提交 · 566b5cfb035fb496280be61f976b5281563bfa27 · openeuler / Kernel

22 1月, 2015 18 次提交

perf diff: Fix -o/--order option behavior · 566b5cfb

由 Namhyung Kim 提交于 1月 08, 2015

The prior change fixes default output ordering with each column but it
breaks -o/--order option.  This patch prepends a new hpp fmt struct to
sort list but not to output field list so that it can affect ordering
without adding a new output column.

The new hpp fmt uses its own compare functions which treats dummy
entries (which have no baseline) little differently - the delta field
can be computed without baseline but others (ratio and wdiff) are not.

The new output will look like below:

  $ perf diff -o 2 perf.data.{old,cur,new}
  ...
  # Baseline/0  Delta/1  Delta/2  Shared Object      Symbol
  # ..........  .......  .......  .................  ..........................................
        22.98%   +0.51%   +0.52%  libc-2.20.so       [.] _int_malloc
         5.70%   +0.28%   +0.30%  libc-2.20.so       [.] free
         4.38%   -0.21%   +0.25%  a.out              [.] main
         1.32%   -0.15%   +0.05%  a.out              [.] free@plt
                          +0.01%  [kernel.kallsyms]  [k] intel_pstate_timer_func
                          +0.01%  [kernel.kallsyms]  [k] _raw_spin_lock_irqsave
                          +0.01%  [kernel.kallsyms]  [k] timekeeping_update.constprop.8
                 +0.01%   +0.01%  [kernel.kallsyms]  [k] apic_timer_interrupt
         0.01%            -0.00%  [kernel.kallsyms]  [k] native_read_msr_safe
         0.01%   -0.01%   -0.01%  [kernel.kallsyms]  [k] native_write_msr_safe
         1.31%   +0.03%   -0.06%  a.out              [.] malloc@plt
        31.50%   -0.74%   -0.23%  libc-2.20.so       [.] _int_free
        32.75%   +0.28%   -0.83%  libc-2.20.so       [.] malloc
         0.01%                    [kernel.kallsyms]  [k] scheduler_tick
                 +0.01%           [kernel.kallsyms]  [k] read_tsc
                 +0.01%           [kernel.kallsyms]  [k] perf_adjust_freq_unthr_context.part.82

In above example, the output was sorted by 'Delta/2' column first, and
then 'Baseline/0' and finally 'Delta/1'.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1420677949-6719-8-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

566b5cfb

perf diff: Fix output ordering to honor next column · 56495a8a

由 Namhyung Kim 提交于 1月 08, 2015

When perf diff prints output, it sorts the entries using baseline field
by default, but entries which don't have baseline are not sorted
properly.  This patch makes it sorted by values of next column.

Before:

  # Baseline/0  Delta/1  Delta/2  Shared Object      Symbol
  # ..........  .......  .......  .................  ..........................................
  #
        32.75%   +0.28%   -0.83%  libc-2.20.so       [.] malloc
        31.50%   -0.74%   -0.23%  libc-2.20.so       [.] _int_free
        22.98%   +0.51%   +0.52%  libc-2.20.so       [.] _int_malloc
         5.70%   +0.28%   +0.30%  libc-2.20.so       [.] free
         4.38%   -0.21%   +0.25%  a.out              [.] main
         1.32%   -0.15%   +0.05%  a.out              [.] free@plt
         1.31%   +0.03%   -0.06%  a.out              [.] malloc@plt
         0.01%   -0.01%   -0.01%  [kernel.kallsyms]  [k] native_write_msr_safe
         0.01%                    [kernel.kallsyms]  [k] scheduler_tick
         0.01%            -0.00%  [kernel.kallsyms]  [k] native_read_msr_safe
                          +0.01%  [kernel.kallsyms]  [k] _raw_spin_lock_irqsave
                 +0.01%   +0.01%  [kernel.kallsyms]  [k] apic_timer_interrupt
                          +0.01%  [kernel.kallsyms]  [k] intel_pstate_timer_func
                 +0.01%           [kernel.kallsyms]  [k] perf_adjust_freq_unthr_context.part.82
                 +0.01%           [kernel.kallsyms]  [k] read_tsc
                          +0.01%  [kernel.kallsyms]  [k] timekeeping_update.constprop.8

After:

  # Baseline/0  Delta/1  Delta/2  Shared Object      Symbol
  # ..........  .......  .......  .................  ..........................................
  #
        32.75%   +0.28%   -0.83%  libc-2.20.so       [.] malloc
        31.50%   -0.74%   -0.23%  libc-2.20.so       [.] _int_free
        22.98%   +0.51%   +0.52%  libc-2.20.so       [.] _int_malloc
         5.70%   +0.28%   +0.30%  libc-2.20.so       [.] free
         4.38%   -0.21%   +0.25%  a.out              [.] main
         1.32%   -0.15%   +0.05%  a.out              [.] free@plt
         1.31%   +0.03%   -0.06%  a.out              [.] malloc@plt
         0.01%   -0.01%   -0.01%  [kernel.kallsyms]  [k] native_write_msr_safe
         0.01%                    [kernel.kallsyms]  [k] scheduler_tick
         0.01%            -0.00%  [kernel.kallsyms]  [k] native_read_msr_safe
                 +0.01%   +0.01%  [kernel.kallsyms]  [k] apic_timer_interrupt
                 +0.01%           [kernel.kallsyms]  [k] read_tsc
                 +0.01%           [kernel.kallsyms]  [k] perf_adjust_freq_unthr_context.part.82
                          +0.01%  [kernel.kallsyms]  [k] intel_pstate_timer_func
                          +0.01%  [kernel.kallsyms]  [k] _raw_spin_lock_irqsave
                          +0.01%  [kernel.kallsyms]  [k] timekeeping_update.constprop.8
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1420677949-6719-7-git-send-email-namhyung@kernel.org
[ Fixed up hist_entry__cmp_ method signatures, fallout from making previous cset buildable ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

56495a8a

perf tools: Pass struct perf_hpp_fmt to its callbacks · 87bbdf76

由 Namhyung Kim 提交于 1月 08, 2015

Currently ->cmp, ->collapse and ->sort callbacks doesn't pass
corresponding fmt.  But it'll be needed by upcoming changes in
perf diff command.
Suggested-by: NJiri Olsa <jolsa@kernel.org>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1420677949-6719-6-git-send-email-namhyung@kernel.org
[ fix build by passing perf_hpp_fmt pointer to hist_entry__cmp_ methods ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

87bbdf76

perf diff: Introduce fmt_to_data_file() helper · ff21cef6

由 Namhyung Kim 提交于 1月 08, 2015

The fmt_to_data_file() is to retrieve struct data__file from
perf_hpp_fmt which is embedded in diff_hpp_fmt.  It'll be used by sort
callback functions later.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1420677949-6719-5-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

ff21cef6

perf diff: Print diff result more precisely · ec3d07cb

由 Namhyung Kim 提交于 12月 27, 2014

Current perf diff result is somewhat confusing since it sometimes hide
small result and sometimes there's no result.  So do not hide small
result (less than 0.01%) and print "N/A" if baseline is not
recorded (for ratio and wdiff only).  Blank means the baseline is
available but its pairs are not.

Before:

  # Baseline    Delta  Shared Object      Symbol
  # ........  .......  .................  .........................
  #
       ...
       0.01%   -0.01%  [kernel.kallsyms]  [k] native_write_msr_safe
       0.01%           [kernel.kallsyms]  [k] scheduler_tick
       0.01%           [kernel.kallsyms]  [k] native_read_msr_safe
       0.00%           [kernel.kallsyms]  [k] __rcu_read_unlock
                       [kernel.kallsyms]  [k] _raw_spin_lock
               +0.01%  [kernel.kallsyms]  [k] apic_timer_interrupt
                       [kernel.kallsyms]  [k] read_tsc

After:

  # Baseline    Delta  Shared Object      Symbol
  # ........  .......  .................  .........................
  #
       ...
       0.01%   -0.01%  [kernel.kallsyms]  [k] native_write_msr_safe
       0.01%           [kernel.kallsyms]  [k] scheduler_tick
       0.01%           [kernel.kallsyms]  [k] native_read_msr_safe
       0.00%           [kernel.kallsyms]  [k] __rcu_read_unlock
               +0.01%  [kernel.kallsyms]  [k] _raw_spin_lock
               +0.01%  [kernel.kallsyms]  [k] apic_timer_interrupt
               +0.01%  [kernel.kallsyms]  [k] read_tsc
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1419656793-32756-3-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

ec3d07cb

perf diff: Get rid of hists__compute_resort() · 38259a17

由 Namhyung Kim 提交于 12月 27, 2014

The hists__compute_resort() is to sort output fields based on the
given field/criteria.  This was done without the sort list but as we
added the field to the sort list, we can do it with normal
hists__output_resort() using the ->sort callback.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1419656793-32756-2-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

38259a17

perf tools: Allow use of an exclusive option more than once · 5594b557

由 Namhyung Kim 提交于 1月 10, 2015

The exclusive options are to prohibit use of conflicting options at the
same time.  But it had a side effect that it also limits a such option
can be used at most once.  Currently the only user of the flag is perf
probe and it allows to use such options more than once, but when one
tries to use it, perf will fail like below:

  $ sudo perf probe -x /lib/libc-2.20.so --add malloc --add free
    Error: option `add' cannot be used with add
  ...
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1420886028-15135-1-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

5594b557

perf tools: Document parameterized and symbolic events · f9ab9c19

由 Cody P Schafer 提交于 1月 07, 2015

Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Cody P Schafer <dev@codyps.com>
Cc: Haren Myneni <hbabu@us.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1420679633-28856-5-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

f9ab9c19

perf Documentation: Add event parameters · 98a43e0e

由 Cody P Schafer 提交于 1月 07, 2015

Event parameters are a basic way for partial events to be specified in
sysfs with per-event names given to the fields that need to be filled in
when using a particular event.

It is intended for supporting cases where the single 'cpu' parameter is
insufficient. For example, POWER 8 has events for physical
sockets/cores/cpus that are accessible from with virtual machines. To
keep using the single 'cpu' parameter we'd need to perform a mapping
between Linux's cpus and the physical machine's cpus (in this case Linux
is running under a hypervisor). This isn't possible because bindings
between our cpus and physical cpus may not be fixed, and we probably
won't have a "cpu" on each physical cpu.
Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Cody P Schafer <dev@codyps.com>
Cc: Haren Myneni <hbabu@us.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1420679633-28856-4-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

98a43e0e

perf tools: Extend format_alias() to include event parameters · aaea3617

由 Cody P Schafer 提交于 1月 07, 2015

This causes `perf list pmu` to show parameters for parameterized events
like:

  pmu/event_name,param1=?,param2=?/ [Kernel PMU event]

An example:

  hv_24x7/HPM_TLBIE__PHYS_CORE,core=?/ [Kernel PMU event]
Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Cody P Schafer <dev@codyps.com>
Cc: Haren Myneni <hbabu@us.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1420679633-28856-3-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

aaea3617

perf tools: Support parsing parameterized events · 688d4dfc

由 Cody P Schafer 提交于 1月 07, 2015

Enable event specification like:

	pmu/event_name,param1=0x1,param2=0x4/

Assuming that

	/sys/bus/event_source/devices/pmu/events/event_name

Contains something like

	param2=?,bar=1,param1=?
Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Cody P Schafer <dev@codyps.com>
Cc: Haren Myneni <hbabu@us.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1420679633-28856-2-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

688d4dfc

perf tools: Remove some unused functions from color.c · c8defe24

由 Rickard Strandqvist 提交于 12月 20, 2014

Removes some functions that are not used anywhere:

 color_parse_mem()
 color_parse()

This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: NRickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ramkumar Ramachandra <artagnon@gmail.com>
Link: http://lkml.kernel.org/r/1419079865-354-1-git-send-email-rickard_strandqvist@spectrumdigital.se
[ Remove now unused parse_{attr,color} routines too ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

c8defe24

perf report: Get rid of report__inc_stat() · 590cd344

由 Namhyung Kim 提交于 12月 22, 2014

The report__inc_stat() function collects the number of hist entries in
the session in order to calculate the max size of the progess bar.

It'd be better if it does it during the addition of hist entries so that
it can be used by other places too.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1419223455-4362-2-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

590cd344

perf hists: Introduce function for deleting/removing hist_entry · 956b65e1

由 Arnaldo Carvalho de Melo 提交于 12月 19, 2014

The code being used when decaying and deleting entries from a hists
instance was the same, provide a function to avoid code dup.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-j6ideab7lkakavfvfguw858z@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

956b65e1

perf hists: Rename hist_entry__free to __delete · 6733d1bf

由 Arnaldo Carvalho de Melo 提交于 12月 19, 2014

No logic changes, just to be consistent.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-f7n5y0mvk6gew5185h6fg316@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

6733d1bf

perf tools: Remove EOL whitespaces · 48000a1a

由 Arnaldo Carvalho de Melo 提交于 12月 17, 2014

Janitorial stuff: boredom moment.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-u70i7shys3kths4hzru72bha@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

48000a1a

perf mem: Move the mem_operations global to struct perf_mem · 66024122

由 Arnaldo Carvalho de Melo 提交于 12月 17, 2014

Just like the other parameters, grouping it on the builtin-mem specific
config area: struct perf_mem.
Acked-by: NStephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Fowles <rfowles@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ad8ns5l51ongemfsir3zy09x@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

66024122

perf mem: Enable sampling loads and stores simultaneously · 67121f85

由 Stephane Eranian 提交于 12月 17, 2014

This patch modifies perf mem to default to sampling loads and stores
simultaneously. It could only do one or the other before yet there was
no hardware restriction preventing simultaneous collection. With this
patch, one run is sufficient to collect both.

It is still possible to sample only loads or stores by using the
-t option:
 $ perf mem -t load rec
 $ perf mem -t load rep
Or
 $ perf mem -t store rec
 $ perf mem -t store rep

The perf report TUI will show one event at a time. The store output will
contain a Weight column which will be empty.

In V2, we updated the man pages to reflect the change and also simplify
the initialization of the argv vector passed to the cmd_*() functions as
per LKML feedback.

In V3, we fixed typos in the changelog.
Signed-off-by: NStephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Fowles <rfowles@redhat.com>
Link: http://lkml.kernel.org/r/20141217152355.GA10053@thinkpadSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

67121f85

21 1月, 2015 9 次提交

perf probe: Fix probing kretprobes · 25dd9171

由 Namhyung Kim 提交于 1月 14, 2015

The commit dfef99cd ("perf probe: Use ref_reloc_sym based address
instead of the symbol name") converts kprobes to use ref_reloc_sym (i.e.
_stext) and offset instead of using symbol's name directly.  So on my
system, adding do_fork ends up with like below:

  $ sudo perf probe -v --add do_fork%return
  probe-definition(0): do_fork%return
  symbol:do_fork file:(null) line:0 offset:0 return:1 lazy:(null)
  0 arguments
  Looking at the vmlinux_path (7 entries long)
  Using /lib/modules/3.17.6-1-ARCH/build/vmlinux for symbols
  Could not open debuginfo. Try to use symbols.
  Opening /sys/kernel/debug/tracing/kprobe_events write=1
  Added new event:
  Writing event: r:probe/do_fork _stext+456136
  Failed to write event: Invalid argument
  Error: Failed to add events. Reason: Operation not permitted (Code: -1)

As you can see, the do_fork was translated to _stext+456136.  This was
because to support (local) symbols that have same name.  But the problem
is that kretprobe requires to be inserted at function start point so it
simply checks whether it's called with offset 0.  And if not, it'll
return with -EINVAL.  You can see it with dmesg.

  $ dmesg | tail -1
    [125621.764103] Return probe must be used without offset.

So we need to use the symbol name instead of ref_reloc_sym in case of
return probes.
Reported-by: NJiri Olsa <jolsa@redhat.com>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NJiri Olsa <jolsa@redhat.com>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1421234288-22758-4-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

25dd9171

perf symbols: Introduce 'for' method to iterate over the symbols with a given name · 0a3873a8

由 Arnaldo Carvalho de Melo 提交于 1月 16, 2015

Removing boilerplate from two places, where one would have to find the
first entry, then iterate using symbol__next_by_name + strcmp to see if
the next member had the same name.

Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/n/tip-eh73z8gthv20yowirmx2yk38@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

0a3873a8

perf probe: Do not rely on map__load() filter to find symbols · 564c62a4

由 Namhyung Kim 提交于 1月 14, 2015

The find_probe_trace_events_from_map() searches matching symbol from a
map (so from a backing dso).  For uprobes, it'll create a new map (and
dso) and loads it using a filter.  It's a little bit inefficient in that
it'll read out the symbol table everytime but works well anyway.

For kprobes however, it'll reuse existing kernel map which might be
loaded before.  In this case map__load() just returns with no result.
It makes kprobes always failed to find symbol even if it exists in the
map (dso).

To fix it, use map__find_symbol_by_name() instead.  It'll load a map
with full symbols and sorts them by name.  It needs to search sibing
nodes since there can be multiple (local) symbols with same name.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/1421234288-22758-3-git-send-email-namhyung@kernel.org
[ Use symbol__next_by_name ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

564c62a4

perf symbols: Introduce method to iterate symbols ordered by name · 18bd7264

由 Arnaldo Carvalho de Melo 提交于 1月 16, 2015

Given a symbol, go to the next entry in a rbtree sorted by symbol name.

Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/n/tip-aq210drxprnu2so4dye5xa3j@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

18bd7264

perf symbols: Return the first entry with a given name in find_by_name method · de480999

由 Namhyung Kim 提交于 1月 16, 2015

When a dso contains multiple symbols which have same name, current
dso__find_symbol_by_name() only finds an one of them and there's no way
to get the all symbols without going through the rbtree.

So make symbols__find_by_name() return the first entry with the given
name and the next patch in this series will provide a way to iterate
from there, by the name ordered rb_tree, till a suitable symbol is
found.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/1421234288-22758-2-git-send-email-namhyung@kernel.org
[ Yanked this independent hunk, without changes, from a larger patch  ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

de480999

perf annotate: Fix memory leaks in LOCK handling · 0fb9f2aa

由 Rabin Vincent 提交于 1月 18, 2015

The lock prefix handling fails to free the strdup()'d name as well as
the fields allocated by the instruction parsing.
Signed-off-by: NRabin Vincent <rabin@rab.in>
Cc: Paul Mackerras <paulus@samba.org>
Link: http://lkml.kernel.org/r/1421607621-15005-2-git-send-email-rabin@rab.inSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

0fb9f2aa

perf annotate: Handle ins parsing failures · be81908c

由 Rabin Vincent 提交于 1月 18, 2015

Don't use the ins's ->sncprintf() if the parsing failed.

For example, this fixes the display of "imul %edx".  Without this patch:

       |      imul   (null),(null)

After this patch:

       |      imul   %edx
Signed-off-by: NRabin Vincent <rabin@rab.in>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1421607621-15005-1-git-send-email-rabin@rab.inSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

be81908c

perf scripting perl: Force to use stdbool · 75e0b5f0

由 Wang Nan 提交于 1月 19, 2015

When building perf for arm64 I hit a warning (and be treated as an
error) like below:

 aarch64-oe-linux-gcc -o .../scripts/perl/Perf-Trace-Util/Context.o -c -Wbad-function-cast \
         ... scripts/perl/Perf-Trace-Util/Context.c

 In file included from .../usr/lib64/perl/5.14.3/CORE/perl.h:2464:0,
                  from Context.xs:23:
 /.../usr/lib64/perl/5.14.3/CORE/handy.h:108:0: error: "bool" redefined [-Werror]
  #  define bool char
  ^
 In file included from /.../usr/src/kernel/tools/include/linux/types.h:4:0,
                  from /.../usr/src/kernel/arch/arm64/include/uapi/asm/sigcontext.h:19,
		  from /.../usr/include/bits/sigcontext.h:27,
		  from /.../usr/include/signal.h:340,
		  from /.../usr/include/sys/param.h:28,
		  from /.../usr/lib64/perl/5.14.3/CORE/perl.h:678,
		  from Context.xs:23:
  /.../usr/lib/aarch64-oe-linux/gcc/aarch64-oe-linux/4.9.2/include/stdbool.h:33:0: note: this is the location of the previous definition
    #define bool _Bool

Looks like the failure is caused by arm64 uapi/asm/sigcontext.h, which
includes linux/types.h while other archs not.

Current perl consider this problem:

http://perl5.git.perl.org/perl.git/commit/bd31be4baa3ee68abdb92c0db3200efe0fad903b

However there are users which use old version of perl.

This patch includes stdbool.h before Context.xs and define HAS_BOOL to
prevent perl'e headers define its own 'bool'. Code is learn from perl's
git tree.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1421671397-4659-1-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

75e0b5f0

perf evlist: Remove extraneous 'was' on error message · 267b677e

由 Arnaldo Carvalho de Melo 提交于 1月 19, 2015

  [acme@mica ~]$ trace -p 3330
  Error:  Unable to find debugfs
  Hint:   Was your kernel was compiled with debugfs support?
                          ^^^
                          ^^^
  Hint:   Is the debugfs filesystem mounted?
  Hint:   Try 'sudo mount -t debugfs nodev /sys/kernel/debug'

Fix it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kb9s0xy5z8i51abdu4bgm3rv@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

267b677e

17 1月, 2015 11 次提交

Merge tag 'perf-urgent-for-mingo' of... · d01de238

由 Ingo Molnar 提交于 1月 17, 2015

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

  - Fix segfault when using both the map symtab viewer and annotation
    in the TUI (Namhyung Kim).

  - uClibc build fixes (Alexey Brodkin, Vineet Gupta).

  - bitops/hweight were moved from tools/perf/ too tools/include, move
    some leftovers (Arnaldo Carvalho de Melo)

  - Fix dwarf unwind x86_64 build error (Namhyung Kim)

  - Fix __machine__findnew_thread() error path (Namhyung Kim)

  - Propagate error code when write(2) failed in 'perf probe' (Namhyung Kim)

  - Use dwfl_report_elf() instead of offline in powerpc bits to
    properly handle non prelinked DSOs (Sukadev Bhattiprolu).

  - Fix dwarf unwind using libunwind in 'perf test' (Wang Nan)
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

d01de238

perf tools powerpc: Use dwfl_report_elf() instead of offline. · 6bcf9c1f

由 Sukadev Bhattiprolu 提交于 11月 21, 2014

dwfl_report_offline() works only when libraries are prelinked.

Replace dwfl_report_offline() with dwfl_report_elf() so we correctly
extract debug info even from libraries that are not prelinked.
Reported-by: NJiri Olsa <jolsa@redhat.com>
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: NJiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: http://lkml.kernel.org/r/20150114221045.GA17703@us.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

6bcf9c1f

perf tools: Fix segfault for symbol annotation on TUI · 813ccd15

由 Namhyung Kim 提交于 1月 14, 2015

Currently the symbol structure is allocated with symbol_conf.priv_size
to carry sideband information like annotation, map browser on TUI and
sort-by-name tree node. So retrieving these information from symbol
needs to care about the details of such placement.

However the annotation code just assumes that the symbol is placed after
the struct annotation. But actually there's other info between them.
So accessing those struct will lead to an undefined behavior (usually a
crash) after they write their info to the same location.

To reproduce the problem, please follow the steps below:

1. run perf report (TUI of course) with -v option
2. open map browser (by pressing right arrow key for any entry)
3. search any function (by pressing '/' key and input whatever..)
4. return to the hist browser (by pressing 'q' or left arrow key)
5. open annotation window for the same entry (by pressing 'a' key)
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1421234288-22758-1-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

813ccd15

perf test: Fix dwarf unwind using libunwind. · b93b0967

由 Wang Nan 提交于 1月 14, 2015

Perf tool fails to unwind user stack if the event raises in a shared
object. This patch improves tests/dwarf-unwind.c to demonstrate the
problem by utilizing commonly used glibc function "bsearch". If perf is
not statically linked, the testcase will try to unwind a mixed call
trace.

By debugging libunwind I found that there is a bug in unwind-libunwind:
it always passes 0 as segbase to libunwind, cause libunwind unable to
locate debug_frame entry fir first level ip address (I add some more
debugging output into libunwind to make things clear):

               >_Uarm_dwarf_find_debug_frame: start_ip = 10be98, end_ip = 10c2a4
               >_Uarm_dwarf_find_debug_frame: found debug_frame table `/lib/libc-2.18.so': segbase=0x0, len=7, gp=0x0, table_data=0x449388
               >_Uarm_dwarf_search_unwind_table: call lookup:ip = b6cd3bcc, segbase = 0, rel_ip = b6cd3bcc
               >lookup: e->start_ip_offset = bcf18 (rel_ip = b6cd3bcc)
               >lookup: e->start_ip_offset = 6d314 (rel_ip = b6cd3bcc)
               >lookup: e->start_ip_offset = 33d0c (rel_ip = b6cd3bcc)
                ...
               >lookup: e->start_ip_offset = 15d0c (rel_ip = b6cd3bcc)
               >lookup: e->start_ip_offset = 15c40 (rel_ip = b6cd3bcc)
 >_Uarm_dwarf_search_unwind_table: IP b6cd3bcc inside range b6c12000-b6d4c000, but no explicit unwind info found
                >put_rs_cache: unmasking signals/interrupts and releasing lock
               >_Uarm_dwarf_step: returning -10
 >_Uarm_step: dwarf_step()=-10

This patch passes map->start as segbase to dwarf_find_debug_frame(), so
di will be initialized correctly.

In addition, dso and executable are different when setting segbase. This
patch first check whether the elf is executable, and pass segbase only
for shared object.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1421203007-75799-1-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

b93b0967

perf tools: Avoid build splat for syscall numbers with uclibc · ea1fe3a8

由 Vineet Gupta 提交于 1月 13, 2015

This is due to duplicated unistd inclusion (via uClibc headers + kernel headers)
Also seen on ARM uClibc based tools

   ------- ARC build ---------->8-------------

  CC       util/evlist.o
In file included from
~/arc/k.org/arch/arc/include/uapi/asm/unistd.h:25:0,
                 from util/../perf-sys.h:10,
                 from util/../perf.h:15,
                 from util/event.h:7,
                 from util/event.c:3:
~/arc/k.org/include/uapi/asm-generic/unistd.h:906:0:
warning: "__NR_fcntl64" redefined [enabled by default]
 #define __NR_fcntl64 __NR3264_fcntl
 ^
In file included from
~/arc/gnu/INSTALL_1412-arc-2014.12-rc1/arc-snps-linux-uclibc/sysroot/usr/include/sys/syscall.h:24:0,
                 from util/../perf-sys.h:6,
   ----------------->8-------------------

   ------- ARM build ---------->8-------------

  CC FPIC  plugin_scsi.o
In file included from util/../perf-sys.h:9:0,
                 from util/../perf.h:15,
                 from util/cache.h:7,
                 from perf.c:12:
~/arc/k.org/arch/arm/include/uapi/asm/unistd.h:28:0:
warning: "__NR_restart_syscall" redefined [enabled by default]
In file included from
~/buildroot/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/sys/syscall.h:25:0,
                 from util/../perf-sys.h:6,
                 from util/../perf.h:15,
                 from util/cache.h:7,
                 from perf.c:12:
~/buildroot/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/bits/sysnum.h:17:0:
note: this is the location of the previous definition
   ----------------->8-------------------
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1421156604-30603-4-git-send-email-vgupta@synopsys.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

ea1fe3a8

perf tools: Elide strlcpy warning with uclibc · a83d869f

由 Vineet Gupta 提交于 1月 13, 2015

   ----------------->8------------------
  CC       bench/sched-pipe.o
In file included from builtin-annotate.c:13:0:
util/cache.h:76:15: warning: redundant redeclaration of 'strlcpy'
[-Wredundant-decls]
 extern size_t strlcpy(char *dest, const char *src, size_t size);
               ^
In file included from util/util.h:55:0,
                 from builtin.h:4,
                 from builtin-annotate.c:8:
~/vineetg/arc/gnu/INSTALL_1412-arc-2014.12-rc1/arc-snps-linux-uclibc/sysroot/usr/include/string.h:396:15:
note: previous declaration of 'strlcpy' was here
 extern size_t strlcpy(char *__restrict dst, const char *__restrict src,
   ----------------->8------------------
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1421156604-30603-3-git-send-email-vgupta@synopsys.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

a83d869f

perf tools: Fix statfs.f_type data type mismatch build error with uclibc · db1806ed

由 Alexey Brodkin 提交于 1月 10, 2015

ARC Linux uses the no legacy syscalls abi and corresponding uClibc headers
statfs defines f_type to be U32 which causes perf build breakage

http://git.uclibc.org/uClibc/tree/libc/sysdeps/linux/common-generic/bits/statfs.h

  ----------->8---------------
    CC       fs/fs.o
  fs/fs.c: In function 'fs__valid_mount':
  fs/fs.c:82:24: error: comparison between signed and unsigned integer
  expressions [-Werror=sign-compare]
    else if (st_fs.f_type != magic)
                          ^
  cc1: all warnings being treated as errors
  ----------->8---------------
Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Cody P Schafer <dev@codyps.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Link: http://lkml.kernel.org/r/1420888254-17504-2-git-send-email-vgupta@synopsys.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

db1806ed

tools: Remove bitops/hweight usage of bits in tools/perf · 25cd480e

由 Arnaldo Carvalho de Melo 提交于 1月 13, 2015

We need to use lib/hweight.c for that, just like we do for lib/rbtree.c,
so tools need to link hweight.o. For now do it directly, but we need to
have a tools/lib/lk.a or .so that collects these goodies...
Reported-by: NJan Beulich <JBeulich@suse.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-a1e91dx3apzqw5kbdt7ut21s@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

25cd480e

perf machine: Fix __machine__findnew_thread() error path · 260d819e

由 Namhyung Kim 提交于 1月 09, 2015

When thread__init_map_groups() fails, a new thread should be removed
from the rbtree since it's gonna be freed.  Also update last match cache
only if the function succeeded.
Reported-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1420763892-15535-1-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

260d819e

perf tools: Fix building error in x86_64 when dwarf unwind is on · c6e5e9fb

由 Namhyung Kim 提交于 1月 12, 2015

When build with 'make ARCH=x86' and dwarf unwind is on, there is a
compiling error:

   CC       /home/wn/perf/arch/x86/util/unwind-libdw.o
   CC       /home/wn/perf/arch/x86/tests/regs_load.o
 arch/x86/tests/regs_load.S: Assembler messages:
 arch/x86/tests/regs_load.S:65: Error: operand type mismatch for `push'
 arch/x86/tests/regs_load.S:72: Error: operand type mismatch for `pop'
 make[1]: *** [/home/wn/perf/arch/x86/tests/regs_load.o] Error 1
 make[1]: INTERNAL: Exiting with 25 jobserver tokens available; should be 24!
 make: *** [all] Error 2
 ...

Which is caused by incorrectly undefine macro HAVE_ARCH_X86_64_SUPPORT.
'config/Makefile.arch' tests __x86_64__ only when 'ARCH=x86_64'.
However, when building x86_64 kernel, ARCH=x86 is valid and commonly
used. Build systems, such as yocto, uses x86_64 compiler with 'ARCH=x86'
to build x86_64 perf, which causes mismatching.

As __LP64__ is defined for x86_64 as well, we can consolidate the
__x86_64__ check to the __LP64__ check and get rid of the IS_X86_64
IMHO.

(This patch is made by Namhyung Kim when replying my v1 patch:

https://lkml.org/lkml/2015/1/7/17

I modified the code to remove dependency on RAW_ARCH:

https://lkml.org/lkml/2015/1/7/865

Namhyung Kim didn't provide his SOB in his original email. I add
mine only for my modification.)
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1421029255-23039-1-git-send-email-wangnan0@huawei.com
[ Namhyung provided his S-o-B on a followup to this patch thread on lkml ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

c6e5e9fb

perf probe: Propagate error code when write(2) failed · 7949ba1f

由 Namhyung Kim 提交于 1月 10, 2015

When it failed to write probe commands to the probe_event file in
debugfs, it needs to propagate the error code properly.  Current code
blindly uses the return value of the write(2) so it always uses
-1 (-EPERM) and it might confuse users.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1420886028-15135-4-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

7949ba1f

16 1月, 2015 2 次提交

perf/x86/intel: Fix bug for "cycles:p" and "cycles:pp" on SLM · 33636732

由 Kan Liang 提交于 1月 12, 2015

cycles:p and cycles:pp do not work on SLM since commit:

   86a04461 ("perf/x86: Revamp PEBS event selection")

UOPS_RETIRED.ALL is not a PEBS capable event, so it should not be used
to count cycle number.

Actually SLM calls intel_pebs_aliases_core2() which uses INST_RETIRED.ANY_P
to count the number of cycles. It's a PEBS capable event. But inv and
cmask must be set to count cycles.

Considering SLM allows all events as PEBS with no flags, only
INST_RETIRED.ANY_P, inv=1, cmask=16 needs to handled specially.
Signed-off-by: NKan Liang <kan.liang@intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1421084541-31639-1-git-send-email-kan.liang@intel.com
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

33636732

perf/rapl: Fix sysfs_show() initialization for RAPL PMU · 433678bd

由 Stephane Eranian 提交于 1月 13, 2015

This patch fixes a problem with the initialization of the
sysfs_show() routine for the RAPL PMU.

The current code was wrongly relying on the EVENT_ATTR_STR()
macro which uses the events_sysfs_show() function in the x86
PMU code. That function itself was relying on the x86_pmu data
structure. Yet RAPL and the core PMU (x86_pmu) have nothing to
do with each other. They should therefore not interact with
each other.

The x86_pmu structure is initialized at boot time based on
the host CPU model. When the host CPU is not supported, the
x86_pmu remains uninitialized and some of the callbacks it
contains are NULL.

The false dependency with x86_pmu could potentially cause crashes
in case the x86_pmu is not initialized while the RAPL PMU is. This
may, for instance, be the case in virtualized environments.

This patch fixes the problem by using a private sysfs_show()
routine for exporting the RAPL PMU events.
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150113225953.GA21525@thinkpad
Cc: vincent.weaver@maine.edu
Cc: jolsa@redhat.com
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

433678bd

openeuler / Kernel 1 年多 前同步成功

openeuler / Kernel
1 年多前同步成功