This patch fixes the acpture switch name so that it better reflects its
purpose.
Signed-off-by: NIan Molton <iann@mnementh.co.uk>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Change the Kconfig and Makefile options for Freescale MPC8610 audio drivers
so that they can be compiled as modules, and simplify the Kconfig choices
so that only the platform is selected.

Also fix the naming of the driver files to conform to ALSA standards.

[Removed extraneous SND_SOC dependency -- broonie]
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

The Freescale MPC8610 driver was defining two SOC card (snd_soc_card)
structures, partially initializing each one, but registering only one of
them with ASoC.
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

The PCM operations tables are not exported directly but are instead
included in the platform structure so should be declared static.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This patch takes fixes a number of bugs in the caching code used by
several ASoC codec drivers. Mostly off-by-one fixes.
Signed-off-by: NIan Molton <ian@mnementh.co.uk>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This patch provides suupport for the wm9705 AC97 codec on the Toshiba e740.

Note:
The e740 has a hard headphone switch that turns the speaker off and is not
software detectable or controlable. Also both headphone and speaker amps
share a common output enable.
Signed-off-by: NIan Molton <ian@mnementh.co.uk>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

The Zylonite supports switching the MCLK for the WM9713 between the
AC97CLK and CLK_POUT outputs of the PXA processor via switch SW15 on
the board. This patch adds support for configuring the system to use
CLK_POUT.

Unfortunately it is not possible to read the state of SW15 from software
so this feature is controlled by a module option 'clk_pout' which should
be set to a non-zero value to enable the use of CLK_POUT.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

The WM9713 driver does not support configuring the PLL output frequency
so the output frequency parameter is irrelevant. Allow users to set it
to zero by ignoring it.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This patch adds support for the wm9712 ac97 codec as used in the Toshiba e800
PDA. It includes support for powering up / down the external headphone and
speaker amplifiers on this machine.
Signed-off-by: NIan Molton <ian@mnementh.co.uk>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This patch adds support for the wm9705 ac97 codec as used in the Toshiba e750
PDA. It includes support for powering up / down the external headphone and
speaker amplifiers on this machine.
Signed-off-by: NIan Molton <ian@mnementh.co.uk>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This driver adds support for the wm9705 ac97 codec. The driver supports
audio input and output.
Signed-off-by: NIan Molton <ian@mnementh.co.uk>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

<mach/hardware.h> doesn't exist on AVR32 and therefore this driver won't
build on that arch.  AFAICT this driver doesn't actually use the content
of that header so easiest just to remove it.
Signed-off-by: NBen Nizette <bn@niasdigital.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Remove dependency on sffsdr_fpga_set_codec_fs() when the
SFFSDR FPGA module is not selected.
Signed-off-by: NHugo Villeneuve <hugo@hugovil.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Modify the check for the mux type to also handle the
snd_soc_dapm_value_mux type in a same way as the snd_soc_dapm_mux.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

At 37000 feet somewhere near Greenland I woke up from a half-sleep with the
realisation that __lowest_in_progress() is buggy. After landing I checked
and there were indeed 2 problems with it; this patch fixes both:
* The order of the list checks was wrong
* The locking was not correct.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There has been some light flamewar on lkml about decoding oopses
in modules (as part of the crashdump flamewar).

Now this isn't rocket science, just the markup_oops.pl script
cheaped out and didn't handle modules. But really; a flamewar
all about that?? What happened to C++ in the kernel or reading
files from inside the kernel?

This patch adds module support to markup_oops.pl; it's not the
most pretty perl but it works for my testcases...
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add the Multi-Tech cellular modem firmware to the TI USB serial driver.
This firmware was extracted from:

ftp://ftp.multitech.com/wireless/wireless_linux.zip

Firmware licence: "all firmware components are redistributable in binary
	form" per support@multitech.com
	Copyright (C) 2005 Multi-Tech Systems, Inc.
Signed-off-by: NChris Adams <cmadams@hiwaay.net>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add Multi-Tech cellular modem support to the ti_usb_3410_5052 driver.
Signed-off-by: NChris Adams <cmadams@hiwaay.net>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The TI USB serial driver supports specifying alternate vendor and
product IDs (since the chips can and are used in devices under other
vendor/product IDs).  However, the alternate IDs were not loaded in the
combined product table.  This patch also adds support for loading
alternate firmware for alternate vendor/product IDs.
Signed-off-by: NChris Adams <cmadams@hiwaay.net>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Julia Lawell found a case where a NULL check was misplaced in the
usb-serial code. However as the object in question cannot be NULL the
check can simply be removed.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Julia Lawall found an un-needed check in the neo driver. Her patch moves
the check to cover the code dereferencing it, however it cannot be NULL
anyway so remove the NULL check instead.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The pty changes and updates for window sizing forgot to correct the
kerneldoc
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  kernel/sched.c: add missing forward declaration for 'double_rq_lock'
  sched: partly revert "sched debug: remove NULL checking in print_cfs_rt_rq()"
  cpumask: fix CONFIG_NUMA=y sched.c

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sparc64: Fix cpumask related build failure
  smp_call_function_single(): be slightly less stupid, fix
  smp_call_function_single(): be slightly less stupid
  rcu: fix bug in rcutorture system-shutdown code

* 'for-next' of git://git.o-hand.com/linux-mfd:
  mfd: Fix twl4030-core build
  mfd: Ensure sm501 GPIO pin mode is GPIO when configured
  mfd: dm355 evm MMC/SD card detection
  regulator: PCF50633 pmic driver
  input: PCF50633 input driver
  power_supply: PCF50633 battery charger driver
  rtc: PCF50633 rtc driver
  mfd: PCF50633 gpio support
  mfd: PCF50633 adc driver
  mfd: PCF50633 core driver

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (37 commits)
  MIPS: Only write c0_framemask on CPUs which have this register.
  MIPS: Alchemy: new userspace suspend interface for development boards.
  MIPS: Alchemy: dbdma suspend/resume support.
  MIPS: Alchemy: Fix up PM code on Au1550/Au1200
  MIPS: Alchemy: move calc_clock function.
  MIPS: Alchemy: RTC counter clocksource / clockevent support.
  MIPS: make cp0 counter clocksource/event usable as fallback.
  MIPS: Alchemy: remove cpu_table.
  MIPS: Alchemy: remove get/set_au1x00_lcd_clock().
  MIPS: Print irq handler description
  MIPS: Alchemy: pb1200: update CPLD cascade irq handler.
  MIPS: Alchemy: update core interrupt code.
  MIPS: Alchemy: move commandline mangling out of common code
  MIPS: Alchemy: devboards: consolidate files
  MIPS: Alchemy: Move development board code to common subdirectory
  MIPS: Add Cavium OCTEON to arch/mips/Kconfig
  MIPS: Add defconfig for Cavium OCTEON.
  MIPS: Adjust the dma-common.c platform hooks.
  MIPS: Add Cavium OCTEON slot into proper tlb category.
  MIPS:  Compute branch returns for Cavium OCTEON specific branch instructions.
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits)
  ucc_geth: use correct UCCE macros
  net_dma: acquire/release dma channels on ifup/ifdown
  cxgb3: Keep LRO off if disabled when interface is down
  sfc: SFT9001: Fix condition for LNPGA power-off
  dccp ccid-3: Fix RFC reference
  smsc911x: register irq with device name, not driver name
  smsc911x: fix smsc911x_reg_read compiler warning
  forcedeth: napi schedule lock fix
  net: fix section mismatch warnings in dccp/ccids/lib/tfrc.c
  forcedeth: remove mgmt unit for mcp79 chipset
  qlge: Remove dynamic alloc of rx ring control blocks.
  qlge: Fix schedule while atomic issue.
  qlge: Remove support for device ID 8000.
  qlge: Get rid of split addresses in hardware control blocks.
  qlge: Get rid of volatile usage for shadow register.
  forcedeth: version bump and copyright
  forcedeth: xmit lock fix
  netdev: missing validate_address hooks
  netdev: add missing set_mac_address hook
  netdev: gianfar: add MII ioctl handler
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc: Fix asm/signal.h for 32-bit.
  sparc: Eliminate PROMLIB_INTERNAL as it does nothing
  sparc: Kill exports of prom internal functions
  sparc64: move EXPORT_SYMBOL to the symbols definition
  sparc: move EXPORT_SYMBOL to the symbols definition
  sparc: Create a new file lib/ksyms.c and add export of all symbols defined in assembler in lib/ to this file.
  sparc: Most unaligned_64.c tweaks for branch tracer warnings.
  sparc: Fix sun4d_irq.c build.
  sparc: Update 32-bit defconfig.
  sparc64: fix warnings in psycho_common after ull conversion

* 'for_2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/ISDN-2.6:
  Fix small typo
  misdn: indentation and braces disagree - add braces
  misdn: one handmade ARRAY_SIZE converted
  drivers/isdn/hardware/mISDN: move a dereference below a NULL test
  indentation & braces disagree - add braces
  Make parameter debug writable
  BUGFIX: used NULL pointer at ioctl(sk,IMGETDEVINFO,&devinfo) when devinfo.id not registered

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] Pika Warp appliance watchdog timer
  [WATCHDOG] Enable watchdog timer on GE Fanuc's SBC610
  [WATCHDOG] Basic support for GE Fanuc's FPGA based watchdog timer
  [WATCHDOG] wm8350: Fix section annotations

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (30 commits)
  m68k: Fix --build-id breakage for sun3
  m68k: Wire up sys_restart_syscall
  fbdev: Kill Atari vblank cursor blinking
  m68k: zorro - Use %pR to print resources
  m68k: dio - Kill resource_size_t format warnings
  m68k: dmasound - Kill warn_unused_result warnings
  m68k: zorro - Kill warn_unused_result warnings
  m68k: dio - Kill warn_unused_result warnings
  m68k: atafb - Kill warn_unused_result warnings
  m68k: amiserial - Kill warn_unused_result warnings
  m68k: ser_a2232 - Kill warn_unused_result warnings
  m68k: vme_scc - Kill warn_unused_result warnings
  m68k: sun3 core - Kill warn_unused_result warnings
  m68k: mvme147 core - Kill warn_unused_result warnings
  m68k: mac core - Kill warn_unused_result warnings
  m68k: hp300 core - Kill warn_unused_result warnings
  m68k: atari core - Kill warn_unused_result warnings
  m68k: apollo core - Kill warn_unused_result warnings
  m68k: amiga core - Kill warn_unused_result warnings
  m68k: Kill several external declarations in source files
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: change rsbtbl rwlock to spinlock
  dlm: fix seq_file usage in debugfs lock dump

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  Revert "cpumask: use work_on_cpu in acpi-cpufreq.c for drv_read and drv_write"
  x86: fix apic.c build error on latest git
  x86: fix mpparse.c build error on latest git
  x86: avoid theoretical vmalloc fault loop
  x86, mtrr: fix types used in userspace exported header

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Use own workqueue
  ALSA: hda - add support for Intel DX58SO board
  ASoC: TWL4030: Module unloading fix
  ALSA: hda - create hda_codec.control_mutex for kcontrol->private_value
  ALSA: caiaq - Version 1.3.10
  ALSA: hda - Add quirk for Dell Inspiron Mini9
  ALSA: caiaq - Fix Oops with MIDI
  ASoC: TWL4030: Change the soc_value_enum back to soc_enum
  ASoC: Merge the soc_value_enum to soc_enum struct
  ALSA: hda - Add quirks for Acer Aspire 5930G and 6930G
  ALSA: hda - Add codec ID for MCP73 HDMI
  ALSA: hda - Fix typos for AD1882 codecs
  ALSA: hda - Add quirk for HP 2230s

The FPGA based watchdog timer used by the Pika Warp appliance.
Signed-off-by: NSean MacLennan <smaclennan@pikatech.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Support for the FPGA based watchdog timer on GE Fanuc's SBC610.

This patch enables one of the watchdog timers found on the SBC610. There are
two identical watchdog timers at different offsets in the above mentioned
boards, however the current driver is only capable of supporting one of them.

The watchdog timers are also capable of generating interrupts at a
user-configurable threshold, though support for this operation is currently
not supported by the driver.
Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

GE Fanuc SBC610

Support for the FPGA based watchdog timer as found on GE Fanuc's SBC310,
SBC610 and PPC9A Single Board Computers.

This patch adds support for the watchdog timer found in one of the devices
FPGAs. There are two identical watchdog timers at different offsets in the
above mentioned boards, this driver is capable of supporting one of them.
The watchdog timers are also capable of generating interrupts at a
user-configurable threshold, though support for this operation is currently
not supported by the driver.
Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>