A BPF program is required to check the return register of a
map_elem_lookup() call before accessing memory. The verifier keeps
track of this by converting the type of the result register from
PTR_TO_MAP_VALUE_OR_NULL to PTR_TO_MAP_VALUE after a conditional
jump ensures safety. This check is currently exclusively performed
for the result register 0.

In the event the compiler reorders instructions, BPF_MOV64_REG
instructions may be moved before the conditional jump which causes
them to keep their type PTR_TO_MAP_VALUE_OR_NULL to which the
verifier objects when the register is accessed:

0: (b7) r1 = 10
1: (7b) *(u64 *)(r10 -8) = r1
2: (bf) r2 = r10
3: (07) r2 += -8
4: (18) r1 = 0x59c00000
6: (85) call 1
7: (bf) r4 = r0
8: (15) if r0 == 0x0 goto pc+1
 R0=map_value(ks=8,vs=8) R4=map_value_or_null(ks=8,vs=8) R10=fp
9: (7a) *(u64 *)(r4 +0) = 0
R4 invalid mem access 'map_value_or_null'

This commit extends the verifier to keep track of all identical
PTR_TO_MAP_VALUE_OR_NULL registers after a map_elem_lookup() by
assigning them an ID and then marking them all when the conditional
jump is observed.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Reviewed-by: NJosef Bacik <jbacik@fb.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of using a private copy of struct net_device_stats in struct
fs_enet_private, use stats from struct net_device. Also remove the now
unnecessary .ndo_get_stats function.
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The memory return by kzalloc() has already be set to zero, so
remove useless memset(0).
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes the following sparse warning:

drivers/net/dsa/mv88e6xxx/chip.c:2866:5: warning:
 symbol 'mv88e6xxx_g1_set_switch_mac' was not declared. Should it be static?
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add the following four products of Lenovo and sort the order of the list.

	VID		PID
	0x17ef		0x3062
	0x17ef		0x3069
	0x17ef		0x720c
	0x17ef		0x7214
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use sizeof variable instead of literal number to enhance the readability.
Signed-off-by: NGao Feng <fgao@ikuai8.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Robert Jarzmik says:

====================
support smc91x on mainstone and devicetree

This series aims at bringing support to mainstone board on a
device-tree based build, as what is already in place for legacy
mainstone.

The bulk of the mainstone "specific" behavior is that a u16 write
doesn't work on a address of the form 4*n + 2, while it works on 4*n.

The legacy workaround was in SMC_outw(), with calls to
machine_is_mainstone(). These calls don't work with a pxa27x-dt
machine type, which is used when a generic device-tree pxa27x machine
is used to boot the mainstone board.

Therefore, this series enables the smc91c111 adapter of the mainstone
board to work on a device-tree build, exaclty as it's been working for
years with the legacy arch/arm/mach-pxa/mainstone.c definition.

As a sum up, this extends an existing mechanism to device-tree based
pxa platforms.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a workaround for mainstone, idp and stargate2 boards, for u16 writes
which must be aligned on 32 bits addresses.
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For device-tree builds, platforms such as mainstone, idp and stargate2
must have their u16 writes all aligned on 32 bit boundaries. This is
already enabled in platform data builds, and this patch adds it to
device-tree builds.
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Writes to u16 has a special handling on 3 PXA platforms, where the
hardware wiring forces these writes to be u32 aligned.

This patch isolates this handling for PXA platforms as before, but
enables this "workaround" to be set up dynamically, which will be the
case in device-tree build types.

This patch was tested on 2 PXA platforms : mainstone, which relies on
the workaround, and lubbock, which doesn't.
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of having the smc91x driver relying on machine_is_*() calls,
provide this data through platform data, ie. idp, mainstone and
stargate.

This way, the driver doesn't need anymore machine_is_*() calls, which
wouldn't work anymore with a device-tree build.
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes: 61e84623 ("net: centralize net_device min/max MTU checking")
Signed-off-by: NBert Kenward <bkenward@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Zach Brown says:

====================
Add support for led triggers on phy link state change

Fix skge driver that declared enum contants that conflicted with enum
constants in linux/leds.h

Create function that encapsulates actions taken during the adjust phy link step
of phy state changes.

Create function that provides list of speeds currently supported by the phy.

Add support for led triggers on phy link state changes by adding
a config option. When set the config option will create a set of led triggers
for each phy device. Users can use the led triggers to represent link state
changes on the phy.

v2:
 * New patch that creates phy_adjust_link function to encapsulate actions taken
   when adjusting phy link during phy state changes
 * led trigger speed strings changed to match existing phy speed strings
 * New function that maps speeds to led triggers
 * Replace magic constants with definitions when declaring trigger name
   buffer and number of triggers.
v3:
 * Changed LED_ON to LED_REG_ON in skge driver to avoid possible future
   conflict and improve consistency.
 * Dropped rtl8712 patch that was accepted separately.
v4:
 * tweaked commit message
v5
 * Changed commit message to explain relationship between the new triggers and
   leds driven by phys.
 * Added new patch that creates phy_supported_speeds function.
 * Moved phy_leds_triggers_register and phy_leds_triggers_unregister to
   phy_attach and phy_detach respectively. This change is so the
   phydev->supported field will be filled by the time the triggers are
   registered.
 * Changed hardcoded list of triggers to dynamic list determined by speeds
   return by phy_supported_speeds.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Create an option CONFIG_LED_TRIGGER_PHY (default n), which will create a
set of led triggers for each instantiated PHY device. There is one LED
trigger per link-speed, per-phy.
The triggers are registered during phy_attach and unregistered during
phy_detach.

This allows for a user to configure their system to allow a set of LEDs
not controlled by the phy to represent link state changes on the phy.
LEDS controlled by the phy are unaffected.

For example, we have a board where some of the leds in the
RJ45 socket are controlled by the phy, but others are not. Using the
triggers provided by this patch the leds not controlled by the phy can
be configured to show the current speed of the ethernet connection. The
leds controlled by the phy are unaffected.
Signed-off-by: NJosh Cartwright <josh.cartwright@ni.com>
Signed-off-by: NNathan Sullivan <nathan.sullivan@ni.com>
Signed-off-by: NZach Brown <zach.brown@ni.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

net: phy: Create phy_supported_speeds function which lists speeds currently supported by a phydevice

phy_supported_speeds provides a means to get a list of all the speeds a
phy device currently supports.
Signed-off-by: NZach Brown <zach.brown@ni.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

During phy state machine state transitions some set of actions should
occur whenever the link state changes. These actions should be
encapsulated into a single function

This patch adds the phy_adjust_link function, which is called whenever
phydev->adjust_link would have been called before. Actions that should
occur whenever the phy link is adjusted can now be added to the
phy_adjust_link function.
Signed-off-by: NZach Brown <zach.brown@ni.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Adding led support for phy causes namespace conflicts for some
phy drivers.

The marvel skge driver declared an enum for representing the states of
Link LED Register. The enum contained constant LED_OFF which conflicted
with declartation found in linux/leds.h.
LED_OFF changed to LED_REG_OFF
Also changed LED_ON to LED_REG_ON to avoid possible future conflict and
for consistency.
Signed-off-by: NZach Brown <zach.brown@ni.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

David Ahern says:

====================
net: Fix netdev adjacency tracking

The netdev adjacency tracking is failing to create proper dependencies
for some topologies. For example this topology

        +--------+
        |  myvrf |
        +--------+
          |    |
          |  +---------+
          |  | macvlan |
          |  +---------+
          |    |
      +----------+
      |  bridge  |
      +----------+
          |
      +--------+
      | bond1  |
      +--------+
          |
      +--------+
      |  eth3  |
      +--------+

hits 1 of 2 problems depending on the order of enslavement. The base set of
commands for both cases:

    ip link add bond1 type bond
    ip link set bond1 up
    ip link set eth3 down
    ip link set eth3 master bond1
    ip link set eth3 up

    ip link add bridge type bridge
    ip link set bridge up
    ip link add macvlan link bridge type macvlan
    ip link set macvlan up

    ip link add myvrf type vrf table 1234
    ip link set myvrf up

    ip link set bridge master myvrf

Case 1 enslave macvlan to the vrf before enslaving the bond to the bridge:

    ip link set macvlan master myvrf
    ip link set bond1 master bridge

Attempts to delete the VRF:
    ip link delete myvrf

trigger the BUG in __netdev_adjacent_dev_remove:

[  587.405260] tried to remove device eth3 from myvrf
[  587.407269] ------------[ cut here ]------------
[  587.408918] kernel BUG at /home/dsa/kernel.git/net/core/dev.c:5661!
[  587.411113] invalid opcode: 0000 [#1] SMP
[  587.412454] Modules linked in: macvlan bridge stp llc bonding vrf
[  587.414765] CPU: 0 PID: 726 Comm: ip Not tainted 4.8.0+ #109
[  587.416766] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[  587.420241] task: ffff88013ab6eec0 task.stack: ffffc90000628000
[  587.422163] RIP: 0010:[<ffffffff813cef03>]  [<ffffffff813cef03>] __netdev_adjacent_dev_remove+0x40/0x12c
...
[  587.446053] Call Trace:
[  587.446424]  [<ffffffff813d1542>] __netdev_adjacent_dev_unlink+0x20/0x3c
[  587.447390]  [<ffffffff813d16a3>] netdev_upper_dev_unlink+0xfa/0x15e
[  587.448297]  [<ffffffffa00003a3>] vrf_del_slave+0x13/0x2a [vrf]
[  587.449153]  [<ffffffffa00004a4>] vrf_dev_uninit+0xea/0x114 [vrf]
[  587.450036]  [<ffffffff813d19b0>] rollback_registered_many+0x22b/0x2da
[  587.450974]  [<ffffffff813d1aac>] unregister_netdevice_many+0x17/0x48
[  587.451903]  [<ffffffff813de444>] rtnl_delete_link+0x3c/0x43
[  587.452719]  [<ffffffff813dedcd>] rtnl_dellink+0x180/0x194

When the BUG is converted to a WARN_ON it shows 4 missing adjacencies:
  eth3 - myvrf, mvrf - eth3, bond1 - myvrf and myvrf - bond1

All of those are because the __netdev_upper_dev_link function does not
properly link macvlan lower devices to myvrf when it is enslaved.

The second case just flips the ordering of the enslavements:
    ip link set bond1 master bridge
    ip link set macvlan master myvrf

Then run:
    ip link delete bond1
    ip link delete myvrf

The vrf delete command hangs because myvrf has a reference that has not
been released. In this case the removal code does not account for 2 paths
between eth3 and myvrf - one from bridge to vrf and the other through the
macvlan.

Rather than try to maintain a linked list of all upper and lower devices
per netdevice, only track the direct neighbors. The remaining stack can
be determined by recursively walking the neighbors.

The existing netdev_for_each_all_upper_dev_rcu,
netdev_for_each_all_lower_dev and netdev_for_each_all_lower_dev_rcu macros
are replaced with APIs that walk the upper and lower device lists. The
new APIs take a callback function and a data arg that is passed to the
callback for each device in the list. Drivers using the old macros are
converted in separate patches to make it easier on reviewers. It is an
API conversion only; no functional change is intended.

v3
- address Stephen's comment to simplify logic and remove typecasts

v2
- fixed bond0 references in cover-letter
- fixed definition of netdev_next_lower_dev_rcu to mirror the upper_dev
  version.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Adjacency code only has debugs for the insert case. Add debugs for
the remove path and make both consistently worded to make it easier
to follow the insert and removal with reference counts.

In addition, change the BUG to a WARN_ON. A missing adjacency at
removal time is not cause for a panic.
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Lower list should be empty just like upper.
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Only direct adjacencies are maintained. All upper or lower devices can
be learned via the new walk API which recursively walks the adj_list for
upper devices or lower devices.
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert rocker to the new dev walk API. This is just a code conversion;
no functional change is intended.

v2
- removed typecast of data
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert mlxsw users to new dev walk API. This is just a code conversion;
no functional change is intended.
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert ixgbe users to new dev walk API. This is just a code conversion;
no functional change is intended.
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert ipoib_get_net_dev_match_addr to the new upper device walk API.
This is just a code conversion; no functional change is intended.

v2
- removed typecast of data
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert rdma_is_upper_dev_rcu, handle_netdev_upper and
ipoib_get_net_dev_match_addr to the new upper device walk API.
This is just a code conversion; no functional change is intended.

v2
- removed typecast of data
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert alb_send_learning_packets and bond_has_this_ip to use the new
netdev_walk_all_upper_dev_rcu API. In both cases this is just a code
conversion; no functional change is intended.

v2
- removed typecast of data and simplified bond_upper_dev_walk
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch introduces netdev_walk_all_upper_dev_rcu,
netdev_walk_all_lower_dev and netdev_walk_all_lower_dev_rcu. These
functions recursively walk the adj_list of devices to determine all upper
and lower devices.

The functions take a callback function that is invoked for each device
in the list. If the callback returns non-0, the walk is terminated and
the functions return that code back to callers.

v3
- simplified netdev_has_upper_dev_all_rcu and __netdev_has_upper_dev and
  removed typecast as suggested by Stephen

v2
- fixed definition of netdev_next_lower_dev_rcu to mirror the upper_dev
  version.
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 93409033 ("net: Add netdev all_adj_list refcnt propagation to
fix panic") propagated the refnr to insert and remove functions tracking
the netdev adjacency graph. However, for the insert path the refnr can
only be 1. Accordingly, remove the refnr argument to make that clear.
ie., the refnr arg in 93409033 was only needed for the remove path.
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
Move to BPF selftests

This set improves the test_verifier and test_maps suite and moves
it over to a new BPF selftest directory, so we can keep improving
it under kernel selftest umbrella. This also integrates a test
script for checking test_bpf.ko under various JIT options.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a start of a test suite for kernel selftests. This moves test_verifier
and test_maps over to tools/testing/selftests/bpf/ along with various
code improvements and also adds a script for invoking test_bpf module.
The test suite can simply be run via selftest framework, f.e.:

  # cd tools/testing/selftests/bpf/
  # make
  # make run_tests

Both test_verifier and test_maps were kind of misplaced in samples/bpf/
directory and we were looking into adding them to selftests for a while
now, so it can be picked up by kbuild bot et al and hopefully also get
more exposure and thus new test case additions.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add several spill/fill tests. Besides others, one that performs xadd
on the spilled register, one ldx/stx test where different types are
spilled from two branches and read out from common path. Verfier does
handle all correctly.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jarod Wilson says:

====================
ethernet: use core min/max MTU checking

Now that the network stack core min/max MTU checking infrastructure is in
place, time to start making drivers use it. We'll start with the easiest
ones, the ethernet drivers, split roughly by vendor, with a catch-all
patch at the end.

For the most part, every patch does the same essential thing: removes the
MTU range checking from the drivers' ndo_change_mtu function, puts those
ranges into the core net_device min_mtu and max_mtu fields, and where
possible, removes ndo_change_mtu functions entirely.

These patches have all been built through the 0-day build infrastructure
provided by Intel, on top of net-next as of October 17.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

et131x: min_mtu 64, max_mtu 9216

altera_tse: min_mtu 64, max_mtu 1500

amd8111e: min_mtu 60, max_mtu 9000

bnad: min_mtu 46, max_mtu 9000

macb: min_mtu 68, max_mtu 1500 or 10240 depending on hardware capability

xgmac: min_mtu 46, max_mtu 9000

cxgb2: min_mtu 68, max_mtu 9582 (pm3393) or 9600 (vsc7326)

enic: min_mtu 68, max_mtu 9000

gianfar: min_mtu 50, max_mu 9586

hns_enet: min_mtu 68, max_mtu 9578 (v1) or 9706 (v2)

ksz884x: min_mtu 60, max_mtu 1894

myri10ge: min_mtu 68, max_mtu 9000

natsemi: min_mtu 64, max_mtu 2024

nfp: min_mtu 68, max_mtu hardware-specific

forcedeth: min_mtu 64, max_mtu 1500 or 9100, depending on hardware

pch_gbe: min_mtu 46, max_mtu 10300

pasemi_mac: min_mtu 64, max_mtu 9000

qcaspi: min_mtu 46, max_mtu 1500
- remove qcaspi_netdev_change_mtu as it is now redundant

rocker: min_mtu 68, max_mtu 9000

sxgbe: min_mtu 68, max_mtu 9000

stmmac: min_mtu 46, max_mtu depends on hardware

tehuti: min_mtu 60, max_mtu 16384
- driver had no max mtu checking, but product docs say 16k jumbo packets
  are supported by the hardware

netcp: min_mtu 68, max_mtu 9486
- remove netcp_ndo_change_mtu as it is now redundant

via-velocity: min_mtu 64, max_mtu 9000

octeon: min_mtu 46, max_mtu 65370

CC: netdev@vger.kernel.org
CC: Mark Einon <mark.einon@gmail.com>
CC: Vince Bridgers <vbridger@opensource.altera.com>
CC: Rasesh Mody <rasesh.mody@qlogic.com>
CC: Nicolas Ferre <nicolas.ferre@atmel.com>
CC: Santosh Raspatur <santosh@chelsio.com>
CC: Hariprasad S <hariprasad@chelsio.com>
CC:  Christian Benvenuti <benve@cisco.com>
CC: Sujith Sankar <ssujith@cisco.com>
CC: Govindarajulu Varadarajan <_govind@gmx.com>
CC: Neel Patel <neepatel@cisco.com>
CC: Claudiu Manoil <claudiu.manoil@freescale.com>
CC: Yisen Zhuang <yisen.zhuang@huawei.com>
CC: Salil Mehta <salil.mehta@huawei.com>
CC: Hyong-Youb Kim <hykim@myri.com>
CC: Jakub Kicinski <jakub.kicinski@netronome.com>
CC: Olof Johansson <olof@lixom.net>
CC: Jiri Pirko <jiri@resnulli.us>
CC: Byungho An <bh74.an@samsung.com>
CC: Girish K S <ks.giri@samsung.com>
CC: Vipul Pandya <vipul.pandya@samsung.com>
CC: Giuseppe Cavallaro <peppe.cavallaro@st.com>
CC: Alexandre Torgue <alexandre.torgue@st.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: Wingman Kwok <w-kwok2@ti.com>
CC: Murali Karicheri <m-karicheri2@ti.com>
CC: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

gelic_net: min_mtu 64, max_mtu 1518
- remove gelic_net_change_mtu now that it is redundant

spidernet: min_Mtu 64, max_mtu 2294
- remove spiter_net_change_mtu now that it is redundant

CC: netdev@vger.kernel.org
CC: Geoff Levand <geoff@infradead.org>
CC: Ishizaki Kou <kou.ishizaki@toshiba.co.jp>
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tilegx: min_mtu 68, max_mtu 1500 or 9000, depending on modparam
- remove tile_net_change_mtu now that it is fully redundant

tilepro: min_mtu 68, max_mtu 1500
- hardware supports jumbo packets up to 10226, but it's not implemented or
  tested yet, according to code comments

CC: netdev@vger.kernel.org
CC: Chris Metcalf <cmetcalf@mellanox.com>
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ehea: min_mtu 68, max_mtu 9022
- remove ehea_change_mtu, it's now redundant

emac: min_mtu 46, max_mtu 1500 or whatever gets read from OF

CC: netdev@vger.kernel.org
CC: Douglas Miller <dougmill@linux.vnet.ibm.com>
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

liquidio: min_mtu 68, max_mtu 16000

thunder: min_mtu 64, max_mtu 9200

CC: netdev@vger.kernel.org
CC: Sunil Goutham <sgoutham@cavium.com>
CC: Robert Richter <rric@kernel.org>
CC: Derek Chickles <derek.chickles@caviumnetworks.com>
CC: Satanand Burla <satananda.burla@caviumnetworks.com>
CC: Felix Manlunas <felix.manlunas@caviumnetworks.com>
CC: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

s2io: min_mtu 46, max_mtu 9600

vxge: min_mtu 68, max_mtu 9600

CC: netdev@vger.kernel.org
CC: Jon Mason <jdmason@kudzu.us>
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

dl2k: min_mtu 68, max_mtu 1536 or 8000, depending on hardware
- Removed change_mtu, does nothing productive anymore

sundance: min_mtu 68, max_mtu 8191

CC: netdev@vger.kernel.org
CC: Denis Kirjanov <kda@linux-powerpc.org>
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>