Commit 0a5539f6 ("bpf: Provide a linux/types.h override
for bpf selftests.") caused a build failure for tools/testing/selftest/bpf
because of some missing types:
    $ make -C tools/testing/selftests/bpf/
    ...
    In file included from /home/yhs/work/net-next/tools/testing/selftests/bpf/test_pkt_access.c:8:
    ../../../include/uapi/linux/bpf.h:170:3: error: unknown type name '__aligned_u64'
                    __aligned_u64   key;
    ...
    /usr/include/linux/swab.h:160:8: error: unknown type name '__always_inline'
    static __always_inline __u16 __swab16p(const __u16 *p)
    ...
The type __aligned_u64 is defined in linux:include/uapi/linux/types.h.

The fix is to copy missing type definition into
tools/testing/selftests/bpf/include/uapi/linux/types.h.
Adding additional include "string.h" resolves __always_inline issue.

Fixes: 0a5539f6 ("bpf: Provide a linux/types.h override for bpf selftests.")
Signed-off-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt_en: DCBX fixes.

2 bug fixes for the case where the NIC's firmware DCBX agent is enabled.
With these fixes, we will return the proper information to lldpad.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Otherwise, all the host based DCBX settings from lldpad will fail if the
firmware DCBX agent is running.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the current code, bnxt_dcb_init() is called too early before we
determine if the firmware DCBX agent is running or not.  As a result,
we are not setting the DCB_CAP_DCBX_HOST and DCB_CAP_DCBX_LLD_MANAGED
flags properly to report to DCBNL.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If CONFIG_INET is not set, net/core/sock.c can not compile :

net/core/sock.c: In function ‘skb_orphan_partial’:
net/core/sock.c:1810:2: error: implicit declaration of function
‘skb_is_tcp_pure_ack’ [-Werror=implicit-function-declaration]
  if (skb_is_tcp_pure_ack(skb))
  ^

Fix this by always including <net/tcp.h>

Fixes: f6ba8d33 ("netem: fix skb_orphan_partial()")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The KASAN warning repoted below was discovered with a syzkaller
program.  The reproducer is basically:
  int s = socket(AF_INET6, SOCK_RAW, NEXTHDR_HOP);
  send(s, &one_byte_of_data, 1, MSG_MORE);
  send(s, &more_than_mtu_bytes_data, 2000, 0);

The socket() call sets the nexthdr field of the v6 header to
NEXTHDR_HOP, the first send call primes the payload with a non zero
byte of data, and the second send call triggers the fragmentation path.

The fragmentation code tries to parse the header options in order
to figure out where to insert the fragment option.  Since nexthdr points
to an invalid option, the calculation of the size of the network header
can made to be much larger than the linear section of the skb and data
is read outside of it.

This fix makes ip6_find_1stfrag return an error if it detects
running out-of-bounds.

[   42.361487] ==================================================================
[   42.364412] BUG: KASAN: slab-out-of-bounds in ip6_fragment+0x11c8/0x3730
[   42.365471] Read of size 840 at addr ffff88000969e798 by task ip6_fragment-oo/3789
[   42.366469]
[   42.366696] CPU: 1 PID: 3789 Comm: ip6_fragment-oo Not tainted 4.11.0+ #41
[   42.367628] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-1ubuntu1 04/01/2014
[   42.368824] Call Trace:
[   42.369183]  dump_stack+0xb3/0x10b
[   42.369664]  print_address_description+0x73/0x290
[   42.370325]  kasan_report+0x252/0x370
[   42.370839]  ? ip6_fragment+0x11c8/0x3730
[   42.371396]  check_memory_region+0x13c/0x1a0
[   42.371978]  memcpy+0x23/0x50
[   42.372395]  ip6_fragment+0x11c8/0x3730
[   42.372920]  ? nf_ct_expect_unregister_notifier+0x110/0x110
[   42.373681]  ? ip6_copy_metadata+0x7f0/0x7f0
[   42.374263]  ? ip6_forward+0x2e30/0x2e30
[   42.374803]  ip6_finish_output+0x584/0x990
[   42.375350]  ip6_output+0x1b7/0x690
[   42.375836]  ? ip6_finish_output+0x990/0x990
[   42.376411]  ? ip6_fragment+0x3730/0x3730
[   42.376968]  ip6_local_out+0x95/0x160
[   42.377471]  ip6_send_skb+0xa1/0x330
[   42.377969]  ip6_push_pending_frames+0xb3/0xe0
[   42.378589]  rawv6_sendmsg+0x2051/0x2db0
[   42.379129]  ? rawv6_bind+0x8b0/0x8b0
[   42.379633]  ? _copy_from_user+0x84/0xe0
[   42.380193]  ? debug_check_no_locks_freed+0x290/0x290
[   42.380878]  ? ___sys_sendmsg+0x162/0x930
[   42.381427]  ? rcu_read_lock_sched_held+0xa3/0x120
[   42.382074]  ? sock_has_perm+0x1f6/0x290
[   42.382614]  ? ___sys_sendmsg+0x167/0x930
[   42.383173]  ? lock_downgrade+0x660/0x660
[   42.383727]  inet_sendmsg+0x123/0x500
[   42.384226]  ? inet_sendmsg+0x123/0x500
[   42.384748]  ? inet_recvmsg+0x540/0x540
[   42.385263]  sock_sendmsg+0xca/0x110
[   42.385758]  SYSC_sendto+0x217/0x380
[   42.386249]  ? SYSC_connect+0x310/0x310
[   42.386783]  ? __might_fault+0x110/0x1d0
[   42.387324]  ? lock_downgrade+0x660/0x660
[   42.387880]  ? __fget_light+0xa1/0x1f0
[   42.388403]  ? __fdget+0x18/0x20
[   42.388851]  ? sock_common_setsockopt+0x95/0xd0
[   42.389472]  ? SyS_setsockopt+0x17f/0x260
[   42.390021]  ? entry_SYSCALL_64_fastpath+0x5/0xbe
[   42.390650]  SyS_sendto+0x40/0x50
[   42.391103]  entry_SYSCALL_64_fastpath+0x1f/0xbe
[   42.391731] RIP: 0033:0x7fbbb711e383
[   42.392217] RSP: 002b:00007ffff4d34f28 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[   42.393235] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fbbb711e383
[   42.394195] RDX: 0000000000001000 RSI: 00007ffff4d34f60 RDI: 0000000000000003
[   42.395145] RBP: 0000000000000046 R08: 00007ffff4d34f40 R09: 0000000000000018
[   42.396056] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000400aad
[   42.396598] R13: 0000000000000066 R14: 00007ffff4d34ee0 R15: 00007fbbb717af00
[   42.397257]
[   42.397411] Allocated by task 3789:
[   42.397702]  save_stack_trace+0x16/0x20
[   42.398005]  save_stack+0x46/0xd0
[   42.398267]  kasan_kmalloc+0xad/0xe0
[   42.398548]  kasan_slab_alloc+0x12/0x20
[   42.398848]  __kmalloc_node_track_caller+0xcb/0x380
[   42.399224]  __kmalloc_reserve.isra.32+0x41/0xe0
[   42.399654]  __alloc_skb+0xf8/0x580
[   42.400003]  sock_wmalloc+0xab/0xf0
[   42.400346]  __ip6_append_data.isra.41+0x2472/0x33d0
[   42.400813]  ip6_append_data+0x1a8/0x2f0
[   42.401122]  rawv6_sendmsg+0x11ee/0x2db0
[   42.401505]  inet_sendmsg+0x123/0x500
[   42.401860]  sock_sendmsg+0xca/0x110
[   42.402209]  ___sys_sendmsg+0x7cb/0x930
[   42.402582]  __sys_sendmsg+0xd9/0x190
[   42.402941]  SyS_sendmsg+0x2d/0x50
[   42.403273]  entry_SYSCALL_64_fastpath+0x1f/0xbe
[   42.403718]
[   42.403871] Freed by task 1794:
[   42.404146]  save_stack_trace+0x16/0x20
[   42.404515]  save_stack+0x46/0xd0
[   42.404827]  kasan_slab_free+0x72/0xc0
[   42.405167]  kfree+0xe8/0x2b0
[   42.405462]  skb_free_head+0x74/0xb0
[   42.405806]  skb_release_data+0x30e/0x3a0
[   42.406198]  skb_release_all+0x4a/0x60
[   42.406563]  consume_skb+0x113/0x2e0
[   42.406910]  skb_free_datagram+0x1a/0xe0
[   42.407288]  netlink_recvmsg+0x60d/0xe40
[   42.407667]  sock_recvmsg+0xd7/0x110
[   42.408022]  ___sys_recvmsg+0x25c/0x580
[   42.408395]  __sys_recvmsg+0xd6/0x190
[   42.408753]  SyS_recvmsg+0x2d/0x50
[   42.409086]  entry_SYSCALL_64_fastpath+0x1f/0xbe
[   42.409513]
[   42.409665] The buggy address belongs to the object at ffff88000969e780
[   42.409665]  which belongs to the cache kmalloc-512 of size 512
[   42.410846] The buggy address is located 24 bytes inside of
[   42.410846]  512-byte region [ffff88000969e780, ffff88000969e980)
[   42.411941] The buggy address belongs to the page:
[   42.412405] page:ffffea000025a780 count:1 mapcount:0 mapping:          (null) index:0x0 compound_mapcount: 0
[   42.413298] flags: 0x100000000008100(slab|head)
[   42.413729] raw: 0100000000008100 0000000000000000 0000000000000000 00000001800c000c
[   42.414387] raw: ffffea00002a9500 0000000900000007 ffff88000c401280 0000000000000000
[   42.415074] page dumped because: kasan: bad access detected
[   42.415604]
[   42.415757] Memory state around the buggy address:
[   42.416222]  ffff88000969e880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   42.416904]  ffff88000969e900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   42.417591] >ffff88000969e980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   42.418273]                    ^
[   42.418588]  ffff88000969ea00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   42.419273]  ffff88000969ea80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   42.419882] ==================================================================
Reported-by: NAndrey Konovalov <andreyknvl@google.com>
Signed-off-by: NCraig Gallek <kraig@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It's a common practice to send gratuitous ARPs after moving an
IP address to another device to speed up healing of a service. To
fulfill service availability constraints, the timing of network peers
updating their caches to point to a new location of an IP address can be
particularly important.

Sometimes neigh_update calls won't touch neither lladdr nor state, for
example if an update arrives in locktime interval. The neigh->updated
value is tested by the protocol specific neigh code, which in turn
will influence whether NEIGH_UPDATE_F_OVERRIDE gets set in the
call to neigh_update() or not. As a result, we may effectively ignore
the update request, bailing out of touching the neigh entry, except that
we still bump its timestamps inside neigh_update.

This may be a problem for updates arriving in quick succession. For
example, consider the following scenario:

A service is moved to another device with its IP address. The new device
sends three gratuitous ARP requests into the network with ~1 seconds
interval between them. Just before the first request arrives to one of
network peer nodes, its neigh entry for the IP address transitions from
STALE to DELAY.  This transition, among other things, updates
neigh->updated. Once the kernel receives the first gratuitous ARP, it
ignores it because its arrival time is inside the locktime interval. The
kernel still bumps neigh->updated. Then the second gratuitous ARP
request arrives, and it's also ignored because it's still in the (new)
locktime interval. Same happens for the third request. The node
eventually heals itself (after delay_first_probe_time seconds since the
initial transition to DELAY state), but it just wasted some time and
require a new ARP request/reply round trip. This unfortunate behaviour
both puts more load on the network, as well as reduces service
availability.

This patch changes neigh_update so that it bumps neigh->updated (as well
as neigh->confirmed) only once we are sure that either lladdr or entry
state will change). In the scenario described above, it means that the
second gratuitous ARP request will actually update the entry lladdr.

Ideally, we would update the neigh entry on the very first gratuitous
ARP request. The locktime mechanism is designed to ignore ARP updates in
a short timeframe after a previous ARP update was honoured by the kernel
layer. This would require tracking timestamps for state transitions
separately from timestamps when actual updates are received. This would
probably involve changes in neighbour struct. Therefore, the patch
doesn't tackle the issue of the first gratuitous APR ignored, leaving
it for a follow-up.
Signed-off-by: NIhar Hrachyshka <ihrachys@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When arp_accept is 1, gratuitous ARPs are supposed to override matching
entries irrespective of whether they arrive during locktime. This was
implemented in commit 56022a8f ("ipv4: arp: update neighbour address
when a gratuitous arp is received and arp_accept is set")

There is a glitch in the patch though. RFC 2002, section 4.6, "ARP,
Proxy ARP, and Gratuitous ARP", defines gratuitous ARPs so that they can
be either of Request or Reply type. Those Reply gratuitous ARPs can be
triggered with standard tooling, for example, arping -A option does just
that.

This patch fixes the glitch, making both Request and Reply flavours of
gratuitous ARPs to behave identically.

As per RFC, if gratuitous ARPs are of Reply type, their Target Hardware
Address field should also be set to the link-layer address to which this
cache entry should be updated. The field is present in ARP over Ethernet
but not in IEEE 1394. In this patch, I don't consider any broadcasted
ARP replies as gratuitous if the field is not present, to conform the
standard. It's not clear whether there is such a thing for IEEE 1394 as
a gratuitous ARP reply; until it's cleared up, we will ignore such
broadcasts. Note that they will still update existing ARP cache entries,
assuming they arrive out of locktime time interval.
Signed-off-by: NIhar Hrachyshka <ihrachys@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We now reference the arp_tbl, which requires IPv4 support to be
enabled in the kernel, otherwise we get a link error:

drivers/net/built-in.o: In function `mlx5e_tc_update_neigh_used_value':
(.text+0x16afec): undefined reference to `arp_tbl'
drivers/net/built-in.o: In function `mlx5e_rep_neigh_init':
en_rep.c:(.text+0x16c16d): undefined reference to `arp_tbl'
drivers/net/built-in.o: In function `mlx5e_rep_netevent_event':
en_rep.c:(.text+0x16cbb5): undefined reference to `arp_tbl'

This adds a Kconfig dependency for it.

Fixes: 232c0013 ("net/mlx5e: Add support to neighbour update flow")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In general, rtnetlink dumps do not anticipate failure to dump a single
object (e.g., link or route) on a single pass. As both route and link
objects have grown via more attributes, that is no longer a given.

netlink dumps can handle a failure if the dump function returns an
error; specifically, netlink_dump adds the return code to the response
if it is <= 0 so userspace is notified of the failure. The missing
piece is the rtnetlink dump functions returning the error.

Fix route and link dump functions to return the errors if no object is
added to an skb (detected by skb->len != 0). IPv6 route dumps
(rt6_dump_route) already return the error; this patch updates IPv4 and
link dumps. Other dump functions may need to be ajusted as well.
Reported-by: NJan Moskyto Matejka <mq@ucw.cz>
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver explicitly bypasses APIs to register all memory once a
connection is made, and thus allows remote access to memory.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Acked-by: NUrsula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, SMC enables remote access to physical memory when a user
has successfully configured and established an SMC-connection until ten
minutes after the last SMC connection is closed. Because this is considered
a security risk, drivers are supposed to use IB_PD_UNSAFE_GLOBAL_RKEY in
such a case.

This patch changes the current SMC code to use IB_PD_UNSAFE_GLOBAL_RKEY.
This improves user awareness, but does not remove the security risk itself.
Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The skb->dev that is passed into ip_mr_input is
the loX device for VRFs. When we lookup a vif
for this dev, none is found as we do not create
vifs for loopbacks. Instead lookup a vif for the
actual device that the packet was received on,
eg the vlan.
Signed-off-by: NThomas Winter <Thomas.Winter@alliedtelesis.co.nz>
cc: David Ahern <dsa@cumulusnetworks.com>
cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
cc: roopa <roopa@cumulusnetworks.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tcp_ack() can call tcp_fragment() which may dededuct the
value tp->fackets_out when MSS changes. When prior_fackets
is larger than tp->fackets_out, tcp_clean_rtx_queue() can
invoke tcp_update_reordering() with negative values. This
results in absurd tp->reodering values higher than
sysctl_tcp_max_reordering.

Note that tcp_update_reordering indeeds sets tp->reordering
to min(sysctl_tcp_max_reordering, metric), but because
the comparison is signed, a negative metric always wins.

Fixes: c7caf8d3 ("[TCP]: Fix reord detection due to snd_una covered holes")
Reported-by: NRebecca Isaacs <risaacs@google.com>
Signed-off-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Track alignment in BPF verifier so that legitimate programs won't be
    rejected on !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS architectures.

 2) Make tail calls work properly in arm64 BPF JIT, from Deniel
    Borkmann.

 3) Make the configuration and semantics Generic XDP make more sense and
    don't allow both generic XDP and a driver specific instance to be
    active at the same time. Also from Daniel.

 4) Don't crash on resume in xen-netfront, from Vitaly Kuznetsov.

 5) Fix use-after-free in VRF driver, from Gao Feng.

 6) Use netdev_alloc_skb_ip_align() to avoid unaligned IP headers in
    qca_spi driver, from Stefan Wahren.

 7) Always run cleanup routines in BPF samples when we get SIGTERM, from
    Andy Gospodarek.

 8) The mdio phy code should bring PHYs out of reset using the shared
    GPIO lines before invoking bus->reset(). From Florian Fainelli.

 9) Some USB descriptor access endian fixes in various drivers from
    Johan Hovold.

10) Handle PAUSE advertisements properly in mlx5 driver, from Gal
    Pressman.

11) Fix reversed test in mlx5e_setup_tc(), from Saeed Mahameed.

12) Cure netdev leak in AF_PACKET when using timestamping via control
    messages. From Douglas Caetano dos Santos.

13) netcp doesn't support HWTSTAMP_FILTER_ALl, reject it. From Miroslav
    Lichvar.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
  ldmvsw: stop the clean timer at beginning of remove
  ldmvsw: unregistering netdev before disable hardware
  net: netcp: fix check of requested timestamping filter
  ipv6: avoid dad-failures for addresses with NODAD
  qed: Fix uninitialized data in aRFS infrastructure
  mdio: mux: fix device_node_continue.cocci warnings
  net/packet: fix missing net_device reference release
  net/mlx4_core: Use min3 to select number of MSI-X vectors
  macvlan: Fix performance issues with vlan tagged packets
  net: stmmac: use correct pointer when printing normal descriptor ring
  net/mlx5: Use underlay QPN from the root name space
  net/mlx5e: IPoIB, Only support regular RQ for now
  net/mlx5e: Fix setup TC ndo
  net/mlx5e: Fix ethtool pause support and advertise reporting
  net/mlx5e: Use the correct pause values for ethtool advertising
  vmxnet3: ensure that adapter is in proper state during force_close
  sfc: revert changes to NIC revision numbers
  net: ch9200: add missing USB-descriptor endianness conversions
  net: irda: irda-usb: fix firmware name on big-endian hosts
  net: dsa: mv88e6xxx: add default case to switch
  ...

Pull cifs fixes from Steve French:
 "A set of minor cifs fixes"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  [CIFS] Minor cleanup of xattr query function
  fs: cifs: transport: Use time_after for time comparison
  SMB2: Fix share type handling
  cifs: cifsacl: Use a temporary ops variable to reduce code length
  Don't delay freeing mids when blocked on slow socket write of request
  CIFS: silence lockdep splat in cifs_relock_file()

Shannon Nelson says:

====================
ldmvsw: port removal stability

Under heavy reboot stress testing we found a couple of timing issues
when removing the device that could cause the kernel great heartburn,
addressed by these two patches.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Stop the clean timer earlier to be sure there's no asynchronous
interference while stopping the port.

Orabug: 25748241
Signed-off-by: NShannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When running LDom binding/unbinding test, kernel may panic
in ldmvsw_open(). It is more likely that because we're removing
the ldc connection before unregistering the netdev in vsw_port_remove(),
we set up a window of time where one process could be removing the
device while another trying to UP the device. This also sometimes causes
vio handshake error due to opening a device without closing it completely.
We should unregister the netdev before we disable the "hardware".

Orabug: 25980913, 25925306
Signed-off-by: NThomas Tai <thomas.tai@oracle.com>
Signed-off-by: NShannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver doesn't support timestamping of all received packets and
should return error when trying to enable the HWTSTAMP_FILTER_ALL
filter.

Cc: WingMan Kwok <w-kwok2@ti.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NMiroslav Lichvar <mlichvar@redhat.com>
Acked-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2017-05-12

This series contains some mlx5 fixes for net.
Please pull and let me know if there's any problem.

For -stable:
("net/mlx5e: Fix ethtool pause support and advertise reporting") kernels >= 4.8
("net/mlx5e: Use the correct pause values for ethtool advertising") kernels >= 4.8

v1->v2:
 Dropped statistics spinlock patch, it needs some extra work.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Every address gets added with TENTATIVE flag even for the addresses with
IFA_F_NODAD flag and dad-work is scheduled for them. During this DAD process
we realize it's an address with NODAD and complete the process without
sending any probe. However the TENTATIVE flags stays on the
address for sometime enough to cause misinterpretation when we receive a NS.
While processing NS, if the address has TENTATIVE flag, we mark it DADFAILED
and endup with an address that was originally configured as NODAD with
DADFAILED.

We can't avoid scheduling dad_work for addresses with NODAD but we can
avoid adding TENTATIVE flag to avoid this racy situation.
Signed-off-by: NMahesh Bandewar <maheshb@google.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Current memset is using incorrect type of variable, causing the
upper-half of the strucutre to be left uninitialized and causing:

  ethernet/qlogic/qed/qed_init_fw_funcs.c: In function 'qed_set_rfs_mode_disable':
  ethernet/qlogic/qed/qed_init_fw_funcs.c:993:3: error: '*((void *)&ramline+4)' is used uninitialized in this function [-Werror=uninitialized]

Fixes: d51e4af5 ("qed: aRFS infrastructure support")
Reported-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NYuval Mintz <Yuval.Mintz@cavium.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Device node iterators put the previous value of the index variable, so an
explicit put causes a double put.

In particular, of_mdiobus_register can fail before doing anything
interesting, so one could view it as a no-op from the reference count
point of view.

Generated by: scripts/coccinelle/iterators/device_node_continue.cocci

CC: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: NJulia Lawall <julia.lawall@lip6.fr>
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When using a TX ring buffer, if an error occurs processing a control
message (e.g. invalid message), the net_device reference is not
released.

Fixes c14ac945 ("sock: enable timestamping using control messages")
Signed-off-by: NDouglas Caetano dos Santos <douglascs@taghos.com.br>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NYuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Macvlan always turns on offload features that have sofware
fallback (NETIF_GSO_SOFTWARE).  This allows much higher guest-guest
communications over macvtap.

However, macvtap does not turn on these features for vlan tagged traffic.
As a result, depending on the HW that mactap is configured on, the
performance of guest-guest communication over a vlan is very
inconsistent.  If the HW supports TSO/UFO over vlans, then the
performance will be fine.  If not, the the performance will suffer
greatly since the VM may continue using TSO/UFO, and will force the host
segment the traffic and possibly overlow the macvtap queue.

This patch adds the always on offloads to vlan_features.  This
makes sure that any vlan tagged traffic between 2 guest will not
be segmented needlessly.
Signed-off-by: NVladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are two pointers in sysfs_display_ring,
one that increments if using normal dma descriptors,
another if using extended dma descriptors.

When printing the normal dma descriptors, the wrong pointer is used,
thus the printed descriptor addresses are incorrect.
Signed-off-by: NNiklas Cassel <niklas.cassel@axis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Root flow table is dynamically changed by the underlying flow steering
layer, and IPoIB/ULPs have no idea what will be the root flow table in
the future, hence we need a dynamic infrastructure to move Underlay QPs
with the root flow table.

Fixes: b3ba5149 ("net/mlx5: Refactor create flow table method to accept underlay QP")
Signed-off-by: NErez Shitrit <erezsh@mellanox.com>
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

IPoIB doesn't support striding RQ at the moment, for this
we need to explicitly choose non striding RQ in IPoIB init,
even if the HW supports it.

Fixes: 8f493ffd ("net/mlx5e: IPoIB, RX steering RSS RQTs and TIRs")
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Fail-safe support patches introduced a trivial bug,
setup tc callback is doing a wrong check of the netdevice state,
the fix is simply to invert the condition.

Fixes: 6f9485af ("net/mlx5e: Fail safe tc setup")
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Pause bit should set when RX pause is on, not TX pause.
Also, setting Asym_Pause is incorrect, and should be turned off.

Fixes: 665bc539 ("net/mlx5e: Use new ethtool get/set link ksettings API")
Signed-off-by: NGal Pressman <galp@mellanox.com>
Cc: kernel-team@fb.com
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Query the operational pause from firmware (PFCC register) instead of
always passing zeros.

Fixes: 665bc539 ("net/mlx5e: Use new ethtool get/set link ksettings API")
Signed-off-by: NGal Pressman <galp@mellanox.com>
Cc: kernel-team@fb.com
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Pull some more input subsystem updates from Dmitry Torokhov:
 "An updated xpad driver with a few more recognized device IDs, and a
  new psxpad-spi driver, allowing connecting Playstation 1 and 2 joypads
  via SPI bus"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: cros_ec_keyb - remove extraneous 'const'
  Input: add support for PlayStation 1/2 joypads connected via SPI
  Input: xpad - add USB IDs for Mad Catz Brawlstick and Razer Sabertooth
  Input: xpad - sync supported devices with xboxdrv
  Input: xpad - sort supported devices by USB ID

Pull UBI/UBIFS updates from Richard Weinberger:

 - new config option CONFIG_UBIFS_FS_SECURITY

 - minor improvements

 - random fixes

* tag 'upstream-4.12-rc1' of git://git.infradead.org/linux-ubifs:
  ubi: Add debugfs file for tracking PEB state
  ubifs: Fix a typo in comment of ioctl2ubifs & ubifs2ioctl
  ubifs: Remove unnecessary assignment
  ubifs: Fix cut and paste error on sb type comparisons
  ubi: fastmap: Fix slab corruption
  ubifs: Add CONFIG_UBIFS_FS_SECURITY to disable/enable security labels
  ubi: Make mtd parameter readable
  ubi: Fix section mismatch

Pull UML fixes from Richard Weinberger:
 "No new stuff, just fixes"

* 'for-linus-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Add missing NR_CPUS include
  um: Fix to call read_initrd after init_bootmem
  um: Include kbuild.h instead of duplicating its macros
  um: Fix PTRACE_POKEUSER on x86_64
  um: Set number of CPUs
  um: Fix _print_addr()

Merge misc fixes from Andrew Morton:
 "15 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm, docs: update memory.stat description with workingset* entries
  mm: vmscan: scan until it finds eligible pages
  mm, thp: copying user pages must schedule on collapse
  dax: fix PMD data corruption when fault races with write
  dax: fix data corruption when fault races with write
  ext4: return to starting transaction in ext4_dax_huge_fault()
  mm: fix data corruption due to stale mmap reads
  dax: prevent invalidation of mapped DAX entries
  Tigran has moved
  mm, vmalloc: fix vmalloc users tracking properly
  mm/khugepaged: add missed tracepoint for collapse_huge_page_swapin
  gcov: support GCC 7.1
  mm, vmstat: Remove spurious WARN() during zoneinfo print
  time: delete current_fs_time()
  hwpoison, memcg: forcibly uncharge LRU pages

Some minor cleanup of cifs query xattr functions (will also make
SMB3 xattr implementation cleaner as well).
Signed-off-by: NSteve French <steve.french@primarydata.com>

Use time_after kernel macro for time comparison
that has safety check.
Signed-off-by: NKarim Eshapa <karim.eshapa@gmail.com>
Signed-off-by: NSteve French <smfrench@gmail.com>