Add __init attribution to the functions which are called only once
during initiating/registering operations and deleting unnecessary
symbol exports.
Signed-off-by: NChengguang Xu <cgxu519@gmx.com>
Reviewed-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Remove write permission for debugfs entries which only have readonly
function.
Signed-off-by: NChengguang Xu <cgxu519@icloud.com>
Reviewed-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

pg_temp and pg_upmap encodings are the same (PG -> array of osds),
except for the incremental remove: it's an empty mapping in new_pg_temp
for pg_temp and a separate old_pg_upmap set for pg_upmap.  (This isn't
to allow for empty pg_upmap mappings -- apparently, pg_temp just wasn't
looked at as an example for pg_upmap encoding.)

Reuse __decode_pg_temp() for decoding pg_upmap and new_pg_upmap.
__decode_pg_temp() stores into pg_temp union member, but since pg_upmap
union member is identical, reading through pg_upmap later is OK.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Otherwise we may miss events like PG splits, pool deletions, etc when
we get multiple incremental maps at once.  Because check_pool_dne() can
now be fed an unlinked request, finish_request() needed to be taught to
handle unlinked requests.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Store both raw pgid and actual spgid in ceph_osd_request_target.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Cephfs can get cap update requests that contain a new epoch barrier in
them. When that happens we want to pause all OSD traffic until the right
map epoch arrives.

Add an epoch_barrier field to ceph_osd_client that is protected by the
osdc->lock rwsem. When the barrier is set, and the current OSD map
epoch is below that, pause the request target when submitting the
request or when revisiting it. Add a way for upper layers (cephfs)
to update the epoch_barrier as well.

If we get a new map, compare the new epoch against the barrier before
kicking requests and request another map if the map epoch is still lower
than the one we want.

If we get a map with a full pool, or at quota condition, then set the
barrier to the current epoch value.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Reviewed-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Nothing uses this anymore with the removal of the ack vs. commit code.
Remove the field and just encode zeroes into place in the request
encoding.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Reviewed-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Add pool namesapce pointer to struct ceph_file_layout and struct
ceph_object_locator. Pool namespace is used by when mapping object
to PG, it's also used when composing OSD request.

The namespace pointer in struct ceph_file_layout is RCU protected.
So libceph can read namespace without taking lock.
Signed-off-by: NYan, Zheng <zyan@redhat.com>
[idryomov@gmail.com: ceph_oloc_destroy(), misc minor changes]
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

There is now about a dozen CEPH_OSDMAP_* flags.  This is a debugging
interface, so just dump in hex instead of spelling each flag out.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Implement ceph_osdc_notify() for sending notifies.

Due to the fact that the current messenger can't do read-in into
pagelists (it can only do write-out from them), I had to go with a page
vector for a NOTIFY_COMPLETE payload, for now.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

This adds support and switches rbd to a new, more reliable version of
watch/notify protocol.  As with the OSD client update, this is mostly
about getting the right structures linked into the right places so that
reconnects are properly sent when needed.  watch/notify v2 also
requires sending regular pings to the OSDs - send_linger_ping().

A major change from the old watch/notify implementation is the
introduction of ceph_osd_linger_request - linger requests no longer
piggy back on ceph_osd_request.  ceph_osd_event has been merged into
ceph_osd_linger_request.

All the details are now hidden within libceph, the interface consists
of a simple pair of watch/unwatch functions and ceph_osdc_notify_ack().
ceph_osdc_watch() does return ceph_osd_linger_request, but only to keep
the lifetime management simple.

ceph_osdc_notify_ack() accepts an optional data payload, which is
relayed back to the notifier.

Portions of this patch are loosely based on work by Douglas Fuller
<dfuller@redhat.com> and Mike Christie <michaelc@cs.wisc.edu>.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

This is a major sync up, up to ~Jewel.  The highlights are:

- per-session request trees (vs a global per-client tree)
- per-session locking (vs a global per-client rwlock)
- homeless OSD session
- no ad-hoc global per-client lists
- support for pool quotas
- foundation for watch/notify v2 support
- foundation for map check (pool deletion detection) support

The switchover is incomplete: lingering requests can be setup and
teared down but aren't ever reestablished.  This functionality is
restored with the introduction of the new lingering infrastructure
(ceph_osd_linger_request, linger_work, etc) in a later commit.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

The crux of this is getting rid of ceph_osdc_build_request(), so that
MOSDOp can be encoded not before but after calc_target() calculates the
actual target.  Encoding now happens within ceph_osdc_start_request().

Also nuked is the accompanying bunch of pointers into the encoded
buffer that was used to update fields on each send - instead, the
entire front is re-encoded.  If we want to support target->name_len !=
base->name_len in the future, there is no other way, because oid is
surrounded by other fields in the encoded buffer.

Encoding OSD ops and adding data items to the request message were
mixed together in osd_req_encode_op().  While we want to re-encode OSD
ops, we don't want to add duplicate data items to the message when
resending, so all call to ceph_osdc_msg_data_add() are factored out
into a new setup_request_data().
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Replace __calc_request_pg() and most of __map_request() with
calc_target() and start using req->r_t.

ceph_osdc_build_request() however still encodes base_oid, because it's
called before calc_target() is and target_oid is empty at that point in
time; a printf in osdc_show() also shows base_oid.  This is fixed in
"libceph: switch to calc_target(), part 2".
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Add and decode pi->min_size and pi->last_force_request_resend.  These
are going to be used by calc_target().
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Currently ceph_object_id can hold object names of up to 100
(CEPH_MAX_OID_NAME_LEN) characters.  This is enough for all use cases,
expect one - long rbd image names:

- a format 1 header is named "<imgname>.rbd"
- an object that points to a format 2 header is named "rbd_id.<imgname>"

We operate on these potentially long-named objects during rbd map, and,
for format 1 images, during header refresh.  (A format 2 header name is
a small system-generated string.)

Lift this 100 character limit by making ceph_object_id be able to point
to an externally-allocated string.  Apart from being able to work with
almost arbitrarily-long named objects, this allows us to reduce the
size of ceph_object_id from >100 bytes to 64 bytes.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

It is currently hard-coded in the mon_client that mdsmap and monmap
subs are continuous, while osdmap sub is always "onetime".  To better
handle full clusters/pools in the osd_client, we need to be able to
issue continuous osdmap subs.  Revamp subs code to allow us to specify
for each sub whether it should be continuous or not.

Although not strictly required for the above, switch to SUBSCRIBE2
protocol while at it, eliminating the ambiguity between a request for
"every map since X" and a request for "just the latest" when we don't
have a map yet (i.e. have epoch 0).  SUBSCRIBE2 feature bit is now
required - it's been supported since pre-argonaut (2010).

Move "got mdsmap" call to the end of ceph_mdsc_handle_map() - calling
in before we validate the epoch and successfully install the new map
can mess up mon_client sub state.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Add a client_options attribute for showing libceph options.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

On Mon, Dec 22, 2014 at 5:35 PM, Sage Weil <sage@newdream.net> wrote:
> On Mon, 22 Dec 2014, Ilya Dryomov wrote:
>> Actually, pool op stuff has been unused for over two years - looks like
>> it was added for rbd create_snap and that got ripped out in 2012.  It's
>> unlikely we'd ever need to manage pools or snaps from the kernel client
>> so I think it makes sense to nuke it.  Sage?
>
> Yep!
Signed-off-by: NIlya Dryomov <idryomov@redhat.com>

For requests with multiple ops, separate ops with commas instead of \t,
which is a field separator here.
Signed-off-by: NIlya Dryomov <idryomov@redhat.com>
Reviewed-by: NSage Weil <sage@redhat.com>

Add support for mon_get_version requests to libceph.  This reuses much
of the ceph_mon_generic_request infrastructure, with one exception.
Older OSDs don't set mon_get_version reply hdr->tid even if the
original request had a non-zero tid, which makes it impossible to
lookup ceph_mon_generic_request contexts by tid in get_generic_reply()
for such replies.  As a workaround, we allocate a reply message on the
reply path.  This can probably interfere with revoke, but I don't see
a better way.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Recognize poolop requests in debugfs monc dump, fix prink format
specifiers - tid is unsigned.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Dump pool {read,write}_tier to debugfs.  While at it, fixup printk type
specifiers and remove the unnecessary cast to unsigned long long.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>

Add primary_affinity infrastructure.  primary_affinity values are
stored in an max_osd-sized array, hanging off ceph_osdmap, similar to
a osd_weight array.

Introduce {get,set}_primary_affinity() helpers, primarily to return
CEPH_OSD_DEFAULT_PRIMARY_AFFINITY when no affinity has been set and to
abstract out osd_primary_affinity array allocation and initialization.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

Add primary_temp mappings infrastructure.  struct ceph_pg_mapping is
overloaded, primary_temp mappings are stored in an rb-tree, rooted at
ceph_osdmap, in a manner similar to pg_temp mappings.

Dump primary_temp mappings to /sys/kernel/debug/ceph/<client>/osdmap,
one 'primary_temp <pgid> <osd>' per line, e.g:

    primary_temp 2.6 4
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

In preparation for adding support for primary_temp mappings, generalize
struct ceph_pg_mapping so it can hold mappings other than pg_temp.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

Dump pg_temp mappings to /sys/kernel/debug/ceph/<client>/osdmap,
one 'pg_temp <pgid> [<osd>, ..., <osd>]' per line, e.g:

    pg_temp 2.6 [2,3,4]
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

To save screen space in anticipation of more fields (e.g. primary
affinity).
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

To make it more readable and save screen space.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

Rename ceph_osd_request::r_{oloc,oid} to r_base_{oloc,oid} before
introducing r_target_{oloc,oid} needed for redirects.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

In preparation for tiering support, which would require having two
(base and target) object names for each osd request and also copying
those names around, introduce struct ceph_object_id (oid) and a couple
helpers to facilitate those copies and encapsulate the fact that object
name is not necessarily a NUL-terminated string.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

An osd request keeps a pointer to the osd operations (ops) array
that it builds in its request message.

In order to allow each op in the array to have its own distinct
data, we will need to keep track of each op's data, and that
information does not go over the wire.

As long as we're tracking the data we might as well just track the
entire (source) op definition for each of the ops.  And if we're
doing that, we'll have no more need to keep a pointer to the
wire-encoded version.

This patch makes the array of source ops be kept with the osd
request structure, and uses that instead of the version encoded in
the message in places where that was previously used.  The array
will be embedded in the request structure, and the maximum number of
ops we ever actually use is currently 2.  So reduce CEPH_OSD_MAX_OP
to 2 to reduce the size of the structure.

The result of doing this sort of ripples back up, and as a result
various function parameters and local variables become unnecessary.

Make r_num_ops be unsigned, and move the definition of struct
ceph_osd_req_op earlier to ensure it's defined where needed.

It does not yet add per-op data, that's coming soon.

This resolves:
    http://tracker.ceph.com/issues/4656Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Use the new version of the encoding for osd requests and replies.  In the
process, update the way we are tracking request ops and reply lengths and
results in the struct ceph_osd_request.  Update the rbd and fs/ceph users
appropriately.

The main changes are:
 - we keep pointers into the request memory for fields we need to update
   each time the request is sent out over the wire
 - we keep information about the result in an array in the request struct
   where the users can easily get at it.
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

Support (and require) the PGID64, PGPOOL3, and OSDENC protocol features.
These have been present in ceph.git since v0.42, Feb 2012.  Require these
features to simplify support; nobody is running older userspace.

Note that the new request and reply encoding is still not in place, so the new
code is not yet functional.
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

Always decode data into our cpu-native ceph_pg type that has the correct
field widths.  Limit any remaining uses of ceph_pg_v1 to dealing with the
legacy protocol.
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

The debugfs directory includes the cluster fsid and our unique global_id.
We need to delay the initialization of the debug entry until we have
learned both the fsid and our global_id from the monitor or else the
second client can't create its debugfs entry and will fail (and multiple
client instances aren't properly reflected in debugfs).

Reported by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NYehuda Sadeh <yehuda@inktank.com>