The maximum array sizes have been calculated on the basis of a maximum
SDU size of 255 bytes, whereas the actual maximum is 252 bytes.
Constructing a larger SDU will result in a BUG_ON in efx_mcdi_copyin.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

For NIC/System time synchonisation efx_mcdi_rpc needs to be split in
efx_mcdi_rpc_start and efx_mcdi_rpc_finish operations.
Signed-off-by: NStuart Hodgson <smhodgson@solarflare.com>
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Allows an extra channel to override the standard receive_skb handler
and also for extra non generic operations to be performed on remove.

Also set default rx strategy so only skbs can be delivered to the
PTP receive function.
Signed-off-by: NStuart Hodgson <smhodgson@solarflare.com>
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

The PTP channel will have its own RX queue even though it's not
a regular traffic channel.

Original work by Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: NStuart Hodgson <smhodgson@solarflare.com>
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Initial version by Stuart Hodgson <smhodgson@solarflare.com>

Some PHC device drivers may deliver PPS events with a significant
and variable delay, but still be able to measure precisely what
that delay is.

Add a pps_sub_ts() function for subtracting a delay from the
timestamp(s) in a PPS event, and a PTP event type (PTP_CLOCK_PPSUSR)
for which the caller provides a complete PPS event.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

When adding a blackhole or a prohibit route, they were handling like classic
routes. Moreover, it was only possible to add this kind of routes by specifying
an interface.

Bug already reported here:
  http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=498498

Before the patch:
  $ ip route add blackhole 2001::1/128
  RTNETLINK answers: No such device
  $ ip route add blackhole 2001::1/128 dev eth0
  $ ip -6 route | grep 2001
  2001::1 dev eth0  metric 1024

After:
  $ ip route add blackhole 2001::1/128
  $ ip -6 route | grep 2001
  blackhole 2001::1 dev lo  metric 1024  error -22

v2: wrong patch
v3: add a field fc_type in struct fib6_config to store RTN_* type
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch allows code to handle the PCIe AER capability.
The PCI callbacks for error handling/reset/recovery already exist in be2net
and have been tested with EEH/ppc.
This patch has been tested using the aer-inject tool.
Signed-off-by: NSathya Perla <sathya.perla@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It seems we need to provide ability for stacked devices
to use specific lock_class_key for sch->busylock

We could instead default l2tpeth tx_queue_len to 0 (no qdisc), but
a user might use a qdisc anyway.

(So same fixes are probably needed on non LLTX stacked drivers)

Noticed while stressing L2TPV3 setup :

======================================================
 [ INFO: possible circular locking dependency detected ]
 3.6.0-rc3+ #788 Not tainted
 -------------------------------------------------------
 netperf/4660 is trying to acquire lock:
  (l2tpsock){+.-...}, at: [<ffffffffa0208db2>] l2tp_xmit_skb+0x172/0xa50 [l2tp_core]

 but task is already holding lock:
  (&(&sch->busylock)->rlock){+.-...}, at: [<ffffffff81596595>] dev_queue_xmit+0xd75/0xe00

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (&(&sch->busylock)->rlock){+.-...}:
        [<ffffffff810a5df0>] lock_acquire+0x90/0x200
        [<ffffffff817499fc>] _raw_spin_lock_irqsave+0x4c/0x60
        [<ffffffff81074872>] __wake_up+0x32/0x70
        [<ffffffff8136d39e>] tty_wakeup+0x3e/0x80
        [<ffffffff81378fb3>] pty_write+0x73/0x80
        [<ffffffff8136cb4c>] tty_put_char+0x3c/0x40
        [<ffffffff813722b2>] process_echoes+0x142/0x330
        [<ffffffff813742ab>] n_tty_receive_buf+0x8fb/0x1230
        [<ffffffff813777b2>] flush_to_ldisc+0x142/0x1c0
        [<ffffffff81062818>] process_one_work+0x198/0x760
        [<ffffffff81063236>] worker_thread+0x186/0x4b0
        [<ffffffff810694d3>] kthread+0x93/0xa0
        [<ffffffff81753e24>] kernel_thread_helper+0x4/0x10

 -> #0 (l2tpsock){+.-...}:
        [<ffffffff810a5288>] __lock_acquire+0x1628/0x1b10
        [<ffffffff810a5df0>] lock_acquire+0x90/0x200
        [<ffffffff817498c1>] _raw_spin_lock+0x41/0x50
        [<ffffffffa0208db2>] l2tp_xmit_skb+0x172/0xa50 [l2tp_core]
        [<ffffffffa021a802>] l2tp_eth_dev_xmit+0x32/0x60 [l2tp_eth]
        [<ffffffff815952b2>] dev_hard_start_xmit+0x502/0xa70
        [<ffffffff815b63ce>] sch_direct_xmit+0xfe/0x290
        [<ffffffff81595a05>] dev_queue_xmit+0x1e5/0xe00
        [<ffffffff815d9d60>] ip_finish_output+0x3d0/0x890
        [<ffffffff815db019>] ip_output+0x59/0xf0
        [<ffffffff815da36d>] ip_local_out+0x2d/0xa0
        [<ffffffff815da5a3>] ip_queue_xmit+0x1c3/0x680
        [<ffffffff815f4192>] tcp_transmit_skb+0x402/0xa60
        [<ffffffff815f4a94>] tcp_write_xmit+0x1f4/0xa30
        [<ffffffff815f5300>] tcp_push_one+0x30/0x40
        [<ffffffff815e6672>] tcp_sendmsg+0xe82/0x1040
        [<ffffffff81614495>] inet_sendmsg+0x125/0x230
        [<ffffffff81576cdc>] sock_sendmsg+0xdc/0xf0
        [<ffffffff81579ece>] sys_sendto+0xfe/0x130
        [<ffffffff81752c92>] system_call_fastpath+0x16/0x1b
  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(&(&sch->busylock)->rlock);
                                lock(l2tpsock);
                                lock(&(&sch->busylock)->rlock);
   lock(l2tpsock);

  *** DEADLOCK ***

 5 locks held by netperf/4660:
  #0:  (sk_lock-AF_INET){+.+.+.}, at: [<ffffffff815e581c>] tcp_sendmsg+0x2c/0x1040
  #1:  (rcu_read_lock){.+.+..}, at: [<ffffffff815da3e0>] ip_queue_xmit+0x0/0x680
  #2:  (rcu_read_lock_bh){.+....}, at: [<ffffffff815d9ac5>] ip_finish_output+0x135/0x890
  #3:  (rcu_read_lock_bh){.+....}, at: [<ffffffff81595820>] dev_queue_xmit+0x0/0xe00
  #4:  (&(&sch->busylock)->rlock){+.-...}, at: [<ffffffff81596595>] dev_queue_xmit+0xd75/0xe00

 stack backtrace:
 Pid: 4660, comm: netperf Not tainted 3.6.0-rc3+ #788
 Call Trace:
  [<ffffffff8173dbf8>] print_circular_bug+0x1fb/0x20c
  [<ffffffff810a5288>] __lock_acquire+0x1628/0x1b10
  [<ffffffff810a334b>] ? check_usage+0x9b/0x4d0
  [<ffffffff810a3f44>] ? __lock_acquire+0x2e4/0x1b10
  [<ffffffff810a5df0>] lock_acquire+0x90/0x200
  [<ffffffffa0208db2>] ? l2tp_xmit_skb+0x172/0xa50 [l2tp_core]
  [<ffffffff817498c1>] _raw_spin_lock+0x41/0x50
  [<ffffffffa0208db2>] ? l2tp_xmit_skb+0x172/0xa50 [l2tp_core]
  [<ffffffffa0208db2>] l2tp_xmit_skb+0x172/0xa50 [l2tp_core]
  [<ffffffffa021a802>] l2tp_eth_dev_xmit+0x32/0x60 [l2tp_eth]
  [<ffffffff815952b2>] dev_hard_start_xmit+0x502/0xa70
  [<ffffffff81594e0e>] ? dev_hard_start_xmit+0x5e/0xa70
  [<ffffffff81595961>] ? dev_queue_xmit+0x141/0xe00
  [<ffffffff815b63ce>] sch_direct_xmit+0xfe/0x290
  [<ffffffff81595a05>] dev_queue_xmit+0x1e5/0xe00
  [<ffffffff81595820>] ? dev_hard_start_xmit+0xa70/0xa70
  [<ffffffff815d9d60>] ip_finish_output+0x3d0/0x890
  [<ffffffff815d9ac5>] ? ip_finish_output+0x135/0x890
  [<ffffffff815db019>] ip_output+0x59/0xf0
  [<ffffffff815da36d>] ip_local_out+0x2d/0xa0
  [<ffffffff815da5a3>] ip_queue_xmit+0x1c3/0x680
  [<ffffffff815da3e0>] ? ip_local_out+0xa0/0xa0
  [<ffffffff815f4192>] tcp_transmit_skb+0x402/0xa60
  [<ffffffff815fa25e>] ? tcp_md5_do_lookup+0x18e/0x1a0
  [<ffffffff815f4a94>] tcp_write_xmit+0x1f4/0xa30
  [<ffffffff815f5300>] tcp_push_one+0x30/0x40
  [<ffffffff815e6672>] tcp_sendmsg+0xe82/0x1040
  [<ffffffff81614495>] inet_sendmsg+0x125/0x230
  [<ffffffff81614370>] ? inet_create+0x6b0/0x6b0
  [<ffffffff8157e6e2>] ? sock_update_classid+0xc2/0x3b0
  [<ffffffff8157e750>] ? sock_update_classid+0x130/0x3b0
  [<ffffffff81576cdc>] sock_sendmsg+0xdc/0xf0
  [<ffffffff81162579>] ? fget_light+0x3f9/0x4f0
  [<ffffffff81579ece>] sys_sendto+0xfe/0x130
  [<ffffffff810a69ad>] ? trace_hardirqs_on+0xd/0x10
  [<ffffffff8174a0b0>] ? _raw_spin_unlock_irq+0x30/0x50
  [<ffffffff810757e3>] ? finish_task_switch+0x83/0xf0
  [<ffffffff810757a6>] ? finish_task_switch+0x46/0xf0
  [<ffffffff81752cb7>] ? sysret_check+0x1b/0x56
  [<ffffffff81752c92>] system_call_fastpath+0x16/0x1b
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Using list_move_tail() instead of list_del() + list_add_tail().

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes this build error:

net/ipv6/netfilter/nf_nat_l3proto_ipv6.c: In function 'nf_nat_ipv6_csum_recalc':
net/ipv6/netfilter/nf_nat_l3proto_ipv6.c:144:4: error: implicit declaration of function 'csum_ipv6_magic' [-Werror=implicit-function-declaration]
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Removed duplicate definition for SGE_PF_KDOORBELL, SGE_INT_ENABLE3,
PCIE_MEM_ACCESS_OFFSET registers.
Moved the register field definitions around the register definition.
Signed-off-by: NSantosh Rastapur <santosh@chelsio.com>
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Reviewed-by: NSivakumar Subramani <sivasu@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

cxgb4 driver has duplicate definitions of registers which will be removed. This
patch updates the RDMA/cxgb4 driver accordingly.
Signed-off-by: NSantosh Rastapur <santosh@chelsio.com>
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Reviewed-by: NSivakumar Subramani <sivasu@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently when the NIC duplex state is DUPLEX_UNKNOWN it is exported as
full through sysfs, this patch adds support for DUPLEX_UNKNOWN. It is
handled the same way as in ethtool.
Signed-off-by: NNikolay Aleksandrov <naleksan@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 5d65878d7031b6c39054b282faceff406bb2fda9.
The upper layers call usbnet_start_xmit() with a valid skb.
However cdc_ncm abuses this method by calling it with NULL
to trigger IO for the aggregated private skb holding erlier
packets. Until cdc_ncm is fixed, the check for NULL must
be reintroduced.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for genl "tcp_metrics". No locking
is changed, only that now we can unlink and delete
entries after grace period. We implement get/del for
single entry and dump to support show/flush filtering
in user space. Del without address attribute causes
flush for all addresses, sadly under genl_mutex.

v2:
- remove rcu_assign_pointer as suggested by Eric Dumazet,
it is not needed because there are no other writes under lock
- move the flushing code in tcp_metrics_flush_all

v3:
- remove synchronize_rcu on flush as suggested by Eric Dumazet
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove a for loop that does nothing in ixgbe_probe().
This is a remnant from when we had IO bars (compare to the ixgb code).
Signed-off-by: NEliezer Tamir <eliezer.tamir@linux.intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch add ethtool supports for Supported and Advertised Pause Frame,
based on Adapter Flow Control settings.
Signed-off-by: NAkeem G. Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Reduce skb truesize by 256 bytes.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Early release of i210 devices had the loopback test of the ethtool
self-test disabled. This patch enables the loopback test for i210 devices.
Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

lsof reports some of socket descriptors as "can't identify protocol" like:

    [yamato@localhost]/tmp% sudo lsof | grep dbus | grep iden
    dbus-daem   652          dbus    6u     sock ... 17812 can't identify protocol
    dbus-daem   652          dbus   34u     sock ... 24689 can't identify protocol
    dbus-daem   652          dbus   42u     sock ... 24739 can't identify protocol
    dbus-daem   652          dbus   48u     sock ... 22329 can't identify protocol
    ...

lsof cannot resolve the protocol used in a socket because procfs
doesn't provide the map between inode number on sockfs and protocol
type of the socket.

For improving the situation this patch adds an extended attribute named
'system.sockprotoname' in which the protocol name for
/proc/PID/fd/SOCKET is stored. So lsof can know the protocol for a
given /proc/PID/fd/SOCKET with getxattr system call.

A few weeks ago I submitted a patch for the same purpose. The patch
was introduced /proc/net/sockfs which enumerates inodes and protocols
of all sockets alive on a system. However, it was rejected because (1)
a global lock was needed, and (2) the layout of struct socket was
changed with the patch.

This patch doesn't use any global lock; and doesn't change the layout
of any structs.

In this patch, a protocol name is stored to dentry->d_name of sockfs
when new socket is associated with a file descriptor. Before this
patch dentry->d_name was not used; it was just filled with empty
string. lsof may use an extended attribute named
'system.sockprotoname' to retrieve the value of dentry->d_name.

It is nice if we can see the protocol name with ls -l
/proc/PID/fd. However, "socket:[#INODE]", the name format returned
from sockfs_dname() was already defined. To keep the compatibility
between kernel and user land, the extended attribute is used to
prepare the value of dentry->d_name.
Signed-off-by: NMasatake YAMATO <yamato@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Driver for the Microchip MRF24J40 802.15.4 WPAN module.
Signed-off-by: NAlan Ott <alan@signal11.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Stephen Rothwell says:

====================
After merging the final tree, today's linux-next build (powerpc
ppc44x_defconfig) failed like this:

net/built-in.o: In function `tcp_fastopen_ctx_free':
tcp_fastopen.c:(.text+0x5cc5c): undefined reference to `crypto_destroy_tfm'
net/built-in.o: In function `tcp_fastopen_reset_cipher':
(.text+0x5cccc): undefined reference to `crypto_alloc_base'
net/built-in.o: In function `tcp_fastopen_reset_cipher':
(.text+0x5cd6c): undefined reference to `crypto_destroy_tfm'

Presumably caused by commit 10467163 ("tcp: TCP Fast Open Server -
header & support functions") from the net-next tree.  I assume that some
dependency on the CRYPTO infrastructure is missing.

I have reverted commit 1bed966c ("Merge branch
'tcp_fastopen_server'") for today.
====================
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Using list_move_tail() instead of list_del() + list_add_tail().

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

usbnet_start_xmit() is always called with a valid skb
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use hash table to store ports of datapath. Allow 64K ports per switch.
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>

Use proportional rate reduction (PRR) algorithm to reduce cwnd in CWR state,
in addition to Recovery state. Retire the current rate-halving in CWR.
When losses are detected via ACKs in CWR state, the sender enters Recovery
state but the cwnd reduction continues and does not restart.

Rename and refactor cwnd reduction functions since both CWR and Recovery
use the same algorithm:
tcp_init_cwnd_reduction() is new and initiates reduction state variables.
tcp_cwnd_reduction() is previously tcp_update_cwnd_in_recovery().
tcp_ends_cwnd_reduction() is previously  tcp_complete_cwr().

The rate halving functions and logic such as tcp_cwnd_down(), tcp_min_cwnd(),
and the cwnd moderation inside tcp_enter_cwr() are removed. The unused
parameter, flag, in tcp_cwnd_reduction() is also removed.
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To prepare replacing rate halving with PRR algorithm in CWR state.
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To prepare replacing rate halving with PRR algorithm in CWR state.
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The rx_urb_size is set to the same value for every device
supported by this driver.  No need to keep a per-device
data structure to do that. Replacing with a macro constant.

This was the last device specific info, and removing it
allows us to delete the sierra_net_info_data struct.
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This merges (3f509c68 netfilter: nf_nat_sip: fix incorrect handling
of EBUSY for RTCP expectation) to Patrick McHardy's IPv6 NAT changes.

Despite being just a few bytes of code, they should still have proper
annotations.
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Since 'list_for_each_continue_rcu' has already been replaced by
'list_for_each_entry_continue_rcu', pass 'list_head' to nf_queue() as a
parameter can not benefit us any more.

This patch will replace 'list_head' with 'nf_hook_ops' as the parameter of
nf_queue() and __nf_queue() to save code.
Signed-off-by: NMichael Wang <wangyun@linux.vnet.ibm.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Since 'list_for_each_continue_rcu' has already been replaced by
'list_for_each_entry_continue_rcu', pass 'list_head' to nf_iterate() as a
parameter can not benefit us any more.

This patch will replace 'list_head' with 'nf_hook_ops' as the parameter of
nf_iterate() to save code.
Signed-off-by: NMichael Wang <wangyun@linux.vnet.ibm.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

It was scheduled to be removed for a long time.

Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netfilter@vger.kernel.org
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This patch adds the new nf_ct_timeout_lookup function to encapsulate
the timeout policy attachment that is called in the nf_conntrack_in
path.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This patch adds xt_ct_set_helper and xt_ct_set_timeout to reduce
the size of xt_ct_tg_check.

This aims to improve code mantainability by splitting xt_ct_tg_check
in smaller chunks.

Suggested by Eric Dumazet.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>