmsetup create foo ls -alLF /dev/mapper/foo mkfs.btrfs /dev/mapper/foo mount /dev/mapper/foo $SCRATCH_MNT echo bar > $SCRATCH_MNT/foo sync echo 0 25165824 error | dmsetup reload foo dmsetup resume foo ls -alF $SCRATCH_MNT touch $SCRATCH_MNT/1 ls -alF $SCRATCH_MNT sleep 35 echo 0 25165824 linear $SCRATCH_DEV 0 | dmsetup reload foo dmsetup resume foo sleep 1 umount $SCRATCH_MNT btrfsck /dev/mapper/foo dmsetup remove foo Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>
-