- 07 5月, 2014 10 次提交
-
-
由 Lv Zheng 提交于
With the NULL entry sanity check implemented, the XSDT validation is useless because: 1. If XSDT contains NULL entries, it can be bypassed by the new sanity check mechanism; 2. If RSDP contains a bad XSDT address, invoking XSDT validation will still lead to a kernel crash. This patch deletes the old XSDT validation solution and thus enables the new NULL entry sanity check solution. Note that if there are reports reporting regressions caused by the enabling of the new feature and disabling of the old feature, this commit should be bisected and reverted. Lv Zheng. References: https://bugzilla.kernel.org/show_bug.cgi?id=73911 References: https://bugs.archlinux.org/task/39811Signed-off-by: NLv Zheng <lv.zheng@intel.com> Reported-and-tested-by: NBruce Chiarelli <mano155@gmail.com> Reported-and-tested-by: NSpyros Stathopoulos <spystath@gmail.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Lv Zheng 提交于
It is reported that there are buggy BIOSes in the world: AMI uses an XSDT compiler for early BIOSes, this compiler will generate XSDT with a NULL entry. The affected BIOS versions are "AMI BIOS F2-F4". Original solution on Linux is to use an alternative heathy root table instead of the ill one. This commit is: Commit: 671cc68d Subject: ACPICA: Back port and refine validation of the XSDT root table. This is an example of such XSDT dumped from B85-HD3 (AMI F3 BIOS): [000h 0000 4] Signature : "XSDT" [Extended System Description Table] [004h 0004 4] Table Length : 00000074 [008h 0008 1] Revision : 01 [009h 0009 1] Checksum : 18 [00Ah 0010 6] Oem ID : "ALASKA" [010h 0016 8] Oem Table ID : "A M I" [018h 0024 4] Oem Revision : 01072009 [01Ch 0028 4] Asl Compiler ID : "AMI " [020h 0032 4] Asl Compiler Revision : 00010013 [024h 0036 8] ACPI Table Address 0 : 00000000BA5F8180 [02Ch 0044 8] ACPI Table Address 1 : 00000000BA5F8290 [034h 0052 8] ACPI Table Address 2 : 00000000BA5F8308 [03Ch 0060 8] ACPI Table Address 3 : 00000000BA5F8848 [044h 0068 8] ACPI Table Address 4 : 00000000BA5F9320 [04Ch 0076 8] ACPI Table Address 5 : 00000000BA5F9360 [054h 0084 8] ACPI Table Address 6 : 00000000BA5F9398 [05Ch 0092 8] ACPI Table Address 7 : 00000000BA5F9708 [064h d100 8] ACPI Table Address 8 : 00000000BA5FC9A8 [06Ch 0108 8] ACPI Table Address 9 : 0000000000000000 But according to the bug report, the XSDT in fact is not broken. In the above XSDT, ACPI Table Address 1-8 contains the same value as RSDT. The differences can only be seen on the following 2 entries: 1. The first entry points to a FADT whose Revision is 5 while the first entry in RSDT points to a FADT whose Revision is 2. The FADT dumped from the address indicated by the first entry of XSDT: FACP @ 0x00000000BA5F8180 0000: 46 41 43 50 0C 01 00 00<05>4B 41 4C 41 53 4B 41 FACP.....KALASKA ... The FADT dumped from the address indicated by the first entry of RSDT: FACP @ 0x00000000BA5ED0F0 0000: 46 41 43 50 84 00 00 00<02>A7 41 4C 41 53 4B 41 FACP......ALASKA ... 2. The last entry is a NULL terminator. According to the test result, the Revision 5 FADT is accessible. Thus the original solution turns out to be a work around that is preventing the higher revision tables to be used for such platforms (they are all x86-64 platforms, and should use XSDT and higher revision FADT). This patch offers a new solution, where a sanity check is performed before installing a table address from XSDT. If the entry is NULL, it is simply discarded. Note that, this patch doesn't remove the original solution, so for Linux kernel, this commit is actually a no-op, but it allows acpidump to be working on such platforms. By doing so, we allow another easy revertable commit to enable this feature so that when that commit is reverted, the useful sanity check will not be affected. Lv Zheng. References: https://bugzilla.kernel.org/show_bug.cgi?id=73911 References: https://bugs.archlinux.org/task/39811Signed-off-by: NLv Zheng <lv.zheng@intel.com> Reported-and-tested-by: NBruce Chiarelli <mano155@gmail.com> Reported-and-tested-by: NSpyros Stathopoulos <spystath@gmail.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Lv Zheng 提交于
This patch extends ACPI_HW_DEPENDENT_x mechanism to all error message related functions so that the OSPMs can have full control to configure them into stub functions. This patch doesn't include code for Linux to use this new mechanism, thus no functional change. Lv Zheng. Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Lv Zheng 提交于
OSPMs like Linux trend to include all header files but leave empty stub macros for a feature that is not configured during build. This patch cleans up global variables that are defined in utglobal.c using ACPI_INIT_GLOBAL mechanism. In Linux, such global variables are used by the subsystems external to ACPICA. This patch also cleans up global variables that are defined in utglobal.c using ACPI_GLOBAL mechanism. In Linux, such global variables are not used or should not be used by the subsystems external to ACPICA. External global variables can be redefined by OSPMs using ACPI_INIT_GLOBAL/ACPI_GLOBAL macros. Thus the ACPI_GLOBAL/ACPI_INIT_GLOBAL mechanisms can be used by OSPM to implement stubs for such external globals. This patch doesn't include code for Linux to use this new mechanism, thus no functional changes. Lv Zheng. Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 David E. Box 提交于
More of a style cleanup. If hw_build_pci_list is to return a non-zero status, it now deletes any partial ID list that has been constructed. If it returns AE_OK, the caller is responsible for list deletion. David Box. Signed-off-by: NDavid E. Box <david.e.box@linux.intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Bob Moore 提交于
This patch currently only affects acpihelp and iASL which are not shipped in the Linux kernel. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Bob Moore 提交于
1) Add standard trace mechanism. 2) Add ACPI_EXPORT_SYMBOL macro. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Lv Zheng 提交于
Move all of the public globals to acpixf.h for the convenience of users. Also: Adds #ifndef/#endif conditions arround ACPI_GLOBAL and ACPI_INIT_GLOBAL definition so that OSPMs might be able to: 1. Redefine ACPI_GLOBAL/ACPI_INIT_GLOBAL into no-op, and 2. Redefine external global variables into immediates to implement stubs for them. Lv Zheng. Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Lv Zheng 提交于
This patch deploys ACPI_DEBUGGER_EXEC usage to utglobal.c to reduce "ifdef" of ACPI_DEBUGGER. No functional changes. Lv Zheng. Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Lv Zheng 提交于
This patch deletes global variable declarations that are no longer used by ACPICA. No functional changes. Lv Zheng. Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 06 5月, 2014 1 次提交
-
-
由 Lv Zheng 提交于
Linux XSDT validation mechanism backport has introduced a regreession: Commit: 671cc68d Subject: ACPICA: Back port and refine validation of the XSDT root table. There is a pointer still accessed after unmapping. This patch fixes this issue. Lv Zheng. Fixes: 671cc68d (ACPICA: Back port and refine validation of the XSDT root table.) References: https://bugzilla.kernel.org/show_bug.cgi?id=73911 References: https://bugs.archlinux.org/task/39811Signed-off-by: NLv Zheng <lv.zheng@intel.com> Reported-and-tested-by: NBruce Chiarelli <mano155@gmail.com> Reported-and-tested-by: NSpyros Stathopoulos <spystath@gmail.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Cc: 3.14+ <stable@vger.kernel.org> # 3.14+ Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 01 5月, 2014 1 次提交
-
-
由 Lan Tianyu 提交于
According commit d640113f (ACPI: processor: fix acpi_get_cpuid for UP processor), BIOS may not provide _MAT or MADT tables and acpi_get_apicid() always returns -1. For these cases, original code will pass apic_id with vaule of -1 to acpi_map_cpuid() and it will check the acpi_id. If acpi_id is equal to zero, ignores apic_id and return zero for CPU0. Commit b981513f (ACPI / scan: bail out early if failed to parse APIC ID for CPU) changed the behavior. Return ENODEV when find apic_id is less than zero after calling acpi_get_apicid(). This causes acpi-cpufreq driver fails to be loaded on some machines. This patch is to fix it. Fixes: b981513f (ACPI / scan: bail out early if failed to parse APIC ID for CPU) References: https://bugzilla.kernel.org/show_bug.cgi?id=73781 Cc: 3.14+ <stable@vger.kernel.org> # 3.14+ Reported-and-tested-by: NKATO Hiroshi <katoh@mikage.ne.jp> Reported-and-tested-by: NStuart Foster <smf.linux@ntlworld.com> Signed-off-by: NLan Tianyu <tianyu.lan@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 30 4月, 2014 1 次提交
-
-
由 Kieran Clancy 提交于
Address a regression caused by commit ad332c8a: (ACPI / EC: Clear stale EC events on Samsung systems) After the earlier patch, there was found to be a race condition on some earlier Samsung systems (N150/N210/N220). The function acpi_ec_clear was sometimes discarding a new EC event before its GPE was triggered by the system. In the case of these systems, this meant that the "lid open" event was not registered on resume if that was the cause of the wake, leading to problems when attempting to close the lid to suspend again. After testing on a number of Samsung systems, both those affected by the previous EC bug and those affected by the race condition, it seemed that the best course of action was to process rather than discard the events. On Samsung systems which accumulate stale EC events, there does not seem to be any adverse side-effects of running the associated _Q methods. This patch adds an argument to the static function acpi_ec_sync_query so that it may be used within the acpi_ec_clear loop in place of acpi_ec_query_unlocked which was used previously. With thanks to Stefan Biereigel for reporting the issue, and for all the people who helped test the new patch on affected systems. Fixes: ad332c8a (ACPI / EC: Clear stale EC events on Samsung systems) References: https://lkml.kernel.org/r/532FE3B2.9060808@biereigel-wb.de References: https://bugzilla.kernel.org/show_bug.cgi?id=44161#c173Reported-by: NStefan Biereigel <stefan@biereigel.de> Signed-off-by: NKieran Clancy <clancy.kieran@gmail.com> Tested-by: NStefan Biereigel <stefan@biereigel.de> Tested-by: NDennis Jansen <dennis.jansen@web.de> Tested-by: NNicolas Porcel <nicolasporcel06@gmail.com> Tested-by: NMaurizio D'Addona <mauritiusdadd@gmail.com> Tested-by: NJuan Manuel Cabo <juanmanuel.cabo@gmail.com> Tested-by: NGiannis Koutsou <giannis.koutsou@gmail.com> Tested-by: NKieran Clancy <clancy.kieran@gmail.com> Cc: 3.14+ <stable@vger.kernel.org> # 3.14+ Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 25 4月, 2014 1 次提交
-
-
由 Rafael J. Wysocki 提交于
Commit 1a699476 "ACPI / hotplug / PCI: Hotplug notifications from acpi_bus_notify()" changed the root notify handler, acpi_bus_notify(), to block unknown type norifications, but it overlooked the fact that they might be propagated to drivers via the ->notify() callback. Fix the problem by allowing drivers to receive unknown type notifications via ->notify() as before. Fixes: 1a699476 (ACPI / hotplug / PCI: Hotplug notifications from acpi_bus_notify()) Reported-and-tested-by: NMantas Mikulėnas <grawity@gmail.com> Reported-and-tested-by: NSitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 22 4月, 2014 1 次提交
-
-
由 Lv Zheng 提交于
The size of the buffer allocated for generic_serial_bus region access is not correct. This patch introduces acpi_ex_get_serial_access_length() to be invoked to obtain correct data buffer length. Signed-off-by: NLv Zheng <lv.zheng@intel.com> Reported by: Lan Tianyu <tianyu.lan@intel.com> Acked-by: NLan Tianyu <tianyu.lan@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 21 4月, 2014 21 次提交
-
-
由 Lv Zheng 提交于
This patch is the generation of a commit that updates release automation with newly added structures and files that are referenced by the acpidump. Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Lv Zheng 提交于
The acpidump is initiated by Bob Moore and Chao Guan, fixed and completed by Lv Zheng. This patch is a generation of the commit that adds acpidump release automation into ACPICA release process. Lv Zheng. Note that this patch doesn't replace the kernel shipped acpidump with the new acpidump. The replacement is done by further patches. Original-by: NChao Guan <guanchao@mail.ustc.edu.cn> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Bob Moore 提交于
New file is tbdata.c -- management functions for ACPICA table manager data structures. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Bob Moore 提交于
Some various cleanups and renames. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Lv Zheng 提交于
This patch adds a new API - acpi_install_table(). OSPMs can use this API to install tables during early boot stage. Lv Zheng. References: https://lkml.org/lkml/2014/2/28/372 Cc: Thomas Renninger <trenn@suse.de> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Lv Zheng 提交于
It is reported that when acpi_gbl_disable_ssdt_table_load is specified, user still can see it installed into /sys/firmware/acpi/tables on Linux boxes. This is because the option only stops table "loading", but doesn't stop table "installing", thus it is still in the acpi_gbl_root_table_list. With previous cleanups, it is possible to prevent SSDT installations to make it not such confusing. The global variable is also renamed. Lv Zheng. Signed-off-by: NLv Zheng <lv.zheng@intel.com> [rjw: Subject] Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Lv Zheng 提交于
This patch refines ACPI_TABLE_ORIGIN_xxx flags. No functional changes. The previous commits have introduced the following internal APIs: 1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 2. acpi_tb_release_table: Release struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to ACPI_TABLE_ORIGIN_xxx flags. 5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to ACPI_TABLE_ORIGIN_xxx flags. It thus detects that the ACPI_TABLE_ORIGIN_UNKNOWN is redundant to ACPI_TABLE_ORIGIN_OVERRIDE. The ACPI_TABLE_ORIGIN_xxTERN_VIRTUAL flags are named as VIRTUAL in order not to confuse with x86 logical address, this patch also renames all "logical override" into "virtual override". Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Lv Zheng 提交于
The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Lv Zheng 提交于
As acpi_tb_validate_table() returns failure on checksum verification without doing invalidatation, all its invocations that are not done to a descriptor stored in acpi_gbl_root_table_list are checked and balanced. But this is not a real issue as the descritors that have been passed to acpi_tb_add_table() are all virtual address tables and the validations are in fact no-op. The cleanup can ensure that any future extensions made on acpi_tb_add_table() to allow it to be invoked with physical address tables will not trigger memory leakage regressions. Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Lv Zheng 提交于
This patch is mainly a naming cleanup to clarify hidden logics, no functional changes. acpi_initialize_tables() is used by Linux to install table addresses for early boot steps. During this stage, table addresses are mapped by early_ioremap() mechanism which is different from the runtime IO mappings. Thus it is not safe for ACPICA to keep mapped pointers in struct acpi_table_desc structure during this stage. In order to support this in ACPICA, table states are divided into 1. "INSTALLED" (where struct acpi_table_desc.Pointer is always NULL) and 2. "VALIDATED" (where struct acpi_table_desc.Pointer is always not NULL). During acpi_initialize_tables(), table state are ensured to be "INSTALLED" but not "VALIDATED". This logic is ensured by the original code in very ambigious way. For example, currently acpi_tb_delete_table() is invoked in some place to perform an uninstallation while it is invoked in other place to perform an invalidation. They happen to work just because no one enters the penalty where the 2 behaviours are not equivalent. The naming cleanups are made in this patch: A. For installation and validation: There is code setting struct acpi_table_desc.Pointer first and delete it immediately to keep the descriptor's state as "INSTALLED" during the installation. This patch implements this in more direct way. After applying it, struct acpi_table_desc.Pointer will never be set in acpi_tb_install_table() and acpi_tb_override_table() as they are the only functions invoked during acpi_initialize_tables(). This is achieved by: 1. Rename acpi_tb_verify_table() to acpi_tb_validate_table() to clarify this change. 2. Rename acpi_tb_table_override() to acpi_tb_override_table() to keep nameing consistencies as other APIs (verb. Table). 3. Stops setting struct acpi_table_desc.Pointer in acpi_tb_install_table() and acpi_tb_table_override(). 4. Introduce acpi_tb_acquire_table() to acquire the table pointer that is not maintained in the struct acpi_table_desc of the global root table list and rewrite acpi_tb_validate_table() using this new function to reduce redundancies. 5. Replace the table pointer using the overridden table pointer in acpi_tb_add_table(). As acpi_tb_add_table() is not invoked during early boot stage, tables returned from this functions should be "VALIDATED". As acpi_tb_override_table() is modified by this patch to return a "INSTALLED" but not "VALIDATED" descriptor, to keep acpi_tb_add_table() unchanged, struct acpi_table_desc.Pointer is filled in acpi_tb_add_table(). B. For invalidation and uninstallation: The original code invalidate table by invoking acpi_tb_delete_table() here and there, but actually this function should only be used to uninstall tables. This can work just because its invocations are equivalent to invalidation in some cases. This patch splits acpi_tb_delete_table() into acpi_tb_invalidate_table() and acpi_tb_uninstall_table() and cleans up the hidden logic using the new APIs. This is achieved by: 1. Rename acpi_tb_delete_table() to acpi_tb_uninstall_table() as it is mainly called before resetting struct acpi_table_desc.Address. Thus the table descriptor is in "not INSTALLED" state. This patch enforces this by setting struct acpi_table_desc.Address to NULL in this function. 2. Introduce acpi_tb_invalidate_table() to be the reversal of acpi_tb_validate_table() and invoke it in acpi_tb_uninstall_table(). 3. Introduce acpi_tb_release_table() to release the table pointer that is not maintained in acpi_gbl_root_table_list and rewrite acpi_tb_invalidate_table() using this new function to reduce redundancies. After cleaning up, the maintainability of the internal APIs are also improved: 1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 2. acpi_tb_release_table: Release struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to ACPI_TABLE_ORIGIN_xxx flags. 5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to ACPI_TABLE_ORIGIN_xxx flags. 7. acpi_tb_override_table: Replace struct acpi_table_desc.Address and struct acpi_table_desc.Flags. It only happens in "INSTALLED" state. The patch has been unit tested in acpi_exec by: 1. Initializing; 2. Executing exc_tbl ASLTS tests; 3. Executing "Load" command. So that all original acpi_tb_install_table() and acpi_tb_override_table() invocations are covered. Known Issues: 1. Cleanup acpi_tb_add_table() to Kill Code Redundancies Current implementation in acpi_tb_add_table() is not very clean, further patch can rewrite acpi_tb_add_table() with ordered acpi_tb_install_table(), acpi_tb_override_table() and acpi_tb_validate_table(). It is not done in this patch so that it is easy for the reviewers to understand the changes in this patch. Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Lv Zheng 提交于
Currently there are following issues in acpi_tb_add_table(): Following logic is currently correct: 1. When a table is allocated in acpi_ex_load_op(), if a reloading happens, the allocated memory is freed by acpi_tb_add_table() and AE_OK is returned to the caller to avoid the caller to free it again. Following logic is currently incorrect: 1. When a table is allocated in acpi_ex_load_op() or by the acpi_load_table() caller, if the table is already loaded, there will be twice ACPI_FREE() called for the same pointer when acpi_tb_add_table() returns AE_ALREADY_EXISTS. This patch only fixes the above incorrect logic in acpi_tb_add_table(): 1. Only invoke acpi_tb_delete_table() if AE_OK is going to be returned. 2. After doing so, we do not invoke ACPI_FREE() when returning AE_OK; Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Lv Zheng 提交于
When table is overridden or reloaded, acpi_tb_delete_table() is called where struct acpi_table_desc.Pointer will be NULL. It thus is impossible for virtual addressed tables to obtain the .Pointer again in acpi_tb_verify_table(). This patch stores virtual table addresses (ACPI_TABLE_ORIGIN_ALLOCATED, ACPI_TABLE_ORIGIN_UNKNOWN, ACPI_TABLE_ORIGIN_OVERRIDE) in the struct acpi_table_desc.Address field and refills the struct acpi_table_desc.Pointer using these addresses in acpi_tb_verify_table(). Note that if a table with ACPI_TABLE_ORIGIN_ALLOCATED set is actually freed, the .Address field should be invalidated and thus must be replaced with NULL to avoid wrong future validations occuring in acpi_tb_verify_table(). Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Lv Zheng 提交于
The divergences in the ACPICA files makes it difficult to maintain linuxize ACPICA table commits. This patch reduces such divergences before applying table manager commits so that human interventions of patch rebasing can be reduced. Signed-off-by: NLv Zheng <lv.zheng@intel.com> [rjw: Subject] Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Bob Moore 提交于
Adds "OriginalSyncLevel" field to the output. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Lv Zheng 提交于
This patch cleans up all of the acpi_os_wait_events_complete() invocations to make it to be invoked inside of ACPICA in the way to accommodate Linux's work queue implementation. According to the report, current Linux kernel code is facing a boot time race issue in the acpi_remove_notify_handler(). This is because: Linux is using work queues to implement a deferred handler call environment while ACPICA expects OSPM to implement acpi_os_wait_events_complete() using wait queues. The position to invoke a "waiter" is not suitable for a "flusher" as new invocations can be scheduled after this position and before the deletion of the handler from its management container. Since the following commit has deleted acpi_os_wait_events_complete() parameters, it thus might not be possible for OSPM to achieve a safe removal using wait queues. This requires ACPICA to be changed accordingly to "flush" handlers rather than "wait" them to be drain up: Commit: 5ff986a2a9db11858247b71fe242fe17617229aa Date: Wed, 16 May 2012 13:36:07 -0700 Subject: Introduce acpi_os_wait_events_complete interface. This interface will block until asynchronous events like notifies and GPEs are complete. Within ACPICA, it is called before a notify or GPE handler is removed. ACPICA BZ 868. This patch fixes this issue by invoking acpi_os_wait_events_complete() in the way to "flush" things - it thus should be put to the position after handler is removed from its management container but before it is destructed. The technical concerns are: 1. MTX_NAMESPACE is used to protect things that acpi_os_wait_events_complete() might be waiting for, thus MTX_NAMESPACE must be unlocked before invoking acpi_os_wait_events_complete(). 2. MTX_NAMESPACE is also used to implement the serialization of acpi_install_notify_handler() and acpi_remove_notify_handler(). This patch changes this logic, thus if there are many acpi_install/remove_notify_handler() invoked in parallel, the acpi_os_wait_events_complete() might face the races which could cause it never running to an end. Normally this will require additional code to implement a separate locking facility which is not implemented due to 3. 3. Given ACPICA users will always invoke acpi_install_notify_handler() once during Linux module/device initialization and invoke acpi_remove_notify_handler() once during module/device finalization, problem stated in 2 will not happen in Linux environment due to the mutual exclusive module/device existence, this fix thus is sufficient. Same concerns can apply to acpi_install/remove_gpe_handler(). Reported and tested: Ronald Vink. Fixed: Lv Zheng. References: https://bugzilla.kernel.org/show_bug.cgi?id=60583Signed-off-by: NLv Zheng <lv.zheng@intel.com> Reported-and-Tested-by: NRonald Vink <ronald.vink@boskalis.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Bob Moore 提交于
For Notify operators, displays a comment that describe the meaning of the notify value. This patch updates the debugging information that is enabled for CONFIG_ACPI_DEBUG builds. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Bob Moore 提交于
For _HID and _CID, the disassembler will emit a string that describes the device if the _HID/_CID value is recognized. acpihelp updated also. acpihelp will now search for a specific ID as well as displaying the list of "known" (to ACPICA) IDs. This patch does not affect Linux kernel behavior as the disassembler and the acpihelp are not shipped with it. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Bob Moore 提交于
We would like to see the ASL for any machine that uses this operator, so emit at least a warning to hopefully draw some attention. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Bob Moore 提交于
Change all comments that contain the string "ACPI CA" to "ACPICA" so that the name is standard across the entire source base. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 David Binderman 提交于
ACPICA BZ 1077. David Binderman. References: https://bugs.acpica.org/show_bug.cgi?id=1077Signed-off-by: NDavid Binderman <dcb314@hotmail.com> Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Cc: 3.9+ <stable@vger.kernel.org> # 3.9.x: 42f8fb75: ACPICA: Source restructuring Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Bob Moore 提交于
These recently added interfaces did not have these macros, used by some hosts. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 09 4月, 2014 1 次提交
-
-
由 Hanjun Guo 提交于
The UEFI Forum included the ACPI spec in its portfolio in October 2013 and will host future spec iterations, following the ACPI v5.0a release. A UEFI Forum working group named ACPI Specification Working Group (ASWG) has been established to handle future ACPI developments, any UEFI member can join the group and contribute to ACPI specification. So update the ownership and developers for ACPI in Kconfig accordingly, and add another website link to ACPI specification too. Signed-off-by: NHanjun Guo <hanjun.guo@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 07 4月, 2014 3 次提交
-
-
由 Rafael J. Wysocki 提交于
There are no references to the dock_device_ids[] table anywhere in the code and it is not even useful for module autoloading, because the dock driver can only be built in, so drop it. Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Stephen Chandler Paul 提交于
Like many other Windows 8 laptops the ThinkPad Helix's backlight has a broken ACPI interface and can only be properly adjusted by using the video card's native backlight control. This adds the ThinkPad Helix to the list of laptops affected with this issue so that video.use_native_backlight is enabled by default. Signed-off-by: NStephen Chandler Paul <thatslyude@gmail.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Zhihui Zhang 提交于
A debug statement in acpi_thermal_trips_update() uses a wrong trip point (tz->trips.critical instead of tz->trips.hot) to get the temperature value from. Fix that. Signed-off-by: NZhihui Zhang <zzhsuny@gmail.com> [rjw: Subject and changelog] Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-