- 06 7月, 2018 2 次提交
-
-
由 Alex Deucher 提交于
So drivers can use them. This can be used to replace duplicate code in the drm subsystem. Acked-by: NChristian König <christian.koenig@amd.com> Acked-by: NBjorn Helgaas <bhelgaas@google.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Andrey Grodzovsky 提交于
Everything in the flush code path (i.e. waiting for SW queue to become empty) names with *_flush() and everything in the release code path names *_fini() This patch also effect the amdgpu and etnaviv drivers which use those functions. v2: Also pplay the change to vd3. Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com> Suggested-by: NChristian König <christian.koenig@amd.com> Acked-by: NLucas Stach <l.stach@pengutronix.de> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 29 6月, 2018 5 次提交
-
-
由 Jens Axboe 提交于
This was introduced more than a decade ago when sg chaining was added, but we never really caught anything with it. The scatterlist entry size can be critical, since drivers allocate it, so remove the magic member. Recently it's been triggering allocation stalls and failures in NVMe. Tested-by: NJordan Glover <Golden_Miller83@protonmail.ch> Acked-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Avi Kivity 提交于
io_pgetevents() will not change the signal mask. Mark it const to make it clear and to reduce the need for casts in user code. Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAvi Kivity <avi@scylladb.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> [hch: reapply the patch that got incorrectly reverted] Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Souptick Joarder 提交于
Commit 1c8f4220 ("mm: change return type to vm_fault_t") missed a conversion. It's not a big problem at present because mainline is still using typedef int vm_fault_t; Fixes: 1c8f4220 ("mm: change return type to vm_fault_t") Link: http://lkml.kernel.org/r/20180620172046.GA27894@jordon-HP-15-Notebook-PCSigned-off-by: NSouptick Joarder <jrdr.linux@gmail.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mikulas Patocka 提交于
In kernel 4.17 I removed some code from dm-bufio that did slab cache merging (commit 21bb1327: "dm bufio: remove code that merges slab caches") - both slab and slub support merging caches with identical attributes, so dm-bufio now just calls kmem_cache_create and relies on implicit merging. This uncovered a bug in the slub subsystem - if we delete a cache and immediatelly create another cache with the same attributes, it fails because of duplicate filename in /sys/kernel/slab/. The slub subsystem offloads freeing the cache to a workqueue - and if we create the new cache before the workqueue runs, it complains because of duplicate filename in sysfs. This patch fixes the bug by moving the call of kobject_del from sysfs_slab_remove_workfn to shutdown_cache. kobject_del must be called while we hold slab_mutex - so that the sysfs entry is deleted before a cache with the same attributes could be created. Running device-mapper-test-suite with: dmtest run --suite thin-provisioning -n /commit_failure_causes_fallback/ triggered: Buffer I/O error on dev dm-0, logical block 1572848, async page read device-mapper: thin: 253:1: metadata operation 'dm_pool_alloc_data_block' failed: error = -5 device-mapper: thin: 253:1: aborting current metadata transaction sysfs: cannot create duplicate filename '/kernel/slab/:a-0000144' CPU: 2 PID: 1037 Comm: kworker/u48:1 Not tainted 4.17.0.snitm+ #25 Hardware name: Supermicro SYS-1029P-WTR/X11DDW-L, BIOS 2.0a 12/06/2017 Workqueue: dm-thin do_worker [dm_thin_pool] Call Trace: dump_stack+0x5a/0x73 sysfs_warn_dup+0x58/0x70 sysfs_create_dir_ns+0x77/0x80 kobject_add_internal+0xba/0x2e0 kobject_init_and_add+0x70/0xb0 sysfs_slab_add+0xb1/0x250 __kmem_cache_create+0x116/0x150 create_cache+0xd9/0x1f0 kmem_cache_create_usercopy+0x1c1/0x250 kmem_cache_create+0x18/0x20 dm_bufio_client_create+0x1ae/0x410 [dm_bufio] dm_block_manager_create+0x5e/0x90 [dm_persistent_data] __create_persistent_data_objects+0x38/0x940 [dm_thin_pool] dm_pool_abort_metadata+0x64/0x90 [dm_thin_pool] metadata_operation_failed+0x59/0x100 [dm_thin_pool] alloc_data_block.isra.53+0x86/0x180 [dm_thin_pool] process_cell+0x2a3/0x550 [dm_thin_pool] do_worker+0x28d/0x8f0 [dm_thin_pool] process_one_work+0x171/0x370 worker_thread+0x49/0x3f0 kthread+0xf8/0x130 ret_from_fork+0x35/0x40 kobject_add_internal failed for :a-0000144 with -EEXIST, don't try to register things with the same name in the same directory. kmem_cache_create(dm_bufio_buffer-16) failed with error -17 Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1806151817130.6333@file01.intranet.prod.int.rdu2.redhat.comSigned-off-by: NMikulas Patocka <mpatocka@redhat.com> Reported-by: NMike Snitzer <snitzer@redhat.com> Tested-by: NMike Snitzer <snitzer@redhat.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
The poll() changes were not well thought out, and completely unexplained. They also caused a huge performance regression, because "->poll()" was no longer a trivial file operation that just called down to the underlying file operations, but instead did at least two indirect calls. Indirect calls are sadly slow now with the Spectre mitigation, but the performance problem could at least be largely mitigated by changing the "->get_poll_head()" operation to just have a per-file-descriptor pointer to the poll head instead. That gets rid of one of the new indirections. But that doesn't fix the new complexity that is completely unwarranted for the regular case. The (undocumented) reason for the poll() changes was some alleged AIO poll race fixing, but we don't make the common case slower and more complex for some uncommon special case, so this all really needs way more explanations and most likely a fundamental redesign. [ This revert is a revert of about 30 different commits, not reverted individually because that would just be unnecessarily messy - Linus ] Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 28 6月, 2018 2 次提交
-
-
由 Jernej Skrabec 提交于
Function is useful when drm_of_find_possible_crtcs() can't be used and custom parsing is needed. This can happen for example when there is a node with multiple muxes between crtc and encoder. Reviewed-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net> [maxime: change the function to have a consistent prefix] Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-22-jernej.skrabec@siol.net
-
由 Jernej Skrabec 提交于
TCON TOP main purpose is to configure whole display pipeline. It determines relationships between mixers and TCONs, selects source TCON for HDMI, muxes LCD and TV encoder GPIO output, selects TV encoder clock source and contains additional TV TCON and DSI gates. Reviewed-by: NRob Herring <robh@kernel.org> Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-5-jernej.skrabec@siol.net
-
- 27 6月, 2018 1 次提交
-
-
由 Keith Busch 提交于
A device may have boundary restrictions where the number of sectors between boundaries exceeds its max transfer size. In this case, we need to cap the max size to the smaller of the two limits. Reported-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com> Tested-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com> Cc: <stable@vger.kernel.org> Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NKeith Busch <keith.busch@intel.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 25 6月, 2018 5 次提交
-
-
由 Arnd Bergmann 提交于
gcc-8 warns for every single definition of a system call entry point, e.g.: include/linux/compat.h:56:18: error: 'compat_sys_rt_sigprocmask' alias between functions of incompatible types 'long int(int, compat_sigset_t *, compat_sigset_t *, compat_size_t)' {aka 'long int(int, struct <anonymous> *, struct <anonymous> *, unsigned int)'} and 'long int(long int, long int, long int, long int)' [-Werror=attribute-alias] asmlinkage long compat_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__))\ ^~~~~~~~~~ include/linux/compat.h:45:2: note: in expansion of macro 'COMPAT_SYSCALL_DEFINEx' COMPAT_SYSCALL_DEFINEx(4, _##name, __VA_ARGS__) ^~~~~~~~~~~~~~~~~~~~~~ kernel/signal.c:2601:1: note: in expansion of macro 'COMPAT_SYSCALL_DEFINE4' COMPAT_SYSCALL_DEFINE4(rt_sigprocmask, int, how, compat_sigset_t __user *, nset, ^~~~~~~~~~~~~~~~~~~~~~ include/linux/compat.h:60:18: note: aliased declaration here asmlinkage long compat_SyS##name(__MAP(x,__SC_LONG,__VA_ARGS__))\ ^~~~~~~~~~ The new warning seems reasonable in principle, but it doesn't help us here, since we rely on the type mismatch to sanitize the system call arguments. After I reported this as GCC PR82435, a new -Wno-attribute-alias option was added that could be used to turn the warning off globally on the command line, but I'd prefer to do it a little more fine-grained. Interestingly, turning a warning off and on again inside of a single macro doesn't always work, in this case I had to add an extra statement inbetween and decided to copy the __SC_TEST one from the native syscall to the compat syscall macro. See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83256 for more details about this. [paul.burton@mips.com: - Rebase atop current master. - Split GCC & version arguments to __diag_ignore() in order to match changes to the preceding patch. - Add the comment argument to match the preceding patch.] Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82435Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NPaul Burton <paul.burton@mips.com> Tested-by: NChristophe Leroy <christophe.leroy@c-s.fr> Tested-by: NStafford Horne <shorne@gmail.com> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Arnd Bergmann 提交于
I have occasionally run into a situation where it would make sense to control a compiler warning from a source file rather than doing so from a Makefile using the $(cc-disable-warning, ...) or $(cc-option, ...) helpers. The approach here is similar to what glibc uses, using __diag() and related macros to encapsulate a _Pragma("GCC diagnostic ...") statement that gets turned into the respective "#pragma GCC diagnostic ..." by the preprocessor when the macro gets expanded. Like glibc, I also have an argument to pass the affected compiler version, but decided to actually evaluate that one. For now, this supports GCC_4_6, GCC_4_7, GCC_4_8, GCC_4_9, GCC_5, GCC_6, GCC_7, GCC_8 and GCC_9. Adding support for CLANG_5 and other interesting versions is straightforward here. GNU compilers starting with gcc-4.2 could support it in principle, but "#pragma GCC diagnostic push" was only added in gcc-4.6, so it seems simpler to not deal with those at all. The same versions show a large number of warnings already, so it seems easier to just leave it at that and not do a more fine-grained control for them. The use cases I found so far include: - turning off the gcc-8 -Wattribute-alias warning inside of the SYSCALL_DEFINEx() macro without having to do it globally. - Reducing the build time for a simple re-make after a change, once we move the warnings from ./Makefile and ./scripts/Makefile.extrawarn into linux/compiler.h - More control over the warnings based on other configurations, using preprocessor syntax instead of Makefile syntax. This should make it easier for the average developer to understand and change things. - Adding an easy way to turn the W=1 option on unconditionally for a subdirectory or a specific file. This has been requested by several developers in the past that want to have their subsystems W=1 clean. - Integrating clang better into the build systems. Clang supports more warnings than GCC, and we probably want to classify them as default, W=1, W=2 etc, but there are cases in which the warnings should be classified differently due to excessive false positives from one or the other compiler. - Adding a way to turn the default warnings into errors (e.g. using a new "make E=0" tag) while not also turning the W=1 warnings into errors. This patch for now just adds the minimal infrastructure in order to do the first of the list above. As the #pragma GCC diagnostic takes precedence over command line options, the next step would be to convert a lot of the individual Makefiles that set nonstandard options to use __diag() instead. [paul.burton@mips.com: - Rebase atop current master. - Add __diag_GCC, or more generally __diag_<compiler>, abstraction to avoid code outside of linux/compiler-gcc.h needing to duplicate knowledge about different GCC versions. - Add a comment argument to __diag_{ignore,warn,error} which isn't used in the expansion of the macros but serves to push people to document the reason for using them - per feedback from Kees Cook. - Translate severity to GCC-specific pragmas in linux/compiler-gcc.h rather than using GCC-specific in linux/compiler_types.h. - Drop all but GCC 8 macros, since we only need to define macros for versions that we need to introduce pragmas for, and as of this series that's just GCC 8. - Capitalize comments in linux/compiler-gcc.h to match the style of the rest of the file. - Line up macro definitions with tabs in linux/compiler-gcc.h.] Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NPaul Burton <paul.burton@mips.com> Tested-by: NChristophe Leroy <christophe.leroy@c-s.fr> Tested-by: NStafford Horne <shorne@gmail.com> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Heikki Krogerus 提交于
Sometimes memory resource may be overlapping with SystemMemory Operation Region by design, for example if the memory region is used as a mailbox for communication with a firmware in the system. One occasion of such mailboxes is USB Type-C Connector System Software Interface (UCSI). With regions like that, it is important that the driver is able to map the memory with the requirements it has. For example, the driver should be allowed to map the memory as non-cached memory. However, if the operation region has been accessed before the driver has mapped the memory, the memory has been marked as write-back by the time the driver is loaded. That means the driver will fail to map the memory if it expects non-cached memory. To work around the problem, introducing helper that the drivers can use to temporarily deactivate (unmap) SystemMemory Operation Regions that overlap with their IO memory. Fixes: 8243edf4 ("usb: typec: ucsi: Add ACPI driver") Cc: stable@vger.kernel.org Reviewed-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: NHeikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Viresh Kumar 提交于
The DT node passed here isn't necessarily an OPP node, as this routine can also be used for cases where the "required-opps" property is present directly in the device's node. Rename it. This also removes a stale comment. Acked-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Viresh Kumar 提交于
of_genpd_opp_to_performance_state() should return 0 for errors, but the dummy routine isn't doing that. Fix it. Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> Acked-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 24 6月, 2018 1 次提交
-
-
由 Phil Reid 提交于
linux/iio/buffer-dma.h was not updated to when length was changed to unsigned int. Fixes: c043ec1c ("iio:buffer: make length types match kfifo types") Signed-off-by: NPhil Reid <preid@electromag.com.au> Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>
-
- 23 6月, 2018 3 次提交
-
-
由 Eric Anholt 提交于
Drivers such as vc4 don't initialize mode_config.funcs until later in initialization, but we know they're atomic since they've got the flag set. This avoids oopsing on dereferencing funcs in the new atomic methods sanity checks. I moved the atomic check function down below the core flag check, to avoid needing a prototype. Signed-off-by: NEric Anholt <eric@anholt.net> Fixes: ba1f665f ("drm: Add checks for atomic_[duplicate/destroy]_state with atomic drivers") Link: https://patchwork.freedesktop.org/patch/msgid/20180621195428.17447-1-eric@anholt.netReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Jan Kara 提交于
syzbot is reporting NULL pointer dereference at wb_workfn() [1] due to wb->bdi->dev being NULL. And Dmitry confirmed that wb->state was WB_shutting_down after wb->bdi->dev became NULL. This indicates that unregister_bdi() failed to call wb_shutdown() on one of wb objects. The problem is in cgwb_bdi_unregister() which does cgwb_kill() and thus drops bdi's reference to wb structures before going through the list of wbs again and calling wb_shutdown() on each of them. This way the loop iterating through all wbs can easily miss a wb if that wb has already passed through cgwb_remove_from_bdi_list() called from wb_shutdown() from cgwb_release_workfn() and as a result fully shutdown bdi although wb_workfn() for this wb structure is still running. In fact there are also other ways cgwb_bdi_unregister() can race with cgwb_release_workfn() leading e.g. to use-after-free issues: CPU1 CPU2 cgwb_bdi_unregister() cgwb_kill(*slot); cgwb_release() queue_work(cgwb_release_wq, &wb->release_work); cgwb_release_workfn() wb = list_first_entry(&bdi->wb_list, ...) spin_unlock_irq(&cgwb_lock); wb_shutdown(wb); ... kfree_rcu(wb, rcu); wb_shutdown(wb); -> oops use-after-free We solve these issues by synchronizing writeback structure shutdown from cgwb_bdi_unregister() with cgwb_release_workfn() using a new mutex. That way we also no longer need synchronization using WB_shutting_down as the mutex provides it for CONFIG_CGROUP_WRITEBACK case and without CONFIG_CGROUP_WRITEBACK wb_shutdown() can be called only once from bdi_unregister(). Reported-by: Nsyzbot <syzbot+4a7438e774b21ddd8eca@syzkaller.appspotmail.com> Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Will Deacon 提交于
When delivering a signal to a task that is using rseq, we call into __rseq_handle_notify_resume() so that the registers pushed in the sigframe are updated to reflect the state of the restartable sequence (for example, ensuring that the signal returns to the abort handler if necessary). However, if the rseq management fails due to an unrecoverable fault when accessing userspace or certain combinations of RSEQ_CS_* flags, then we will attempt to deliver a SIGSEGV. This has the potential for infinite recursion if the rseq code continuously fails on signal delivery. Avoid this problem by using force_sigsegv() instead of force_sig(), which is explicitly designed to reset the SEGV handler to SIG_DFL in the case of a recursive fault. In doing so, remove rseq_signal_deliver() from the internal rseq API and have an optional struct ksignal * parameter to rseq_handle_notify_resume() instead. Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: peterz@infradead.org Cc: paulmck@linux.vnet.ibm.com Cc: boqun.feng@gmail.com Link: https://lkml.kernel.org/r/1529664307-983-1-git-send-email-will.deacon@arm.com
-
- 22 6月, 2018 5 次提交
-
-
由 John Garry 提交于
Function irq_desc_get_msi_desc() is not referenced in the kernel (and does not seem to have been referenced since e39758e0, 3 years ago), so delete it. Signed-off-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: <marc.zyngier@arm.com> Cc: <will.deacon@arm.com> Cc: <kstewart@linuxfoundation.org> Cc: <julien.thierry@arm.com> Cc: <andrew@lunn.ch> Cc: <trivial@kernel.org> Link: https://lkml.kernel.org/r/1529667333-92959-1-git-send-email-john.garry@huawei.com
-
由 Marc Zyngier 提交于
Debug is missing the IRQCHIP_SUPPORTS_LEVEL_MSI debug entry, making debugfs slightly less useful. Take this opportunity to also add a missing comment in the definition of IRQCHIP_SUPPORTS_LEVEL_MSI. Fixes: 6988e0e0 ("genirq/msi: Limit level-triggered MSI to platform devices") Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Yang Yingliang <yangyingliang@huawei.com> Cc: Sumit Garg <sumit.garg@linaro.org> Link: https://lkml.kernel.org/r/20180622095254.5906-2-marc.zyngier@arm.com
-
由 Steven Rostedt (VMware) 提交于
One of my tests compiles the kernel with gcc 4.5.3, and I hit the following build error: include/linux/semaphore.h: In function 'sema_init': include/linux/semaphore.h:35:17: error: unknown field 'val' specified in initializer include/linux/semaphore.h:35:17: warning: missing braces around initializer include/linux/semaphore.h:35:17: warning: (near initialization for '(anonymous).raw_lock.<anonymous>.val') I bisected it down to: 625e88be ("locking/qspinlock: Merge 'struct __qspinlock' into 'struct qspinlock'") ... which makes qspinlock have an anonymous union, which makes initializing it special for older compilers. By adding strategic brackets, it makes the build happy again. Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: NWaiman Long <longman@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Fixes: 625e88be ("locking/qspinlock: Merge 'struct __qspinlock' into 'struct qspinlock'") Link: http://lkml.kernel.org/r/20180621203526.172ab5c4@vmware.local.homeSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Eric Anholt 提交于
This makes it more likely that the docs stay updated with the code. Signed-off-by: NEric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180606190431.1833-1-eric@anholt.netReviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
-
由 Ville Syrjälä 提交于
The meaning of the mode_config max_width/height fields has not been entirely clear. They are used both as the max framebuffer dimensions, and they are also used by drm_mode_getconnector() to filter out any mode whose hdisplay/vdisplay exceed those limits. Let's put it in writing that max_width/height only refrer to the max framebuffer dimensions, and should those be higher than the hardware limits for display timings the driver must validate the latter using some other means. We'll keep the max_width/height usage in drm_mode_getconnector() because setcrtc treats hdisplay/vdisplay also as the primary plane width, and having a plane bigger than the max fb size doesn't make much sense (if we ignore scaling that is). It all works out fine as long as the max fb dimensions are at least equal to the max timing limits. If the opposite were true we may want to rethink what drm_mode_getconnector() does. Maybe do the mode filtering only for non-atomic userspace? Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180615173939.11353-1-ville.syrjala@linux.intel.comReviewed-by: NManasi Navare <manasi.d.navare@intel.com>
-
- 21 6月, 2018 5 次提交
-
-
由 Wei Wang 提交于
Signed-off-by: NWei Wang <wvw@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@suse.de> Cc: Crt Mori <cmo@melexis.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: gregkh@linuxfoundation.org Cc: wei.vince.wang@gmail.com Link: https://lkml.kernel.org/lkml/20180424212241.16013-1-wvw@google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 mike.travis@hpe.com 提交于
Add a new function to "adjust" the current fixed UV memory block size of 2GB so it can be changed to a different physical boundary. This is out of necessity so arch dependent code can accommodate specific BIOS requirements which can align these new PMEM modules at less than the default boundaries. A "set order" type of function was used to insure that the memory block size will be a power of two value without requiring a validity check. 64GB was chosen as the upper limit for memory block size values to accommodate upcoming 4PB systems which have 6 more bits of physical address space (46 becoming 52). Signed-off-by: NMike Travis <mike.travis@hpe.com> Reviewed-by: NAndrew Banman <andrew.banman@hpe.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russ Anderson <russ.anderson@hpe.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dan.j.williams@intel.com Cc: jgross@suse.com Cc: kirill.shutemov@linux.intel.com Cc: mhocko@suse.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/lkml/20180524201711.609546602@stormcage.americas.sgi.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Mathieu Desnoyers 提交于
Considering that we explicitly forbid system calls in rseq critical sections, it is not valid to issue a fork or clone system call within a rseq critical section, so rseq_fork() is not required to restart an active rseq c.s. in the child process. Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ben Maurer <bmaurer@fb.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Lameter <cl@linux.com> Cc: Dave Watson <davejwatson@fb.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Paul E . McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-api@vger.kernel.org Cc: linux-kselftest@vger.kernel.org Link: https://lore.kernel.org/lkml/20180619133230.4087-4-mathieu.desnoyers@efficios.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Eric Dumazet 提交于
After commit 9facc336 ("bpf: reject any prog that failed read-only lock") offsetof(struct bpf_binary_header, image) became 3 instead of 4, breaking powerpc BPF badly, since instructions need to be word aligned. Fixes: 9facc336 ("bpf: reject any prog that failed read-only lock") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Doron Roberts-Kedes 提交于
If NBD_DISCONNECT_ON_CLOSE is set on a device, then the driver will issue a disconnect from nbd_release if the device has no remaining bdev->bd_openers. Fix ret val so reconfigure with only setting the flag succeeds. Reviewed-by: NJosef Bacik <josef@toxicpanda.com> Signed-off-by: NDoron Roberts-Kedes <doronrk@fb.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 20 6月, 2018 7 次提交
-
-
由 Liviu Dudau 提交于
Due to the fact that writeback connectors behave in a special way in DRM (they always report being disconnected) we might confuse some userspace. Add a client capability for writeback connectors that will filter them out for clients that don't understand the capability. Changelog: - only accept the capability if the client has already set the DRM_CLIENT_CAP_ATOMIC one. Cc: Sean Paul <seanpaul@chromium.org> Cc: Brian Starkey <brian.starkey@arm.com> Signed-off-by: NLiviu Dudau <liviu.dudau@arm.com> Reviewed-by: NEric Anholt <eric@anholt.net> Reviewed-by: NBrian Starkey <brian.starkey@arm.com> Link: https://patchwork.freedesktop.org/patch/229038/
-
由 Brian Starkey 提交于
Add the WRITEBACK_OUT_FENCE_PTR property to writeback connectors, to enable userspace to get a fence which will signal once the writeback is complete. It is not allowed to request an out-fence without a framebuffer attached to the connector. A timeline is added to drm_writeback_connector for use by the writeback out-fences. In the case of a commit failure or DRM_MODE_ATOMIC_TEST_ONLY, the fence is set to -1. Changes from v2: - Rebase onto Gustavo Padovan's v9 explicit sync series - Change out_fence_ptr type to s32 __user * - Set *out_fence_ptr to -1 in drm_atomic_connector_set_property - Store fence in drm_writeback_job Gustavo Padovan: - Move out_fence_ptr out of connector_state - Signal fence from drm_writeback_signal_completion instead of in driver directly Changes from v3: - Rebase onto commit 7e9081c5 ("drm/fence: fix memory overwrite when setting out_fence fd") (change out_fence_ptr to s32 __user *, for real this time.) - Update documentation around WRITEBACK_OUT_FENCE_PTR Signed-off-by: NBrian Starkey <brian.starkey@arm.com> [rebased and fixed conflicts] Signed-off-by: NMihail Atanassov <mihail.atanassov@arm.com> Signed-off-by: NLiviu Dudau <liviu.dudau@arm.com> Reviewed-by: NEric Anholt <eric@anholt.net> Reviewed-by: NSean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/229036/
-
由 Brian Starkey 提交于
Writeback connectors represent writeback engines which can write the CRTC output to a memory framebuffer. Add a writeback connector type and related support functions. Drivers should initialize a writeback connector with drm_writeback_connector_init() which takes care of setting up all the writeback-specific details on top of the normal functionality of drm_connector_init(). Writeback connectors have a WRITEBACK_FB_ID property, used to set the output framebuffer, and a WRITEBACK_PIXEL_FORMATS blob used to expose the supported writeback formats to userspace. When a framebuffer is attached to a writeback connector with the WRITEBACK_FB_ID property, it is used only once (for the commit in which it was included), and userspace can never read back the value of WRITEBACK_FB_ID. WRITEBACK_FB_ID can only be set if the connector is attached to a CRTC. Changes since v1: - Added drm_writeback.c + documentation - Added helper to initialize writeback connector in one go - Added core checks - Squashed into a single commit - Dropped the client cap - Writeback framebuffers are no longer persistent Changes since v2: Daniel Vetter: - Subclass drm_connector to drm_writeback_connector - Relax check to allow CRTC to be set without an FB - Add some writeback_ prefixes - Drop PIXEL_FORMATS_SIZE property, as it was unnecessary Gustavo Padovan: - Add drm_writeback_job to handle writeback signalling centrally Changes since v3: - Rebased - Rename PIXEL_FORMATS -> WRITEBACK_PIXEL_FORMATS Chances since v4: - Embed a drm_encoder inside the drm_writeback_connector to reduce the amount of boilerplate code required from the drivers that are using it. Changes since v5: - Added Rob Clark's atomic_commit() vfunc to connector helper funcs, so that writeback jobs are committed from atomic helpers - Updated create_writeback_properties() signature to return an error code rather than a boolean false for failure. - Free writeback job with the connector state rather than when doing the cleanup_work() Changes since v7: - fix extraneous use of out_fence that is only introduced in a subsequent patch. Changes since v8: - whitespace changes pull from subsequent patch Changes since v9: - Revert the v6 changes that free the writeback job in the connector state cleanup and return to doing it in the cleanup_work() function Signed-off-by: NBrian Starkey <brian.starkey@arm.com> [rebased and fixed conflicts] Signed-off-by: NMihail Atanassov <mihail.atanassov@arm.com> [rebased and added atomic_commit() vfunc for writeback jobs] Signed-off-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NLiviu Dudau <liviu.dudau@arm.com> Reviewed-by: NEric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/229037/
-
由 Christian König 提交于
Neither used nor correctly implemented anywhere. Just completely remove the interface. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Acked-by: NSumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/226645/
-
由 Christian König 提交于
The device parameter is completely unused because it is available in the attachment structure as well. v2: fix kerneldoc as well Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/226643/
-
由 Brian Norris 提交于
Commit bca5f557 "ACPI / processor: Make acpi_processor_ppc_has_changed() void" changed one of the declarations of acpi_processor_ppc_has_changed() to return void, but the !CPU_FREQ version still returns int. Let's return void to be consistent. Fixes: bca5f557 "ACPI / processor: Make acpi_processor_ppc_has_changed() void" Signed-off-by: NBrian Norris <briannorris@chromium.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Eric Dumazet 提交于
syzbot reported use after free that is caused by fib6_info being freed without a proper RCU grace period. CPU: 0 PID: 1407 Comm: udevd Not tainted 4.17.0+ #39 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433 __read_once_size include/linux/compiler.h:188 [inline] find_rr_leaf net/ipv6/route.c:705 [inline] rt6_select net/ipv6/route.c:761 [inline] fib6_table_lookup+0x12b7/0x14d0 net/ipv6/route.c:1823 ip6_pol_route+0x1c2/0x1020 net/ipv6/route.c:1856 ip6_pol_route_output+0x54/0x70 net/ipv6/route.c:2082 fib6_rule_lookup+0x211/0x6d0 net/ipv6/fib6_rules.c:122 ip6_route_output_flags+0x2c5/0x350 net/ipv6/route.c:2110 ip6_route_output include/net/ip6_route.h:82 [inline] icmpv6_xrlim_allow net/ipv6/icmp.c:211 [inline] icmp6_send+0x147c/0x2da0 net/ipv6/icmp.c:535 icmpv6_send+0x17a/0x300 net/ipv6/ip6_icmp.c:43 ip6_link_failure+0xa5/0x790 net/ipv6/route.c:2244 dst_link_failure include/net/dst.h:427 [inline] ndisc_error_report+0xd1/0x1c0 net/ipv6/ndisc.c:695 neigh_invalidate+0x246/0x550 net/core/neighbour.c:892 neigh_timer_handler+0xaf9/0xde0 net/core/neighbour.c:978 call_timer_fn+0x230/0x940 kernel/time/timer.c:1326 expire_timers kernel/time/timer.c:1363 [inline] __run_timers+0x79e/0xc50 kernel/time/timer.c:1666 run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692 __do_softirq+0x2e0/0xaf5 kernel/softirq.c:284 invoke_softirq kernel/softirq.c:364 [inline] irq_exit+0x1d1/0x200 kernel/softirq.c:404 exiting_irq arch/x86/include/asm/apic.h:527 [inline] smp_apic_timer_interrupt+0x17e/0x710 arch/x86/kernel/apic/apic.c:1052 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:863 </IRQ> RIP: 0010:strlen+0x5e/0xa0 lib/string.c:482 Code: 24 00 74 3b 48 bb 00 00 00 00 00 fc ff df 4c 89 e0 48 83 c0 01 48 89 c2 48 89 c1 48 c1 ea 03 83 e1 07 0f b6 14 1a 38 ca 7f 04 <84> d2 75 23 80 38 00 75 de 48 83 c4 08 4c 29 e0 5b 41 5c 5d c3 48 RSP: 0018:ffff8801af117850 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: ffff880197f53bd0 RBX: dffffc0000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff81c5b06c RDI: ffff880197f53bc0 RBP: ffff8801af117868 R08: ffff88019a976540 R09: 0000000000000000 R10: ffff88019a976540 R11: 0000000000000000 R12: ffff880197f53bc0 R13: ffff880197f53bc0 R14: ffffffff899e4e90 R15: ffff8801d91c6a00 strlen include/linux/string.h:267 [inline] getname_kernel+0x24/0x370 fs/namei.c:218 open_exec+0x17/0x70 fs/exec.c:882 load_elf_binary+0x968/0x5610 fs/binfmt_elf.c:780 search_binary_handler+0x17d/0x570 fs/exec.c:1653 exec_binprm fs/exec.c:1695 [inline] __do_execve_file.isra.35+0x16fe/0x2710 fs/exec.c:1819 do_execveat_common fs/exec.c:1866 [inline] do_execve fs/exec.c:1883 [inline] __do_sys_execve fs/exec.c:1964 [inline] __se_sys_execve fs/exec.c:1959 [inline] __x64_sys_execve+0x8f/0xc0 fs/exec.c:1959 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f1576a46207 Code: 77 19 f4 48 89 d7 44 89 c0 0f 05 48 3d 00 f0 ff ff 76 e0 f7 d8 64 41 89 01 eb d8 f7 d8 64 41 89 01 eb df b8 3b 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 02 f3 c3 48 8b 15 00 8c 2d 00 f7 d8 64 89 02 RSP: 002b:00007ffff2784568 EFLAGS: 00000202 ORIG_RAX: 000000000000003b RAX: ffffffffffffffda RBX: 00000000ffffffff RCX: 00007f1576a46207 RDX: 0000000001215b10 RSI: 00007ffff2784660 RDI: 00007ffff2785670 RBP: 0000000000625500 R08: 000000000000589c R09: 000000000000589c R10: 0000000000000000 R11: 0000000000000202 R12: 0000000001215b10 R13: 0000000000000007 R14: 0000000001204250 R15: 0000000000000005 Allocated by task 12188: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553 kmem_cache_alloc_trace+0x152/0x780 mm/slab.c:3620 kmalloc include/linux/slab.h:513 [inline] kzalloc include/linux/slab.h:706 [inline] fib6_info_alloc+0xbb/0x280 net/ipv6/ip6_fib.c:152 ip6_route_info_create+0x782/0x2b50 net/ipv6/route.c:3013 ip6_route_add+0x23/0xb0 net/ipv6/route.c:3154 ipv6_route_ioctl+0x5a5/0x760 net/ipv6/route.c:3660 inet6_ioctl+0x100/0x1f0 net/ipv6/af_inet6.c:546 sock_do_ioctl+0xe4/0x3e0 net/socket.c:973 sock_ioctl+0x30d/0x680 net/socket.c:1097 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:500 [inline] do_vfs_ioctl+0x1cf/0x16f0 fs/ioctl.c:684 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701 __do_sys_ioctl fs/ioctl.c:708 [inline] __se_sys_ioctl fs/ioctl.c:706 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:706 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 1402: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528 __cache_free mm/slab.c:3498 [inline] kfree+0xd9/0x260 mm/slab.c:3813 fib6_info_destroy+0x29b/0x350 net/ipv6/ip6_fib.c:207 fib6_info_release include/net/ip6_fib.h:286 [inline] __ip6_del_rt_siblings net/ipv6/route.c:3235 [inline] ip6_route_del+0x11c4/0x13b0 net/ipv6/route.c:3316 ipv6_route_ioctl+0x616/0x760 net/ipv6/route.c:3663 inet6_ioctl+0x100/0x1f0 net/ipv6/af_inet6.c:546 sock_do_ioctl+0xe4/0x3e0 net/socket.c:973 sock_ioctl+0x30d/0x680 net/socket.c:1097 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:500 [inline] do_vfs_ioctl+0x1cf/0x16f0 fs/ioctl.c:684 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701 __do_sys_ioctl fs/ioctl.c:708 [inline] __se_sys_ioctl fs/ioctl.c:706 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:706 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8801b5df2580 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 8 bytes inside of 256-byte region [ffff8801b5df2580, ffff8801b5df2680) The buggy address belongs to the page: page:ffffea0006d77c80 count:1 mapcount:0 mapping:ffff8801da8007c0 index:0xffff8801b5df2e40 flags: 0x2fffc0000000100(slab) raw: 02fffc0000000100 ffffea0006c5cc48 ffffea0007363308 ffff8801da8007c0 raw: ffff8801b5df2e40 ffff8801b5df2080 0000000100000006 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801b5df2480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8801b5df2500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc > ffff8801b5df2580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8801b5df2600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8801b5df2680: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb Fixes: a64efe14 ("net/ipv6: introduce fib6_info struct and helpers") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: David Ahern <dsahern@gmail.com> Reported-by: syzbot+9e6d75e3edef427ee888@syzkaller.appspotmail.com Acked-by: NDavid Ahern <dsahern@gmail.com> Tested-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 6月, 2018 4 次提交
-
-
由 Trond Myklebust 提交于
We do not want to have rpciod threads perform recursive calls into the RPC layer since that can deadlock. In particular, having to wait for a layoutget can be nasty... We want rather to defer scheduling those retries until we're in the rpc_release() callback, since that is called from the nfsiod workqueue. Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
-
由 Roger Pau Monne 提交于
Use a global variable to store the start flags for both PV and PVH. This allows the xen_initial_domain macro to work properly on PVH. Note that ARM is also switched to use the new variable. Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: NRoger Pau Monné <roger.pau@citrix.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
Generally target core and TCMUser seem to work fine for tape devices and media changers. But there is at least one situation where TCMUser is not able to support sequential access device emulation correctly. The situation is when an initiator sends a SCSI READ CDB with a length that is greater than the length of the tape block to read. We can distinguish two subcases: A) The initiator sent the READ CDB with the SILI bit being set. In this case the sequential access device has to transfer the data from the tape block (only the length of the tape block) and transmit a good status. The current interface between TCMUser and the userspace does not support reduction of the read data size by the userspace program. The patch below fixes this subcase by allowing the userspace program to specify a reduced data size in read direction. B) The initiator sent the READ CDB with the SILI bit not being set. In this case the sequential access device has to transfer the data from the tape block as in A), but additionally has to transmit CHECK CONDITION with the ILI bit set and NO SENSE in the sensebytes. The information field in the sensebytes must contain the residual count. With the below patch a user space program can specify the real read data length and appropriate sensebytes. TCMUser then uses the se_cmd flag SCF_TREAT_READ_AS_NORMAL, to force target core to transmit the real data size and the sensebytes. Note: the flag SCF_TREAT_READ_AS_NORMAL is introduced by Lee Duncan's patch "[PATCH v4] target: transport should handle st FM/EOM/ILI reads" from Tue, 15 May 2018 18:25:24 -0700. Signed-off-by: NBodo Stroesser <bstroesser@ts.fujitsu.com> Acked-by: NMike Christie <mchristi@redhat.com> Reviewed-by: NLee Duncan <lduncan@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 José Roberto de Souza 提交于
Amber Lake uses the same gen graphics as Kaby Lake, including a id that were previously marked as reserved on Kaby Lake, but that now is moved to AML page. So, let's just move it to AML macro that will feed into KBL macro just to keep it better organized to make easier future code review but it will be handled as a KBL. Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com> Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180614233720.30517-2-jose.souza@intel.com
-