Use the appropriate SPDX license identifiers and drop the license text.
This patch is only cosmetic.
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch main goal is to improve driver performance by moving the
crypto request from a list to a RDR ring shadow.

This is possible since there is one producer and one consume for this
RDR request shadow and one ring descriptor is left unused.
Doing this change eliminates the use of spinlock when accessing the
descriptor ring and the need to dynamicaly allocate memory per crypto
request.

The crypto request is placed in the first RDR shadow descriptor only
if there are enough descriptors, when the result handler is invoked,
it fetches the first result descriptor from RDR shadow.
Signed-off-by: NOfer Heifetz <oferh@marvell.com>
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds support for two new algorithms in the Inside Secure
SafeXcel cryptographic engine driver: ecb(des3_ede) and cbc(des3_ede).
Signed-off-by: NOfer Heifetz <oferh@marvell.com>
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds support for two algorithms in the Inside Secure SafeXcel
cryptographic engine driver: ecb(des) and cbc(des).
Signed-off-by: NOfer Heifetz <oferh@marvell.com>
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds support for the hmac(md5) algorithm in the Inside Secure
SafeXcel cryptographic engine driver.
Signed-off-by: NOfer Heifetz <oferh@marvell.com>
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds the MD5 algorithm support to the Inside Secure SafeXcel
cryptographic engine driver.
Signed-off-by: NOfer Heifetz <oferh@marvell.com>
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The ORO bridge (connected to the EIP197 write channel) does not
generate back pressure towards the EIP197 when its internal FIFO is
full. It assumes that the EIP will not drive more write transactions
than the maximal supported outstanding (32).

Hence tx_max_cmd_queue must be configured to 5 (or less).
Signed-off-by: NOfer Heifetz <oferh@marvell.com>
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds extra steps in the module removal path, to reset the
command and result rings. The corresponding interrupts are cleared, and
the ring address configuration is reset.
Signed-off-by: NOfer Heifetz <oferh@marvell.com>
[Antoine: small reworks, commit message]
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch updates the TRC configuration so that the version of the
EIP197 engine being used is taken into account, as the configuration
differs between the EIP197B and the EIP197D.
Signed-off-by: NOfer Heifetz <oferh@marvell.com>
[Antoine: commit message]
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds support for the eip197d engine to the Inside Secure
SafeXcel cryptographic driver. This new engine is similar to the eip197b
and reuse most of its code.
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

So far a single processing engine (PE) was configured and used in the
Inside Secure SafeXcel cryptographic engine driver. Some versions have
more than a single PE. This patch rework the driver's initialization to
take this into account and to allow configuring more than one PE.
Signed-off-by: NOfer Heifetz <oferh@marvell.com>
[Antoine: some reworks and commit message.]
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The Inside Secure SafeXcel driver currently uses 4 rings, but the
eip197d engines has 8 of them. This patch updates the driver so that
rings are allocated dynamically based on the number of available rings
supported by a given engine.
Signed-off-by: NOfer Heifetz <oferh@marvell.com>
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add a flags field in the private structure, and a first flag for engines
needing context invalidation (currently only the eip197b). The
invalidation is needed when the engine includes a TRC cache, which will
also be true for the upcoming addition of the eip197d engine.
Suggested-by: NOfer Heifetz <oferh@marvell.com>
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

EIP engines do not support the same set of algorithms. So far the
supported engines in the Inside Secure SafeXcel driver support the same
set of algorithms, but that won't be true for all engines. This patch
adds an 'engines' field in the algorithm definitions so that they only
are registered when using a compatible cryptographic engine.
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

At first we used two compatibles in the SafeXcel driver, named after the
engine revision: eip97 and eip197. However this family of engines has
more precise versions and in fact we're supporting the eip97ies and
eip197b. More versions will be supported in the future, such as the
eip197d, and we'll need to differentiate them.

This patch fixes the compatibles used in the driver, to now use precise
ones. The two historical compatibles are kept for backward
compatibility.
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch moves the firmware loaded by the Inside Secure SafeXcel
driver from /lib/firmware/ to /lib/firmware/inside-secure/eip197b/. This
prepares the driver for future patches which will support other
revisions of the EIP197 crypto engine as they'll have their own
firmwares.

To keep the compatibility of what was done, the old path is still
supported as a fallback for the EIP197b (currently the only one
supported by the driver that loads a firmware).
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds the authenc(hmac(sha384),cbc(aes)) algorithm support to
the Inside Secure SafeXcel driver.
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds the hmac(sha384) algorithm support to the Inside Secure
SafeXcel driver.
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds the sha384 algorithm support to the Inside Secure
SafeXcel driver.
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds the authenc(hmac(sha512),cbc(aes)) algorithm support to
the Inside Secure SafeXcel driver.
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds the hmac(sha512) algorithm support to the Inside Secure
SafeXcel driver.
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds the sha512 algorithm support to the Inside Secure
SafeXcel driver.
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The token size was increased for AEAD support. Occasional authentication
fails arise since the result descriptor overflows. This is because the
token size and the engine minimal thresholds must be in sync.
Signed-off-by: NOfer Heifetz <oferh@marvell.com>
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds the authenc(hmac(sha1),cbc(aes)) AEAD algorithm
support to the Inside Secure SafeXcel driver.
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds the authenc(hmac(sha224),cbc(aes)) AEAD algorithm
support to the Inside Secure SafeXcel driver.
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds support for the first AEAD algorithm in the Inside
Secure SafeXcel driver, authenc(hmac(sha256),cbc(aes)). As this is the
first AEAD algorithm added to this driver, common AEAD functions are
added as well.
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch improves the error reporting from the Inside Secure driver to
the upper layers and crypto consumers. All errors reported by the engine
aren't fatal, and some may be genuine.
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch fixes the Inside Secure driver which uses a memtset() call to
set an MMIO area from the cryptographic engine to 0. This is wrong as
memset() isn't guaranteed to work on MMIO for many reasons. This led to
kernel paging request panics in certain cases. Use memset_io() instead.

Fixes: 1b44c5a6 ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver")
Reported-by: NOfer Heifetz <oferh@marvell.com>
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds the hmac(sha224) support to the Inside Secure
cryptographic engine driver.
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds the hmac(sha256) support to the Inside Secure
cryptographic engine driver.
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch fixes a typo in the EIP197_HIA_xDR_WR_CTRL_BUG register name,
as it should be EIP197_HIA_xDR_WR_CTRL_BUF. This is a cosmetic only
change.
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Small cosmetic patch fixing one typo in the
EIP197_HIA_DSE_CFG_ALLWAYS_BUFFERABLE macro, it should be _ALWAYS_.
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

On Armada 7K/8K we need to explicitly enable the register clock. This
clock is optional because not all the SoCs using this IP need it but at
least for Armada 7K/8K it is actually mandatory.

The binding documentation is updated accordingly.
Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The clock is optional, but if it is present we should managed it. If
there is an error while trying getting it, we should exit and report this
error.

So instead of returning an error only in the -EPROBE case, turn it in an
other way and ignore the clock only if it is not present (-ENOENT case).
Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In this driver the clock is got but never put when the driver is removed
or if there is an error in the probe.

Using the managed version of clk_get() allows to let the kernel take care
of it.

Fixes: 1b44c5a6 ("crypto: inside-secure - add SafeXcel EIP197 crypto
engine driver")
cc: stable@vger.kernel.org
Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In heavy traffic the DMA mapping is overwritten by multiple requests as
the DMA address is stored in a global context. This patch moves this
information to the per-hash request context so that it can't be
overwritten.

Fixes: 1b44c5a6 ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver")
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In heavy traffic the DMA mapping is overwritten by multiple requests as
the DMA address is stored in a global context. This patch moves this
information to the per-hash request context so that it can't be
overwritten.

Fixes: 1b44c5a6 ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver")
Signed-off-by: NOfer Heifetz <oferh@marvell.com>
[Antoine: rebased the patch, small fixes, commit message.]
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch updates the Inside Secure SafeXcel driver to avoid being
out-of-sync between the number of requests sent and the one being
completed.

The number of requests acknowledged by the driver can be different than
the threshold that was configured if new requests were being pushed to
the h/w in the meantime. The driver wasn't taking those into account,
and the number of remaining requests to handled (to reconfigure the
interrupt threshold) could be out-of sync.

This patch fixes it by not taking in account the number of requests
left, but by taking in account the total number of requests being sent
to the hardware, so that new requests are being taken into account.

Fixes: dc7e28a3 ("crypto: inside-secure - dequeue all requests at once")
Suggested-by: NOfer Heifetz <oferh@marvell.com>
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds a check in the SafeXcel dequeue function, to avoid
processing request further if no hardware command was issued. This can
happen in certain cases where the ->send() function caches all the data
that would have been send.

Fixes: 809778e0 ("crypto: inside-secure - fix hash when length is a multiple of a block")
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch fixes the Inside Secure SafeXcel driver not to overwrite the
interrupt threshold value. In certain cases the value of this register,
which controls when to fire an interrupt, was overwritten. This lead to
packet not being processed or acked as the driver never was aware of
their completion.

This patch fixes this behaviour by not setting the threshold when
requests are being processed by the engine.

Fixes: dc7e28a3 ("crypto: inside-secure - dequeue all requests at once")
Suggested-by: NOfer Heifetz <oferh@marvell.com>
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>