- 30 1月, 2008 40 次提交
-
-
由 Trond Myklebust 提交于
If a (broken?) server hands out two different delegations for the same file, then we should return one of them. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Thanks to Yawei Niu for spotting the race. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Otherwise, there is a potential deadlock if the last dput() from an NFSv4 close() or other asynchronous operation leads to nfs_clear_inode calling the synchronous delegreturn. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Benny Halevy 提交于
Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Benny Halevy 提交于
use NFS_I(inode)->flags instead Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
David Howells noticed that repeating the same mount option twice during an NFS mount request can result in orphaned memory in certain cases. Only the client_address and mount_server.hostname strings are initialized in the mount parsing loop, so those appear to be the only two pointers that might be written over by repeating a mount option. The strings in the nfs_server section of the nfs_parsed_mount_data structure are set only once after the options are parsed, thus these are not susceptible to being overwritten. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 J. Bruce Fields 提交于
The rfc doesn't give any reason it shouldn't be possible to set an attribute on a non-regular file. And if the server supports it, then it shouldn't be up to us to prevent it. Thanks to Erez for the report and Trond for further analysis. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Tested-by: NErez Zadok <ezk@cs.sunysb.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
There are no interruptible waits for asynchronous RPC tasks, so we don't need to wrap calls to rpc_run_task() with an rpc_clnt_sigmask/rpc_clnt_unsigmask pair. Instead we can wrap the wait_for_completion_interruptible() in nfs_direct_wait(). This means that we completely optimise away sigmask setting for the case of non-blocking aio/dio. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
The caller will never sleep in rpc_execute, so don't bother setting the sigmask. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
The variable "sin" is a pointer, so sizeof(sin) is the size of a pointer, not the size of thing that sin points to. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: Follow recommendations of Chapter 5 of Documentation/CodingStyle and use "u32" instead of "__u32" for types in definitions that are not shared with user space. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
rpc_create() can already fill in the hostname with a string representation of the server's IP address, so remove redundant logic in in rpcb_getport_sync() that does that. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: document the rule (kfree) and the exceptions (RPC_DISPLAY_PROTO and RPC_DISPLAY_NETID) when freeing the objects in a transport's address_strings array. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
RPC protocol version numbers are unsigned. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: pass 5 arguments to nlmclnt_init() in a structure similar to the new nfs_client_initdata structure. Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
-
由 Chuck Lever 提交于
Now that each NFS mount point caches its own nlm_host structure, it can be passed to nlmclnt_proc() for each lock request. By pinning an nlm_host for each mount point, we trade the overhead of looking up or creating a fresh nlm_host struct during every NLM procedure call for a little extra memory. We also restrict the nlmclnt_proc symbol to limit the use of this call to in-tree modules. Note that nlm_lookup_host() (just removed from the client's per-request NLM processing) could also trigger an nlm_host garbage collection. Now client-side nlm_host garbage collection occurs only during NFS mount processing. Since the NFS client now holds a reference on these nlm_host structures, they wouldn't have been affected by garbage collection anyway. Given that nlm_lookup_host() reorders the global nlm_host chain after every successful lookup, and that a garbage collection could be triggered during the call, we've removed a significant amount of per-NLM-request CPU processing overhead. Sidebar: there are only a few remaining references to the internals of NFS inodes in the client-side NLM code. The only references I found are related to extracting or comparing the inode's file handle via NFS_FH(). One is in nlmclnt_grant(); the other is in nlmclnt_setlockargs(). Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Cache an appropriate nlm_host structure in the NFS client's mount point metadata for later use. Note that there is no need to set NFS_MOUNT_NONLM in the error case -- if nfs_start_lockd() returns a non-zero value, its callers ensure that the mount request fails outright. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
We would like to remove the per-lock-operation nlm_lookup_host() call from nlmclnt_proc(). The new architecture pins an nlm_host structure to each NFS client superblock that has the "lock" mount option set. The NFS client passes in the pinned nlm_host structure during each call to nlmclnt_proc(). NFS client unmount processing "puts" the nlm_host so it can be garbage- collected later. This patch introduces externally callable NLM functions that handle mount-time nlm_host set up and tear-down. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
...and eliminate an unnecessary cast. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: have the set up routines explicitly pass the strings to be used for the transport name and NETID. This removes a number of conditionals and dependencies on rpc_xprt.prot, which is overloaded. Tighten up type checking on the address_strings array while we're at it. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
The cookie->len field is unsigned, so the loop index variable in nlmdbg_cookie2a() should also be unsigned. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: commit 4899f9c8 added nfs_write_end(), which introduces a conditional expression that returns an unsigned integer in one arm and a signed integer in the other. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: PAGE_CACHE_SIZE is unsigned, and nfs_pageio_init() takes a size_t. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: always use the same type when handling buffer lengths. As a bonus, this prevents a mixed sign comparison in idmap_lookup_name. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
The idmap_pipe_upcall() function expects the copy_to_user() function to return a negative error value if the call fails, but copy_to_user() returns an unsigned long number of bytes that couldn't be copied. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up white space damage and use standard kernel coding conventions for return statements. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
The gss_pipe_upcall() function expects the copy_to_user() function to return a negative error value if the call fails, but copy_to_user() returns an unsigned long number of bytes that couldn't be copied. Can rpc_pipefs actually retry a partially completed upcall read? If not, then gss_pipe_upcall() should punt any partial read, just like the upcall logic in net/sunrpc/cache.c. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Currently, if you have a server mounted using networking protocol, you cannot specify a different value using the 'proto=' option on another mountpoint. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
It isn't sufficient just to limit timeout->to_initval, we also need to limit to_maxval. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
In order to be able to support setting the timeo and retrans parameters on a per-mountpoint basis, we move the rpc_timeout structure into the rpc_clnt. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
There is no reason why we shouldn't just pass the rpc_create_args. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Now that the needed IPv6 infrastructure is in place, allow the NFS client's IP address parser to generate AF_INET6 addresses. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Replace the nfs_server and mount_server address fields in the nfs_parsed_mount_data structure with a "struct sockaddr_storage" instead of a "struct sockaddr_in". Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Refactor the logic to parse incoming text-based IP addresses. Use the in4_pton() function instead of the older in_aton(), following the lead of the in-kernel CIFS client. Later we'll add IPv6 address parsing using the matching in6_pton() function. For now we can't allow IPv6 address parsing: we must expand the size of the address storage fields in the nfs_parsed_mount_options struct before we can parse and store IPv6 addresses. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
In the name of address family compatibility, we can't have the NIP_FMT and NIPQUAD macros in nfs_try_mount(). Instead, we can make use of an unused mount option to display the mount server's hostname. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-