vmalloc_fault() sets user's pgd or p4d from the kernel page table.  Once
it's set, all tables underneath are identical. There is no point of
following the same page table with two separate pointers and make sure they
see the same with BUG().

Remove the pointless checks in vmalloc_fault(). Also rename the kernel
pgd/p4d pointers to pgd_k/p4d_k so that their names are consistent in the
file.
Suggested-by: NAndy Lutomirski <luto@kernel.org>
Signed-off-by: NToshi Kani <toshi.kani@hpe.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Cc: Borislav Petkov <bp@alien8.de>
Cc: Gratian Crisan <gratian.crisan@ni.com>
Link: https://lkml.kernel.org/r/20180314205932.7193-1-toshi.kani@hpe.com

Gratian Crisan reported that vmalloc_fault() crashes when CONFIG_HUGETLBFS
is not set since the function inadvertently uses pXn_huge(), which always
return 0 in this case.  ioremap() does not depend on CONFIG_HUGETLBFS.

Fix vmalloc_fault() to call pXd_large() instead.

Fixes: f4eafd8b ("x86/mm: Fix vmalloc_fault() to handle large pages properly")
Reported-by: NGratian Crisan <gratian.crisan@ni.com>
Signed-off-by: NToshi Kani <toshi.kani@hpe.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20180313170347.3829-2-toshi.kani@hpe.com

Pull NFS client bugfixes from Trond Myklebust:
 "Hightlights include the following stable fixes:

   - NFS: Fix an incorrect type in struct nfs_direct_req

   - pNFS: Prevent the layout header refcount going to zero in
     pnfs_roc()

   - NFS: Fix unstable write completion"

* tag 'nfs-for-4.16-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFS: Fix unstable write completion
  pNFS: Prevent the layout header refcount going to zero in pnfs_roc()
  NFS: Fix an incorrect type in struct nfs_direct_req

When switching to ACPI HW reduced platforms we still want to initialize timers.
Override x86_init.acpi.reduced_hw_init to achieve that.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-acpi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180220180506.65523-3-andriy.shevchenko@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Some ACPI hardware reduced platforms need to initialize certain devices
defined by the ACPI hardware specification even though in principle
those devices should not be present in an ACPI hardware reduced platform.

To allow that to happen, make it possible to override the generic
x86_init callbacks and provide a custom legacy_pic value, add a new
->reduced_hw_early_init() callback to struct x86_init_acpi and make
acpi_reduced_hw_init() use it.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-acpi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180220180506.65523-2-andriy.shevchenko@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This is a preparation patch to allow override the hardware reduced
initialization on ACPI enabled platforms.

No functional change intended.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-acpi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180220180506.65523-1-andriy.shevchenko@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

MKTME_KEY_PROG allows to manipulate MKTME keys in the CPU.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kai Huang <kai.huang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180305162610.37510-6-kirill.shutemov@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Intel PCONFIG targets are enumerated via new CPUID leaf 0x1b. This patch
detects all supported targets of PCONFIG and implements helper to check
if the target is supported.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kai Huang <kai.huang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180305162610.37510-5-kirill.shutemov@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

IA32_TME_ACTIVATE MSR (0x982) can be used to check if BIOS has enabled
TME and MKTME. It includes which encryption policy/algorithm is selected
for TME or available for MKTME. For MKTME, the MSR also enumerates how
many KeyIDs are available.

We would need to exclude KeyID bits from physical address bits.
detect_tme() would adjust cpuinfo_x86::x86_phys_bits accordingly.

We have to do this even if we are not going to use KeyID bits
ourself. VM guests still have to know that these bits are not usable
for physical address.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kai Huang <kai.huang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180305162610.37510-3-kirill.shutemov@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Signed-off-by: NIngo Molnar <mingo@kernel.org>

CPUID.0x7.0x0:EDX[18] indicates whether Intel CPU support PCONFIG instruction.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kai Huang <kai.huang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180305162610.37510-4-kirill.shutemov@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

CPUID.0x7.0x0:ECX[13] indicates whether CPU supports Intel Total Memory
Encryption.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kai Huang <kai.huang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180305162610.37510-2-kirill.shutemov@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This patch addresses a shortcoming in current boot process on machines
that supports 5-level paging.

If a bootloader enables 64-bit mode with 4-level paging, we might need to
switch over to 5-level paging. The switching requires the disabling
paging. It works fine if kernel itself is loaded below 4G.

But if the bootloader put the kernel above 4G (not sure if anybody does
this), we would lose control as soon as paging is disabled, because the
code becomes unreachable to the CPU.

This patch implements a trampoline in lower memory to handle this
situation.

We only need the memory for a very short time, until the main kernel
image sets up own page tables.

We go through the trampoline even if we don't have to: if we're already
in 5-level paging mode or if we don't need to switch to it. This way the
trampoline gets tested on every boot.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180312100246.89175-5-kirill.shutemov@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

If a bootloader enables 64-bit mode with 4-level paging, we might need to
switch over to 5-level paging. The switching requires the disabling
paging. It works fine if kernel itself is loaded below 4G.

But if the bootloader put the kernel above 4G (i.e. in kexec() case),
we would lose control as soon as paging is disabled, because the code
becomes unreachable to the CPU.

To handle the situation, we need a trampoline in lower memory that would
take care of switching on 5-level paging.

Apart from the trampoline code itself we also need a place to store
top-level page table in lower memory as we don't have a way to load
64-bit values into CR3 in 32-bit mode. We only really need 8 bytes there
as we only use the very first entry of the page table. But we allocate a
whole page anyway.

This patch switches 32-bit code to use page table in trampoline memory.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180312100246.89175-4-kirill.shutemov@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

As the first step on using trampoline memory, let's make 32-bit code use
stack there.

Separate stack is required to return back from trampoline and we cannot
user stack from 64-bit mode as it may be above 4G.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180312100246.89175-3-kirill.shutemov@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

When kernel starts in 64-bit mode we inherit the GDT from the bootloader.
It may cause a problem if the GDT doesn't have a 32-bit code segment
where we expect it to be.

Load our own GDT with known segments.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180312100246.89175-2-kirill.shutemov@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

In 4-level paging mode, native_set_p4d() updates the entry in the top-level
page table. With PTI, update to the top-level kernel page table requires
update to the userspace copy of the table as well, using pti_set_user_pgd().

native_set_p4d() uses p4d_val() and pgd_val() to convert types between
p4d_t and pgd_t.

p4d_val() and pgd_val() are paravirtualized and we must not use them in
native helpers, as they crash the boot in paravirtualized environments.

Replace p4d_val() and pgd_val() with native_p4d_val() and
native_pgd_val() in native_set_p4d().
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 91f606a8 ("x86/mm: Replace compile-time checks for 5-level paging with runtime-time checks")
Link: http://lkml.kernel.org/r/20180305081641.4290-1-kirill.shutemov@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

User-space utilities examining crash-kernels need to know if the
crashed kernel was in 5-level paging mode or not.

So write 'pgtable_l5_enabled' to vmcoreinfo, which covers these
three cases:

  pgtable_l5_enabled == 0 when:
   - Compiled with !CONFIG_X86_5LEVEL
   - Compiled with CONFIG_X86_5LEVEL=y while CPU has no 'la57' flag

  pgtable_l5_enabled != 0 when:
   - Compiled with CONFIG_X86_5LEVEL=y and CPU has 'la57' flag
Signed-off-by: NBaoquan He <bhe@redhat.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: douly.fnst@cn.fujitsu.com
Cc: dyoung@redhat.com
Cc: ebiederm@xmission.com
Cc: kirill.shutemov@linux.intel.com
Cc: vgoyal@redhat.com
Link: http://lkml.kernel.org/r/20180302051801.19594-1-bhe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

If trampoline code would need to switch between 4- and 5-level paging
modes, we have to use a page table in trampoline memory.

Having it in trampoline memory guarantees that it's below 4G and we can
point CR3 to it from 32-bit trampoline code.

We only use the page table if the desired paging mode doesn't match the
mode we are in. Otherwise the page table is unused and trampoline code
wouldn't touch CR3.

For 4- to 5-level paging transition, we set up current (4-level paging)
CR3 as the first and the only entry in a new top-level page table.

For 5- to 4-level paging transition, copy page table pointed by first
entry in the current top-level page table as our new top-level page
table.

If the page table is used by trampoline we would need to copy it to new
page table outside trampoline and update CR3 before restoring trampoline
memory.
Tested-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180226180451.86788-6-kirill.shutemov@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This patch clears up trampoline memory and copies trampoline code in
place. It's not yet used though.
Tested-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180226180451.86788-5-kirill.shutemov@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The memory area we found for trampoline shouldn't contain anything
useful. But let's preserve the data anyway. Just to be on safe side.

paging_prepare() would save the data into a buffer.

cleanup_trampoline() would restore it back once we are done with the
trampoline.
Tested-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180226180451.86788-4-kirill.shutemov@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

If a bootloader enables 64-bit mode with 4-level paging, we might need to
switch over to 5-level paging. The switching requires the disabling of
paging, which works fine if kernel itself is loaded below 4G.

But if the bootloader puts the kernel above 4G (not sure if anybody does
this), we would lose control as soon as paging is disabled, because the
code becomes unreachable to the CPU.

To handle the situation, we need a trampoline in lower memory that would
take care of switching on 5-level paging.

This patch finds a spot in low memory for a trampoline.

The heuristic is based on code in reserve_bios_regions().

We find the end of low memory based on BIOS and EBDA start addresses.
The trampoline is put just before end of low memory. It's mimic approach
taken to allocate memory for realtime trampoline.
Tested-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180226180451.86788-3-kirill.shutemov@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The patch explains the LA57 check in more details.
Tested-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180226180451.86788-2-kirill.shutemov@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Pull x86/pti updates from Thomas Gleixner:
 "Yet another pile of melted spectrum related updates:

   - Drop native vsyscall support finally as it causes more trouble than
     benefit.

   - Make microcode loading more robust. There were a few issues
     especially related to late loading which are now surfacing because
     late loading of the IB* microcodes addressing spectre issues has
     become more widely used.

   - Simplify and robustify the syscall handling in the entry code

   - Prevent kprobes on the entry trampoline code which lead to kernel
     crashes when the probe hits before CR3 is updated

   - Don't check microcode versions when running on hypervisors as they
     are considered as lying anyway.

   - Fix the 32bit objtool build and a coment typo"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kprobes: Fix kernel crash when probing .entry_trampoline code
  x86/pti: Fix a comment typo
  x86/microcode: Synchronize late microcode loading
  x86/microcode: Request microcode on the BSP
  x86/microcode/intel: Look into the patch cache first
  x86/microcode: Do not upload microcode if CPUs are offline
  x86/microcode/intel: Writeback and invalidate caches before updating microcode
  x86/microcode/intel: Check microcode revision before updating sibling threads
  x86/microcode: Get rid of struct apply_microcode_ctx
  x86/spectre_v2: Don't check microcode versions when running under hypervisors
  x86/vsyscall/64: Drop "native" vsyscalls
  x86/entry/64/compat: Save one instruction in entry_INT80_compat()
  x86/entry: Do not special-case clone(2) in compat entry
  x86/syscalls: Use COMPAT_SYSCALL_DEFINEx() macros for x86-only compat syscalls
  x86/syscalls: Use proper syscall definition for sys_ioperm()
  x86/entry: Remove stale syscall prototype
  x86/syscalls/32: Simplify $entry == $compat entries
  objtool: Fix 32-bit build

Pull timer fix from Thomas Gleixner:
 "Just a single fix which adds a missing Kconfig dependency to avoid
  unmet dependency warnings"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/atmel-st: Add 'depends on HAS_IOMEM' to fix unmet dependency

Pull RAS fixes from Thomas Gleixner:
 "Two small fixes for RAS/MCE:

   - Serialize sysfs changes to avoid concurrent modificaiton of
     underlying data

   - Add microcode revision to Machine Check records. This should have
     been there forever, but now with the broken microcode versions in
     the wild it has become important"

* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/MCE: Serialize sysfs changes
  x86/MCE: Save microcode revision in machine check records

Pull perf updates from Thomas Gleixner:
 "Another set of perf updates:

   - Fix a Skylake Uncore event format declaration

   - Prevent perf pipe mode from crahsing which was caused by a missing
     buffer allocation

   - Make the perf top popup message which tells the user that it uses
     fallback mode on older kernels a debug message.

   - Make perf context rescheduling work correcctly

   - Robustify the jump error drawing in perf browser mode so it does
     not try to create references to NULL initialized offset entries

   - Make trigger_on() robust so it does not enable the trigger before
     everything is set up correctly to handle it

   - Make perf auxtrace respect the --no-itrace option so it does not
     try to queue AUX data for decoding.

   - Prevent having different number of field separators in CVS output
     lines when a counter is not supported.

   - Make the perf kallsyms man page usage behave like it does for all
     other perf commands.

   - Synchronize the kernel headers"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix ctx_event_type in ctx_resched()
  perf tools: Fix trigger class trigger_on()
  perf auxtrace: Prevent decoding when --no-itrace
  perf stat: Fix CVS output format for non-supported counters
  tools headers: Sync x86's cpufeatures.h
  tools headers: Sync copy of kvm UAPI headers
  perf record: Fix crash in pipe mode
  perf annotate browser: Be more robust when drawing jump arrows
  perf top: Fix annoying fallback message on older kernels
  perf kallsyms: Fix the usage on the man page
  perf/x86/intel/uncore: Fix Skylake UPI event format

Pull locking fix from Thomas Gleixner:
 "rt_mutex_futex_unlock() grew a new irq-off call site, but the function
  assumes that its always called from irq enabled context.

  Use (un)lock_irqsafe() to handle the new call site correctly"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rtmutex: Make rt_mutex_futex_unlock() safe for irq-off callsites

Pull dmaengine fixes from Vinod Koul:
 "Two small fixes are for this cycle:

   - fix max_chunk_size for rcar-dmac for R-Car Gen3

   - fix clock resource of mv_xor_v2"

* tag 'dmaengine-fix-4.16-rc5' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: mv_xor_v2: Fix clock resource by adding a register clock
  dmaengine: rcar-dmac: fix max_chunk_size for R-Car Gen3

Pull GPIO fix from Linus Walleij:
 "This is a single GPIO fix for the v4.16 series affecting the Renesas
  driver, and fixes wakeup from external stuff"

* tag 'gpio-v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: rcar: Use wakeup_path i.s.o. explicit clock handling

On the CP110 components which are present on the Armada 7K/8K SoC we need
to explicitly enable the clock for the registers. However it is not
needed for the AP8xx component, that's why this clock is optional.

With this patch both clock have now a name, but in order to be backward
compatible, the name of the first clock is not used. It allows to still
use this clock with a device tree using the old binding.
Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Merge tag 'kbuild-fixes-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - make fixdep parse kconfig.h to fix missing rebuild

 - replace hyphens with underscores in builtin DTB label names

 - fix typos

* tag 'kbuild-fixes-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: Handle builtin dtb file names containing hyphens
  scripts/bloat-o-meter: fix typos in help
  fixdep: do not ignore kconfig.h
  fixdep: remove some false CONFIG_ matches
  fixdep: remove stale references to uml-config.h

Pull watchdog fixes from Wim Van Sebroeck:

 - f71808e_wdt: Fix magic close handling

 - sbsa: 32-bit read fix for WCV

 - hpwdt: Remove legacy NMI sourcing

* tag 'linux-watchdog-4.16-fixes-2' of git://www.linux-watchdog.org/linux-watchdog:
  watchdog: hpwdt: Remove legacy NMI sourcing.
  watchdog: sbsa: use 32-bit read for WCV
  watchdog: f71808e_wdt: Fix magic close handling

Pull block fixes from Jens Axboe:

 - a xen-blkfront fix from Bhavesh with a multiqueue fix when
   detaching/re-attaching

 - a few important NVMe fixes, including a revert for a sysfs fix that
   caused some user space confusion

 - two bcache fixes by way of Michael Lyle

 - a loop regression fix, fixing an issue with lost writes on DAX.

* tag 'for-linus-20180309' of git://git.kernel.dk/linux-block:
  loop: Fix lost writes caused by missing flag
  nvme_fc: rework sqsize handling
  nvme-fabrics: Ignore nr_io_queues option for discovery controllers
  xen-blkfront: move negotiate_mq to cover all cases of new VBDs
  Revert "nvme: create 'slaves' and 'holders' entries for hidden controllers"
  bcache: don't attach backing with duplicate UUID
  bcache: fix crashes in duplicate cache device register
  nvme: pci: pass max vectors as num_possible_cpus() to pci_alloc_irq_vectors
  nvme-pci: Fix EEH failure on ppc

Merge tag 'for-4.16/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix an uninitialized variable false warning in dm bufio

 - Fix DM's passthrough ioctl support to be race free against an
   underlying device being removed.

 - Fix corner-case of DM raid resync reporting if/when the raid becomes
   degraded during resync; otherwise automated raid repair will fail.

 - A few DM multipath fixes to make non-SCSI optimizations, that were
   introduced during the 4.16 merge, useful for all non-SCSI devices,
   rather than narrowly define this non-SCSI mode in terms of "nvme".

   This allows the removal of "queue_mode nvme" that really didn't need
   to be introduced. Instead DM core will internalize whether
   nvme-specific IO submission optimizations are doable and DM multipath
   will only do SCSI-specific device handler operations if SCSI is in
   use.

* tag 'for-4.16/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm table: allow upgrade from bio-based to specialized bio-based variant
  dm mpath: remove unnecessary NVMe branching in favor of scsi_dh checks
  dm table: fix "nvme" test
  dm raid: fix incorrect sync_ratio when degraded
  dm: use blkdev_get rather than bdgrab when issuing pass-through ioctl
  dm bufio: avoid false-positive Wmaybe-uninitialized warning

Pull rdma fixes from Doug Ledford:

 - Various driver bug fixes in mlx5, mlx4, bnxt_re and qedr, ranging
   from bugs under load to bad error case handling

 - There in one largish patch fixing the locking in bnxt_re to avoid a
   machine hard lock situation

 - A few core bugs on error paths

 - A patch to reduce stack usage in the new CQ API

 - One mlx5 regression introduced in this merge window

 - There were new syzkaller scripts written for the RDMA subsystem and
   we are fixing issues found by the bot

 - One of the commits (aa0de36a “RDMA/mlx5: Fix integer overflow
   while resizing CQ”) is missing part of the commit log message and one
   of the SOB lines. The original patch was from Leon Romanovsky, and a
   cut-n-paste separator in the commit message confused patchworks which
   then put the end of message separator in the wrong place in the
   downloaded patch, and I didn’t notice in time. The patch made it into
   the official branch, and the only way to fix it in-place was to
   rebase. Given the pain that a rebase causes, and the fact that the
   patch has relevant tags for stable and syzkaller, a revert of the
   munged patch and a reapplication of the original patch with the log
   message intact was done.

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (25 commits)
  RDMA/mlx5: Fix integer overflow while resizing CQ
  Revert "RDMA/mlx5: Fix integer overflow while resizing CQ"
  RDMA/ucma: Check that user doesn't overflow QP state
  RDMA/mlx5: Fix integer overflow while resizing CQ
  RDMA/ucma: Limit possible option size
  IB/core: Fix possible crash to access NULL netdev
  RDMA/bnxt_re: Avoid Hard lockup during error CQE processing
  RDMA/core: Reduce poll batch for direct cq polling
  IB/mlx5: Fix an error code in __mlx5_ib_modify_qp()
  IB/mlx5: When not in dual port RoCE mode, use provided port as native
  IB/mlx4: Include GID type when deleting GIDs from HW table under RoCE
  IB/mlx4: Fix corruption of RoCEv2 IPv4 GIDs
  RDMA/qedr: Fix iWARP write and send with immediate
  RDMA/qedr: Fix kernel panic when running fio over NFSoRDMA
  RDMA/qedr: Fix iWARP connect with port mapper
  RDMA/qedr: Fix ipv6 destination address resolution
  IB/core : Add null pointer check in addr_resolve
  RDMA/bnxt_re: Fix the ib_reg failure cleanup
  RDMA/bnxt_re: Fix incorrect DB offset calculation
  RDMA/bnxt_re: Unconditionly fence non wire memory operations
  ...

Pull x86 platform driver fixes from Darren Hart:
 "Correct a module loading race condition between the DELL_SMBIOS
  backend modules and the first user by converting them to bool features
  of the DELL_SMBIOS driver. Fixup the resulting Kconfig dependency
  issue with DCDBAS"

* tag 'platform-drivers-x86-v4.16-6' of git://git.infradead.org/linux-platform-drivers-x86:
  platform/x86: dell-smbios: Resolve dependency error on DCDBAS
  platform/x86: Allow for SMBIOS backend defaults
  platform/x86: dell-smbios: Link all dell-smbios-* modules together
  platform/x86: dell-smbios: Rename dell-smbios source to dell-smbios-base
  platform/x86: dell-smbios: Correct some style warnings

Pull KVM fixes from Radim Krčmář:
 "PPC:

   - Fix guest time accounting in the host

   - Fix large-page backing for radix guests on POWER9

   - Fix HPT guests on POWER9 backed by 2M or 1G pages

   - Compile fixes for some configs and gcc versions

  s390:

   - Fix random memory corruption when running as guest2 (e.g. KVM in
     LPAR) and starting guest3 (e.g. nested KVM) with many CPUs

   - Export forgotten io interrupt delivery statistics counter"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: s390: fix memory overwrites when not using SCA entries
  KVM: PPC: Book3S HV: Fix guest time accounting with VIRT_CPU_ACCOUNTING_GEN
  KVM: PPC: Book3S HV: Fix VRMA initialization with 2MB or 1GB memory backing
  KVM: PPC: Book3S HV: Fix handling of large pages in radix page fault handler
  KVM: s390: provide io interrupt kvm_stat
  KVM: PPC: Book3S: Fix compile error that occurs with some gcc versions
  KVM: PPC: Fix compile error that occurs when CONFIG_ALTIVEC=n