- 21 12月, 2016 2 次提交
-
-
由 jbrunet 提交于
The patches regarding eee-broken-modes was merged before all people involved could find an agreement on the best way to move forward. While we agreed on having a DT property to mark particular modes as broken, the value used for eee-broken-modes mapped the phy register in very direct way. Because of this, the concern is that it could be used to implement configuration policies instead of describing a broken HW. In the end, having a boolean property for each mode seems to be preferred over one bit field value mapping the register (too) directly. Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: NJerome Brunet <jbrunet@baylibre.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 jbrunet 提交于
In genphy_config_eee_advert, the return value of phy_read_mmd_indirect is checked to know if the register could be accessed but the result is assigned to a 'u32'. Changing to 'int' to correctly get errors from phy_read_mmd_indirect. Fixes: d853d145 ("net: phy: add an option to disable EEE advertisement") Reported-by: NJulia Lawall <julia.lawall@lip6.fr> Signed-off-by: NJerome Brunet <jbrunet@baylibre.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 12月, 2016 3 次提交
-
-
由 zheng li 提交于
ipv4: Should use consistent conditional judgement for ip fragment in __ip_append_data and ip_finish_output There is an inconsistent conditional judgement in __ip_append_data and ip_finish_output functions, the variable length in __ip_append_data just include the length of application's payload and udp header, don't include the length of ip header, but in ip_finish_output use (skb->len > ip_skb_dst_mtu(skb)) as judgement, and skb->len include the length of ip header. That causes some particular application's udp payload whose length is between (MTU - IP Header) and MTU were fragmented by ip_fragment even though the rst->dev support UFO feature. Add the length of ip header to length in __ip_append_data to keep consistent conditional judgement as ip_finish_output for ip fragment. Signed-off-by: NZheng Li <james.z.li@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Machek 提交于
Fix up memory barriers in stmmac driver. They are meant to protect against DMA engine, so smp_ variants are certainly wrong, and dma_ variants are preferable. Signed-off-by: NPavel Machek <pavel@denx.de> Tested-by: NNiklas Cassel <niklas.cassel@axis.com> Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arvind Yadav 提交于
Here, If devm_ioremap will fail. It will return NULL. Kernel can run into a NULL-pointer dereference. This error check will avoid NULL pointer dereference. Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 12月, 2016 35 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes and cleanups from David Miller: 1) Revert bogus nla_ok() change, from Alexey Dobriyan. 2) Various bpf validator fixes from Daniel Borkmann. 3) Add some necessary SET_NETDEV_DEV() calls to hsis_femac and hip04 drivers, from Dongpo Li. 4) Several ethtool ksettings conversions from Philippe Reynes. 5) Fix bugs in inet port management wrt. soreuseport, from Tom Herbert. 6) XDP support for virtio_net, from John Fastabend. 7) Fix NAT handling within a vrf, from David Ahern. 8) Endianness fixes in dpaa_eth driver, from Claudiu Manoil * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (63 commits) net: mv643xx_eth: fix build failure isdn: Constify some function parameters mlxsw: spectrum: Mark split ports as such cgroup: Fix CGROUP_BPF config qed: fix old-style function definition net: ipv6: check route protocol when deleting routes r6040: move spinlock in r6040_close as SOFTIRQ-unsafe lock order detected irda: w83977af_ir: cleanup an indent issue net: sfc: use new api ethtool_{get|set}_link_ksettings net: davicom: dm9000: use new api ethtool_{get|set}_link_ksettings net: cirrus: ep93xx: use new api ethtool_{get|set}_link_ksettings net: chelsio: cxgb3: use new api ethtool_{get|set}_link_ksettings net: chelsio: cxgb2: use new api ethtool_{get|set}_link_ksettings bpf: fix mark_reg_unknown_value for spilled regs on map value marking bpf: fix overflow in prog accounting bpf: dynamically allocate digest scratch buffer gtp: Fix initialization of Flags octet in GTPv1 header gtp: gtp_check_src_ms_ipv4() always return success net/x25: use designated initializers isdn: use designated initializers ... -
由 Linus Torvalds 提交于
Merge uncontroversial parts of branch 'readlink' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull partial readlink cleanups from Miklos Szeredi. This is the uncontroversial part of the readlink cleanup patch-set that simplifies the default readlink handling. Miklos and Al are still discussing the rest of the series. * git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: vfs: make generic_readlink() static vfs: remove ".readlink = generic_readlink" assignments vfs: default to generic_readlink() vfs: replace calling i_op->readlink with vfs_readlink() proc/self: use generic_readlink ecryptfs: use vfs_get_link() bad_inode: add missing i_op initializers
-
由 Sudip Mukherjee 提交于
The build of sparc allmodconfig fails with the error: "of_irq_to_resource" [drivers/net/ethernet/marvell/mv643xx_eth.ko] undefined! of_irq_to_resource() is defined when CONFIG_OF_IRQ is defined. And also CONFIG_OF_IRQ can only be defined if CONFIG_IRQ is defined. So we can safely use #if defined(CONFIG_OF_IRQ) in the code. Signed-off-by: NSudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Emese Revfy 提交于
The coming initify gcc plugin expects const pointer types, and caught some __printf arguments that weren't const yet. This fixes those. Signed-off-by: NEmese Revfy <re.emese@gmail.com> [kees: expanded commit message] Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
When a port is split we should mark it as such, as otherwise the split ports aren't renamed correctly (e.g. sw1p3 -> sw1p3s1) and the unsplit operation fails: $ devlink port split sw1p3 count 4 $ devlink port unsplit eth0 devlink answers: Invalid argument [ 598.565307] mlxsw_spectrum 0000:03:00.0 eth0: Port wasn't split Fixes: 67963a33 ("mlxsw: Make devlink port instances independent of spectrum/switchx2 port instances") Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Reported-by: NTamir Winetroub <tamirw@mellanox.com> Reviewed-by: NElad Raz <eladr@mellanox.com> Tested-by: NTamir Winetroub <tamirw@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull more vfs updates from Al Viro: "In this pile: - autofs-namespace series - dedupe stuff - more struct path constification" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (40 commits) ocfs2: implement the VFS clone_range, copy_range, and dedupe_range features ocfs2: charge quota for reflinked blocks ocfs2: fix bad pointer cast ocfs2: always unlock when completing dio writes ocfs2: don't eat io errors during _dio_end_io_write ocfs2: budget for extent tree splits when adding refcount flag ocfs2: prohibit refcounted swapfiles ocfs2: add newlines to some error messages ocfs2: convert inode refcount test to a helper simple_write_end(): don't zero in short copy into uptodate exofs: don't mess with simple_write_{begin,end} 9p: saner ->write_end() on failing copy into non-uptodate page fix gfs2_stuffed_write_end() on short copies fix ceph_write_end() nfs_write_end(): fix handling of short copies vfs: refactor clone/dedupe_file_range common functions fs: try to clone files first in vfs_copy_file_range vfs: misc struct path constification namespace.c: constify struct path passed to a bunch of primitives quota: constify struct path in quota_on ...
-
由 Andy Lutomirski 提交于
CGROUP_BPF depended on SOCK_CGROUP_DATA which can't be manually enabled, making it rather challenging to turn CGROUP_BPF on. Signed-off-by: NAndy Lutomirski <luto@kernel.org> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'mac80211-for-davem-2016-12-16' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Three fixes: * avoid a WARN_ON() when trying to use WEP with AP_VLANs * ensure enough headroom on mesh forwarding packets * don't report unknown/invalid rates to userspace ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
The newly added file causes a harmless warning, with "make W=1": drivers/net/ethernet/qlogic/qed/qed_iscsi.c: In function 'qed_get_iscsi_ops': drivers/net/ethernet/qlogic/qed/qed_iscsi.c:1268:29: warning: old-style function definition [-Wold-style-definition] This makes it a proper prototype. Fixes: fc831825 ("qed: Add support for hardware offloaded iSCSI.") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mantas M 提交于
The protocol field is checked when deleting IPv4 routes, but ignored for IPv6, which causes problems with routing daemons accidentally deleting externally set routes (observed by multiple bird6 users). This can be verified using `ip -6 route del <prefix> proto something`. Signed-off-by: NMantas Mikulėnas <grawity@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manuel Bessler 提交于
'ifconfig eth0 down' makes r6040_close() trigger: INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected Fixed by moving calls to phy_stop(), napi_disable(), netif_stop_queue() to outside of the module's private spin_lock_irq block. Found on a Versalogic Tomcat SBC with a Vortex86 SoC s1660e_5150:~# sudo ifconfig eth0 down [ 61.306415] ====================================================== [ 61.306415] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] [ 61.306415] 4.9.0-gb898d2d-manuel #1 Not tainted [ 61.306415] ------------------------------------------------------ [ 61.306415] ifconfig/449 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 61.306415] (&dev->lock){+.+...}, at: [<c1336276>] phy_stop+0x16/0x80 [ 61.306415] and this task is already holding: [ 61.306415] (&(&lp->lock)->rlock){+.-...}, at: [<d0934c84>] r6040_close+0x24/0x230 [r6040] which would create a new lock dependency: [ 61.306415] (&(&lp->lock)->rlock){+.-...} -> (&dev->lock){+.+...} [ 61.306415] but this new dependency connects a SOFTIRQ-irq-safe lock: [ 61.306415] (&(&lp->lock)->rlock){+.-...} [ 61.306415] ... which became SOFTIRQ-irq-safe at: [ 61.306415] [ 61.306415] [<c1075bc5>] __lock_acquire+0x555/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14bb334>] _raw_spin_lock_irqsave+0x24/0x40 [ 61.306415] [ 61.306415] [<d0934ac0>] r6040_start_xmit+0x30/0x1d0 [r6040] [ 61.306415] [ 61.306415] [<c13a7d4d>] dev_hard_start_xmit+0x9d/0x2d0 [ 61.306415] [ 61.306415] [<c13c8a38>] sch_direct_xmit+0xa8/0x140 [ 61.306415] [ 61.306415] [<c13a8436>] __dev_queue_xmit+0x416/0x780 [ 61.306415] [ 61.306415] [<c13a87aa>] dev_queue_xmit+0xa/0x10 [ 61.306415] [ 61.306415] [<c13b4837>] neigh_resolve_output+0x147/0x220 [ 61.306415] [ 61.306415] [<c144541b>] ip6_finish_output2+0x2fb/0x910 [ 61.306415] [ 61.306415] [<c14494e6>] ip6_finish_output+0xa6/0x1a0 [ 61.306415] [ 61.306415] [<c1449635>] ip6_output+0x55/0x320 [ 61.306415] [ 61.306415] [<c146f4d2>] mld_sendpack+0x352/0x560 [ 61.306415] [ 61.306415] [<c146fe55>] mld_ifc_timer_expire+0x155/0x280 [ 61.306415] [ 61.306415] [<c108b081>] call_timer_fn+0x81/0x270 [ 61.306415] [ 61.306415] [<c108b331>] expire_timers+0xc1/0x180 [ 61.306415] [ 61.306415] [<c108b4f7>] run_timer_softirq+0x77/0x150 [ 61.306415] [ 61.306415] [<c1043d04>] __do_softirq+0xb4/0x3d0 [ 61.306415] [ 61.306415] [<c101a15c>] do_softirq_own_stack+0x1c/0x30 [ 61.306415] [ 61.306415] [<c104416e>] irq_exit+0x8e/0xa0 [ 61.306415] [ 61.306415] [<c1019d31>] do_IRQ+0x51/0x100 [ 61.306415] [ 61.306415] [<c14bc176>] common_interrupt+0x36/0x40 [ 61.306415] [ 61.306415] [<c1134928>] set_root+0x68/0xf0 [ 61.306415] [ 61.306415] [<c1136120>] path_init+0x400/0x640 [ 61.306415] [ 61.306415] [<c11386bf>] path_lookupat+0xf/0xe0 [ 61.306415] [ 61.306415] [<c1139ebc>] filename_lookup+0x6c/0x100 [ 61.306415] [ 61.306415] [<c1139fd5>] user_path_at_empty+0x25/0x30 [ 61.306415] [ 61.306415] [<c11298c6>] SyS_faccessat+0x86/0x1e0 [ 61.306415] [ 61.306415] [<c1129a30>] SyS_access+0x10/0x20 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] [ 61.306415] to a SOFTIRQ-irq-unsafe lock: [ 61.306415] (&dev->lock){+.+...} [ 61.306415] ... which became SOFTIRQ-irq-unsafe at: [ 61.306415] ...[ 61.306415] [ 61.306415] [<c1075c0c>] __lock_acquire+0x59c/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0 [ 61.306415] [ 61.306415] [<c133747d>] phy_probe+0x4d/0xc0 [ 61.306415] [ 61.306415] [<c1338afe>] phy_attach_direct+0xbe/0x190 [ 61.306415] [ 61.306415] [<c1338ca7>] phy_connect_direct+0x17/0x60 [ 61.306415] [ 61.306415] [<c1338d23>] phy_connect+0x33/0x70 [ 61.306415] [ 61.306415] [<d09357a0>] r6040_init_one+0x3a0/0x500 [r6040] [ 61.306415] [ 61.306415] [<c12a78c7>] pci_device_probe+0x77/0xd0 [ 61.306415] [ 61.306415] [<c12f5e15>] driver_probe_device+0x145/0x280 [ 61.306415] [ 61.306415] [<c12f5fd9>] __driver_attach+0x89/0x90 [ 61.306415] [ 61.306415] [<c12f43ef>] bus_for_each_dev+0x4f/0x80 [ 61.306415] [ 61.306415] [<c12f5954>] driver_attach+0x14/0x20 [ 61.306415] [ 61.306415] [<c12f55b7>] bus_add_driver+0x197/0x210 [ 61.306415] [ 61.306415] [<c12f6a21>] driver_register+0x51/0xd0 [ 61.306415] [ 61.306415] [<c12a6955>] __pci_register_driver+0x45/0x50 [ 61.306415] [ 61.306415] [<d0938017>] 0xd0938017 [ 61.306415] [ 61.306415] [<c100043f>] do_one_initcall+0x2f/0x140 [ 61.306415] [ 61.306415] [<c10e48c0>] do_init_module+0x4a/0x19b [ 61.306415] [ 61.306415] [<c10a680e>] load_module+0x1b2e/0x2070 [ 61.306415] [ 61.306415] [<c10a6eb9>] SyS_finit_module+0x69/0x80 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] [ 61.306415] other info that might help us debug this: [ 61.306415] [ 61.306415] Possible interrupt unsafe locking scenario: [ 61.306415] [ 61.306415] CPU0 CPU1 [ 61.306415] ---- ---- [ 61.306415] lock(&dev->lock); [ 61.306415] local_irq_disable(); [ 61.306415] lock(&(&lp->lock)->rlock); [ 61.306415] lock(&dev->lock); [ 61.306415] <Interrupt> [ 61.306415] lock(&(&lp->lock)->rlock); [ 61.306415] [ 61.306415] *** DEADLOCK *** [ 61.306415] [ 61.306415] 2 locks held by ifconfig/449: [ 61.306415] #0: (rtnl_mutex){+.+.+.}, at: [<c13b68ef>] rtnl_lock+0xf/0x20 [ 61.306415] #1: (&(&lp->lock)->rlock){+.-...}, at: [<d0934c84>] r6040_close+0x24/0x230 [r6040] [ 61.306415] [ 61.306415] the dependencies between SOFTIRQ-irq-safe lock and the holding lock: [ 61.306415] -> (&(&lp->lock)->rlock){+.-...} ops: 3049 { [ 61.306415] HARDIRQ-ON-W at: [ 61.306415] [ 61.306415] [<c1075be7>] __lock_acquire+0x577/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14bb21b>] _raw_spin_lock+0x1b/0x30 [ 61.306415] [ 61.306415] [<d09343cc>] r6040_poll+0x2c/0x330 [r6040] [ 61.306415] [ 61.306415] [<c13a5577>] net_rx_action+0x197/0x340 [ 61.306415] [ 61.306415] [<c1043d04>] __do_softirq+0xb4/0x3d0 [ 61.306415] [ 61.306415] [<c1044037>] run_ksoftirqd+0x17/0x40 [ 61.306415] [ 61.306415] [<c105fe91>] smpboot_thread_fn+0x141/0x180 [ 61.306415] [ 61.306415] [<c105c84e>] kthread+0xde/0x110 [ 61.306415] [ 61.306415] [<c14bb949>] ret_from_fork+0x19/0x30 [ 61.306415] IN-SOFTIRQ-W at: [ 61.306415] [ 61.306415] [<c1075bc5>] __lock_acquire+0x555/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14bb334>] _raw_spin_lock_irqsave+0x24/0x40 [ 61.306415] [ 61.306415] [<d0934ac0>] r6040_start_xmit+0x30/0x1d0 [r6040] [ 61.306415] [ 61.306415] [<c13a7d4d>] dev_hard_start_xmit+0x9d/0x2d0 [ 61.306415] [ 61.306415] [<c13c8a38>] sch_direct_xmit+0xa8/0x140 [ 61.306415] [ 61.306415] [<c13a8436>] __dev_queue_xmit+0x416/0x780 [ 61.306415] [ 61.306415] [<c13a87aa>] dev_queue_xmit+0xa/0x10 [ 61.306415] [ 61.306415] [<c13b4837>] neigh_resolve_output+0x147/0x220 [ 61.306415] [ 61.306415] [<c144541b>] ip6_finish_output2+0x2fb/0x910 [ 61.306415] [ 61.306415] [<c14494e6>] ip6_finish_output+0xa6/0x1a0 [ 61.306415] [ 61.306415] [<c1449635>] ip6_output+0x55/0x320 [ 61.306415] [ 61.306415] [<c146f4d2>] mld_sendpack+0x352/0x560 [ 61.306415] [ 61.306415] [<c146fe55>] mld_ifc_timer_expire+0x155/0x280 [ 61.306415] [ 61.306415] [<c108b081>] call_timer_fn+0x81/0x270 [ 61.306415] [ 61.306415] [<c108b331>] expire_timers+0xc1/0x180 [ 61.306415] [ 61.306415] [<c108b4f7>] run_timer_softirq+0x77/0x150 [ 61.306415] [ 61.306415] [<c1043d04>] __do_softirq+0xb4/0x3d0 [ 61.306415] [ 61.306415] [<c101a15c>] do_softirq_own_stack+0x1c/0x30 [ 61.306415] [ 61.306415] [<c104416e>] irq_exit+0x8e/0xa0 [ 61.306415] [ 61.306415] [<c1019d31>] do_IRQ+0x51/0x100 [ 61.306415] [ 61.306415] [<c14bc176>] common_interrupt+0x36/0x40 [ 61.306415] [ 61.306415] [<c1134928>] set_root+0x68/0xf0 [ 61.306415] [ 61.306415] [<c1136120>] path_init+0x400/0x640 [ 61.306415] [ 61.306415] [<c11386bf>] path_lookupat+0xf/0xe0 [ 61.306415] [ 61.306415] [<c1139ebc>] filename_lookup+0x6c/0x100 [ 61.306415] [ 61.306415] [<c1139fd5>] user_path_at_empty+0x25/0x30 [ 61.306415] [ 61.306415] [<c11298c6>] SyS_faccessat+0x86/0x1e0 [ 61.306415] [ 61.306415] [<c1129a30>] SyS_access+0x10/0x20 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] INITIAL USE at: [ 61.306415] [ 61.306415] [<c107586e>] __lock_acquire+0x1fe/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14bb334>] _raw_spin_lock_irqsave+0x24/0x40 [ 61.306415] [ 61.306415] [<d093474e>] r6040_get_stats+0x1e/0x60 [r6040] [ 61.306415] [ 61.306415] [<c139fb16>] dev_get_stats+0x96/0xc0 [ 61.306415] [ 61.306415] [<c14b416e>] rtnl_fill_stats+0x36/0xfd [ 61.306415] [ 61.306415] [<c13b7b3c>] rtnl_fill_ifinfo+0x47c/0xce0 [ 61.306415] [ 61.306415] [<c13bc08e>] rtmsg_ifinfo_build_skb+0x4e/0xd0 [ 61.306415] [ 61.306415] [<c13bc120>] rtmsg_ifinfo.part.20+0x10/0x40 [ 61.306415] [ 61.306415] [<c13bc16b>] rtmsg_ifinfo+0x1b/0x20 [ 61.306415] [ 61.306415] [<c13a9d19>] register_netdevice+0x409/0x550 [ 61.306415] [ 61.306415] [<c13a9e72>] register_netdev+0x12/0x20 [ 61.306415] [ 61.306415] [<d09357e8>] r6040_init_one+0x3e8/0x500 [r6040] [ 61.306415] [ 61.306415] [<c12a78c7>] pci_device_probe+0x77/0xd0 [ 61.306415] [ 61.306415] [<c12f5e15>] driver_probe_device+0x145/0x280 [ 61.306415] [ 61.306415] [<c12f5fd9>] __driver_attach+0x89/0x90 [ 61.306415] [ 61.306415] [<c12f43ef>] bus_for_each_dev+0x4f/0x80 [ 61.306415] [ 61.306415] [<c12f5954>] driver_attach+0x14/0x20 [ 61.306415] [ 61.306415] [<c12f55b7>] bus_add_driver+0x197/0x210 [ 61.306415] [ 61.306415] [<c12f6a21>] driver_register+0x51/0xd0 [ 61.306415] [ 61.306415] [<c12a6955>] __pci_register_driver+0x45/0x50 [ 61.306415] [ 61.306415] [<d0938017>] 0xd0938017 [ 61.306415] [ 61.306415] [<c100043f>] do_one_initcall+0x2f/0x140 [ 61.306415] [ 61.306415] [<c10e48c0>] do_init_module+0x4a/0x19b [ 61.306415] [ 61.306415] [<c10a680e>] load_module+0x1b2e/0x2070 [ 61.306415] [ 61.306415] [<c10a6eb9>] SyS_finit_module+0x69/0x80 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] } [ 61.306415] ... key at: [<d0936280>] __key.45893+0x0/0xfffff739 [r6040] [ 61.306415] ... acquired at: [ 61.306415] [ 61.306415] [<c1074a32>] check_irq_usage+0x42/0xb0 [ 61.306415] [ 61.306415] [<c107677c>] __lock_acquire+0x110c/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0 [ 61.306415] [ 61.306415] [<c1336276>] phy_stop+0x16/0x80 [ 61.306415] [ 61.306415] [<d0934ce9>] r6040_close+0x89/0x230 [r6040] [ 61.306415] [ 61.306415] [<c13a0a91>] __dev_close_many+0x61/0xa0 [ 61.306415] [ 61.306415] [<c13a0bbf>] __dev_close+0x1f/0x30 [ 61.306415] [ 61.306415] [<c13a9127>] __dev_change_flags+0x87/0x150 [ 61.306415] [ 61.306415] [<c13a9213>] dev_change_flags+0x23/0x60 [ 61.306415] [ 61.306415] [<c1416238>] devinet_ioctl+0x5f8/0x6f0 [ 61.306415] [ 61.306415] [<c1417f75>] inet_ioctl+0x65/0x90 [ 61.306415] [ 61.306415] [<c1389b54>] sock_ioctl+0x124/0x2b0 [ 61.306415] [ 61.306415] [<c113cf7c>] do_vfs_ioctl+0x7c/0x790 [ 61.306415] [ 61.306415] [<c113d6b8>] SyS_ioctl+0x28/0x50 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] [ 61.306415] the dependencies between the lock to be acquired[ 61.306415] and SOFTIRQ-irq-unsafe lock: [ 61.306415] -> (&dev->lock){+.+...} ops: 56 { [ 61.306415] HARDIRQ-ON-W at: [ 61.306415] [ 61.306415] [<c1075be7>] __lock_acquire+0x577/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0 [ 61.306415] [ 61.306415] [<c133747d>] phy_probe+0x4d/0xc0 [ 61.306415] [ 61.306415] [<c1338afe>] phy_attach_direct+0xbe/0x190 [ 61.306415] [ 61.306415] [<c1338ca7>] phy_connect_direct+0x17/0x60 [ 61.306415] [ 61.306415] [<c1338d23>] phy_connect+0x33/0x70 [ 61.306415] [ 61.306415] [<d09357a0>] r6040_init_one+0x3a0/0x500 [r6040] [ 61.306415] [ 61.306415] [<c12a78c7>] pci_device_probe+0x77/0xd0 [ 61.306415] [ 61.306415] [<c12f5e15>] driver_probe_device+0x145/0x280 [ 61.306415] [ 61.306415] [<c12f5fd9>] __driver_attach+0x89/0x90 [ 61.306415] [ 61.306415] [<c12f43ef>] bus_for_each_dev+0x4f/0x80 [ 61.306415] [ 61.306415] [<c12f5954>] driver_attach+0x14/0x20 [ 61.306415] [ 61.306415] [<c12f55b7>] bus_add_driver+0x197/0x210 [ 61.306415] [ 61.306415] [<c12f6a21>] driver_register+0x51/0xd0 [ 61.306415] [ 61.306415] [<c12a6955>] __pci_register_driver+0x45/0x50 [ 61.306415] [ 61.306415] [<d0938017>] 0xd0938017 [ 61.306415] [ 61.306415] [<c100043f>] do_one_initcall+0x2f/0x140 [ 61.306415] [ 61.306415] [<c10e48c0>] do_init_module+0x4a/0x19b [ 61.306415] [ 61.306415] [<c10a680e>] load_module+0x1b2e/0x2070 [ 61.306415] [ 61.306415] [<c10a6eb9>] SyS_finit_module+0x69/0x80 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] SOFTIRQ-ON-W at: [ 61.306415] [ 61.306415] [<c1075c0c>] __lock_acquire+0x59c/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0 [ 61.306415] [ 61.306415] [<c133747d>] phy_probe+0x4d/0xc0 [ 61.306415] [ 61.306415] [<c1338afe>] phy_attach_direct+0xbe/0x190 [ 61.306415] [ 61.306415] [<c1338ca7>] phy_connect_direct+0x17/0x60 [ 61.306415] [ 61.306415] [<c1338d23>] phy_connect+0x33/0x70 [ 61.306415] [ 61.306415] [<d09357a0>] r6040_init_one+0x3a0/0x500 [r6040] [ 61.306415] [ 61.306415] [<c12a78c7>] pci_device_probe+0x77/0xd0 [ 61.306415] [ 61.306415] [<c12f5e15>] driver_probe_device+0x145/0x280 [ 61.306415] [ 61.306415] [<c12f5fd9>] __driver_attach+0x89/0x90 [ 61.306415] [ 61.306415] [<c12f43ef>] bus_for_each_dev+0x4f/0x80 [ 61.306415] [ 61.306415] [<c12f5954>] driver_attach+0x14/0x20 [ 61.306415] [ 61.306415] [<c12f55b7>] bus_add_driver+0x197/0x210 [ 61.306415] [ 61.306415] [<c12f6a21>] driver_register+0x51/0xd0 [ 61.306415] [ 61.306415] [<c12a6955>] __pci_register_driver+0x45/0x50 [ 61.306415] [ 61.306415] [<d0938017>] 0xd0938017 [ 61.306415] [ 61.306415] [<c100043f>] do_one_initcall+0x2f/0x140 [ 61.306415] [ 61.306415] [<c10e48c0>] do_init_module+0x4a/0x19b [ 61.306415] [ 61.306415] [<c10a680e>] load_module+0x1b2e/0x2070 [ 61.306415] [ 61.306415] [<c10a6eb9>] SyS_finit_module+0x69/0x80 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] INITIAL USE at: [ 61.306415] [ 61.306415] [<c107586e>] __lock_acquire+0x1fe/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0 [ 61.306415] [ 61.306415] [<c133747d>] phy_probe+0x4d/0xc0 [ 61.306415] [ 61.306415] [<c1338afe>] phy_attach_direct+0xbe/0x190 [ 61.306415] [ 61.306415] [<c1338ca7>] phy_connect_direct+0x17/0x60 [ 61.306415] [ 61.306415] [<c1338d23>] phy_connect+0x33/0x70 [ 61.306415] [ 61.306415] [<d09357a0>] r6040_init_one+0x3a0/0x500 [r6040] [ 61.306415] [ 61.306415] [<c12a78c7>] pci_device_probe+0x77/0xd0 [ 61.306415] [ 61.306415] [<c12f5e15>] driver_probe_device+0x145/0x280 [ 61.306415] [ 61.306415] [<c12f5fd9>] __driver_attach+0x89/0x90 [ 61.306415] [ 61.306415] [<c12f43ef>] bus_for_each_dev+0x4f/0x80 [ 61.306415] [ 61.306415] [<c12f5954>] driver_attach+0x14/0x20 [ 61.306415] [ 61.306415] [<c12f55b7>] bus_add_driver+0x197/0x210 [ 61.306415] [ 61.306415] [<c12f6a21>] driver_register+0x51/0xd0 [ 61.306415] [ 61.306415] [<c12a6955>] __pci_register_driver+0x45/0x50 [ 61.306415] [ 61.306415] [<d0938017>] 0xd0938017 [ 61.306415] [ 61.306415] [<c100043f>] do_one_initcall+0x2f/0x140 [ 61.306415] [ 61.306415] [<c10e48c0>] do_init_module+0x4a/0x19b [ 61.306415] [ 61.306415] [<c10a680e>] load_module+0x1b2e/0x2070 [ 61.306415] [ 61.306415] [<c10a6eb9>] SyS_finit_module+0x69/0x80 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] } [ 61.306415] ... key at: [<c1f28f39>] __key.43998+0x0/0x8 [ 61.306415] ... acquired at: [ 61.306415] [ 61.306415] [<c1074a32>] check_irq_usage+0x42/0xb0 [ 61.306415] [ 61.306415] [<c107677c>] __lock_acquire+0x110c/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0 [ 61.306415] [ 61.306415] [<c1336276>] phy_stop+0x16/0x80 [ 61.306415] [ 61.306415] [<d0934ce9>] r6040_close+0x89/0x230 [r6040] [ 61.306415] [ 61.306415] [<c13a0a91>] __dev_close_many+0x61/0xa0 [ 61.306415] [ 61.306415] [<c13a0bbf>] __dev_close+0x1f/0x30 [ 61.306415] [ 61.306415] [<c13a9127>] __dev_change_flags+0x87/0x150 [ 61.306415] [ 61.306415] [<c13a9213>] dev_change_flags+0x23/0x60 [ 61.306415] [ 61.306415] [<c1416238>] devinet_ioctl+0x5f8/0x6f0 [ 61.306415] [ 61.306415] [<c1417f75>] inet_ioctl+0x65/0x90 [ 61.306415] [ 61.306415] [<c1389b54>] sock_ioctl+0x124/0x2b0 [ 61.306415] [ 61.306415] [<c113cf7c>] do_vfs_ioctl+0x7c/0x790 [ 61.306415] [ 61.306415] [<c113d6b8>] SyS_ioctl+0x28/0x50 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] [ 61.306415] [ 61.306415] stack backtrace: [ 61.306415] CPU: 0 PID: 449 Comm: ifconfig Not tainted 4.9.0-gb898d2d-manuel #1 [ 61.306415] Call Trace: [ 61.306415] dump_stack+0x16/0x19 [ 61.306415] check_usage+0x3f6/0x550 [ 61.306415] ? check_usage+0x4d/0x550 [ 61.306415] check_irq_usage+0x42/0xb0 [ 61.306415] __lock_acquire+0x110c/0x1770 [ 61.306415] lock_acquire+0x7c/0x150 [ 61.306415] ? phy_stop+0x16/0x80 [ 61.306415] mutex_lock_nested+0x2d/0x4a0 [ 61.306415] ? phy_stop+0x16/0x80 [ 61.306415] ? r6040_close+0x24/0x230 [r6040] [ 61.306415] ? __delay+0x9/0x10 [ 61.306415] phy_stop+0x16/0x80 [ 61.306415] r6040_close+0x89/0x230 [r6040] [ 61.306415] __dev_close_many+0x61/0xa0 [ 61.306415] __dev_close+0x1f/0x30 [ 61.306415] __dev_change_flags+0x87/0x150 [ 61.306415] dev_change_flags+0x23/0x60 [ 61.306415] devinet_ioctl+0x5f8/0x6f0 [ 61.306415] inet_ioctl+0x65/0x90 [ 61.306415] sock_ioctl+0x124/0x2b0 [ 61.306415] ? dlci_ioctl_set+0x30/0x30 [ 61.306415] do_vfs_ioctl+0x7c/0x790 [ 61.306415] ? trace_hardirqs_on+0xb/0x10 [ 61.306415] ? call_rcu_sched+0xd/0x10 [ 61.306415] ? __put_cred+0x32/0x50 [ 61.306415] ? SyS_faccessat+0x178/0x1e0 [ 61.306415] SyS_ioctl+0x28/0x50 [ 61.306415] do_int80_syscall_32+0x3f/0x110 [ 61.306415] entry_INT80_32+0x2f/0x2f [ 61.306415] EIP: 0xb764d364 [ 61.306415] EFLAGS: 00000286 CPU: 0 [ 61.306415] EAX: ffffffda EBX: 00000004 ECX: 00008914 EDX: bfa99d7c [ 61.306415] ESI: bfa99e4c EDI: fffffffe EBP: 00000004 ESP: bfa99d58 [ 61.306415] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b [ 63.836607] r6040 0000:00:08.0 eth0: Link is Down Signed-off-by: NManuel Bessler <manuel.bessler@sensus.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> -
由 Dan Carpenter 提交于
In commit 99d8d215 ("irda: w83977af_ir: Neaten logging"), we accidentally added an extra tab to these lines. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Tested-by: NBert Kenward <bkenward@solarflare.com> Acked-by: NBert Kenward <bkenward@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> -
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> -
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> -
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> -
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> -
由 David S. Miller 提交于
Daniel Borkmann says: ==================== Couple of BPF fixes This set contains three BPF fixes for net, one that addresses the complaint from Geert wrt static allocations, and the other is a fix wrt mem accounting that I found recently during testing and there's still one more fix on the map value marking. Thanks! v1 -> v2: - Patch 1 as is. - Fixed kbuild bot issue by letting charging helpers stay in the syscall.c, since there locked_vm is valid and only export the ones needed by bpf_prog_realloc(). Add empty stubs in case the bpf syscall is not enabled. - Added patch 3 that addresses one more issue in map val marking. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net> -
由 Daniel Borkmann 提交于
Martin reported a verifier issue that hit the BUG_ON() for his test case in the mark_reg_unknown_value() function: [ 202.861380] kernel BUG at kernel/bpf/verifier.c:467! [...] [ 203.291109] Call Trace: [ 203.296501] [<ffffffff811364d5>] mark_map_reg+0x45/0x50 [ 203.308225] [<ffffffff81136558>] mark_map_regs+0x78/0x90 [ 203.320140] [<ffffffff8113938d>] do_check+0x226d/0x2c90 [ 203.331865] [<ffffffff8113a6ab>] bpf_check+0x48b/0x780 [ 203.343403] [<ffffffff81134c8e>] bpf_prog_load+0x27e/0x440 [ 203.355705] [<ffffffff8118a38f>] ? handle_mm_fault+0x11af/0x1230 [ 203.369158] [<ffffffff812d8188>] ? security_capable+0x48/0x60 [ 203.382035] [<ffffffff811351a4>] SyS_bpf+0x124/0x960 [ 203.393185] [<ffffffff810515f6>] ? __do_page_fault+0x276/0x490 [ 203.406258] [<ffffffff816db320>] entry_SYSCALL_64_fastpath+0x13/0x94 This issue got uncovered after the fix in a08dd0da ("bpf: fix regression on verifier pruning wrt map lookups"). The reason why it wasn't noticed before was, because as mentioned in a08dd0da, mark_map_regs() was doing the id matching incorrectly based on the uncached regs[regno].id. So, in the first loop, we walked all regs and as soon as we found regno == i, then this reg's id was cleared when calling mark_reg_unknown_value() thus that every subsequent register was probed against id of 0 (which, in combination with the PTR_TO_MAP_VALUE_OR_NULL type is an invalid condition that no other register state can hold), and therefore wasn't type transitioned such as in the spilled register case for the second loop. Now since that got fixed, it turned out that 57a09bf0 ("bpf: Detect identical PTR_TO_MAP_VALUE_OR_NULL registers") used mark_reg_unknown_value() incorrectly for the spilled regs, and thus hitting the BUG_ON() in some cases due to regno >= MAX_BPF_REG. Although spilled regs have the same type as the non-spilled regs for the verifier state, that is, struct bpf_reg_state, they are semantically different from the non-spilled regs. In other words, there can be up to 64 (MAX_BPF_STACK / BPF_REG_SIZE) spilled regs in the stack, for example, register R<x> could have been spilled by the program to stack location X, Y, Z, and in mark_map_regs() we need to scan these stack slots of type STACK_SPILL for potential registers that we have to transition from PTR_TO_MAP_VALUE_OR_NULL. Therefore, depending on the location, the spilled_regs regno can be a lot higher than just MAX_BPF_REG's value since we operate on stack instead. The reset in mark_reg_unknown_value() itself is just fine, only that the BUG_ON() was inappropriate for this. Fix it by making a __mark_reg_unknown_value() version that can be called from mark_map_reg() generically; we know for the non-spilled case that the regno is always < MAX_BPF_REG anyway. Fixes: 57a09bf0 ("bpf: Detect identical PTR_TO_MAP_VALUE_OR_NULL registers") Reported-by: NMartin KaFai Lau <kafai@fb.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
Commit aaac3ba9 ("bpf: charge user for creation of BPF maps and programs") made a wrong assumption of charging against prog->pages. Unlike map->pages, prog->pages are still subject to change when we need to expand the program through bpf_prog_realloc(). This can for example happen during verification stage when we need to expand and rewrite parts of the program. Should the required space cross a page boundary, then prog->pages is not the same anymore as its original value that we used to bpf_prog_charge_memlock() on. Thus, we'll hit a wrap-around during bpf_prog_uncharge_memlock() when prog is freed eventually. I noticed this that despite having unlimited memlock, programs suddenly refused to load with EPERM error due to insufficient memlock. There are two ways to fix this issue. One would be to add a cached variable to struct bpf_prog that takes a snapshot of prog->pages at the time of charging. The other approach is to also account for resizes. I chose to go with the latter for a couple of reasons: i) We want accounting rather to be more accurate instead of further fooling limits, ii) adding yet another page counter on struct bpf_prog would also be a waste just for this purpose. We also do want to charge as early as possible to avoid going into the verifier just to find out later on that we crossed limits. The only place that needs to be fixed is bpf_prog_realloc(), since only here we expand the program, so we try to account for the needed delta and should we fail, call-sites check for outcome anyway. On cBPF to eBPF migrations, we don't grab a reference to the user as they are charged differently. With that in place, my test case worked fine. Fixes: aaac3ba9 ("bpf: charge user for creation of BPF maps and programs") Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
Geert rightfully complained that 7bd509e3 ("bpf: add prog_digest and expose it via fdinfo/netlink") added a too large allocation of variable 'raw' from bss section, and should instead be done dynamically: # ./scripts/bloat-o-meter kernel/bpf/core.o.1 kernel/bpf/core.o.2 add/remove: 3/0 grow/shrink: 0/0 up/down: 33291/0 (33291) function old new delta raw - 32832 +32832 [...] Since this is only relevant during program creation path, which can be considered slow-path anyway, lets allocate that dynamically and be not implicitly dependent on verifier mutex. Move bpf_prog_calc_digest() at the beginning of replace_map_fd_with_map_ptr() and also error handling stays straight forward. Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile由 Linus Torvalds 提交于
Pull arch/tile updates from Chris Metcalf: "Another grab-bag of miscellaneous changes" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: use __ro_after_init instead of tile-specific __write_once tile: migrate exception table users off module.h and onto extable.h tile: remove #pragma unroll from finv_buffer_remote() tile-module: Rename jump labels in module_alloc() tile-module: Use kmalloc_array() in module_alloc() tile/pci_gx: fix spelling mistake: "delievered" -> "delivered"
-
git://github.com/01org/gvt-linux由 Linus Torvalds 提交于
Pull i915/gvt KVMGT updates from Zhenyu Wang: "KVMGT support depending on the VFIO/mdev framework" * tag 'kvmgt-vfio-mdev-for-v4.10-rc1' of git://github.com/01org/gvt-linux: drm/i915/gvt/kvmgt: add vfio/mdev support to KVMGT drm/i915/gvt/kvmgt: read/write GPA via KVM API drm/i915/gvt/kvmgt: replace kmalloc() by kzalloc()
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input subsystem updates from Dmitry Torokhov: - updated support for Synaptics RMI4 devices, including support for SMBus controllers, firmware update support, sensor tuning, and PS/2 guest support - ALPS driver now supports tracksticks on SS5 controllers - i8042 now uses chassis info to skip selftest on Asus laptops as list of individual models became too unwieldy - miscellaneous fixes to other drivers * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (67 commits) Input: imx6ul_tsc - generalize the averaging property Input: drv260x - use generic device properties Input: drv260x - use temporary for &client->dev Input: drv260x - fix input device's parent assignment Input: synaptics-rmi4 - add support for F34 V7 bootloader Input: drv260x - fix initializing overdrive voltage Input: ALPS - fix protcol -> protocol Input: i8042 - comment #else/#endif of CONFIG_PNP Input: lpc32xx-keys - fix invalid error handling of a requested irq Input: synaptics-rmi4 - fix debug for sensor clip Input: synaptics-rmi4 - store the attn data in the driver Input: synaptics-rmi4 - allow to add attention data Input: synaptics-rmi4 - f03 - grab data passed by transport device Input: synaptics-rmi4 - add support for F03 Input: imx6ul_tsc - convert int to u32 Input: imx6ul_tsc - add mask when set REG_ADC_CFG Input: synaptics-rmi4 - have only one struct platform data Input: synaptics-rmi4 - remove EXPORT_SYMBOL_GPL for internal functions Input: synaptics-rmi4 - remove mutex calls while updating the firmware Input: drv2667 - fix misuse of regmap_update_bits ...
-
git://git.infradead.org/linux-mtd由 Linus Torvalds 提交于
Pull MTD updates from Brian Norris: "Nothing enormous here, though notably we have some of the first work of a few new maintainers. I think for now I'll still be sending pull requests, but that's open to change in the future. Summary: Core: - dynamic BDI object allocation (resolves some problems when built as a module) - cleanups in the ooblayout handling NAND: - new tango NAND controller driver - new ox820 NAND controller driver - addition of a new full-ID entry in the nand_ids table - rework of the s3c240 driver to support DT - extension of the nand_sdr_timings to expose tCCS, tPROG and tR - addition of a new flag to ask the core to wait for tCCS when sending a RNDIN/RNDOUT command - addition of a new flag to ask the core to let the controller driver send the READ/PROGPAGE command Minor fixes/cleanup/cosmetic changes: - properly support 512 ECC step size in the sunxi driver - improve the error messages in the PXA probe path - fix module autoload in the omap2 driver - cleanup of several nand drivers to return nand_scan{_tail}() error code instead of returning -EIO - various cleanups in the denali driver - fix an error check in nandsim SPI NOR: - new flash IDs - wait for Spansion flash to be ready after quad-enable - error handling fixes for Candence QSPI - constify some structures in Freescale QSPI driver" * tag 'for-linus-20161216' of git://git.infradead.org/linux-mtd: (71 commits) mtd: Allocate bdi objects dynamically mtd: nand: tango: Add standard legalese header mtd: maps: add missing iounmap() in error path mtd: spi-nor: constify fsl_qspi_devtype_data mtd: spi-nor: Add support for mr25h40 mtd: spi-nor: Add support for N25Q016A mtd: spi-nor: Add at25df321 spi-nor flash support mtd: spi-nor: Fix some error codes in cqspi_setup_flash() mtd: spi-nor: Off by one in cqspi_setup_flash() mtd: spi-nor: add support for s25fl208k mtd: spi-nor: fix flags for s25fl128s mtd: spi-nor: fix spansion quad enable mtd: spi-nor: add Macronix mx25u25635f to list of known devices. mtd: mtdswap: fix spelling mistake "erassure" -> "erasure" mtd: bcm47xxpart: fix parsing first block after aligned TRX mtd: nand: tango: Use nand_to_mtd() instead of directly accessing chip->mtd mtd: remove unneeded initializer in mtd_ooblayout_count_bytes() mtd: use min_t() to refactor mtd_ooblayout_{get, set}_bytes() mtd: remove unneeded initializer in mtd_ooblayout_{get, set}_bytes() mtd: nand: nandsim: fix error check ... -
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild由 Linus Torvalds 提交于
Pull kbuild misc updates from Michal Marek: - one new coccinelle check and improvements to irqf_oneshot.cocci - 'make rpm' POSIX compatibility fix - 'make deb-pkg' arm64 cross-compiling fix. I forgot to send this one during the v4.9 rc-phase, therefor the pull request is based on -rc6 and not -rc1 * 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: Coccinelle: misc: Add support for devm variant in all modes Coccinelle: misc: Improve the result given by context mode Coccinelle: misc: Improve the matching of rules kbuild/mkspec: avoid using brace expansion Coccinelle: Add misc/boolconv.cocci builddeb: fix cross-building to arm64 producing host-arch debs
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild由 Linus Torvalds 提交于
Pull kconfig updates from Michal Marek: - 'make xconfig' gui fixes - 'make nconfig' fix for options with long prompts - fix 'make nconfig' warning when pkg-config forces -D_GNU_SOURCE * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: xconfig: fix missing suboption and help panels on first run xconfig: fix 'Show Debug' functionality kconfig/nconf: Fix hang when editing symbol with a long prompt Scripts: kconfig: nconf: fix _GNU_SOURCE redefined warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild由 Linus Torvalds 提交于
Pull kbuild updates from Michal Marek: - prototypes for x86 asm-exported symbols (Adam Borowski) and a warning about missing CRCs (Nick Piggin) - asm-exports fix for LTO (Nicolas Pitre) - thin archives improvements (Nick Piggin) - linker script fix for CONFIG_LD_DEAD_CODE_DATA_ELIMINATION (Nick Piggin) - genksyms support for __builtin_va_list keyword - misc minor fixes * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: x86/kbuild: enable modversions for symbols exported from asm kbuild: fix scripts/adjust_autoksyms.sh* for the no modules case scripts/kallsyms: remove last remnants of --page-offset option make use of make variable CURDIR instead of calling pwd kbuild: cmd_export_list: tighten the sed script kbuild: minor improvement for thin archives build kbuild: modpost warn if export version crc is missing kbuild: keep data tables through dead code elimination kbuild: improve linker compatibility with lib-ksyms.o build genksyms: Regenerate parser kbuild/genksyms: handle va_list type kbuild: thin archives for multi-y targets kbuild: kallsyms allow 3-pass generation if symbols size has changed
-
git://git.lwn.net/linux由 Linus Torvalds 提交于
Pull more documentation updates from Jonathan Corbet: "This converts the crypto DocBook to Sphinx" * tag 'docs-4.10-2' of git://git.lwn.net/linux: crypto: doc - optimize compilation crypto: doc - clarify AEAD memory structure crypto: doc - remove crypto_alloc_ablkcipher crypto: doc - add KPP documentation crypto: doc - fix separation of cipher / req API crypto: doc - fix source comments for Sphinx crypto: doc - remove crypto API DocBook crypto: doc - convert crypto API documentation to Sphinx
-
由 David S. Miller 提交于
Pablo Neira Ayuso says: ==================== GTP tunneling fixes for net The following patchset contains two GTP tunneling fixes for your net tree, they are: 1) Offset to IPv4 header in gtp_check_src_ms_ipv4() is incorrect, thus this function always succeeds and therefore this defeats this sanity check. This allows packets that have no PDP to go though, patch from Lionel Gauthier. 2) According to Note 0 of Figure 2 in Section 6 of 3GPP TS 29.060 v13.5.0 Release 13, always set GTPv1 reserved bit to zero. This may cause interoperability problems, patch from Harald Welte. Please, apply, thanks a lot! ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net> -
由 Harald Welte 提交于
When generating a GTPv1 header in gtp1_push_header(), initialize the 'reserved' bit to zero. All 3GPP specifications for GTPv1 from Release 99 through Release 13 agree that a transmitter shall set this bit to zero, see e.g. Note 0 of Figure 2 in Section 6 of 3GPP TS 29.060 v13.5.0 Release 13, available from http://www.etsi.org/deliver/etsi_ts/129000_129099/129060/13.05.00_60/ts_129060v130500p.pdfSigned-off-by: NHarald Welte <laforge@gnumonks.org> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lionel Gauthier 提交于
gtp_check_src_ms_ipv4() did not find the PDP context matching with the UE IP address because the memory location is not right, but the result is inverted by the Boolean "not" operator. So whatever is the PDP context, any call to this function is successful. Signed-off-by: NLionel Gauthier <Lionel.Gauthier@eurecom.fr> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kees Cook 提交于
Prepare to mark sensitive kernel structures for randomization by making sure they're using designated initializers. These were identified during allyesconfig builds of x86, arm, and arm64, with most initializer fixes extracted from grsecurity. Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kees Cook 提交于
Prepare to mark sensitive kernel structures for randomization by making sure they're using designated initializers. These were identified during allyesconfig builds of x86, arm, and arm64, with most initializer fixes extracted from grsecurity. Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kees Cook 提交于
Prepare to mark sensitive kernel structures for randomization by making sure they're using designated initializers. These were identified during allyesconfig builds of x86, arm, and arm64, with most initializer fixes extracted from grsecurity. Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-