Several different functions in turbostat contain the same pattern of
opening a file and exiting on failure.  Factor out a common fopen_or_die
function for that.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

Many different chunks of code in turbostat open a file, parse a single
int out of it, and close it.  Factor that out into a common function.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

Some systems declare fscanf with the warn_unused_result attribute.  On
such systems, turbostat generates the following warnings:

turbostat.c: In function 'get_core_id':
turbostat.c:1203:8: warning: ignoring return value of 'fscanf', declared with attribute warn_unused_result [-Wunused-result]
turbostat.c: In function 'get_physical_package_id':
turbostat.c:1186:8: warning: ignoring return value of 'fscanf', declared with attribute warn_unused_result [-Wunused-result]
turbostat.c: In function 'cpu_is_first_core_in_package':
turbostat.c:1169:8: warning: ignoring return value of 'fscanf', declared with attribute warn_unused_result [-Wunused-result]
turbostat.c: In function 'cpu_is_first_sibling_in_core':
turbostat.c:1148:8: warning: ignoring return value of 'fscanf', declared with attribute warn_unused_result [-Wunused-result]

Fix these by checking the return value of those four calls to fscanf.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

turbostat uses inline assembly to call cpuid.  On 32-bit x86, on systems
that have certain security features enabled by default that make -fPIC
the default, this causes a build error:

turbostat.c: In function ‘check_cpuid’:
turbostat.c:1906:2: error: PIC register clobbered by ‘ebx’ in ‘asm’
  asm("cpuid" : "=a" (fms), "=c" (ecx), "=d" (edx) : "a" (1) : "ebx");
  ^

GCC provides a header cpuid.h, containing a __get_cpuid function that
works with both PIC and non-PIC.  (On PIC, it saves and restores ebx
around the cpuid instruction.)  Use that instead.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>
Cc: stable@vger.kernel.org
Signed-off-by: NLen Brown <len.brown@intel.com>

turbostat uses the format %zx to print an off_t.  However, %zx wants a
size_t, not an off_t.  On 32-bit targets, those refer to different
types, potentially even with different sizes.  Use %llx and a cast
instead, since printf does not have a length modifier for off_t.

Without this patch, when compiling for a 32-bit target:

turbostat.c: In function 'get_msr':
turbostat.c:231:3: warning: format '%zx' expects argument of type 'size_t', but argument 4 has type 'off_t' [-Wformat]
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

turbostat's Makefile puts arch/x86/include/uapi/ in the include path, so
that it can include <asm/msr.h> from it.  It isn't in general safe to
include even uapi headers directly from the kernel tree without
processing them through scripts/headers_install.sh, but asm/msr.h
happens to work.

However, that include path can break with some versions of system
headers, by overriding some system headers with the unprocessed versions
directly from the kernel source.  For instance:

In file included from /build/x86-generic/usr/include/bits/sigcontext.h:28:0,
                 from /build/x86-generic/usr/include/signal.h:339,
                 from /build/x86-generic/usr/include/sys/wait.h:31,
                 from turbostat.c:27:
../../../../arch/x86/include/uapi/asm/sigcontext.h:4:28: fatal error: linux/compiler.h: No such file or directory

This occurs because the system bits/sigcontext.h on that build system
includes <asm/sigcontext.h>, and asm/sigcontext.h in the kernel source
includes <linux/compiler.h>, which scripts/headers_install.sh would have
filtered out.

Since turbostat really only wants a single header, just include that one
header rather than putting an entire directory of kernel headers on the
include path.

In the process, switch from msr.h to msr-index.h, since turbostat just
wants the MSR numbers.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>
Cc: stable@vger.kernel.org
Signed-off-by: NLen Brown <len.brown@intel.com>

Support the next generation Intel Atom processor
mirco-architecture, formerly called Silvermont.

The server version, formerly called "Avoton",
is named the "Intel(R) Atom(TM) Processor C2000 Product Family".

The client version, formerly called "Bay Trail",
is named the "Intel Atom Processor Z3000 Series",
as well as various "Intel Pentium Processor"
and "Intel Celeron Processor" brands, depending
on form-factor.

Silvermont has a set of MSRs not far off from NHM,
but the RAPL register set is a sub-set of those previously supported.
Signed-off-by: NLen Brown <len.brown@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

On platforms with C8-C10 support, the additional C-states cause
turbostat to overrun its output buffer of 128 bytes per CPU.  Increase
this to 256 bytes per CPU.

[ As a bugfix, this should go into 3.10; however, since the C8-C10
  support didn't go in until after 3.9, this need not go into any stable
  kernel. ]
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Display residency in the new C-states, C8, C9, C10.

C8, C9, C10 are present on some:
"Fourth Generation Intel(R) Core(TM) Processors",
which are based on Intel(R) microarchitecture code name Haswell.
Signed-off-by: NKristen Carlson Accardi <kristen@linux.intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

There is an additional HSW CPU-id, 0x46,
which has C-states exactly like CPU-id 0x45.
Signed-off-by: NLen Brown <len.brown@intel.com>

The SMI counter is popular -- so display it by default
rather than requiring an option.  What the heck,
we've blown the 80 column budget on many systems already...

Note that the value displayed is the delta
during the measurement interval.
The absolute value of the counter can still be seen with
the generic 32-bit MSR option, ie.  -m 0x34
Signed-off-by: NLen Brown <len.brown@intel.com>

When verbose is enabled, print the C1E-Enable
bit in MSR_IA32_POWER_CTL.

also delete some redundant tests on the verbose variable.
Signed-off-by: NLen Brown <len.brown@intel.com>

This patch enables turbostat to run properly on the
next-generation Intel(R) Microarchitecture, code named "Haswell" (HSW).

HSW supports the BCLK and counters found in SNB.
Signed-off-by: NLen Brown <len.brown@intel.com>

Show power in Watts and temperature in Celsius
when hardware support is present.

Intel's Sandy Bridge and Ivy Bridge processor generations support RAPL
(Run-Time-Average-Power-Limiting).  Per the Intel SDM
(Intel® 64 and IA-32 Architectures Software Developer Manual)
RAPL provides hardware energy counters and power control MSRs
(Model Specific Registers).  RAPL MSRs are designed primarily
as a method to implement power capping.  However, they are useful
for monitoring system power whether or not power capping is used.

In addition, Turbostat now shows temperature from DTS
(Digital Thermal Sensor) and PTM (Package Thermal Monitor) hardware,
if present.

As before, turbostat reads MSRs, and never writes MSRs.

New columns are present in turbostat output:

The Pkg_W column shows Watts for each package (socket) in the system.
On multi-socket systems, the system summary on the 1st row shows the sum
for all sockets together.

The Cor_W column shows Watts due to processors cores.
Note that Core_W is included in Pkg_W.

The optional GFX_W column shows Watts due to the graphics "un-core".
Note that GFX_W is included in Pkg_W.

The optional RAM_W column on server processors shows Watts due to DRAM DIMMS.
As DRAM DIMMs are outside the processor package, RAM_W is not included in Pkg_W.

The optional PKG_% and RAM_% columns on server processors shows the % of time
in the measurement interval that RAPL power limiting is in effect on the
package and on DRAM.

Note that the RAPL energy counters have some limitations.

First, hardware updates the counters about once every milli-second.
This is fine for typical turbostat measurement intervals > 1 sec.
However, when turbostat is used to measure events that approach
1ms, the counters are less useful.

Second, the 32-bit energy counters are subject to wrapping.
For example, a counter incrementing 15 micro-Joule units
on a 130 Watt TDP server processor could (in theory)
roll over in about 9 minutes.  Turbostat detects and handles
up to 1 counter overflow per measurement interval.
But when the measurement interval exceeds the guaranteed
counter range, we can't detect if more than 1 overflow occured.
So in this case turbostat indicates that the results are
in question by replacing the fractional part of the Watts
in the output with "**":

Pkg_W  Cor_W GFX_W
  3**    0**   0**

Third, the RAPL counters are energy (Joule) counters -- they sum up
weighted events in the package to estimate energy consumed.  They are
not analong power (Watt) meters.  In practice, they tend to under-count
because they don't cover every possible use of energy in the package.
The accuracy of the RAPL counters will vary between product generations,
and between SKU's in the same product generation, and with temperature.

turbostat's -v (verbose) option now displays more power and thermal configuration
information -- as shown on the turbostat.8 manual page.
For example, it now displays the Package and DRAM Thermal Design Power (TDP):

cpu0: MSR_PKG_POWER_INFO: 0x2f064001980410 (130 W TDP, RAPL 51 - 200 W, 0.045898 sec.)
cpu0: MSR_DRAM_POWER_INFO,: 0x28025800780118 (35 W TDP, RAPL 15 - 75 W, 0.039062 sec.)
cpu8: MSR_PKG_POWER_INFO: 0x2f064001980410 (130 W TDP, RAPL 51 - 200 W, 0.045898 sec.)
cpu8: MSR_DRAM_POWER_INFO,: 0x28025800780118 (35 W TDP, RAPL 15 - 75 W, 0.039062 sec.)
Signed-off-by: NLen Brown <len.brown@intel.com>

In periodic mode, turbostat writes to stdout,
but users were un-able to re-direct stdout, eg.

turbostat > outputfile

would result in an empty outputfile.
Signed-off-by: NLen Brown <len.brown@intel.com>

Turbostat assumed if it can't migrate to a CPU, then the CPU
must have gone off-line and turbostat should re-initialize
with the new topology.

But if turbostat can not migrate because it is restricted by
a cpuset, then it will fail to migrate even after re-initialization,
resulting in an infinite loop.

Spit out a warning when we can't migrate
and endure only 2 re-initialize cycles in a row
before giving up and exiting.
Signed-off-by: NLen Brown <len.brown@intel.com>

Now that turbostat is built in the kernel tree,
it can share MSR #defines with the kernel.
Signed-off-by: NLen Brown <len.brown@intel.com>
Cc: x86@kernel.org

When invald MSR's are specified on the command line,
turbostat should simply print an error and exit.
Signed-off-by: NLen Brown <len.brown@intel.com>

Fix regression caused by commit 8e180f3c
(tools/power turbostat: add [-d MSR#][-D MSR#] options to print counter
deltas)
Signed-off-by: NLen Brown <len.brown@intel.com>

Counting SMIs is popular, so add a dedicated "-s" option to do it,
and juggle some of the other option letters.

-S is now system summary (was -s)
-c is 32 bit counter (was -d)
-C is 64-bit counter (was -D)
-p is 1st thread in core (was -c)
-P is 1st thread in package (was -p)

bump the minor version number
Signed-off-by: NLen Brown <len.brown@intel.com>

 # turbostat -d 0x34
is useful for printing the number of SMI's within an interval
on Nehalem and newer processors.

where
 # turbostat -m 0x34
will simply print out the total SMI count since reset.

Suggested-by: Andi Kleen
Signed-off-by: NLen Brown <len.brown@intel.com>

-m MSR# prints the specified MSR in 32-bit format
-M MSR# prints the specified MSR in 64-bit format
Signed-off-by: NLen Brown <len.brown@intel.com>

The -M option dumps the specified 64-bit MSR with every sample.

Previously it was output at the end of each line.
However, with the v2 style of printing, the lines are now staggered,
making MSR output hard to read.

So move the MSR output column to the left where things are aligned.
Signed-off-by: NLen Brown <len.brown@intel.com>

The "turbo-limit" is the maximum opportunistic processor
speed, assuming no electrical or thermal constraints.
For a given processor, the turbo-limit varies, depending
on the number of active cores.  Generally, there is more
opportunity when fewer cores are active.

Under the "-v" verbose option, turbostat would
print the turbo-limits for the four cases
of 1 to 4 cores active.

Expand that capability to cover the cases of turbo
opportunities with up to 16 cores active.

Note that not all hardware platforms supply this information,
and that sometimes a valid limit may be specified for
a core which is not actually present.
Signed-off-by: NLen Brown <len.brown@intel.com>

MSR_TSC is no longer needed because
we now use RDTSC directly.
Signed-off-by: NLen Brown <len.brown@intel.com>

This fix is required to run on IVB Xeon,
which previously had an incorrect cpuid model number listed.
Signed-off-by: NLen Brown <len.brown@intel.com>

Under some conditions, c1% was displayed as very large number,
much higher than 100%.

c1% is not measured, it is derived as "that, which is left over"
from other counters.  However, the other counters are not collected
atomically, and so it is possible for c1% to be calaculagted as
a small negative number -- displayed as very large positive.

There was a check for mperf vs tsc for this already,
but it needed to also include the other counters
that are used to calculate c1.
Signed-off-by: NLen Brown <len.brown@intel.com>

Measuring large profoundly-idle configurations
requires turbostat to be more lightweight.
Otherwise, the operation of turbostat itself
can interfere with the measurements.

This re-write makes turbostat topology aware.
Hardware is accessed in "topology order".
Redundant hardware accesses are deleted.
Redundant output is deleted.
Also, output is buffered and
local RDTSC use replaces remote MSR access for TSC.

From a feature point of view, the output
looks different since redundant figures are absent.
Also, there are now -c and -p options -- to restrict
output to the 1st thread in each core, and the 1st
thread in each package, respectively.  This is helpful
to reduce output on big systems, where more detail
than the "-s" system summary is desired.
Finally, periodic mode output is now on stdout, not stderr.

Turbostat v2 is also slightly more robust in
handling run-time CPU online/offline events,
as it now checks the actual map of on-line cpus rather
than just the total number of on-line cpus.
Signed-off-by: NLen Brown <len.brown@intel.com>

Initial IVB support went into turbostat in Linux-3.1:
553575f1
(tools turbostat: recognize and run properly on IVB)

However, when running on IVB, turbostat would fail
to report the new couters added with SNB, c7, pc2 and pc7.
So in scenarios where these counters are non-zero on IVB,
turbostat would report erroneous residencey results.

In particular c7 time would be added to c1 time,
since c1 time is calculated as "that which is left over".

Also, turbostat reports MHz capabilities when passed
the "-v" option, and it would incorrectly report 133MHz
bclk instead of 100MHz bclk for IVB, which would inflate
GHz reported with that option.

This patch is a backport of a fix already included in turbostat v2.
Signed-off-by: NLen Brown <len.brown@intel.com>

Linux 3.4 included a modification to turbostat to
lower cross-call overhead by using scheduler affinity:

15aaa346
(tools turbostat: reduce measurement overhead due to IPIs)

In the use-case where turbostat forks a child program,
that change had the un-intended side-effect of binding
the child to the last cpu in the system.

This change removed the binding before forking the child.

This is a back-port of a fix already included in turbostat v2.
Signed-off-by: NLen Brown <len.brown@intel.com>

Sometimes users have turbostat running in interval mode
when they take processors offline/online.

Previously, turbostat would survive, but not gracefully.

Tighten up the error checking so turbostat notices
changesn sooner, and print just 1 line on change:

turbostat: re-initialized with num_cpus %d
Signed-off-by: NLen Brown <len.brown@intel.com>

turbostat uses /dev/cpu/*/msr interface to read MSRs.
For modern systems, it reads 10 MSR/CPU.  This can
be observed as 10 "Function Call Interrupts"
per CPU per sample added to /proc/interrupts.

This overhead is measurable on large idle systems,
and as Yoquan Song pointed out, it can even trick
cpuidle into thinking the system is busy.

Here turbostat re-schedules itself in-turn to each
CPU so that its MSR reads will always be local.
This replaces the 10 "Function Call Interrupts"
with a single "Rescheduling interrupt" per sample
per CPU.

On an idle 32-CPU system, this shifts some residency from
the shallow c1 state to the deeper c7 state:

 # ./turbostat.old -s
   %c0  GHz  TSC    %c1    %c3    %c6    %c7   %pc2   %pc3   %pc6   %pc7
  0.27 1.29 2.29   0.95   0.02   0.00  98.77  20.23   0.00  77.41   0.00
  0.25 1.24 2.29   0.98   0.02   0.00  98.75  20.34   0.03  77.74   0.00
  0.27 1.22 2.29   0.54   0.00   0.00  99.18  20.64   0.00  77.70   0.00
  0.26 1.22 2.29   1.22   0.00   0.00  98.52  20.22   0.00  77.74   0.00
  0.26 1.38 2.29   0.78   0.02   0.00  98.95  20.51   0.05  77.56   0.00
^C
 i# ./turbostat.new -s
   %c0  GHz  TSC    %c1    %c3    %c6    %c7   %pc2   %pc3   %pc6   %pc7
  0.27 1.20 2.29   0.24   0.01   0.00  99.49  20.58   0.00  78.20   0.00
  0.27 1.22 2.29   0.25   0.00   0.00  99.48  20.79   0.00  77.85   0.00
  0.27 1.20 2.29   0.25   0.02   0.00  99.46  20.71   0.03  77.89   0.00
  0.28 1.26 2.29   0.25   0.01   0.00  99.46  20.89   0.02  77.67   0.00
  0.27 1.20 2.29   0.24   0.01   0.00  99.48  20.65   0.00  78.04   0.00

cc: Youquan Song <youquan.song@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

turbostat -s
cuts down on the amount of output, per user request.

also treak some output whitespace and the man page.
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NLen Brown <len.brown@intel.com>

Reduce columns for package number to 1.
If you can afford more than 9 packages,
you can also afford a terminal with more than 80 columns:-)

Also shave a column also off the package C-states
Signed-off-by: NLen Brown <len.brown@intel.com>

dump only the counters which are active
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Follow kernel coding style traditions more closely.
Delete typedef, re-name "per cpu counters" to
simply be counters etc.

This patch changes no functionality.
Suggested-by: NThiago Farina <tfransosi@gmail.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

bug could cause false positive on indicating
presence of invarient TSC or APERF support.
Signed-off-by: NThomas Renninger <trenn@suse.de>
Signed-off-by: NLen Brown <len.brown@intel.com>

turbostat is a Linux tool to observe proper operation
of Intel(R) Turbo Boost Technology.

turbostat displays the actual processor frequency
on x86 processors that include APERF and MPERF MSRs.

Note that turbostat is of limited utility on Linux
kernels 2.6.29 and older, as acpi_cpufreq cleared
APERF/MPERF up through that release.

On Intel Core i3/i5/i7 (Nehalem) and newer processors,
turbostat also displays residency in idle power saving states,
which are necessary for diagnosing any cpuidle issues
that may have an effect on turbo-mode.

See the turbostat.8 man page for example usage.
Signed-off-by: NLen Brown <len.brown@intel.com>