Depending on the video input format, vinmode/vinctl needs adjustments.
For TV, this is not relevant, since the supported decoders output data
at the same format. However, webcam sensors may have different formats,
so, this needs to be adjusted based on the device.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

In order to properly estimate fps, mt9v011 sensor driver needs to know
what is the used frequency on the sensor cristal. Adds the proper fields
and initialization code for specifying the cristal frequency.

Also, based on experimentation, it was noticed that the Silvercrest is
outputing data at 7 fps. This means that it should be using a 6.3 MHz
cristal. This information needs to be double checked later, by opening
the device. Anyway, by using this value for xtal, at least now we have
the correct fps report.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Since frames per second is a function of cristal frequency, and this is
device-specific, add a function that allows adjusting it, via
subdev->core->s_config callback.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

vstart calculus were wrong. Fix it.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

It is possible to adjust the fps rate by changing some register values.
This is function of the connected Xtal at the camera sensor, being a 27
MHz cristal needed, in order to support 640x480 at 30 fps.

For now, it will only calculate the values for fps. Later patches may
introduce V4L2 ioctls, to allow frequency rate adjustments.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

While trying to fix an mt9v001 webcam, I noticed that HSCALE/VSCALE do
work with em28xx + webcam. The issue is that the scaling setup depends
on the number of visible rows/cols of the input image.

With mt9v011 (Silvercrest), the resolution is 640x480. So, the scaling
is different from a normal TV image (720x480 on NTSC). This were causing
a wrong scaling and a previous patch disabled scaling.

As each sensor have their different resolution setting, the xres/yres
should be adjusted accordingly with the input sensor.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

With the previous approach, autodetection were working only for the two
generic entries (em275x and em2820 unknown ones). So, if someone would
try to force probing an specific device, the code would not properly run
the autodetection code.

With the new approach, the sensor autodetection will be run not only for
the two generic entries, but also do webcam specific ones.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Instead of using em28xx board decoder field for storing sensor information,
let's use instead a separate field for it.

Also, as sensors are currently autodetected, there's no need of having
it at the boards description. So, move it to the main em28xx struct.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Webcams in general don't have eeprom. So, the sensor hint code should be
called to properly detect what sensor is inside.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

By having the webcam devices marked as such, it will help the em28xx
driver to do the right thing on those devices.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Just renames the flag, to use a clearer name. Later patches will use
this flag to properly set some drivers behaviors for webcams.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

A couple of erroneous register writes snuck in that made the image go haywire. Remove these.
Many thanks to Grégory Lardière for finding this out
Signed-off-by: NErik Andrén <erik.andren@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NErik Andrén <erik.andren@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

All hdcs registers use bit 0 as a read/write flag and needs to be shifted one bit to the left. This wasn't accounted for when doing a sequence of writes.
Signed-off-by: NErik Andrén <erik.andren@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NErik Andrén <erik.andren@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: Fix UP compile failure caused by irq_thread_check_affinity

Merge branch 'lockdep-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep

* 'lockdep-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep:
  lockdep: Fix lockdep annotation for pipe_double_lock()

Since genirq: Delegate irq affinity setting to the irq thread
(591d2fb0) compilation with
CONFIG_SMP=n fails with following error:

/usr/src/linux-2.6/kernel/irq/manage.c:
   In function 'irq_thread_check_affinity':
/usr/src/linux-2.6/kernel/irq/manage.c:475:
   error: 'struct irq_desc' has no member named 'affinity'
make[4]: *** [kernel/irq/manage.o] Error 1

That commit adds a new function irq_thread_check_affinity() which
uses struct irq_desc.affinity which is only available for CONFIG_SMP=y.
Move that function under #ifdef CONFIG_SMP.

[ tglx@brownpaperbag: compile and boot tested on UP and SMP ]
Signed-off-by: NBruno Premont <bonbons@linux-vserver.org>
LKML-Reference: <20090722222232.2eb3e1c4@neptune.home>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The presumed use of the pipe_double_lock() routine is to lock 2 locks in
a deadlock free way by ordering the locks by their address. However it
fails to keep the specified lock classes in order and explicitly
annotates a deadlock.

Rectify this.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NMiklos Szeredi <mszeredi@suse.cz>
LKML-Reference: <1248163763.15751.11098.camel@twins>

Merge branch 'perf-counters-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-perf

* 'perf-counters-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-perf: (31 commits)
  perf_counter tools: Give perf top inherit option
  perf_counter tools: Fix vmlinux symbol generation breakage
  perf_counter: Detect debugfs location
  perf_counter: Add tracepoint support to perf list, perf stat
  perf symbol: C++ demangling
  perf: avoid structure size confusion by using a fixed size
  perf_counter: Fix throttle/unthrottle event logging
  perf_counter: Improve perf stat and perf record option parsing
  perf_counter: PERF_SAMPLE_ID and inherited counters
  perf_counter: Plug more stack leaks
  perf: Fix stack data leak
  perf_counter: Remove unused variables
  perf_counter: Make call graph option consistent
  perf_counter: Add perf record option to log addresses
  perf_counter: Log vfork as a fork event
  perf_counter: Synthesize VDSO mmap event
  perf_counter: Make sure we dont leak kernel memory to userspace
  perf_counter tools: Fix index boundary check
  perf_counter: Fix the tracepoint channel to perfcounters
  perf_counter, x86: Extend perf_counter Pentium M support
  ...

Merge branch 'core-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  softirq: introduce tasklet_hrtimer infrastructure

Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  clocksource: Prevent NULL pointer dereference
  timer: Avoid reading uninitialized data

Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: Delegate irq affinity setting to the irq thread

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: fix nr_uninterruptible accounting of frozen tasks really
  sched: fix load average accounting vs. cpu hotplug
  sched: Account for vruntime wrapping

* 'tj-block-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc:
  virtio_blk: mark virtio_blk with __refdata to kill spurious section mismatch
  block: sysfs fix mismatched queue_var_{store,show} in 64bit kernel
  ataflop: adjust NULL test
  block: fix failfast merge testing in elv_rq_merge_ok()
  z2ram: Small cleanup for z2ram.c

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  fs/Kconfig: move nilfs2 out

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
  ide-tape: Don't leak kernel stack information
  ide: fix memory leak when flush command is issued

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits)
  sky2: Avoid races in sky2_down
  drivers/net/mlx4: Adjust constant
  drivers/net: Move a dereference below a NULL test
  drivers/net: Move a dereference below a NULL test
  connector: maintainer/mail update.
  USB host CDC Phonet network interface driver
  macsonic, jazzsonic: fix oops on module unload
  macsonic: move probe function to .devinit.text
  can: switch carrier on if device was stopped while in bus-off state
  can: restart device even if dev_alloc_skb() fails
  can: sja1000: remove duplicated includes
  New device ID for sc92031 [1088:2031]
  3c589_cs: re-initialize the multicast in the tc589_reset
  Fix error return for setsockopt(SO_TIMESTAMPING)
  netxen: fix thermal check and shutdown
  netxen: fix deadlock on dev close
  netxen: fix context deletion sequence
  net: Micrel KS8851 SPI network driver
  tcp: Use correct peer adr when copying MD5 keys
  tcp: Fix MD5 signature checking on IPv4 mapped sockets
  ...

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFSv4: Fix a problem whereby a buggy server can oops the kernel
  NFSv4: Fix an NFSv4 mount regression
  NFSv4: Fix an Oops in nfs4_free_lock_state

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: ctxfi: Swapped SURROUND-SIDE channels on emu20k2
  ALSA: ca0106 - Fix the max capture buffer size
  ALSA: hda - Fix pin-setup for Sony VAIO with STAC9872 codecs
  ALSA: hda - Add quirk for Gateway T6834c laptop
  ALSA: OSS sequencer should be initialized after snd_seq_system_client_init
  ALSA: sound/isa: convert nested spin_lock_irqsave to spin_lock
  ALSA: hda_codec: Check for invalid zero connections

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: Move dereferences below a NULL test
  HID: hiddev, fix lock imbalance

the "reserved" field was not initialized to zero, resulting in 4 bytes
of stack data leaking to userspace....
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'linux-next' of git://git.infradead.org/ubi-2.6:
  UBI: fix bug in image sequence number handling
  UBI: gluebi: initialize ubi_num field

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: atkbd - add force relese key quirk for Soltech TA12
  Input: fix EVIOCGNAME/JSIOCGNAME regression
  Input: atkbd - add forced release keys quirk for FSC Amilo Pi 3525
  Input: pcspkr - switch driver to dev_pm_ops
  Input: xpad - don't resend successfully sent outgoing requests
  Input: wistron_btns - recognize Maxdata Pro 7000 notebooks

Currently, perf top -p only tracks the pid provided, which isn't very useful
for watching forky loads, so give it an inherit option.
Signed-off-by: NMike Galbraith <efault@gmx.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1248165036.9795.10.camel@marge.simson.net>

vmlinux meets the criteria for symbol adjustment, which breaks vmlinux generated symbols.
Fix this by exempting vmlinux.  This is a bit fragile in that someone could change the
kernel dso's name, but currently that name is also hardwired.
Signed-off-by: NMike Galbraith <efault@gmx.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1248091298.18702.18.camel@marge.simson.net>

If "/sys/kernel/debug" is not a debugfs mount point, search for the debugfs
filesystem in /proc/mounts, but also allows the user to specify
'--debugfs-dir=blah' or set the environment variable: 'PERF_DEBUGFS_DIR'
Signed-off-by: NJason Baron <jbaron@redhat.com>
[ also made it probe "/debug" by default ]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090721181629.GA3094@redhat.com>

Add support to 'perf list' and 'perf stat' for kernel tracepoints. The
implementation creates a 'for_each_subsystem' and 'for_each_event' for
easy iteration over the tracepoints.
Signed-off-by: NJason Baron <jbaron@redhat.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <426129bf9fcc8ee63bb094cf736e7316a7dcd77a.1248190728.git.jbaron@redhat.com>