Change the write path to encrypt the data only when the page is written to
disk in ecryptfs_writepage. Previously, ecryptfs encrypts the page in
ecryptfs_write_end which means that if there are multiple write requests to
the same page, ecryptfs ends up re-encrypting that page over and over again.
This patch minimizes the number of encryptions needed.
Signed-off-by: NThieu Le <thieule@chromium.org>
[tyhicks: Changed NULL .drop_inode sop pointer to generic_drop_inode]
Signed-off-by: NTyler Hicks <tyhicks@linux.vnet.ibm.com>

Now that grow_file() is not called in the ecryptfs_create() path, the
ECRYPTFS_NEW_FILE flag is no longer needed. It helped
ecryptfs_readpage() know not to decrypt zeroes that were read from the
lower file in the grow_file() path.
Signed-off-by: NTyler Hicks <tyhicks@linux.vnet.ibm.com>

When creating a new eCryptfs file, the crypto metadata is written out
and then the lower file was being "grown" with 4 kB of encrypted zeroes.
I suspect that growing the encrypted file was to prevent an information
leak that the unencrypted file was empty. However, the unencrypted file
size is stored, in plaintext, in the metadata so growing the file is
unnecessary.
Signed-off-by: NTyler Hicks <tyhicks@linux.vnet.ibm.com>

* 'nfs-for-2.6.39' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (28 commits)
  Cleanup XDR parsing for LAYOUTGET, GETDEVICEINFO
  NFSv4.1 convert layoutcommit sync to boolean
  NFSv4.1 pnfs_layoutcommit_inode fixes
  NFS: Determine initial mount security
  NFS: use secinfo when crossing mountpoints
  NFS: Add secinfo procedure
  NFS: lookup supports alternate client
  NFS: convert call_sync() to a function
  NFSv4.1 remove temp code that prevented ds commits
  NFSv4.1: layoutcommit
  NFSv4.1: filelayout driver specific code for COMMIT
  NFSv4.1: remove GETATTR from ds commits
  NFSv4.1: add generic layer hooks for pnfs COMMIT
  NFSv4.1: alloc and free commit_buckets
  NFSv4.1: shift filelayout_free_lseg
  NFSv4.1: pull out code from nfs_commit_release
  NFSv4.1: pull error handling out of nfs_commit_list
  NFSv4.1: add callback to nfs4_commit_done
  NFSv4.1: rearrange nfs_commit_rpcsetup
  NFSv4.1: don't send COMMIT to ds for data sync writes
  ...

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (43 commits)
  ext4: fix a BUG in mb_mark_used during trim.
  ext4: unused variables cleanup in fs/ext4/extents.c
  ext4: remove redundant set_buffer_mapped() in ext4_da_get_block_prep()
  ext4: add more tracepoints and use dev_t in the trace buffer
  ext4: don't kfree uninitialized s_group_info members
  ext4: add missing space in printk's in __ext4_grp_locked_error()
  ext4: add FITRIM to compat_ioctl.
  ext4: handle errors in ext4_clear_blocks()
  ext4: unify the ext4_handle_release_buffer() api
  ext4: handle errors in ext4_rename
  jbd2: add COW fields to struct jbd2_journal_handle
  jbd2: add the b_cow_tid field to journal_head struct
  ext4: Initialize fsync transaction ids in ext4_new_inode()
  ext4: Use single thread to perform DIO unwritten convertion
  ext4: optimize ext4_bio_write_page() when no extent conversion is needed
  ext4: skip orphan cleanup if fs has unknown ROCOMPAT features
  ext4: use the nblocks arg to ext4_truncate_restart_trans()
  ext4: fix missing iput of root inode for some mount error paths
  ext4: make FIEMAP and delayed allocation play well together
  ext4: suppress verbose debugging information if malloc-debug is off
  ...

Fi up conflicts in fs/ext4/super.c due to workqueue changes

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: fix issue with calling blk_stop_queue() from the request_fn handler
  block: fix bug with inserting flush requests as sort/merge

When the queue work handler was converted to delayed work, the
stopping was inadvertently made sync as well. Change this back
to being async stop, using __cancel_delayed_work() instead of
cancel_delayed_work().
Reported-by: NJeremy Fitzhardinge <jeremy@goop.org>
Reported-by: NChris Mason <chris.mason@oracle.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

With the introduction of the on-stack plugging, we would assume
that any request being inserted was a normal file system request.
As flush/fua requires a special insert mode, this caused problems.

Fix this up by checking for this in flush_plug_list() and use
the appropriate insert mechanism.

Big thanks goes to Markus Tripplesdorf for tirelessly testing
patches, and to Sergey Senozhatsky for helping find the real
issue.
Reported-by: NMarkus Tripplesdorf <markus@trippelsdorf.de>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  fs: simplify iget & friends
  fs: pull inode->i_lock up out of writeback_single_inode
  fs: rename inode_lock to inode_hash_lock
  fs: move i_wb_list out from under inode_lock
  fs: move i_sb_list out from under inode_lock
  fs: remove inode_lock from iput_final and prune_icache
  fs: Lock the inode LRU list separately
  fs: factor inode disposal
  fs: protect inode->i_state with inode->i_lock
  autofs4: Do not potentially dereference NULL pointer returned by fget() in autofs_dev_ioctl_setpipefd()
  autofs4 - remove autofs4_lock
  autofs4 - fix d_manage() return on rcu-walk
  autofs4 - fix autofs4_expire_indirect() traversal
  autofs4 - fix dentry leak in autofs4_expire_direct()
  autofs4 - reinstate last used update on access
  vfs - check non-mountpoint dentry might block in __follow_mount_rcu()

Fix the following compile failure:

  drivers/media/rc/ite-cir.c: In function 'ite_decode_bytes':
  drivers/media/rc/ite-cir.c:190: error: implicit declaration of function 'generic_find_next_le_bit'
  drivers/media/rc/ite-cir.c:199: error: implicit declaration of function 'generic_find_next_zero_le_bit'

Caused by commit 620a32bb ("[media] rc: New rc-based ite-cir driver
for several ITE CIRs") interacting with commit c4945b9e
("asm-generic: rename generic little-endian bitops functions").
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge get_new_inode/get_new_inode_fast into iget5_locked/iget_locked
as those were the only callers.  Remove the internal ifind/ifind_fast
helpers - ifind_fast only had a single caller, and ifind had two
callers wanting it to do different things.  Also clean up the comments
in this area to focus on information important to a developer trying
to use it, instead of overloading them with implementation details.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

First thing we do in writeback_single_inode() is take the i_lock and
the last thing we do is drop it. A caller already holds the i_lock,
so pull the i_lock out of writeback_single_inode() to reduce the
round trips on this lock during inode writeback.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

All that remains of the inode_lock is protecting the inode hash list
manipulation and traversals. Rename the inode_lock to
inode_hash_lock to reflect it's actual function.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Protect the inode writeback list with a new global lock
inode_wb_list_lock and use it to protect the list manipulations and
traversals. This lock replaces the inode_lock as the inodes on the
list can be validity checked while holding the inode->i_lock and
hence the inode_lock is no longer needed to protect the list.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Protect the per-sb inode list with a new global lock
inode_sb_list_lock and use it to protect the list manipulations and
traversals. This lock replaces the inode_lock as the inodes on the
list can be validity checked while holding the inode->i_lock and
hence the inode_lock is no longer needed to protect the list.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Now that inode state changes are protected by the inode->i_lock and
the inode LRU manipulations by the inode_lru_lock, we can remove the
inode_lock from prune_icache and the initial part of iput_final().

instead of using the inode_lock to protect the inode during
iput_final, use the inode->i_lock instead. This protects the inode
against new references being taken while we change the inode state
to I_FREEING, as well as preventing prune_icache from grabbing the
inode while we are manipulating it. Hence we no longer need the
inode_lock in iput_final prior to setting I_FREEING on the inode.

For prune_icache, we no longer need the inode_lock to protect the
LRU list, and the inodes themselves are protected against freeing
races by the inode->i_lock. Hence we can lift the inode_lock from
prune_icache as well.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Introduce the inode_lru_lock to protect the inode_lru list. This
lock is nested inside the inode->i_lock to allow the inode to be
added to the LRU list in iput_final without needing to deal with
lock inversions. This keeps iput_final() clean and neat.

Further, where marking the inode I_FREEING and removing it from the
LRU, move the LRU list manipulation within the inode->i_lock to keep
the list manipulation consistent with iput_final. This also means
that most of the open coded LRU list removal + unused inode
accounting can now use the inode_lru_list_del() wrappers which
cleans the code up further.

However, this locking change means what the LRU traversal in
prune_icache() inverts this lock ordering and needs to use trylock
semantics on the inode->i_lock to avoid deadlocking. In these cases,
if we fail to lock the inode we move it to the back of the LRU to
prevent spinning on it.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

We have a couple of places that dispose of inodes. factor the
disposal into evict() to isolate this code and make it simpler to
peel away the inode_lock from the code.

While doing this, change the logic flow in iput_final() to separate
the different cases that need to be handled to make the transitions
the inode goes through more obvious.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Protect inode state transitions and validity checks with the
inode->i_lock. This enables us to make inode state transitions
independently of the inode_lock and is the first step to peeling
away the inode_lock from the code.

This requires that __iget() is done atomically with i_state checks
during list traversals so that we don't race with another thread
marking the inode I_FREEING between the state check and grabbing the
reference.

Also remove the unlock_new_inode() memory barrier optimisation
required to avoid taking the inode_lock when clearing I_NEW.
Simplify the code by simply taking the inode->i_lock around the
state change and wakeup. Because the wakeup is no longer tricky,
remove the wake_up_inode() function and open code the wakeup where
necessary.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

* 'slab/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  SLUB: Write to per cpu data when allocating it
  slub: Fix debugobjects with lockless fastpath

Commit ddd588b5 ("oom: suppress nodes that are not allowed from
meminfo on oom kill") moved lib/show_mem.o out of lib/lib.a, which
resulted in build warnings on all architectures that implement their own
versions of show_mem():

	lib/lib.a(show_mem.o): In function `show_mem':
	show_mem.c:(.text+0x1f4): multiple definition of `show_mem'
	arch/sparc/mm/built-in.o:(.text+0xd70): first defined here

The fix is to remove __show_mem() and add its argument to show_mem() in
all implementations to prevent this breakage.

Architectures that implement their own show_mem() actually don't do
anything with the argument yet, but they could be made to filter nodes
that aren't allowed in the current context in the future just like the
generic implementation.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Reported-by: NJames Bottomley <James.Bottomley@hansenpartnership.com>
Suggested-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/vblank: update recently added vbl interface to be more future proof.
  drm radeon: Return -EINVAL on wrong pm sysfs access
  drm/radeon/kms: fix hardcoded EDID handling
  Revert "drm/i915: Don't save/restore hardware status page address register"
  drm/i915: Avoid unmapping pages from a NULL address space
  drm/i915: Fix use after free within tracepoint
  drm/i915: Restore missing command flush before interrupt on BLT ring
  drm/i915: Disable pagefaults along execbuffer relocation fast path
  drm/i915: Fix computation of pitch for dumb bo creator
  drm/i915: report correct render clock frequencies on SNB
  drm/i915/dp: Correct the order of deletion for ghost eDP devices
  drm/i915: Fix tiling corruption from pipelined fencing
  drm/i915: Re-enable self-refresh
  drm/i915: Prevent racy removal of request from client list
  drm/i915: skip redundant operations whilst enabling pipes and planes
  drm/i915: Remove surplus POSTING_READs before wait_for_vblank
  drm/radeon/kms: prefer legacy pll algo for tv-out
  drm: check for modesetting on modeset ioctls
  drm/kernel: vblank wait on crtc > 1
  drm: Fix use-after-free in drm_gem_vm_close()

changes LAYOUTGET and GETDEVICEINFO XDR parsing to:
 - not use vmap, which doesn't work on incoherent archs
 - use xdr_stream parsing for all xdr
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

It turns out that the cmpxchg16b emulation has to access vmalloced
percpu memory with interrupts disabled. If the memory has never
been touched before then the fault necessary to establish the
mapping will not to occur and the kernel will fail on boot.

Fix that by reusing the CONFIG_PREEMPT code that writes the
cpu number into a field on every cpu. Writing to the per cpu
area before causes the mapping to be established before we get
to a cmpxchg16b emulation.
Tested-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NChristoph Lameter <cl@linux.com>
Signed-off-by: NPekka Enberg <penberg@kernel.org>

Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Test NFS_INO_LAYOUTCOMMIT before kzalloc
Mark inode dirty to retry LAYOUTCOMMIT on kzalloc failure.
Add comments.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

On Thu, 24 Mar 2011, Ingo Molnar wrote:
> RIP: 0010:[<ffffffff810570a9>]  [<ffffffff810570a9>] get_next_timer_interrupt+0x119/0x260

That's a typical timer crash, but you were unable to debug it with
debugobjects because commit d3f661d6 broke those.

Cc: Christoph Lameter <cl@linux.com>
Tested-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NPekka Enberg <penberg@kernel.org>

autofs4: Do not potentially dereference NULL pointer returned by fget() in autofs_dev_ioctl_setpipefd()

In fs/autofs4/dev-ioctl.c::autofs_dev_ioctl_setpipefd() we call fget(),
which may return NULL, but we do not explicitly test for that NULL return
so we may end up dereferencing a NULL pointer - bad.

When I originally submitted this patch I had chosen EBUSY as the return
value to use if this happens. Ian Kent was kind enough to explain why that
would most likely be wrong and why EBADF should most likely be used
instead. This version of the patch uses EBADF.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NIan Kent <raven@themaw.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The autofs4_lock introduced by the rcu-walk changes has unnecessarily
broad scope. The locking is better handled by the per-autofs super
block lookup_lock.
Signed-off-by: NIan Kent <raven@themaw.net>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The daemon never needs to block and, in the rcu-walk case an error
return isn't used, so always return zero.
Signed-off-by: NIan Kent <raven@themaw.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The vfs-scale changes changed the traversal used in
autofs4_expire_indirect() from a list to a depth first tree traversal
which isn't right.
Signed-off-by: NIan Kent <raven@themaw.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

There is a missing dput() when returning from autofs4_expire_direct()
when we see that the dentry is already a pending mount.
Signed-off-by: NIan Kent <raven@themaw.net>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

When direct (and offset) mounts were introduced the the last used
timeout could no longer be updated in ->d_revalidate(). This is
because covered direct mounts would be followed over without calling
the autofs file system. As a result the definition of the busyness
check for all entries was changed to be "actually busy" being an open
file or working directory within the automount. But now we have a call
back in the follow so the last used update on any access can be
re-instated. This requires DCACHE_MANAGE_TRANSIT to always be set.
Signed-off-by: NIan Kent <raven@themaw.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

When following a mount in rcu-walk mode we must check if the incoming dentry
is telling us it may need to block, even if it isn't actually a mountpoint.
Signed-off-by: NIan Kent <raven@themaw.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

When sec=<something> is not presented as a mount option,
we should attempt to determine what security flavor the
server is using.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

A submount may use different security than the parent
mount does.  We should figure out what sec flavor the
submount uses at mount time.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This patch adds the nfs4 operation secinfo as a
valid nfs rpc operation.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

A later patch will need to perform a lookup using an
alternate client with a different security flavor.
This patch adds support for doing that on NFS v4.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This patch changes nfs4_call_sync() from a macro into a
static inline function.  As a macro, the call_sync()
function will not do any type checking and depends
on the sequence arguments always having the same name.
As a function, we get to have type checking and can
rename the arguments if we so choose.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>