This change slightly reduces the time needed to log in.
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: NDavid Dillow <dave@thedillows.org>
Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Preparation for ethernet driver.
Signed-off-by: NAchiad Shochat <achiad@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pass consumer index as a parameter to arm CQ
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Preparation for ethernet driver.
These functions will be used in drivers other than mlx5_ib.
Signed-off-by: NAchiad Shochat <achiad@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAchiad Shochat <achiad@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Do it in one place instead of every where the function is invoked
Signed-off-by: NAchiad Shochat <achiad@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Put a line of space before return and next statement.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pass 0 in the sqd_event parameter.
Signed-off-by: NHaggai Abramovsky <hagaya@mellanox.com>
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The calls to SET_PORT used hard-code numbers, when supplying command's
opcode modifiers, fix that to use well defined constants.
Signed-off-by: NIdo Shamay <idos@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Don't use dev->iflink anymore.

CC: Roland Dreier <roland@kernel.org>
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Properly verify that the resulting page aligned end address is larger
than both the start address and the length of the memory area requested.

Both the start and length arguments for ib_umem_get are controlled by
the user. A misbehaving user can provide values which will cause an
integer overflow when calculating the page aligned end address.

This overflow can cause also miscalculation of the number of pages
mapped, and additional logic issues.

Addresses: CVE-2014-8159
Cc: <stable@vger.kernel.org>
Signed-off-by: NShachar Raindel <raindel@mellanox.com>
Signed-off-by: NJack Morgenstein <jackm@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

struct kiocb now is a generic I/O container, so move it to fs.h.
Also do a #include diet for aio.h while we're at it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

For RoCE ports, we set the u32 PMA values based on u64 HCA counters. In case of
overflow, according to the IB spec, we have to saturate a counter to its
max value, do that.

Fixes: c3779134 ('IB/mlx4: Support PMA counters for IBoE')
Signed-off-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Processing an event is done in a different context from the one when
the event was dispatched. This requires a check that the slave
net device is still valid when the event is being processed. The check is done
under the iboe lock which ensure correctness.

Fixes: a5750090 ('IB/mlx4: Add port aggregation support')
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Upstream checkpatch now requires this.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Code that does this:

	if (!(d_unhashed(tmp) && tmp->d_inode)) {
		...
		simple_unlink(parent->d_inode, tmp);
	}

is broken because:

	!(d_unhashed(tmp) && tmp->d_inode)

is equivalent to:

	!d_unhashed(tmp) || !tmp->d_inode

so it is possible to get into simple_unlink() with tmp->d_inode == NULL.

simple_unlink(), however, assumes tmp->d_inode cannot be NULL.

I think that what was meant is this:

	!d_unhashed(tmp) && tmp->d_inode

and that the logical-not operator or the final close-bracket was misplaced.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
cc: Bryan O'Sullivan <bos@pathscale.com>
cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Re-enable the on-demand paging capability query through the
extended query device verb.
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Reviewed-by: NYann Droneaud <ydroneaud@opteya.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Add on-demand paging capabilities reporting to the extended query device verb.

Yann Droneaud writes:

    Note: as offsetof() is used to retrieve the size of the lower chunk
    of the response, beware that it only works if the upper chunk
    is right after, without any implicit padding. And, as the size of
    the latter chunk is added to the base size, implicit padding at the
    end of the structure is not taken in account. Both point must be
    taken in account when extending the uverbs functionalities.
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Reviewed-by: NYann Droneaud <ydroneaud@opteya.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Add extensible query device capabilities verb to allow adding new features.
ib_uverbs_ex_query_device is added and copy_query_dev_fields is used to copy
capability fields to be used by both ib_uverbs_query_device and
ib_uverbs_ex_query_device.

Following the discussion about this patch [1], the code now validates
the command's comp_mask is zero, returning -EINVAL for unknown values,
in order to allow extending the verb in the future.

The verb also checks the user-space provided response buffer size and
only fills in capabilities that will fit in the buffer. In attempt to
follow the spirit of presentation [2] by Tzahi Oved that was presented
during OpenFabrics Alliance International Developer Workshop 2013, the
comp_mask bits will only describe which fields are valid.  Furthermore,
fields that can simply be cleared when they are not supported, do not
require a comp_mask bit at all.  The verb returns a response_length
field containing the actual number of bytes written by the kernel, so
that a newer version running on an older kernel can tell which fields
were actually returned.

[1] [PATCH v1 0/5] IB/core: extended query device caps cleanup for v3.19
    http://thread.gmane.org/gmane.linux.kernel.api/7889/

[2] https://www.openfabrics.org/images/docs/2013_Dev_Workshop/Tues_0423/2013_Workshop_Tues_0830_Tzahi_Oved-verbs_extensions_ofa_2013-tzahio.pdfSigned-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Reviewed-by: NYann Droneaud <ydroneaud@opteya.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

In c4iw_wait_for_reply(), if a FW6_MSG WR reply is not received after
C4IW_WR_TO seconds, fail the WR operation and mark the device as fatally
dead.  Further, if the device is marked fatally dead, then fail the WR
wait immediately.

Also change the timeout to 60 seconds.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The ->sgid_tbl[] array has OCRDMA_MAX_SGID number of elements so this
test is off by one.  ->sgid_tbl is allocated in ocrdma_alloc_resources().
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

In the expressions idx/32 and idx%32, both idx and 32 have signed
type, and unfortunately the C standard prescribes rounding to 0, so
unless gcc can prove that idx is non-negative, these cannot be
implemented as simple shift respectively mask operations. Help gcc by
changing the type of idx to unsigned - this cuts another few
instructions from the generated code.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

gcc emits a surprising amount of code in order to flip a bit. One
would think that a single instruction is enough.

$ scripts/bloat-o-meter /tmp/ocrdma_verbs.o drivers/infiniband/hw/ocrdma/ocrdma_verbs.o
add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-142 (-142)
function                                     old     new   delta
ocrdma_post_srq_recv                         498     460     -38
ocrdma_poll_cq                              2010    1962     -48
ocrdma_discard_cqes                          495     439     -56

All three calls of ocrdma_srq_toggle_bit happen within spinlocks, so
saving a few useless instructions might be worthwhile.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Signed-off-by: NMitesh Ahuja <mitesh.ahuja@emulex.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

For the AH that describs a VLAN interface details, vlan present bit
needs to be set during posting a WQE. This patch adds the code to
allow it happening.
Signed-off-by: NMitesh Ahuja <mitesh.ahuja@emulex.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Use get_ocrdma_dev(ocrdma_qp->ibqp.device) function to access ocrdma
device pointer.
Signed-off-by: NMitesh Ahuja <mitesh.ahuja@emulex.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Add support for interrupt moderation for ocrdma device.  Thresholds
for high interrupt rates are static values derived based on experimental
results.
Signed-off-by: NMitesh Ahuja <mitesh.ahuja@emulex.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Check for return value for ocrdma_resolve_dmac while setting AV params.
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NMitesh Ahuja <mitesh.ahuja@emulex.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

If the SQ and RQ of the QP in error state uses separate CQs, traverse
the list of QPs using each CQs and invoke the buddy CQ handler for
both SQ and RQ.
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NMitesh Ahuja <mitesh.ahuja@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Remove support for RDMA-READ-WITH-INVALIDATE from ocrdma driver.
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NMitesh Ahuja <mitesh.ahuja@emulex.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

1. Cleanup sequence in ocrdma_remove(). The device should be
   unregistered from IB stack before any device specific cleanup.
2. Always return success in the resource destroy path. In case destroy
   command returns error, IB stack will trigger cleanup again while
   closing the uverbs device causing kernel panic BUG_ON().
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NMitesh Ahuja <mitesh.ahuja@emulex.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Fix ocrdma_query_qp to refelect correct qp state based on FW.
Signed-off-by: NMitesh Ahuja <mitesh.ahuja@emulex.com>
Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

1. Add statistics counters for error cqes.
2. Add file ("reset_stats") to reset rdma stats in Debugfs.
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NMitesh Ahuja <mitesh.ahuja@emulex.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Fix ocrdma_register_device to initialize correct number of interrupt
vectors in device pointer.
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NMitesh Ahuja <mitesh.ahuja@emulex.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Move PD allocation and deallocation from firmware to driver.  At
driver load time all the PDs will be requested from firmware and their
management will be handled by driver to reduce mailbox commands
overhead at runtime.
Signed-off-by: NMitesh Ahuja <mitesh.ahuja@emulex.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Increase the GID table size from 8 to 16 enteries.
Signed-off-by: NMitesh Ahuja <mitesh.ahuja@emulex.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Add the following per-port sysfs traffic counters for RoCE:

        port_xmit_packets
        port_rcv_packets
        port_rcv_data
        port_xmit_data
Signed-off-by: NMitesh Ahuja <mitesh.ahuja@emulex.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

When the last on-demand paging MR is released the notifier count is
left non-zero so that concurrent page faults will have to abort. If a
new MR is then registered, the counter is reset. However, the decision
is made to put the new MR in the list waiting for the notifier count
to reach zero, before the counter is reset. An invalidation or another
MR registration can release the MR to handle page faults, but without
such an event the MR can wait forever.

The patch fixes this issue by adding a check whether the MR is the
first on-demand paging MR when deciding whether it is ready to handle
page faults. If it is the first MR, we know that there are no mmu
notifiers running in parallel to the registration.

Fixes: 882214e2 ("IB/core: Implement support for MMU notifiers regarding on demand paging regions")
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NShachar Raindel <raindel@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

When we create an MR using reg_create, the mlx5_ib_dev pointer is not
updated on the new MR. This results in a kernel panics for ODP MRs
while handling page faults, when the mlx5_ib_update_mtt function uses
the invalid device pointer.
Signed-off-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>