- 21 12月, 2013 1 次提交
-
-
由 WANG Cong 提交于
This patch fixes: 1) pass mask rather than size to tcf_hashinfo_init() 2) the cleanup should be in reversed order in mirred_cleanup_module() Reported-by: NEric Dumazet <eric.dumazet@gmail.com> Fixes: 369ba567 ("net_sched: init struct tcf_hashinfo at register time") Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 12月, 2013 39 次提交
-
-
由 David S. Miller 提交于
Tan Xiaojun says: ==================== bridge: cleanup and fix checkpatch errors Clean up and fix some checkpatch errors in bridge driver. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NStephen Hemminger <stephen@networkplumber.org>
-
由 tanxiaojun 提交于
That open brace { should be on the previous line. Signed-off-by: NTan Xiaojun <tanxiaojun@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 tanxiaojun 提交于
"foo * bar" should be "foo *bar". Signed-off-by: NTan Xiaojun <tanxiaojun@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 tanxiaojun 提交于
Spaces required before the open parenthesis '(', before the open brace '{', after that ',' and around that '?/:'. Signed-off-by: NTan Xiaojun <tanxiaojun@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 tanxiaojun 提交于
Return is not a function, parentheses are not required. Signed-off-by: NTan Xiaojun <tanxiaojun@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 tanxiaojun 提交于
Because err is always negative, remove unnecessary condition judgment. Signed-off-by: NTan Xiaojun <tanxiaojun@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Save pkt_hash_types in tpa structure. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Sergei Shtylyov says: ==================== Add PHY IRQ support to the 'sh_eth' driver This patchset adds support for passing PHY's IRQ to the 'sh_eth' driver from the platform code and removes now useless code that hinders the PHY IRQ handing by philib. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sergei Shtylyov 提交于
There's no need anymore to call phy_init_hw() to reset/resume the PHY from the driver, as the call chain in phylib already has reached it, and so reset/resumed the PHY (even resuming it twice). This duplicate reset is not only needless, it e.g. clears the PHY's interrupt enables just setup by phylib and so prevents the expected IRQs from the PHY. Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sergei Shtylyov 提交于
Allow the platform code to pass PHY's IRQ to the driver. Print this IRQ along with the other PHY datails in sh_eth_phy_init(). Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Amir Vadai says: ==================== net/mlx4: Mellanox driver update 08-12-2013 This patchset contains: 1. Support in ndo_get_phys_port_id added by Hadar. 2. Change the driver to use by default CQE/EQE size of 64 bytes done by Eyal. This doubles the packet-rate of the NIC. 3. Configure the XPS queue mapping on driver load - added by Ido. 4. Fixes for some small bugs done by Jenny and Matan Patchset was applied and tested against commit: "23721754 lib: hash: follow-up fixups for arch hash" Changes from V1: - Removed Patch 10 "net/mlx4_en: Fix Supported/Advertised link mode reported by ethtool". This patch is needed to be rewritten from scratch and I wouldn't like it to block the rest of the patches in this set. Also, fix to Kconfig suggested by Ben will be sent in next patchset. Changes from V0: - Found some issues in "Reuse memory in RX flow" patch from V0. Removing this patch from the patchset till analyzed and fixed. - Fix some coding style issues in patch 6 "Configure the XPS queue mapping on driver load" - Changed patch 9 "Add NAPI support for transmit side" to use NAPI_POLL_WEIGHT instead of MLX4_EN_TX_BUDGET ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matan Barak 提交于
Need to validate port number at mlx4_promisc_qp() before use. Since port number is extracted from gid, as a cooked or corrupted gid could lead to a crash. Signed-off-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eugenia Emantayev 提交于
Add NAPI for TX side, implement its support and provide NAPI callback. Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.com> Signed-off-by: NEugenia Emantayev <eugenia@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eugenia Emantayev 提交于
MLX4_DEV_EVENT_SLAVE_INIT and MLX4_DEV_EVENT_SLAVE_SHUTDOWN events used by Hypervisor to inform the PPF IB driver that IB para-virtualization must be initialized/destroyed for a slave. If this event is catched by ETH VF annoying but harmless error message is printed into dmesg. Remove dmesg prints for these events. Signed-off-by: NEugenia Emantayev <eugenia@mellanox.co.il> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eyal Perry 提交于
To achieve out of the box performance default is to use 64 byte CQE/EQE. In tests that we conduct in our labs, we achieved a performance improvement of twice the message rate. For older VF/libmlx4 support, enable_64b_cqe_eqe must be set to 0 (disabled). Signed-off-by: NEyal Perry <eyalpe@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Shamay 提交于
Only TX rings of User Piority 0 are mapped. TX rings of other UP's are using UP 0 mapping. XPS is not in use when num_tc is set. Signed-off-by: NIdo Shamay <idos@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hadar Hen Zion 提交于
Use the port GUID read from the firmware to identify the physical port. This port identifier is available via ndo_get_phys_port_id for both PF and VF net-devices. Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hadar Hen Zion 提交于
Add the infrastructure needed to support ndo_get_phys_port_id which allows users to identify to which physical port a net-device is connected to by reading a unique port id. This will work for VFs and PFs. The driver uses a new device capability - phys_port_id, The PF driver reads the port phys_port_id from Firmware and stores it. The VF driver reads the port phys_port_id from the PF using QUERY_FUNC_CAP command. Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hadar Hen Zion 提交于
Set nic_info field in QUERY_FUNC_CAP, which designates supplementary NIC information is provided by the hypervisor. When set, the following fields are valid: nic_num_rings, nic_indirection_tbl_sz, cur_mac and phys_port_id. Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hadar Hen Zion 提交于
Use correct names for QUERY_FUNC_CAP fields: flags0 and flags1. Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hadar Hen Zion 提交于
All mailboxes are already zeroed by commit: 571b8b92 net/mlx4_core: Initialize all mailbox buffers to zero before use Remove explicit zero set for force mac and force vlan fields in mlx4_QUERY_FUNC_CAP_wrapper Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Given we allocate memory for each cpu, we can do this using NUMA affinities, instead of using NUMA policies of the process changing flow_limit_cpu_bitmap value. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rashika Kheria 提交于
This patch marks the function il_clear_traffic_stats() in debug.c as static because they are not used outside this file. Thus, it also removes the following warnings in wireless/iwlegacy/debug.c: drivers/net/wireless/iwlegacy/debug.c:35:1: warning: no previous prototype for ‘il_clear_traffic_stats’ [-Wmissing-prototypes] Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rashika Kheria 提交于
This patch marks the function il4965_ucode_rx_stats_read(), il4965_ucode_tx_stats_read() and il4965_ucode_general_stats_read() in 4965-debug.c as static because they are not used outside this file. Thus, it also removes the following warnings in wireless/iwlegacy/4965-debug.c: drivers/net/wireless/iwlegacy/4965-debug.c:59:1: warning: no previous prototype for ‘il4965_ucode_rx_stats_read’ [-Wmissing-prototypes] drivers/net/wireless/iwlegacy/4965-debug.c:471:1: warning: no previous prototype for ‘il4965_ucode_tx_stats_read’ [-Wmissing-prototypes] drivers/net/wireless/iwlegacy/4965-debug.c:637:1: warning: no previous prototype for ‘il4965_ucode_general_stats_read’ [-Wmissing-prototypes] Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rashika Kheria 提交于
This patch marks the function il3945_ucode_rx_stats_read(), il3945_ucode_tx_stats_read() and il3945_ucode_general_stats_read() in 3945-debug.c as static because they are not used outside this file. Thus, it also removes the following warnings in wireless/iwlegacy/3945-debug.c: drivers/net/wireless/iwlegacy/3945-debug.c:52:1: warning: no previous prototype for ‘il3945_ucode_rx_stats_read’ [-Wmissing-prototypes] drivers/net/wireless/iwlegacy/3945-debug.c:317:1: warning: no previous prototype for ‘il3945_ucode_tx_stats_read’ [-Wmissing-prototypes] drivers/net/wireless/iwlegacy/3945-debug.c:407:1: warning: no previous prototype for ‘il3945_ucode_general_stats_read’ [-Wmissing-prototypes] Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rashika Kheria 提交于
Create a new header file include/net/Space.h which contains prototype declaration of sbni_probe(). Include the new header file in drivers/net/Space.c and drivers/net/wan/sbni.c because they use this function. This eliminates the following warning in wan/sbni.c: drivers/net/wan/sbni.c:224:12: warning: no previous prototype for ‘sbni_probe’ [-Wmissing-prototypes] Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rashika Kheria 提交于
This patch marks the function stmmac_pltfr_freeze() and stmmac_pltfr_restore() in stmmac_platform.c as static because they are not used outside this file. Thus, it also removes the following warnings in ethernet/stmicro/stmmac/stmmac_platform.c: drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c:222:5: warning: no previous prototype for ‘stmmac_pltfr_freeze’ [-Wmissing-prototypes] drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c:236:5: warning: no previous prototype for ‘stmmac_pltfr_restore’ [-Wmissing-prototypes] Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rashika Kheria 提交于
This patch marks the function qlcnic_83xx_clear_legacy_intr_mask(), qlcnic_83xx_set_legacy_intr_mask() and qlcnic_83xx_enable_legacy_msix_mbx_intr() in qlcnic_83xx_hw.c as static because they are not used outside this file. Thus, it also removes the following warnings in ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c: drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c:318:13: warning: no previous prototype for ‘qlcnic_83xx_clear_legacy_intr_mask’ [-Wmissing-prototypes] drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c:323:13: warning: no previous prototype for ‘qlcnic_83xx_set_legacy_intr_mask’ [-Wmissing-prototypes] drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c:343:13: warning: no previous prototype for ‘qlcnic_83xx_enable_legacy_msix_mbx_intr’ [-Wmissing-prototypes] Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rashika Kheria 提交于
This patch marks the function qlcnic_enable_tx_intr(), qlcnic_83xx_enable_tx_intr() and qlcnic_83xx_disable_tx_intr() in qlcnic_io.c as static because they are not used outside this file. Thus, it also removes the following warnings in ethernet/qlogic/qlcnic/qlcnic_io.c: drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c:130:13: warning: no previous prototype for ‘qlcnic_enable_tx_intr’ [-Wmissing-prototypes] drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c:147:13: warning: no previous prototype for ‘qlcnic_83xx_enable_tx_intr’ [-Wmissing-prototypes] drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c:153:13: warning: no previous prototype for ‘qlcnic_83xx_disable_tx_intr’ [-Wmissing-prototypes] Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next由 David S. Miller 提交于
Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2013-12-19 1) Use the user supplied policy index instead of a generated one if present. From Fan Du. 2) Make xfrm migration namespace aware. From Fan Du. 3) Make the xfrm state and policy locks namespace aware. From Fan Du. 4) Remove ancient sleeping when the SA is in acquire state, we now queue packets to the policy instead. This replaces the sleeping code. 5) Remove FLOWI_FLAG_CAN_SLEEP. This was used to notify xfrm about the posibility to sleep. The sleeping code is gone, so remove it. 6) Check user specified spi for IPComp. Thr spi for IPcomp is only 16 bit wide, so check for a valid value. From Fan Du. 7) Export verify_userspi_info to check for valid user supplied spi ranges with pfkey and netlink. From Fan Du. 8) RFC3173 states that if the total size of a compressed payload and the IPComp header is not smaller than the size of the original payload, the IP datagram must be sent in the original non-compressed form. These packets are dropped by the inbound policy check because they are not transformed. Document the need to set 'level use' for IPcomp to receive such packets anyway. From Fan Du. Please pull or let me know if there are problems. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Scott Feldman says: ==================== bonding: add even more netlink attributes The following series implements five more bonding netlink attributes: num_grat_arp|num_unsol_na all_slaves_active min_links lp_interval packets_per_slave Tested with modified iproute2 to verify attributes can be set at bond creation time or set later. Verified sysfs interface to attributes continues to work. I have one more set after this one for all of the 802.3ad attributes. Whew. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Add IFLA_BOND_PACKETS_PER_SLAVE to allow get/set of bonding parameter packets_per_slave via netlink. Signed-off-by: NScott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Add IFLA_BOND_LP_INTERVAL to allow get/set of bonding parameter lp_interval via netlink. Signed-off-by: NScott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Add IFLA_BOND_MIN_LINKS to allow get/set of bonding parameter min_links via netlink. Signed-off-by: NScott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Add IFLA_BOND_ALL_SLAVES_ACTIVE to allow get/set of bonding parameter all_slaves_active via netlink. Signed-off-by: NScott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Add IFLA_BOND_NUM_PEER_NOTIF to allow get/set of bonding parameter num_grat_arp via netlink. Bonding parameter num_unsol_na is synonymous with num_grat_arp, so add only one netlink attribute to represent both bonding parameters. Signed-off-by: NScott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://gitorious.org/linux-can/linux-can-next由 David S. Miller 提交于
Marc Kleine-Budde says: ==================== this is a pull request of four patches for net-next/master. There is one patch by Markus Pargmann, which speeds up the c_can driver, a patch by John Whitmore which updates the in tree documentation. A patch by Jeff Kirsher which replaces the FSF's address by a link and a patch by Alexander Shiyan which converts the mcp251x driver to make use of managed resources. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Durrant 提交于
netback already has code which parses IPv4 and v6 headers to set up checksum offsets and these are always applied to GSO packets being sent from frontends. It's therefore suboptimal that GSOs are being marked SKB_GSO_DODGY to defer the gso_segs calculation when netback already has all necessary information to hand to do the calculation. This patch adds that calculation. Signed-off-by: NPaul Durrant <paul.durrant@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: NEric Dumazet <edumazet@google.com> Acked-by: NWei Liu <wei.liu2@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yang Yingliang 提交于
It already has a NULL pointer check of rtab in qdisc_put_rtab(). Remove the check outside of qdisc_put_rtab(). Signed-off-by: NYang Yingliang <yangyingliang@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-