This patch adds V4L2 HVA (Hardware Video Accelerator) video encoder
driver for STMicroelectronics SoC. It uses the V4L2 mem2mem framework.

This patch only contains the core parts of the driver:
- the V4L2 interface with the userland (hva-v4l2.c)
- the hardware services (hva-hw.c)
- the memory management utilities (hva-mem.c)

This patch doesn't include the support of specific codec (e.g. H.264)
video encoding: this support is part of subsequent patches.
Signed-off-by: NYannick Fertre <yannick.fertre@st.com>
Signed-off-by: NJean-Christophe Trotin <jean-christophe.trotin@st.com>
Acked-by: NPeter Griffin <peter.griffin@linaro.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

There are several functions documented at the C file. Move
them to the header, as this is the one used to build the
media books.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

There are several functions that were documented at the .c
file. As we only include the headers, we need to move them to
there, in order to have documentation.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Several routines are somewhat documented at v4l2-mem2mem.c
file. Move what's there to the header file.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The kernel-doc parser didn't handle well the private:
tag. Rewrite it.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

demux.h was lacking documentation for the DMX_FE_ENTRY macro:
	./drivers/media/dvb-core/demux.h:511: WARNING: c:func reference target not found: DMX_FE_ENTRY

While here, get rid of unused parameters and fix a few minor issues
at the header file.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

There are a few define macros not documented, because the ReST
output was causing more warnings.

Now that this got fixed, document them. While here, fix the
remaining coding style issues.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Instead of keeping those notes at the file on a non-structured
way, move them to dtv-core.rst, using the proper ReST tags.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

There are several functions there there weren't properly
documented. Add documentation for them.

While here, make checkpatch.pl happier.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Update the cobalt EDID, fixing various incorrect values (wrong name,
product code, various video capabilities).
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Update the vivid EDID, fixing various incorrect values (wrong name,
product code, various video capabilities).
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

As warned by smatch:
	drivers/media/pci/tw5864/tw5864-core.c:160 tw5864_h264_isr() error: double lock 'irqsave:flags'
	drivers/media/pci/tw5864/tw5864-core.c:174 tw5864_h264_isr() error: double unlock 'irqsave:flags'

Two different spinlocks are obtained, so having two calls is correct,
but second irqsave is superfluous, and using same "flags" variable is
just wrong.
Reported-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: NAndrey Utkin <andrey.utkin@corp.bluecherry.net>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This reverts commit 617e901a ("[media] tw5864: remove double irq lock code").

That commit was rejected by Andrey Utkin <andrey_utkin@fastmail.com>,
but it had already been merged. Revert and apply Andrey's corrected
patch next.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Fix some small things:
    - clean up setup function
    - use MSGEND instead of 0xfe
    - don't assign "return value" from cec_phys_addr to err,
      it has return type void.
Signed-off-by: NJohan Fjeldtvedt <jaffe1@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Replace the 'IS_ERR_VALUE(irq)' with 'ret < 0' in
function 'atmel_isc_probe'.
Reported-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NSongjun Wu <songjun.wu@microchip.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This commit adds support for VIDIOC_ENUM_FRAMESIZES
and VIDIOC_ENUM_FRAMEINTERVALS enumeration ioctls.
Signed-off-by: NEzequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

When the configuration is changed, they are also written to the adapter.
This allows the adapter to continue operating in autonomous mode with
the same settings when it is disconnected from the driver (typically by
going into suspend). For adapters with firmware version 2 or greater, the
settings are also persisted in EEPROM.

A new module parameter is added to optionally also use the configuration
already present in the adapter when it is connected. This option is
enabled by default.

When a new configuration is written, the autonomous mode is
automatically enabled. When the device is unconfigured, autonomous mode
is disabled.
Signed-off-by: NJohan Fjeldtvedt <jaffe1@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The pulse8 dongle has some quirky behaviors when in autonomous mode.
Document these.
Signed-off-by: NJohan Fjeldtvedt <jaffe1@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Make sending messages to the adapter serialized within the driver.

send_and_wait is split into send_and_wait_once, which only sends once
and checks for the result, and the higher level send_and_wait, which
performs locking and retries.
Signed-off-by: NJohan Fjeldtvedt <jaffe1@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

It makes sense for adapters such as the Pulse-Eight to be configurable
both from within the driver and from user space, so remove the
requirement that drivers only can call cec_s_log_addrs or
cec_s_phys_addr if they don't expose those capabilities to user space.
Signed-off-by: NJohan Fjeldtvedt <jaffe1@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The field "owner" is set by core. Thus delete an extra initialisation.

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This patch add g/s_selection for MT8173 V4L2 Encoder.
Only output queue support g/s_selection to configure crop.
The top/left of active rectangle should always be (0,0)
Signed-off-by: NTiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The field "owner" is set by core. Thus delete an extra initialisation.

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The clock framework is generally so well supported that there's no reason
to keep this one around.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: NSebastian Reichel <sre@kernel.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Switch from the old gpio API to the new descriptor based gpiod API.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: NSebastian Reichel <sre@kernel.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The data may now be const as well.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: NSebastian Reichel <sre@kernel.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The clock may be provided by a driver which is yet to probe. Print the
actual error code as well.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: NSebastian Reichel <sre@kernel.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This is really configuration to the driver originating from DT or
elsewhere. Do not call it platform data.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: NSebastian Reichel <sre@kernel.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Unify enforced 8-bit read access with that based on actual need.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: NSebastian Reichel <sre@kernel.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Without this patch, a bug is issued when the module is removed:

[ 1417.425863] cx231xx 1-3.1.4:1.1: Cx231xx dvb Extension removed
[ 1417.571923] BUG: unable to handle kernel paging request at ffffffffc081a024
[ 1417.571962] IP: [<ffffffff813da854>] string+0x24/0x80
[ 1417.571987] PGD 1c09067 PUD 1c0b067 PMD 88e653067 PTE 0
[ 1417.572013] Oops: 0000 [#1] SMP
[ 1417.572026] Modules linked in: mb86a20s dvb_core cx231xx_alsa ir_kbd_i2c(-) tda18271 tea5767 tuner cx25840 cx231xx i2c_mux videobuf_vmalloc tveeprom cx2341x videobuf_core rc_core v4l2_common videodev media bnep usblp fuse xt_CHECKSUM iptable_mangle tun ebtable_filter ebtables ip6table_filter ip6_tables xt_physdev br_netfilter bridge nf_log_ipv4 nf_log_common xt_LOG xt_conntrack ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack cpufreq_stats vfat fat snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel snd_hda_intel snd_hda_codec kvm snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm irqbypass crct10dif_pclmul iTCO_wdt crc32_pclmul nfsd hci_uart iTCO_vendor_support
[ 1417.572317]  snd_timer ghash_clmulni_intel btbcm intel_cstate btqca snd intel_uncore btintel intel_rapl_perf mei_me bluetooth mei shpchp soundcore pcspkr i2c_i801 auth_rpcgss wmi acpi_als kfifo_buf nfs_acl industrialio rfkill lockd pinctrl_sunrisepoint pinctrl_intel tpm_tis tpm intel_lpss_acpi intel_lpss acpi_pad grace sunrpc binfmt_misc hid_logitech_hidpp hid_logitech_dj 8021q garp stp llc mrp i915 i2c_algo_bit drm_kms_helper drm e1000e sdhci_pci sdhci mmc_core crc32c_intel ptp pps_core video i2c_hid fjes analog gameport joydev [last unloaded: rc_pixelview_002t]
[ 1417.572487] CPU: 4 PID: 24493 Comm: rmmod Tainted: G        W       4.7.0+ #2
[ 1417.572504] Hardware name:                  /NUC6i7KYB, BIOS KYSKLi70.86A.0041.2016.0817.1130 08/17/2016
[ 1417.572526] task: ffff880894b81e80 ti: ffff880896bdc000 task.ti: ffff880896bdc000
[ 1417.572544] RIP: 0010:[<ffffffff813da854>]  [<ffffffff813da854>] string+0x24/0x80
[ 1417.572564] RSP: 0018:ffff880896bdfbe8  EFLAGS: 00010286
[ 1417.572577] RAX: ffffffffc081a025 RBX: ffff8808935aa15c RCX: ffff0a00ffffff04
[ 1417.572594] RDX: ffffffffc081a024 RSI: ffffffffffffffff RDI: ffff8808935aa15c
[ 1417.572610] RBP: ffff880896bdfbe8 R08: fffffffffffffffe R09: ffff8808935aa91c
[ 1417.572628] R10: ffffffffc07b85d6 R11: 0000000000000000 R12: ffff8808935aa91c
[ 1417.572644] R13: 00000000000007c5 R14: ffffffffc07b85dd R15: ffffffffc07b85dd
[ 1417.572662] FS:  00007f5a5392d700(0000) GS:ffff8808bed00000(0000) knlGS:0000000000000000
[ 1417.572681] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1417.572705] CR2: ffffffffc081a024 CR3: 0000000897188000 CR4: 00000000003406e0
[ 1417.572735] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1417.572761] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1417.572778] Stack:
[ 1417.572785]  ffff880896bdfc48 ffffffff813dcf77 0000000000000005 ffff8808935aa157
[ 1417.572806]  ffff880896bdfc58 ffff0a00ffffff04 000000009d27375e ffff8808935aa000
[ 1417.572829]  0000000000000800 ffff880896182800 0000000000000000 ffff88089e898ae0
[ 1417.572850] Call Trace:
[ 1417.572860]  [<ffffffff813dcf77>] vsnprintf+0x2d7/0x500
[ 1417.572873]  [<ffffffff813d3e12>] add_uevent_var+0x82/0x120
[ 1417.572890]  [<ffffffffc07b534d>] rc_dev_uevent+0x2d/0x60 [rc_core]
[ 1417.572907]  [<ffffffff81515969>] dev_uevent+0xd9/0x2d0
[ 1417.572921]  [<ffffffff813d4309>] kobject_uevent_env+0x2d9/0x4f0
[ 1417.572938]  [<ffffffff813d452b>] kobject_uevent+0xb/0x10
[ 1417.572954]  [<ffffffff81513a3f>] device_del+0x18f/0x260
[ 1417.572974]  [<ffffffff813d2db7>] ? kobject_put+0x27/0x50
[ 1417.572998]  [<ffffffffc07b5e25>] rc_unregister_device+0x75/0xb0 [rc_core]
[ 1417.573028]  [<ffffffffc07e6023>] ir_remove+0x23/0x30 [ir_kbd_i2c]
[ 1417.573055]  [<ffffffff8162bf88>] i2c_device_remove+0x58/0xb0
[ 1417.573078]  [<ffffffff81518191>] __device_release_driver+0xa1/0x160
[ 1417.573102]  [<ffffffff81518de6>] driver_detach+0xa6/0xb0
[ 1417.573122]  [<ffffffff81517b25>] bus_remove_driver+0x55/0xd0
[ 1417.573146]  [<ffffffff815195bc>] driver_unregister+0x2c/0x50
[ 1417.573168]  [<ffffffff8162cf62>] i2c_del_driver+0x22/0x50
[ 1417.573194]  [<ffffffffc07e6ba4>] ir_kbd_driver_exit+0x10/0x46c [ir_kbd_i2c]
[ 1417.573227]  [<ffffffff81126348>] SyS_delete_module+0x1b8/0x220
[ 1417.573254]  [<ffffffff817debf2>] entry_SYSCALL_64_fastpath+0x1a/0xa4
[ 1417.573279] Code: eb e9 76 ff ff ff 90 55 49 89 f1 48 89 ce 48 c1 fe 30 48 81 fa ff 0f 00 00 48 89 e5 4c 8d 46 ff 76 40 48 85 f6 74 4e 48 8d 42 01 <0f> b6 12 84 d2 74 43 49 01 c0 31 f6 eb 0c 48 83 c0 01 0f b6 50
[ 1417.573437] RIP  [<ffffffff813da854>] string+0x24/0x80
[ 1417.573455]  RSP <ffff880896bdfbe8>
[ 1417.573465] CR2: ffffffffc081a024
[ 1417.580053] ---[ end trace 4ca9e2eced326a62 ]---
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The driver should not ignore errors while registering the I2C
bus, as this device can't even minimally work without the buses,
as it uses those buses internally to talk with the several IP
blocks inside the chip.

Cc: stable@vger.kernel.org
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The cx231xx_get_i2c_adap() function should return the I2C
adapter that will be used to talk with a device. It should never
be NULL, as otherwise the driver will try to dereference a
null pointer.

We might instead fix the callers, but if this condition
ever happens, it is really a driver bug, because i2c_port
should always be a value from enum CX231XX_I2C_MASTER_PORT.

Found when checking the code due to this bug:

[   39.769021] BUG: unable to handle kernel NULL pointer dereference at 0000000000000002
[   39.769105] IP: [<ffffffff81638393>] i2c_master_send+0x13/0x70
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The number of the cx231xx REQ for GPIO register set/get are wrong.
They should follow what's there at cx231xx-pcb-cfg.h.

Noticed while checking the cx231xx parser at the v4l-utils.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

If something bad happens when switching between digital
and analog mode, prints an error and outputs the returned code.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This device uses GPIOs: 28 to switch between analog and
digital modes: on digital mode, it should be set to 1.

The code that sets it on analog mode is OK, but it misses
the logic that sets it on digital mode.

Cc: stable@vger.kernel.org
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The cx231xx_set_agc_analog_digital_mux_select() callers
expect it to return 0 or an error. Returning a positive value
makes the first attempt to switch between analog/digital to fail.

Cc: stable@vger.kernel.org
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

With the current settings, only one channel locks properly.
That's likely because, when this driver was written, Brazil
were still using experimental transmissions.

Change it to reproduce the settings used by the newer drivers.
That makes it lock on other channels.

Tested with both PixelView SBTVD Hybrid (cx231xx-based) and
C3Tech Digital Duo HDTV/SDTV (em28xx-based) devices.

Cc: stable@vger.kernel.org
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

On this frontend, it takes a while to start output normal
TS data. That only happens on state S9. On S8, the TS output
is enabled, but it is not reliable enough.

However, the zigzag loop is too fast to let it sync.

As, on practical tests, the zigzag software loop doesn't
seem to be helping, but just slowing down the tuning, let's
switch to hardware algorithm, as the tuners used on such
devices are capable of work with frequency drifts without
any help from software.

Cc: stable@vger.kernel.org
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

use pr_fmt() & friends for error messages to output like:

[    9.651721] tea5767: Chip ID is not zero. It is not a TEA5767
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Some messages have a hardcoded prefix; others not. Use the
pr_fmt() to ensure that all messages will use the same prefix.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>